After I try starting my phone, it goes past the logo but never reaches the launching menu. The recovery is not working so I can not factory reset it, Is there another way of factory resetting it?
drgdimitriu said:
After I try starting my phone, it goes past the logo but never reaches the launching menu. The recovery is not working so I can not factory reset it, Is there another way of factory resetting it?
Click to expand...
Click to collapse
try to boot into download mode and flash stock rom through odin
Related
hey there, i'm doing this for a friend
he was updating to JB i believe OTA and it crashed.
It was stuck on the boot screen, but i got pass that, and the phone was back to the way she was using it.
However it kept rebooting randomly
So I tried doing a soft reset, deleting everything, plus i tried doing an updated on samsing kies, cos it shows that the jb update is available
but once the phone reboots, it goes back to the it was when i got it pass the boot screen, like its going back in time.
When it turns on, customer battery power saver is on and it starts downloading 4 apps...
whenever you restart the phone, it goes in a loop of doing the same thing.
I've even tried a hard reset, same thing, boots and starts the loop all over again
this is very confusing
I even tried using Odin to flash the original rom, odin shows success and the phone reboots....back to the loop state...
what can be done?
I will really appreciate the help
thank you
strange situation ... I am guessing that you are on ICS ROM ..
try downloading one of the safe kernel's first and then clear the cache or re-install the stock ROM from this safe kernel ..
Coolkriss said:
strange situation ... I am guessing that you are on ICS ROM ..
try downloading one of the safe kernel's first and then clear the cache or re-install the stock ROM from this safe kernel ..
Click to expand...
Click to collapse
it has 2.3.6 on it right now
how do you change the kernels...that's something i'm not familiar with
My phone is stock rooted, I was trying to make a back up of the stock rom in TWRP. As soon as the backup began, my phone rebooted and now it won't get past the T-Mobile screen. Anyone have any ideas?
re: phone stuck
ozzygarcia said:
My phone is stock rooted, I was trying to make a back up of the stock rom in TWRP. As soon as the backup began, my phone rebooted and now it won't get past the T-Mobile screen. Anyone have any ideas?
Click to expand...
Click to collapse
If I had your problem the first thing I would try is to
remove the battery, wait a minute then re-insert it
then power on the phone.
If that did not fix it, I would go into twrp recovery
and click on the "Wipe" button and do a factory
reset.
Good luck!
Misterjunky said:
If I had your problem the first thing I would try is to
remove the battery, wait a minute then re-insert it
then power on the phone.
If that did not fix it, I would go into twrp recovery
and click on the "Wipe" button and do a factory
reset.
Good luck!
Click to expand...
Click to collapse
I've removed the battery for a few minutes but that didn't help. I didn't want to, but I guess I'm going to have to factory reset.
Having this same issue
ozzygarcia said:
I've removed the battery for a few minutes but that didn't help. I didn't want to, but I guess I'm going to have to factory reset.
Click to expand...
Click to collapse
I am having this same problem and tried to do a factory reset and it is still not working. Is there any other solution you can think of I am thinking of using Odin to flash the firmware since I am able to access the screen that allows you to do so. My only concern is that I would not be able to since I have my phone locked with samsung cloud. Any help would be greatly appreciated!
Pyr0x said:
I am having this same problem and tried to do a factory reset and it is still not working. Is there any other solution you can think of I am thinking of using Odin to flash the firmware since I am able to access the screen that allows you to do so. My only concern is that I would not be able to since I have my phone locked with samsung cloud. Any help would be greatly appreciated!
Click to expand...
Click to collapse
I'm almost positive that if you flash firmware with Odin it unlocks the phone protection on it. So you can do that and get back into your phone.
Thanks for The response! So i tried that, but it failed and now when i turn on mu phone it says "firmware upgrade encountered an issue. please select recovery mode in kies and try again"
After the factory reset, the screen won't proceed after the logo screen. My computer won't recognize the phone at all. (it tries to install the phone drive and then it fails) it seems like I can go to the recovery boot screen. However, after I've done factory reset/wipe cache, it still won't work. HELPPPP
hwiddack said:
After the factory reset, the screen won't proceed after the logo screen. My computer won't recognize the phone at all. (it tries to install the phone drive and then it fails) it seems like I can go to the recovery boot screen. However, after I've done factory reset/wipe cache, it still won't work. HELPPPP
Click to expand...
Click to collapse
Reflash STOCK ROM via ODIN for your device. You can find it in Sammobile.com.
So after trying to install the cyanogenmod nightly, my device started displaying repeated errors about different processes stopping. This would not stop, so I tried to reboot the device. Now the device is attempting to load into the recovery section, but it has just reached the teamwin screen and just keeps going black then flashing back to the screen. Any way I can recover it, or should I finally retire it?
I'm having the same exact issue. Mine started after doing a factory reset from the system settings to try to alleviate some Play Store issues.
I'm just replying in the hope that someone will see this and help us out.
I got the same issue, I tried to factory reset the system and now mine keep flash at the teamwin screen. I cannot connect to the PC neither. Please help.
nicarasu said:
So after trying to install the cyanogenmod nightly, my device started displaying repeated errors about different processes stopping. This would not stop, so I tried to reboot the device. Now the device is attempting to load into the recovery section, but it has just reached the teamwin screen and just keeps going black then flashing back to the screen. Any way I can recover it, or should I finally retire it?
Click to expand...
