After the factory reset, the screen won't proceed after the logo screen. My computer won't recognize the phone at all. (it tries to install the phone drive and then it fails) it seems like I can go to the recovery boot screen. However, after I've done factory reset/wipe cache, it still won't work. HELPPPP
hwiddack said:
After the factory reset, the screen won't proceed after the logo screen. My computer won't recognize the phone at all. (it tries to install the phone drive and then it fails) it seems like I can go to the recovery boot screen. However, after I've done factory reset/wipe cache, it still won't work. HELPPPP
Click to expand...
Click to collapse
Reflash STOCK ROM via ODIN for your device. You can find it in Sammobile.com.
Related
So I've had Honeycomb 3.2 on my streak for a few weeks now, and it's been working fine. I decided to do a factory reset and start from scratch in order to give the streak to my wife.
For some reason, after I get the boot screen and select factory reset of user data and internal storage, the streak just goes to a blank screen. The keys do light up, but that's it.
Now I can't even go back to how it was or factory reset. Has anyone had this happen before, and how do I fix it?
thanks
Make sure your tablet is charged above sixty percent.
Yeah I read that somewhere. I charged it until the green light came on. I was able to get into recovery mode. The problem is, once there, I click on factory reset, then nothing. Just a blank screen.
Is there another way of restoring the streak?
Yes there is, go to Settings, Privacy, and Factory Reset.
I can't go into android. Stuck at dell logo screen. When I try volume up and power and click on factory reset, it just shows a blank screen.
itsakram said:
I can't go into android. Stuck at dell logo screen. When I try volume up and power and click on factory reset, it just shows a blank screen.
Click to expand...
Click to collapse
In this forum there is a thread titled 514 ROM, this is a complete Honeycomb 3.2 rom. Download the package, save it to an external sd card, rename it "update.pkg" and boot into recovery mode like you did before and choose option 2. This will wipe your tablet and re install Honeycomb.
otnos i really appreciate your help, but the problem is exactly what you just mentioned. when i get into recovery mode, any of the options i pick and press power, the following screen is just blank. nothing happens at all. i can press 2,3,4, or 5 and i just get a blank screen.
can i nvflash the streak and return it to its original state?
itsakram said:
otnos i really appreciate your help, but the problem is exactly what you just mentioned. when i get into recovery mode, any of the options i pick and press power, the following screen is just blank. nothing happens at all. i can press 2,3,4, or 5 and i just get a blank screen.
can i nvflash the streak and return it to its original state?
Click to expand...
Click to collapse
You have two options, NVFlash back to whatever ROM you want to run, or you can flash the stock recovery via fastboot and then load the ROM update.pkg to the external SD and boot into recovery and flash the factory package... (the second way is the preferred way in my opinion)
cdzo72 said:
You have two options, NVFlash back to whatever ROM you want to run, or you can flash the stock recovery via fastboot and then load the ROM update.pkg to the external SD and boot into recovery and flash the factory package... (the second way is the preferred way in my opinion)
Click to expand...
Click to collapse
Yes, I agree.
I'm trying to do a factory reset on my 8GB Nexus 7. It was rooted and unlocked on stock 4.2.1 with stock bootloader/recovery. When I boot into recovery, hold power and tap volume up, I get the menu and pick factory data reset, then select Yes to start the wipe. It then starts to show Formatting /data... and does nothing. I've let it sit for an hour; no change. I've tried temporarily booting TWRP and wiping data that way...same thing - say's it's wiping, but left it for over an hour and it appears to make no progress.
Next Steps? I've tried doing the fastboot flash commands to restore stock but still run into the reason for the factory reset - I'm getting the "enter your password to decrypt" message but none of my passwords are working; apparently factory reset is only way to fix.
go to the main device settings, backup and reset, then press factory data reset.
Wipeout said:
I'm trying to do a factory reset on my 8GB Nexus 7. It was rooted and unlocked on stock 4.2.1 with stock bootloader/recovery. When I boot into recovery, hold power and tap volume up, I get the menu and pick factory data reset, then select Yes to start the wipe. It then starts to show Formatting /data... and does nothing. I've let it sit for an hour; no change. I've tried temporarily booting TWRP and wiping data that way...same thing - say's it's wiping, but left it for over an hour and it appears to make no progress.
