My AndroPlus kernel is too customized for a fall-back kernel,
so here is Advanced Stock Kernel with CWM/MultiROM support
When you push volume up/down button while booting and LED is ON,
CWM will be loaded.
If you push power button it will load recovery in the FOTA kernel.
Requirements
Xperia Z2 [D6502/D6503]
stock 4.4.4
23.0.1.A.3.12 - v1 ~
DO NOT use this kernel with CM or CM based ROM.
This kernel is only for stock or stock based ROM.
To eXistenZ users: I can't guarantee this kernel works with eXistenZ ROM.
Unlocked bootloader
Download
v2 (and later) can be downloaded here
Advanced Stock Kernel v1
Changelog
v2 - Updated CWM to Myself5's one
How to flash
1. Reboot into recovery or bootloader
2. Flash kernel using recovery or fastboot
Recovery - Install zip
fastboot - Extract boot.img from zip and run this command
Code:
fastboot flash boot boot.img
3. Reboot
4. Done!
Kernel sources
https://github.com/WedyDQ10/android_kernel_sony_msm8974ac_adv
XDA:DevDB Information
ADVStockKernel for Z2, Kernel for the Sony Xperia Z2
Contributors
AndroPlus, Myself5, [NUT]
Kernel Special Features:
Version Information
Status: Stable
Created 2015-01-18
Last Updated 2015-02-14
Thanks for the work! I will try it.
D6502 23.0.1.a.0.167
Will it work for D6502 23.0.1.A.0.167?
Yes, same build.
4.4.2 working too?
supercfc said:
Will it work for D6502 23.0.1.A.0.167?
Click to expand...
Click to collapse
This is for 167+
b3ft said:
4.4.2 working too?
Click to expand...
Click to collapse
Answer is above
(not 167+ = 4.4.4 )
is it possibile?
Can i use stock ROM and CM12 as a second ROM? Because i'm afraid to brick my device
dalla96 said:
Can i use stock ROM and CM12 as a second ROM? Because i'm afraid to brick my device
Click to expand...
Click to collapse
Read the OP @dalla96
there stands also this:
DO NOT use this kernel with CM or CM based ROM.
This kernel is only for stock or stock based ROM.
Click to expand...
Click to collapse
So no not on CM roms also not CM 12 !
Nice stuff, thanks for great work!
dalla96 said:
Can i use stock ROM and CM12 as a second ROM? Because i'm afraid to brick my device
Click to expand...
Click to collapse
If your setup is like this, it will work fine:
Main ROM - Stock ROM + This advanced stock kernel
Secondary ROM - CM12 + CM12 kernel or M5 kernel
yes
AndroPlus said:
If your setup is like this, it will work fine:
Main ROM - Stock ROM + This advanced stock kernel
Secondary ROM - CM12 + CM12 kernel or M5 kernel
Click to expand...
Click to collapse
Yes,this is my original idea..how can I have 2 kernel?
dalla96 said:
Yes,this is my original idea..how can I have 2 kernel?
Click to expand...
Click to collapse
Flash zip from TWRP -> Advanced -> MultiROM -> List ROM -> Flash Zip
Poop. Z2 is in a bootloop now. Ideas?
Locklear308 said:
Poop. Z2 is in a bootloop now. Ideas?
Click to expand...
Click to collapse
This kernel is for +167, 3.9 and 3.12 firmware
Do you happen to be running a older firmware
Perhaps -314
Envious_Data said:
This kernel is for +167, 3.9 and 3.12 firmware
Do you happen to be running a older firmware
Perhaps -314
Click to expand...
Click to collapse
I was using the latest... wait... the 314 sounds more familiar!
---------- Post added at 01:28 PM ---------- Previous post was at 01:23 PM ----------
Locklear308 said:
I was using the latest... wait... the 314 sounds more familiar!
Click to expand...
Click to collapse
Or... 167 does as well... Damn. I know I had updated it to the latest OTA
Locklear308 said:
I was using the latest... wait... the 314 sounds more familiar!
---------- Post added at 01:28 PM ---------- Previous post was at 01:23 PM ----------
Or... 167 does as well... Damn. I know I had updated it to the latest OTA
Click to expand...