Click to collapse
You probably didn't factory reset, wipe cache and wipe dalvik cache when you flashed the ROM.
usn.mustanger said:
I'm having the same exact issue. Mine started after doing a factory reset from the system settings to try to alleviate some Play Store issues.
I'm just replying in the hope that someone will see this and help us out.
Click to expand...
Click to collapse
Both of you, you can't factory reset a rooted device from the system settings, this usually wipes out the whole OS because with root the device has access to system partition, when you reset it wipes everything it has permission to remove(with root it has permission to everything).
Factory reset from settings on a nonrooted device doesn't wipe the OS because it doesn't have permission to alter system. That's why it doesn't harm the device and only wipes the data you've put on the phone.
Try flashing TWRP and see if your devices will boot to recovery then. If not, you may have to use fastboot to flash the stock firmware.
boy201 said:
I got the same issue, I tried to factory reset the system and now mine keep flash at the teamwin screen. I cannot connect to the PC neither. Please help.
Click to expand...
Click to collapse
nicarasu said:
So after trying to install the cyanogenmod nightly, my device started displaying repeated errors about different processes stopping. This would not stop, so I tried to reboot the device. Now the device is attempting to load into the recovery section, but it has just reached the teamwin screen and just keeps going black then flashing back to the screen. Any way I can recover it, or should I finally retire it?
Click to expand...
Click to collapse
Strange... is your tablet at least recognized by a computer?
Make sure you connect it to a USB 2.0 port
Hello. After rebranding my phone from PRA-AL00X to PRA-LX1 it's stuck on the Factory reset screen after it gets to 99%. I don't know what to do. I can't enter fastboot either. But I have a question: why when I plug it in, when the factory reset screen is there, my PC makes a sound effect as it's connected to my phone (you know, the usual sound when you plug something into your PC). Can it still be saved? Thank you.
Probably a system partition size complication. Are you using RecoveryOreoNoCheck?
Read this or this.
Something weird happened. So, last night I left my phone to run out of battery. Today, after booting it again it worked. But it rebooted itself after it got into Android, and now it's stuck again on the factory reset process at 99%.
EDIT: I think I managed to figure it out. So, after my phone runs out of battery it restarts normally, into Android. After that I need to let it charge for some time, because of the low battery it may shutdown. I will update soon if I figure it out completely.
EDIT 2: It seems that after I enter my pin to unlock my device it reboots itself. Why is that?
Is there any way I can enter erecovery mode without enabling developer options and usb debugging? Because once I input my pin, my device restarts.
EDIT: Seems like I managed to enter my pin without my device restarting. I think it was restarting because the battery was low.
I have another question. Why after I manage to boot my phone, when I try to reboot to bootloader, it reboots, and enters again the Factory reset screen?
PoweredLights said:
I have another question. Why after I manage to boot my phone, when I try to reboot to bootloader, it reboots, and enters again the Factory reset screen?
Click to expand...
Click to collapse
Like I said in my previous post
Probably a system partition size complication. Are you using RecoveryOreoNoCheck?
Read this or this.
Click to expand...
Click to collapse
So as stated from the user on that link who solved the problem, try formatting the system partition then try to install the update again.
Regarding your other posts, if the update installation obviously failed or encountered some issues then by some coincidence it boots back, that doesn't mean it got fixed. The problem is still there and will become even a bigger problem, if it's not fixed.
You don't have to enable Developer Options or USB Debugging, to boot into eRecovery.
CrimsonBloodfang said:
Like I said in my previous post
So as stated from the user on that link who solved the problem, try formatting the system partition then try to install the update again.
Regarding your other posts, if the update installation obviously failed or encountered some issues then by some coincidence it boots back, that doesn't mean it got fixed. The problem is still there and will become even a bigger problem, if it's not fixed.
You don't have to enable Developer Options or USB Debugging, to boot into eRecovery.
Click to expand...
Click to collapse
The problem is, I can't enter bootloader nor erecovery. I'll try to factory reset with the phone booted up.
EDIT: After factory resetting from settings, when the phone was booted up, it works now. I tried to reboot it and it reboots fine, without the factory reset screen appearing. And thank you very much for your help. I will now try to install Oreo for PRA-LX1.
The only problem I have now, is: my system version is now named NRD90M test-keys.
EDIT: I fixed my phone. I reinstalled through eRecovery the newest available EMUI version and NRD90M test-keys dissapeared. Now it works fine, even if I am on Nougat. I am waiting for the EMUI 8 update, this time not forcing my phone to install it.
PoweredLights said:
The problem is, I can't enter bootloader nor erecovery. I'll try to factory reset with the phone booted up.
EDIT: After factory resetting from settings, when the phone was booted up, it works now. I tried to reboot it and it reboots fine, without the factory reset screen appearing. And thank you very much for your help. I will now try to install Oreo for PRA-LX1.
The only problem I have now, is: my system version is now named NRD90M test-keys.
EDIT: I fixed my phone. I reinstalled through eRecovery the newest available EMUI version and NRD90M test-keys dissapeared. Now it works fine, even if I am on Nougat. I am waiting for the EMUI 8 update, this time not forcing my phone to install it.
Click to expand...
Click to collapse
Hi,
I have the same issue with Phone Always going to factory reset.
Only draining it makes it boot up normally.
I also did the factory reset from within android. Now it does a factory reset lowlevel and again it hangs on 99%.
Did you also have this?