Next Steps? I've tried doing the fastboot flash commands to restore stock but still run into the reason for the factory reset - I'm getting the "enter your password to decrypt" message but none of my passwords are working; apparently factory reset is only way to fix.
Click to expand...
Click to collapse
Try using a tool to wipe your tablet.
Sent from my Nexus 7 using xda premium
simms22 said:
go to the main device settings, backup and reset, then press factory data reset.
Click to expand...
Click to collapse
Can't get into the device settings, hence the attempt to wipe data in recovery.
SUDroid said:
Try using a tool to wipe your tablet.
Click to expand...
Click to collapse
Have a tool suggestion? Whether I follow the fastboot guide to restoring to stock or use a tool, I still receive the "Enter password to decrypt storage" message; only way around that is to do a factory reset. I haven't seen any tools that allow me to do a factory reset.
Pull your battery
Sent from my Nexus 7 using XDA Premium HD app
After I try starting my phone, it goes past the logo but never reaches the launching menu. The recovery is not working so I can not factory reset it, Is there another way of factory resetting it?
drgdimitriu said:
After I try starting my phone, it goes past the logo but never reaches the launching menu. The recovery is not working so I can not factory reset it, Is there another way of factory resetting it?
Click to expand...
Click to collapse
try to boot into download mode and flash stock rom through odin
I recently unlocked and rooted my nexus 6, installed twrp for back up. Then I wiped before making a back up. No I have no os on phone. Is there a fix or am I screwed?
Try using fastboot to flash factory images
Just grab a factory image and flash it.
Remember wiping a device does just that. Wipes it clean
The thing is, I can boot into recovery, but my phone does not show up on my laptop. So I am not sure how to load a factory image. Thx in advance for all the help.
If it doesn't connect while in recovery, uninstall/reinstall drivers.
Doogadoo said:
The thing is, I can boot into recovery, but my phone does not show up on my laptop. So I am not sure how to load a factory image. Thx in advance for all the help.
Click to expand...
Click to collapse
Boot in to recovery, choose reboot system, TWRP will say, no OS installed are you sure? answer yes / swipe, TWRP will ask/say your device is not rooted, do you want to root it? Swipe to confirm.
Reboot your phone, pressing power and volume down, choose recovery mode again, your phone should show up on your lappy.
If not, re-install drivers - adb/fastboot as mentioned before.
For some more info and factory image:
http://https://developers.google.com/android/nexus/images
I just got the phone today.
I was trying to follow this guide to install lineageOS https://wiki.lineageos.org/devices/s2/install
Flashed twrp and got up to the 3rd part. I was about to start flashing the rom but the recovery mode was asking me for a password I didn't have. I never set a password on it.
So I tried doing a factory reset and now when I try to reboot it, it gets stuck on the boot screen with the LeEco logo and powered by android etc.
I can still boot into recovery. I tried wiping the cache and dalvik cache and factory reset it again but it didn't help. I didn't try wiping anything else yet since I'm afraid to break it.
I did get twrp on but I did not install any roms yet.
All I did was the factory wipe and now I'm stuck.
I have no important data on it, so I don't care if I have to reset everything.
If I can just get it back to factory default so I can start over, I'd be fine.
What's the recommended course of action?
Sorry I'm kind of a noob at this so detailed instructions would be appreciated.
I figured it out.
In recovery mode, mounted the phone to computer
Computer didn't recognize it at first so had to go to device manager and change the driver to read it as composite usb
Moved over the rom I wanted to flash and just installed it like I was planning to
Another possibility would have been an OTG adapter. You don't have any problem with windows drivers that way
motaku96 said:
I figured it out.
In recovery mode, mounted the phone to computer
Computer didn't recognize it at first so had to go to device manager and change the driver to read it as composite usb
Moved over the rom I wanted to flash and just installed it like I was planning to
Click to expand...
Click to collapse
So you flashed it with ADB?, cuz i have the same problem aswell.
somzkiller said:
So you flashed it with ADB?, cuz i have the same problem aswell.
Click to expand...
Click to collapse
Yes, I found it easier to flash through ADB.