Click to collapse
This kernel isnt compatible with 314
Try flashing a 314 kernel from a FTF and see if it boots
If so then upgrade to 167 to use this kernel
314 is somewhat outdated, the latest global update is 167 and region/ carier spesific is 3.9 with tiwan having its own 3.12
Envious_Data said:
This kernel isnt compatible with 314
Try flashing a 314 kernel from a FTF and see if it boots
If so then upgrade to 167 to use this kernel
314 is somewhat outdated, the latest global update is 167 and region/ carier spesific is 3.9 with tiwan having its own 3.12
Click to expand...
Click to collapse
Roger
So what does it mean if I did have 167? haha
Locklear308 said:
Roger
So what does it mean if I did have 167? haha
Click to expand...
Click to collapse
Most likely not
There would be only 2 reasons why your phone didnt boot or bootloop and it would be a firmware version mismach(/or too far new old)
Or your bootloader isnt unlocked
Envious_Data said:
Most likely not
There would be only 2 reasons why your phone didnt boot or bootloop and it would be a firmware version mismach(/or too far new old)
Or your bootloader isnt unlocked
Click to expand...
Click to collapse
Totally unlocked already! Woohoo! Ok so Imma hunt down a 314 kernel. So... are there updates that do not go through OTA?
---------- Post added at 01:56 PM ---------- Previous post was at 01:53 PM ----------
Locklear308 said:
Totally unlocked already! Woohoo! Ok so Imma hunt down a 314 kernel. So... are there updates that do not go through OTA?
Click to expand...
Click to collapse
Wait... I did have Ultra Stamina. Isn't that a 167 feature?
Update
I confirmed bootloader is unlocked. And 314 firmware also does not boot... Poop lol
Locklear308 said:
Totally unlocked already! Woohoo! Ok so Imma hunt down a 314 kernel. So... are there updates that do not go through OTA?
---------- Post added at 01:56 PM ---------- Previous post was at 01:53 PM ----------
Wait... I did have Ultra Stamina. Isn't that a 167 feature?
Update
I confirmed bootloader is unlocked. And 314 firmware also does not boot... Poop lol
Click to expand...
Click to collapse
Im not sure
Ota doesnt work for me
I usualy just flash a FTF to update
Try flashing an entire firmware
Flash 167 FTF (just so we are clear you need to use flashtool to flash a FTF)
Related
I am on ICS 4.0.4 Stock ROM; I flashed 3.0.36_Hydracore_v5.34 (screenshot attached)
and now my Gnote is showing only 799 MB ram available in RAM Status.
How can I get back my total RAM ?
Also I want to know Can I flash stable custom ROMs like CyanogenMod 9.1.0
or nightly jellyBin ROM safely without loosing my apps and settings?
Please Help
Thanks in Advance
different kernels show different ram values, some is used by the system so you can never see full
stock shows 808
notecore shows more than that... its normal
---------- Post added at 08:08 PM ---------- Previous post was at 08:08 PM ----------
no.. you need to make a full backup of your apps and data before installing custom roms
nokiamodeln91 said:
different kernels show different ram values, some is used by the system so you can never see full
stock shows 808
notecore shows more than that... its normal
Click to expand...
Click to collapse
Hmmm..I never observed that RAM changes with rom/kernel..i can see 873MB of RAM on stock 4.0.4 with hydracore v7 (oc).. :good:
yes bcuz the change log of v7 says more ram for all roms.. 873 mb
Thanks for the info
nokiamodeln91 said:
yes bcuz the change log of v7 says more ram for all roms.. 873 mb
Click to expand...
Click to collapse
So can I try flashing Hydracore V7
yes you will get 873 mb if ram. but before you flash it, find out how to get off it
Is there any way to get back to stock kernel avoiding factory reset?
desaipa said:
Is there any way to get back to stock kernel avoiding factory reset?
Click to expand...
Click to collapse
Yes simply flash the same rom you were on right now and you will get the stock kernel and its not required to do a factory reset
[email protected]$3K#@R said:
Yes simply flash the same rom you were on right now and you will get the stock kernel and its not required to do a factory reset
Click to expand...
