[Q] Xposed installs but doesn't seem to run - Xposed General

Hi All,
Being impressed with the talk about Xposed I found an article about it. Via this forum I installed it on my HTC One M7 (which is unlocked and rooted). After the initial install and restart it says there is a new version 2.6.1 and I follwed the instructions for updating. After that, the app-process mentions version "--" while the most recent version is displayed as 58. I tried to uninstall it and do it again but whatever I try, the message that the framework is not active keep appearing? I searched the forum but was not able to find anything about this. A message about an automatic or manual recovery appears but I'm ignorant how to do that...
Can anyone help me with this?
My phone is a HTC One M7 in Dutch (KPN) and runs Android version 4.4.3 and HTC Sense version 6.0 The HTC SDK API-niveau is 6.25
My end goal is to be able to record my calls. If I did anything stupid I apologize for the inconvenience of this post.
Thanks!

Related

can't flash RUU failed signature check

I tried to install trickdroid 6.0 rom and it kept rebooting as soon as it started up, then I realized it was not supported for sprint yet.
Based on latest 2.16.709.1- Thanks Football / chrisch1974
Android 4.2.2 with Sense UI 5.0
Fully compatible with all HTC One Models
Removed all debug code from /app and /framework
I expect this to mean sprint is included as well. I only found out sprint wasn't supported in the comments.
Since I couldn't get it to boot without restarting after like 15 seconds, I tried to flash other roms but every rom I tried, I had the same problem. I am now trying to flash the RUU Sprint_HTC_One_m7wls_1.29.651.10_RUU. My bootloader is relocked, when I try to run it through the all in one tool, I get a failed signature check 12. I tried to install the RUU through the .exe on PC but the program crashed trying to acquire information from my phone.
I don't really know much about how this stuff works, but did my radio version or something get messed up when I tried to flash a different carrier rom? I have tried searching online but I can't seem to find a solution.
treefingerz said:
I tried to install trickdroid 6.0 rom and it kept rebooting as soon as it started up, then I realized it was not supported for sprint yet.
Based on latest 2.16.709.1- Thanks Football / chrisch1974
Android 4.2.2 with Sense UI 5.0
Fully compatible with all HTC One Models
Removed all debug code from /app and /framework
I expect this to mean sprint is included as well. I only found out sprint wasn't supported in the comments.
Since I couldn't get it to boot without restarting after like 15 seconds, I tried to flash other roms but every rom I tried, I had the same problem. I am now trying to flash the RUU Sprint_HTC_One_m7wls_1.29.651.10_RUU. My bootloader is relocked, when I try to run it through the all in one tool, I get a failed signature check 12. I tried to install the RUU through the .exe on PC but the program crashed trying to acquire information from my phone.
I don't really know much about how this stuff works, but did my radio version or something get messed up when I tried to flash a different carrier rom? I have tried searching online but I can't seem to find a solution.
Click to expand...
Click to collapse
maybe a bad download? I've ran the 1.29.651.10 RUU so I know it works...
i'm having problems too after installing the international roms too even tho they say supported. now i know i'm not the only one.
alright, after trying the setup.exe again this time it didn't crash and I was able to restore factory settings. My computer was probably the problem, I would have ran it a second time last night but the RUU program said my phone was less than 30% and wouldn't run it, so I just charged and went to bed. Just have wait until one of the 4.2.2 roms are compatible with sprint

[Q] I don't have the option to update, what to do?

I got myself an HTC one m7 last week. It was running on android 4.2 and sense 5.0.
I wanted to update it so went to Settings>About phone. There was no option to update. I've attached a screenshot. A friend of mine asked i should install a ruu file but i can't find a suitable one for my phone. it's the hongkong version of HTC one m7 UL. What should I do to update the phone?
And i am having some mic issues too. Some people who i talk on phone can't hear what i am saying properly. Some forums suggested that it gets fixed when the os is updated

[Q] HTC One - Can't install a ROM

Hello All,
I'm a relative newbie and have an issue with my HTC One (M7UL). I've had the phone about a year and it's unlocked (still with S-ON). I've changed the ROM loads of times but now I've got a problem. I think the problem started recently when I couldn't get the OTA updates with Cyanogen to install. I formatted the phone via TWRP, something I've done loads of times and generally do before installing a new ROM. I've tried to sideload several suitable ROM's (CM11, CM10, ARHD etc.), but they all fail. I've never had a problem before. The most recent failure has caused me give up.
I've taken a screenshot following the most recent failure (attached).
Any help would be greatly apperciated.
Many thanks.