Click to collapse
I am on stock ROM ICS 4.0.4 updated through kies.....
In that case how can I get original stock ICS 4.0.4 ROM ( please provide link)
thanks in advance....
desaipa said:
I am on stock ROM ICS 4.0.4 updated through kies.....
In that case how can I get original stock ICS 4.0.4 ROM ( please provide link)
thanks in advance....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1424997
Here you can find all stock roms
Go to settings<about phone and check the rom version and download the same rom from the above link
---------- Post added at 02:15 PM ---------- Previous post was at 02:12 PM ----------
Download DDLR9 rom
---------- Post added at 02:16 PM ---------- Previous post was at 02:15 PM ----------
And its not really safe to be on a stock kernel
[email protected]$3K#@R said:
http://forum.xda-developers.com/showthread.php?t=1424997
Here you can find all stock roms
Go to settings<about phone and check the rom version and download the same rom from the above link
---------- Post added at 02:15 PM ---------- Previous post was at 02:12 PM ----------
Download DDLR9 rom
---------- Post added at 02:16 PM ---------- Previous post was at 02:15 PM ----------
And its not really safe to be on a stock kernel
Click to expand...
Click to collapse
I thought to go back default stock kernel and then flash hydracore v7 to get same RAM.....
one more question can I flash CM9 stable rom without loosing my data or do I need to follow wipe data step while using CMW recovery to flash any ROM ?
desaipa said:
I thought to go back default stock kernel and then flash hydracore v7 to get same RAM.....
one more question can I flash CM9 stable rom without loosing my data or do I need to follow wipe data step while using CMW recovery to flash any ROM ?
Click to expand...
Click to collapse
I dont understand what u mean??
You are on hydracore v5.4,and want to flash hydracore v7,then why were you thinking about stock kernel
And to go to cm9,you need to wipe the data
use titanium backup. you will never loose your apps and data
[email protected]$3K#@R said:
I dont understand what u mean??
You are on hydracore v5.4,and want to flash hydracore v7,then why were you thinking about stock kernel
And to go to cm9,you need to wipe the data
Click to expand...
Click to collapse
Thanks that helped a lot..... clicked thanks..... your thanks meter is now 100 ......
flashed hydracore v7 and got the remaining RAM now its 874....
Can I root this version:
N7000ZSLM5_N7000OZSLM5_TGY
With superSU-busybox-installer?
And after that I can use to access CWM features Philz-cwm?
If rooted, will I be able to flash hydracore?
provettirodolfo said:
Can I root this version:
N7000ZSLM5_N7000OZSLM5_TGY
With superSU-busybox-installer?
And after that I can use to access CWM features Philz-cwm?
If rooted, will I be able to flash hydracore?
Click to expand...
Click to collapse
You just need to download PhilZ ZSLM5 kernel, reboot into stock recovery, flash kernel, then restart device. And thats it, you are safe and rooted all in one. (follow instructions in OP of Philz thread, everything is explained)
After that, dont flash any kernel please, you will have problems, Hydracore is ICS kernel, and it will not work properly on your ZSLM5 rom.
For now, the best one is PhilZ kernel
You can directly root with Philz LM5 kernel.. just flash it using stock recovery and you will get root and CWM.. no you cannot use hydracore on JB TW rom
Can you provide links to this kernel?
Sent from my GT-N7000 using xda app-developers app
Yeah
http://lmgtfy.com/?q=Philz+kernel+galaxy+note
hello everyone,
I installed N7000XXLSZ for Germany whit Odin, can I use the same kernel+cwm+root from philz for XSLM5 or do I have to wait for the specific?
Thanks in advance
goroth89 said:
hello everyone,
I installed N7000XXLSZ for Germany whit Odin, can I use the same kernel+cwm+root from philz for XSLM5 or do I have to wait for the specific?
Thanks in advance
Click to expand...
Click to collapse
+1
till now all all JB kernels worked for all JB except (LS2 and Ls7).. so you could try one.. if any issues, you could install the rom.
for lonessm
nokiamodeln91 said:
till now all all JB kernels worked for all JB except (LS2 and Ls7).. so you could try one.. if any issues, you could install the rom.
Click to expand...
Click to collapse
Thanks, I'm going to try and let you know
edit: It works
goroth89 said:
Thanks, I'm going to try and let you know
edit: It works
Click to expand...
Click to collapse
can you link to the exact speedmod kernel that you used
would like to get it a try
No SpeedMod.. Philz Kernel LM5
---------- Post added at 06:59 PM ---------- Previous post was at 06:57 PM ----------
goroth89 said:
edit: It works
Click to expand...
Click to collapse
Yes there are roms already with LM5 kernel included
ilegales said:
can you link to the exact speedmod kernel that you used
would like to get it a try
Click to expand...
Click to collapse
from philz thread I used ww*.mediafire.com/file/ad7fze2wx7m4wi0/PhilZ-cwm6-ZSLM5-OZS-4.35-signed.zip
flashed from stock recovery.
Can some one please make a TX 1.67 Deodex Rom please?
tiunilohmu said:
Can some one please make a TX 1.67 Deodex Rom please?
Click to expand...
Click to collapse
try this one
based on hk firmware
CLICK
Leo said:
try this one
based on hk firmware
CLICK
Click to expand...
Click to collapse
mate, are you using Doom's kernel on this new FW? how is it?
i'll probably re-unlock mine coz stock odex is boring, though this new FW i quite like
@OP
Please search, there is one in the general section, by timin8r. Its in the .141 FW thread
gregbradley said:
@OP
Please search, there is one in the general section, by timin8r. Its in the .141 FW thread
Click to expand...
Click to collapse
greg, i've seen the one by tim is for T(.141), OP asked for TX(.67)
Rycon33 said:
greg, i've seen the one by tim is for T(.141), OP asked for TX(.67)
Click to expand...
Click to collapse
My bad...sorry OP.
Rycon33 said:
mate, are you using Doom's kernel on this new FW? how is it?
i'll probably re-unlock mine coz stock odex is boring, though this new FW i quite like
Click to expand...
Click to collapse
i relocked my bootloader now so i cant use any nonstock kernel...
But i think , for now, only the stock kernel can make the best use of the 1.67FW
check this post http://forum.xda-developers.com/showpost.php?p=42122157&postcount=102
now the stock kernel can make the ram be used over 90%, and wont kill the background apps
a stock kernel with dual recoverys has been created.
Leo said:
i relocked my bootloader now so i cant use any nonstock kernel...
But i think , for now, only the stock kernel can make the best use of the 1.67FW
check this post http://forum.xda-developers.com/showpost.php?p=42122157&postcount=102
now the stock kernel can make the ram be used over 90%, and wont kill the background apps
a stock kernel with dual recoverys has been created.
Click to expand...
Click to collapse
Yeah I feel the same way. I'd probably wait for Doom's new version before I unlock again.
Stock it is for the mean time.
Tapatalked from my bricked TX
Leo said:
try this one
based on hk firmware
CLICK
Click to expand...
Click to collapse
Thank you. I will try that.
Leo said:
try this one
based on hk firmware
CLICK
Click to expand...
Click to collapse
Thanks. this deodexed FW can be root or not ?
If its deodexed its probably already rooted.
I wouldn't see the point in deodexing without rooting in the kitchen.
gregbradley said:
If its deodexed its probably already rooted.
I wouldn't see the point in deodexing without rooting in the kitchen.
Click to expand...
Click to collapse
thanks.i've just downloaded and i saw it have su, busybox in system\xbin
but it's flashable zip FW. so can it flash with CWM ?
and flash this deodex FW will unlock bootloader or not ?
i'm on stock odex JB 9.1.B.0.411, Locked bootloader.
devilmaycry2020 said:
thanks.i've just downloaded and i saw it have su, busybox in system\xbin
but it's flashable zip FW. so can it flash with CWM ?
and flash this deodex FW will unlock bootloader or not ?
i'm on stock odex JB 9.1.B.0.411, Locked bootloader.
Click to expand...