HTC one sprint WiFi Bluetooth FM Radio not working [Keep trying to turn on]

The problem is that the WiFi/bt/radio keep trying to turn on and after a long time (in the settings menu, where the buttons for on/off WiFi are located) it says error.
I am located in Ukraine, outside US. I will describe the problem by events in order.
1. Previously WIfi/BT/Radio were all working fine on Kitkat.
2. I Updated my Htc one M7 sprint via fastboot to Android 5.0.2, the official rom update from HTC US website.
3. After update, on the first boot the hands free activation came up. Since I am using a gsm sim, it could not proceed further with the message “Device cannot be activated on a GSM, only On CDMA”
4. I searched for solutions on xda, googled it, with no solutions in sight. Seems like the problem is not common. Anyways, found some loosely related posts on xda that guided,
a) Try to flash the radio with radio flashables. But the solution was not reliable, so i have not yet tried it.
b) That I should delete htcsetupwizar.apk and other sprint related apps from TWRP. Which I did before flashing ViperOne, but it did not work, although I could get into the phone menu but the phone kept rebooting if left untouched, or when power button on the top was tapped.
So currently, my device is running ViperOne 9.0.0, Hboot version 1.61, Radio version 1.01.20.1225, OS version 6.23.651.7, OpenDsp ver 35.120.274.0718
With S-ON
So should I flash the radio from TWRP ? Or consider downgrading the OS ?
Please help. Would be grateful.
If you need any logs or more info. Please write.

After Binary Update - Cannot Make Outgoing Calls...???

Hello Everyone...
Posting here first rather than in the "Update Failure" thread because I'm not so sure I have a "failure" with the update....just an issue after the udpate.
I have 2 cloned HTC M9 phones. I say "cloned" as they are exactly the same make, model, ROM, etc (one business, one personal phone). They have the following information if needed:
Sprint HTC M9
SuperSU Free v2.65
Custom ROM ViperOneM9 3.5.0 with no custom kernal
Android 5.1
HTC Sense 7.0
Kernal (standard) 3.10.49-perf-g26c593c
[email protected] #1
SMP PREEMPT
I updated some apps this as I normally do through Google Play. A little while afterward I was prompted to update the SU Binary. I did so on one of my phones. I hit the TWRP option (on the right side of the prompt screen), nothing happened, phone did not reset so I rebooted into recovery. The update ran automatically and the phone rebooted.
I noticed two issues (perhaps there are more). The huge problem is that I cannot make OUTGOING calls. I use a custom dialer PixelPhone Pro. I click on a contact to dial and nothing happens. I type in number to dial, hit the green "send" button to make the call, nothing happens.
I also tried the stock Phone app....same thing, cannot dial out.
I attempted to update the Profile and PRL for the phone, however, as that appears to need to make a "special call" that function is not working either
The other problem I noticed is with an app I have called Quick Settings. The app is always accessible through the pull-down notifications on the phone. Although the app is still installed and functional, it no longer appears in the pull-down notifications. I tried to reset the option to show it there (turning the option off and back on) and it will not show up despite the proper setting chosen.
I still have full root access as I tried a couple root apps (such as Titanium Pro) and have full root access.
I have been prompted on my other phone to update the SU Binary and I am concerned with doing so. Any idea why this is happening and how I can troubleshoot and fit my outgoing call issue??
THANK YOU all very much!!
Scott
Hey guys....
Anyone else have this issue or similar?? So what are my options....how do I get my phone back to being able to make calls??
Thank you for your help....
Scott
Scudderb said:
Hey guys....
Anyone else have this issue or similar?? So what are my options....how do I get my phone back to being able to make calls??
Thank you for your help....
Scott
Click to expand...
Click to collapse
**UPDATE**
Still problems....
Right after I first updated the binary the "only" problem was that I could not make calls which I could use the other functions of the phone. I rebooted the phone and I cannot reach any function of the phone because I constantly get the message "...the process com.android.phone has stopped" obviously related to the previous problems.
I dirty-flashed the ROM...that did no help. I even tried to flash an older SuperSU version (I don't know what that would have done....I'm running on HOPE now ) and that didn't help. Re-dirty-flashed the ROM a second time. Again that didn't help.
I flashed an old backup and THAT WORKED fine. Problem is that the backup is 6 months old. I could quit and totally clean/wipe/install the ROM and start again from scratch but I reeeeeeallly don't have time for that at the moment.
Is there ANY way I can simply get my com.android.phone process back?? Why did all this happen in the first place??
ANY help is greatly appreciated!! THANK YOU!!!

Categories

Resources