Click to collapse
though i added su in deodexed rom, for lock BL,, editting system files will cause reboot
for 411 u should flash back 67 kernel after flash the deodexed patch
Leo said:
though i added su in deodexed rom, for lock BL,, editting system files will cause reboot
for 411 u should flash back 67 kernel after flash the deodexed patch
Click to expand...
Click to collapse
there is a something i didn't clear about "u should flash back 67 kernel after flash the deodexed patch"
Here are all steps i have to do
1. install CWM as this thread http://forum.xda-developers.com/showthread.php?t=2012738 because (not yet install)
2. flash this deodexed FW by CWM
3. flash 67 kernel by flashtool in fastboot
Is it right ?
thank you very much
devilmaycry2020 said:
there is a something i didn't clear about "u should flash back 67 kernel after flash the deodexed patch"
Here are all steps i have to do
1. install CWM as this thread http://forum.xda-developers.com/showthread.php?t=2012738 because (not yet install)
2. flash this deodexed FW by CWM
3. flash 67 kernel by flashtool in fastboot
Is it right ?
thank you very much
Click to expand...
Click to collapse
yeah ur right
but for lock BL device editting system files will cause reboot due to new kernel...
Leo said:
yeah ur right
but for lock BL device editting system files will cause reboot due to new kernel...
Click to expand...
Click to collapse
ok , thanks. you mean that this deodexed FW had change kernel so i have flash stock kernel back? so if that all feature from this deodexed FW can work without problem ? thanks for your help
devilmaycry2020 said:
ok , thanks. you mean that this deodexed FW had change kernel so i have flash stock kernel back? so if that all feature from this deodexed FW can work without problem ? thanks for your help
Click to expand...
Click to collapse
no
this is only system, i did nothing about kernel
all i mean is that , the new firmware is unrootable for lock BL though i have added root permission via android kicthen
one more thing i see there are 2 deodexed FW, which one is the best FW
http://pan.baidu.com/share/link?shareid=582230943&uk=286154023
http://pan.baidu.com/share/link?shareid=3780073824&uk=17867859
devilmaycry2020 said:
one more thing i see there are 2 deodexed FW, which one is the best FW
http://pan.baidu.com/share/link?shareid=582230943&uk=286154023
http://pan.baidu.com/share/link?shareid=3780073824&uk=17867859
Click to expand...
Click to collapse
u could try the 1st one(that's not made by me), which deleted some bloatware sony apps
according to its maker it wont rebbot when editting system files(actually many people said it will, i tried and it did, anyway some people said it wont)
both of the 2 patches are completely based on stock fw
HI Leo !
Could you sent to me the link to download modded file for reboot option in power menu, and mod 5 softkey from this site http://bbs.gfan.com/forum.php?mod=viewthread&tid=6299007&extra=page%3D1
thanks.
Hi,
I've followed the guide to install the speedmod kernel on my Galaxy Note on http://forum.xda-developers.com/showthread.php?t=1673072, using odin, but I have a problem: after Odin said that all was good, the phone is unable to reboot and for 5-6 seconds stay with the screen with the "yellow triangle" and then shut-down.
How can I solve this problem?Or come back to original kernel?
Please help me!!
gunela88 said:
Hi,
I've followed the guide to install the speedmod kernel on my Galaxy Note on http://forum.xda-developers.com/showthread.php?t=1673072, using odin, but I have a problem: after Odin said that all was good, the phone is unable to reboot and for 5-6 seconds stay with the screen with the "yellow triangle" and then shut-down.
How can I solve this problem?Or come back to original kernel?
Please help me!!
Click to expand...
Click to collapse
What rom were you on?
nokiamodeln91 said:
What rom were you on?
Click to expand...
Click to collapse
I had the original rom!
gunela88 said:
I had the original rom!
Click to expand...
Click to collapse
Ofcourse.. but which one? JB, GB, ICS?
nokiamodeln91 said:
Ofcourse.. but which one? JB, GB, ICS?
Click to expand...
Click to collapse
I forgot to specify it: I had the original ICS rom
gunela88 said:
I forgot to specify it: I had the original ICS rom
Click to expand...
Click to collapse
You 100 % sure it was ICS? Install the rom you were on again using odin. Its will put back the original kernel. Just dont wipe while on ICS stock kernel.
nokiamodeln91 said:
You 100 % sure it was ICS? Install the rom you were on again using odin. Its will put back the original kernel. Just dont wipe while on ICS stock kernel.
Click to expand...
Click to collapse
I've check with my brother that has the same original rom (he has a Samsung S2)...and I discover that I had Android 4.1.2 that means JB! :/
Have I to install the JB rom with odin in the same way?
Thanks a lot for your help!
nokiamodeln91 said:
You 100 % sure it was ICS? Install the rom you were on again using odin. Its will put back the original kernel. Just dont wipe while on ICS stock kernel.
Click to expand...
Click to collapse
I've done what you said and ALL WORKS NOW!!
Thank you so much for your help!
Can you suggest me a good rom to install, without doing same errors!? (maybe this could be my last question! )
In this case you just have to flash the JB Speedmod kernel the same way you flash previous one. The phone is not booting because of having an ICS kernel on JB rom.
---------- Post added at 01:49 AM ---------- Previous post was at 01:47 AM ----------
gunela88 said:
I've done what you said and ALL WORKS NOW!!
Thank you so much for your help!
Can you suggest me a good rom to install, without doing same errors!? (maybe this could be my last question! )
Click to expand...
Click to collapse
If you want all the Samsung features then check AryaMod rom.
If you are OK with AOSP, cm 10.2 or omni 4.4 are great roms. It's up to you to try and decide which one suits you the best.
This time for rooting and cwm, use Philz kernel. Methods and explanation in his thread in the Original Development Section.
nokiamodeln91 said:
In this case you just have to flash the JB Speedmod kernel the same way you flash previous one. The phone is not booting because of having an ICS kernel on JB rom.
---------- Post added at 01:49 AM ---------- Previous post was at 01:47 AM ----------
If you want all the Samsung features then check AryaMod rom.
If you are OK with AOSP, cm 10.2 or omni 4.4 are great roms. It's up to you to try and decide which one suits you the best.
This time for rooting and cwm, use Philz kernel. Methods and explanation in his thread in the Original Development Section.
Click to expand...
Click to collapse
Sure, I'm very ok with AOSP and I was thinking about cm 10.2!
Please, clear me up if first of all I have to install the Philz kernel or the rom cm 10.2! (that wasn't the last question! )
First root using Philz kernel.. Then back up your efs folder. Then flash the rom or your choice. Custom rom can only be flashed using cwm recovery.
AryaMod v3 is very good and smooth stock LTA based TW rom. I'm on it since it was issued. As the owner set v4 will be issued in few days. You can try it.
Sent from my GT-N7000 using XDA Premium 4 mobile app
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Huge thanks to @Phil3759 for this excellent work! and for posting it for the Xperia Z1 (honami)... this version is a DIRECT port from the Z1 !
To enter recovery keep tapping the VOLUME UP key when you see the Sony bootlogo!
Download links
Kernels will be provided as recovery flashable update.zips! If you dont have existing recovery just open the kernel package using WinZip/WinRAR/7zip extract the boot.img and flash it using fastboot!
FW: 17.1.1.A.0.402
Advanced Stock Kernel with PhilZ Touch Recovery v01
MD5HASH: 4ee05a3545eb54b8c5f5824cff84e2f7
regards,
DooMLoRD
XDA:DevDB Information
[sirius][CWM Advanced Edition] PhilZ Touch {UNOFFICIAL}, Kernel for the Sony Xperia Z2
Contributors
DooMLoRD, Phil3759, [NUT]
Kernel Special Features: Stock kernel with PhilZ Touch Recovery inbuilt!
Version Information
Status: Stable
Created 2014-05-27
Last Updated 2014-05-27
:good:
Uploaded to main thread and goo server
Phil3759 said:
:good:
Uploaded to main thread and goo server
Click to expand...
Click to collapse
thanks!
can you please provide latest ramdisks for PhilZ recovery?
device tree is same as honami.... just update the following things:
Device Name: Xperia Z2
codename: sirius
DooMLoRD said:
thanks!
can you please provide latest ramdisks for PhilZ recovery?
device tree is same as honami.... just update the following things:
Device Name: Xperia Z2
codename: sirius
Click to expand...
Click to collapse
Please remind me in a few days when I update my repo to better support f2fs code
Will repo sync and rebuild for you
Just remind me as I am going to forget it
Is this just stock kernel. With Philz Touch added.
nintendolinky said:
Is this just stock kernel. With Philz Touch added.
Click to expand...
Click to collapse
yup
DOOMLORD, first of all thanks for your work.
any progress rooting and flashing this to the locked bootloader models?thanks
DooMLoRD said:
yup
Click to expand...
Click to collapse
Ok, in your kernel thread it states it has Philz Touch, but ivr never been able to get it load other than straight after flashing it. Is there an issue somewhere, even if i use your reboot app, it reboots either into twrp or cwm, which i can use, so not a huge issue, would just prefer to use Philz. Thanks.
Sent from my D6503 using Tapatalk
Does this work well with the 402 update, Philz recovery was always my favourite recovery on SGS3, not seen many posts in here recently so looking for opinions.
Plan is to get unlock code from Sony, use FlashTool to unlock the bootloader, use Flashtool to flash the boot img from the first post in this thread & then flash superSU, is that the bets way to go about it?
BanziBaby said:
Does this work well with the 402 update, Philz recovery was always my favourite recovery on SGS3, not seen many posts in here recently so looking for opinions.
Plan is to get unlock code from Sony, use FlashTool to unlock the bootloader, use Flashtool to flash the boot img from the first post in this thread & then flash superSU, is that the bets way to go about it?
Click to expand...
Click to collapse
Yes, it's dedicated for the .402 update
Your plan is valid, although keep in mind that Doomkernel has also Philz integrated.
Cheers for the reply mate. Is there a way to flash Philz with just the stock kernel or does it have to DoomLord's advanced kernel?
BanziBaby said:
Cheers for the reply mate. Is there a way to flash Philz with just the stock kernel or does it have to DoomLord's advanced kernel?
Click to expand...
Click to collapse
it is the stock kernel the ramdisk has been "edited" to include philz recovrey
Hi OP,
I am using Build version: 6.29.8 - Xperia Z1 on Xperia X2 D6503.
(maybe slightly older than the latest one?)
I just tried to "Custom backup" my /sdcard partition for file recovery purpose.
However, the "Backup size" was 0.
So i wonder if the backup "sd-ext" function is still working on the PhilZ version.
Thanks in advance.
Will this work on D6502 and do i need an unlocked bootloader for it. Please somebody suggest. Thanks
ive flashed this
however i cant seem to access the recovery partition?
Great work guys !
Will this work with CM11, i currently have the latest CM11 NIGHTLY installed along with CWM recovery 6.0.5.0.
EDIT:
Also, i installed the latest firmware .314 before going to CM11, will flashing this change my kernel to anything other than what i have now ?
Thanks !
S M G said:
Great work guys !
Will this work with CM11, i currently have the latest CM11 NIGHTLY installed along with CWM recovery 6.0.5.0.
EDIT:
Also, i installed the latest firmware .314 before going to CM11, will flashing this change my kernel to anything other than what i have now ?
Thanks !
Click to expand...
Click to collapse
If you flash CM11 then you will have CM11 kernel
waynekirby said:
If you flash CM11 then you will have CM11 kernel
Click to expand...
Click to collapse
Thanks,
So even if i currently have CM installed, flashing this wont change my CM kernel ???, or will i have to reflash CM to get CM kernel ?
S M G said:
Thanks,
So even if i currently have CM installed, flashing this wont change my CM kernel ???, or will i have to reflash CM to get CM kernel ?
Click to expand...
Click to collapse
This version is for stock based roms, older ones at that. So no, CM won't work with this installed unfortunately.
waynekirby said:
If you flash CM11 then you will have CM11 kernel
Click to expand...
Click to collapse
waynekirby said:
This version is for stock based roms, older ones at that. So no, CM won't work with this installed unfortunately.
Click to expand...
Click to collapse
DAMN !
Okay thanks for the info mate. :good: