Hello Folks,
First I have to say that I watched the noob video and read everything about E:Error in /mnt/sdcard/cm-10.0.0.-galaxysmtd.zip (Status 7) on this forum and what google gave me.
My situation:
PC OS is Windows 7 64bit (if someone needs to know)
Phone:
Samsung Galaxy S GT-I9000
SSN: I9000GSMH
What happend:
I bought a used phone about two months ago with latest installed stock rom 2.3.5 it is. Then i downloaded cm-10-20121126-NIGHTLY-galaxysmtd and followed the instructions on wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. I installed CWM with Heimdall Suite. Everything worked well.
Today I decided to install a newer version of CM, I downloaded the cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd and copied them both on the phone memory. I turned off the phone and turned it on in recovery mod, and I got the recovery mode that was on cm-10-20121126-NIGHTLY-galaxysmtd installed. It wasn't the standard CWM that I installed with Heimdall Suite. I wiped with it data and cache and installed cm-10-20121210-NIGHTLY-galaxysmtd and then rebooted the phone. But the phone got stuck and didn't want to reboot. So i tried to go to recovery mod again to reinstall the cm-10.0.0-galaxysmtd but the phone couldn't access the recovery mod anymore.
After that I reinstalled with Heimdall Suite the ClockwordMod Recovery v2.5.1.0 SpeedMod Kernel like the first time I did. and successfully booted to recovery mod and again wiped cache and data and tried to install cm-10.0.0-galaxysmtd when i got the error
This is the image, just copy/paste in address bar.
imageshack.us/f/685/07032008448.jpg
So, now my phone has no OS installed.
There are some other issues too, I can't mount my external sd card in CWM, why, I don't know, so I only have cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd on my phone memory to install.
I would really really like if someone could help me to solve my problem, I have no other phone. And please when you tell to install something give me the needed link because I really downloaded a lot of things that didn't work.
adobih said:
Hello Folks,
First I have to say that I watched the noob video and read everything about E:Error in /mnt/sdcard/cm-10.0.0.-galaxysmtd.zip (Status 7) on this forum and what google gave me.
My situation:
PC OS is Windows 7 64bit (if someone needs to know)
Phone:
Samsung Galaxy S GT-I9000
SSN: I9000GSMH
What happend:
I bought a used phone about two months ago with latest installed stock rom 2.3.5 it is. Then i downloaded cm-10-20121126-NIGHTLY-galaxysmtd and followed the instructions on wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. I installed CWM with Heimdall Suite. Everything worked well.
Today I decided to install a newer version of CM, I downloaded the cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd and copied them both on the phone memory. I turned off the phone and turned it on in recovery mod, and I got the recovery mode that was on cm-10-20121126-NIGHTLY-galaxysmtd installed. It wasn't the standard CWM that I installed with Heimdall Suite. I wiped with it data and cache and installed cm-10-20121210-NIGHTLY-galaxysmtd and then rebooted the phone. But the phone got stuck and didn't want to reboot. So i tried to go to recovery mod again to reinstall the cm-10.0.0-galaxysmtd but the phone couldn't access the recovery mod anymore.
After that I reinstalled with Heimdall Suite the ClockwordMod Recovery v2.5.1.0 SpeedMod Kernel like the first time I did. and successfully booted to recovery mod and again wiped cache and data and tried to install cm-10.0.0-galaxysmtd when i got the error
This is the image, just copy/paste in address bar.
imageshack.us/f/685/07032008448.jpg
So, now my phone has no OS installed.
There are some other issues too, I can't mount my external sd card in CWM, why, I don't know, so I only have cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd on my phone memory to install.
I would really really like if someone could help me to solve my problem, I have no other phone. And please when you tell to install something give me the needed link because I really downloaded a lot of things that didn't work.
Click to expand...
Click to collapse
you having the wrong CWm installed, you can go to this link to download the cf-root kernel. http://forum.xda-developers.com/showthread.php?t=788108 hope this will help .
BTW when flashing JB from GB you need to flash CM9 then follow by CM10, if you can try flash it from GB 2.3.6 (E.g xxjvu)
i try flashing JB from GB is work if i flash twice but i got missing IMEI. so i suggest you following this step to flash.
GB(stock rom with ROOT) - ICS(CM7) - JB(CM10)
Samtan4326 said:
you having the wrong CWm installed, you can go to this link to download the cf-root kernel. http://forum.xda-developers.com/showthread.php?t=788108 hope this will help .
BTW when flashing JB from GB you need to flash CM9 then follow by CM10, if you can try flash it from GB 2.3.6 (E.g xxjvu)
i try flashing JB from GB is work if i flash twice but i got missing IMEI. so i suggest you following this step to flash.
GB(stock rom with ROOT) - ICS(CM7) - JB(CM10)
Click to expand...
Click to collapse
First off all thanks for helping.
I tried this one:
CF-ROOT-4.4-I9000BGJW5-1187857
CF-Root-4.4-I9000BOJW6-CL1177078
CF-Root-JP6-v1.2-Busybox-1.17.1 (this one didn't want to start recovery at all)
CF-Root-XX_OXA_JW4-v4.4-CWM3RFS
all I got from all of them is this
imageshack.us/f/805/08032008449.jpg (copy link to address bar )
Member Chainfire said "THIS IS NOT A ROM - it is only a kernel. You need to have a firmware already on your device"
I don't know really what that means. Probably that I have to install something else too, but what ?
Please can you tell me ?
And which of these CF-Roots is the right one, or the newest one, or how do recognize that ?
Thanks everyone who helps me.
eba
Well, I solved my problem, now i have cm-10.0.0-galaxysmtd ROM installed. If someone has this problem, this is one way how to solve it (but doesn't mean it's the best one).
If you have no ROM installed on your I9000 and don't know which kernel to use, try this way:
Watch this video on YouTube that user "Puggered UK" uploaded:
youtube.com/watch?v=iRnH13sRAIc
- You can skip to 1.52 because you don't have any ROM on your phone, and download the EZ Odin package from the link in the About section (4shared.com/archive/TuHUfVjA/EZOdin.html).
- Start EZ Odin, put the PIT, PDA, PHONE and CSC file in the right box, connect your phone in download mode to the PC and press START, and wait till the process is complete.
- After a while you should have Android 2.3.? installed on your phone.
- Update Google market to Google play, then update ROM Manager, and start ROM Manager. Choose to Flash Clockwork Mod Recovery, choose your phone and flash it.
- Copy on your internal sd memory cm-10.0.0-galaxysmtd that you downloaded from CyanogenMod web site.
- Restart your phone in Recovery mod, wipe data/cache, and install cm-10.0.0-galaxysmtd from internal sd card.
- Then, when it's done restart the phone, and do the last step again in Cyanogen CW recovery.
- After it's done, restart the phone and you will have CM 10 on your phone installed.
Or just watch the video and you will se what to do.
adobih said:
Well, I solved my problem, now i have cm-10.0.0-galaxysmtd ROM installed. If someone has this problem, this is one way how to solve it (but doesn't mean it's the best one).
If you have no ROM installed on your I9000 and don't know which kernel to use, try this way:
Watch this video on YouTube that user "Puggered UK" uploaded:
youtube.com/watch?v=iRnH13sRAIc
- You can skip to 1.52 because you don't have any ROM on your phone, and download the EZ Odin package from the link in the About section (4shared.com/archive/TuHUfVjA/EZOdin.html).
- Start EZ Odin, put the PIT, PDA, PHONE and CSC file in the right box, connect your phone in download mode to the PC and press START, and wait till the process is complete.
- After a while you should have Android 2.3.? installed on your phone.
- Update Google market to Google play, then update ROM Manager, and start ROM Manager. Choose to Flash Clockwork Mod Recovery, choose your phone and flash it.
- Copy on your internal sd memory cm-10.0.0-galaxysmtd that you downloaded from CyanogenMod web site.
- Restart your phone in Recovery mod, wipe data/cache, and install cm-10.0.0-galaxysmtd from internal sd card.
- Then, when it's done restart the phone, and do the last step again in Cyanogen CW recovery.
- After is done, restart the phone and you will have CM 10 on your phone installed.
Or just watch the video and you will se what to do.
Click to expand...
Click to collapse
hey,
had that problem too, yesterday. will try your suggestions later and report back!
hope it helps...
Grz
beckzz said:
hey,
had that problem too, yesterday. will try your suggestions later and report back!
hope it helps...
Grz
Click to expand...
Click to collapse
Well, I help you as much as I can and know, just write me where you stuck. And if you have some difficulties explaining it in English, dann kannst du mir auch auf deutsch schreiben, das verstehe ich auch
I had this status 7 thing 2 yesterday while installing cm10. It also seemed I couldnt get into recovery. What I had to do is flash the zip 4 times. First time it got stuck at boot.
So I took battery out & try to get in to recovery (volume up+home button+power button & -->release buttons the moment u see bootanimation<--) but it started bootlooping/got stuck again.
So I took battery out again, did the 3 button combo for the second time & I waited a little longer, a minute maybe 2 & it went to recovery. (I guess the first time it didnt went straight to recovery like it normally does, I wasnt patient enough). If not getting into recovery with waiting the first time just try to keep getting in recovery with 3 button combo & wait a couple of minutes. Eventually it does. I had the same thing 2 months ago coming from jb-->ics-->cm10, thats how I remembered.
Didnt wipe a thing just went straight to the zipfile & flashed it in total 4 or 5 times till it said install completed on the screen. Didnt wipe nothing in between the flashing
Then flashed gapps & voila
Donovan662 said:
I had this status 7 thing 2 yesterday while installing cm10. It also seemed I couldnt get into recovery. What I had to do is flash the zip 4 times. First time it got stuck at boot.
So I took battery out & try to get in to recovery (volume up+home button+power button & release buttons the moment u see bootanimation) but it started bootlooping/got stuck again.
So I took battery out again, did the 3 button combo for the second time & I waited a little longer, a minute maybe 2 & it went to recovery. (I guess the first time it didnt went straight to recovery like it normally does, I wasnt patient enough)
Didnt wipe a thing just went straight to the zipfile & flashed it in total 4 or 5 times till it said install completed on the screen
Then flashed gapps & voila
Click to expand...
Click to collapse
I tried like hundred times or more, but every time with the same result and I also tried with different kernels without success. Maybe some other error caused your status 7 error than mine. But anyway, it's always good to try all possibilities to resolve the problem.
Haha I went crazy not getting into recovery 2 months ago I did it at least 15 times till it eventually got into recovery. Weird cuz I released it the moment I saw cyanogen boot animation. I had to wait a lil longer after releasing so it seems & better timing maybe but only with flashing cm10 from stock. The error was the same tho I saw your picture
Donovan662 said:
Haha I went crazy not getting into recovery 2 months ago I did it at least 15 times till it eventually got into recovery. Weird cuz I released it the moment I saw cyanogen boot animation. I had to wait a lil longer after releasing so it seems & better timing maybe but only with flashing cm10 from stock. The error was the same tho I saw your picture
Click to expand...
Click to collapse
Unfortunately I wasn't that lucky, but I tell you something else. Now I know that no matter what I do and how badly i brick my phone I can always use that method to bring it to life back. So it's kind of final help that works if nothing else works
by the way did you apply sdcard:update zip? Or choose zip from sd card?
Donovan662 said:
by the way did you apply sdcard:update zip? Or choose zip from sd card?
Click to expand...
Click to collapse
I choose zip from sd card because I forgot to rename the file before copying to sd card, and when I lost my bricked my phone it was already to late to rename it. But i don't think that that was the problem, I mean it's just a name string that has no meaning after all.
hey guys,
finally i made it...
thx adobih for your offer, but i'll try to do it in english...think(hope) my english is not that bad
so my problem was the following, slightly different from yours:
i bought a used Galaxy S I9000 for my girlfried as a christmas present cause her Galaxy Ace is the worst Android-phone i ever saw ^^
this "new" Galaxy S has never been rooted before, it never enjoyed a custom ROM - completely stock with 2.2.1 froyo ^^
Here is, what i did to get cm10 stable to work:
1. Updated android to latest official android 2.3.6 with Samsung Kies
2. then i followed the step "Installing the ClockworkMod Recovery" from here
--- ATTENTION: Heimdall 1.3.2 screwed things up (due to a bug i think, only download-mode was available afterwards), use Heimdall 1.3.1 to be safe
3. then i pushed cm 9.1 stable, cm 10.0 stable and latest gapps for 10.0 to the device
4. then i flashed cm 9.1 stable via CWM - an Error occured
5. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
6. device reboots and starts to install CM 9.1 Stable on its own
7. booted to the now "new" CWM installed by cm 9.1 zip
8. flashed cm 9.1 zip again
8. booted cm 9.1 normally, everything was working fine
9. booted into cwm
10. flashed cm 10.0 zip - an error occured
11. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
12. device reboots and starts to install CM 10.0 Stable on its own
13. booted to the now "new" CWM installed by cm 10.0 zip
14. flashed cm 10.0 zip again
15. a warning occured "incompatible filesystem, flash again to confirm"
16. flashed cm 10.0 zip again
17. booted cm 10.0 normally, everything was working fine
18. booted CWM again, flashed gapps
19. booted cm 10.0 normally, everything was working fine
I was not able to flash cm 10.0 directly after flashing codeworxs kernel with heimdall. think this is related to changed partition sizes and stuff...
device only booted to CWM again, i was not able to boot the system - bootloop. Once i tried to flash cm10, there was no success when trying to flash cm 9 after that.
i tried it 3-4 times to flash cm 10 directly with no success. i checked md5 sums of the downloaded files, but everything was fine.
the detour with cm 9.1 was the only way to get it to work.
after trying to flash cm10 directly it always screwed something and was not able to get any further.
to start again, i had to go back to stock with odin. For that i used these instructions and files. (its in german, but very well illustrated, so all of you should be able to follow the steps).
When starting from stock, you can follow the steps above and everything should be fine.
took me some hours to figure out the correct order of the steps....
this is a slightly different problem as the one in op, so i decided to provide my solution here.
the heimdall 1.3.2-bug occured with the i9000 of a friend of mine, too. only heimdall 1.3.1 did what it was supposed to.
for all people interested: i decided to flash semaphore kernel for better customization options....running pretty well
EDIT: thx to everybody in this thread posting your experiences, all together it pointed me to the solution.. THX!
Grz
beckzz said:
hey guys,
finally i made it...
thx adobih for your offer, but i'll try to do it in english...think(hope) my english is not that bad
so my problem was the following, slightly different from yours:
i bought a used Galaxy S I9000 for my girlfried as a christmas present cause her Galaxy Ace is the worst Android-phone i ever saw ^^
this "new" Galaxy S has never been rooted before, it never enjoyed a custom ROM - completely stock with 2.2.1 froyo ^^
Here is, what i did to get cm10 stable to work:
1. Updated android to latest official android 2.3.6 with Samsung Kies
2. then i followed the step "Installing the ClockworkMod Recovery" from here
--- ATTENTION: Heimdall 1.3.2 screwed things up (due to a bug i think, only download-mode was available afterwards), use Heimdall 1.3.1 to be safe
3. then i pushed cm 9.1 stable, cm 10.0 stable and latest gapps for 10.0 to the device
4. then i flashed cm 9.1 stable via CWM - an Error occured
5. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
6. device reboots and starts to install CM 9.1 Stable on its own
7. booted to the now "new" CWM installed by cm 9.1 zip
8. flashed cm 9.1 zip again
8. booted cm 9.1 normally, everything was working fine
9. booted into cwm
10. flashed cm 10.0 zip - an error occured
11. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
12. device reboots and starts to install CM 10.0 Stable on its own
13. booted to the now "new" CWM installed by cm 10.0 zip
14. flashed cm 10.0 zip again
15. a warning occured "incompatible filesystem, flash again to confirm"
16. flashed cm 10.0 zip again
17. booted cm 10.0 normally, everything was working fine
18. booted CWM again, flashed gapps
19. booted cm 10.0 normally, everything was working fine
I was not able to flash cm 10.0 directly after flashing codeworxs kernel with heimdall. think this is related to changed partition sizes and stuff...
device only booted to CWM again, i was not able to boot the system - bootloop. Once i tried to flash cm10, there was no success when trying to flash cm 9 after that.
i tried it 3-4 times to flash cm 10 directly with no success. i checked md5 sums of the downloaded files, but everything was fine.
the detour with cm 9.1 was the only way to get it to work.
after trying to flash cm10 directly it always screwed something and was not able to get any further.
to start again, i had to go back to stock with odin. For that i used these instructions and files. (its in german, but very well illustrated, so all of you should be able to follow the steps).
When starting from stock, you can follow the steps above and everything should be fine.
took me some hours to figure out the correct order of the steps....
this is a slightly different problem as the one in op, so i decided to provide my solution here.
the heimdall 1.3.2-bug occured with the i9000 of a friend of mine, too. only heimdall 1.3.1 did what it was supposed to.
for all people interested: i decided to flash semaphore kernel for better customization options....running pretty well
EDIT: thx to everybody in this thread posting your experiences, all together it pointed me to the solution.. THX!
Grz
Click to expand...
Click to collapse
More or less I think we both had the same problem, because I also used this link wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide and heimdall 1.3.2 for flashing my phone. Just it always finished successfully so I didn't realize it was the root of all problems. I used also then Odin from the youtube video that I posted in a few posts earlier, installed Android 2.3.6 and then installed ROM Manager from Google play, and used the app to flash to ClockworkMod Recovery. After that I installed directly CM10 stable with success, and without CM9 detour.
Hi fellows,
I need your guidance and expert advice in resolving a situation, I have ran into recently. I was trying to install CM10.1 on my brother's galaxy Note GT-N7000 international version which was running official ICS 4.0.4.
Since, I had experience in installing different ROMs on my Galaxy S2, Nexus 7 and Xperia Arc so I was not worried about it being a big deal. So, I followed the procedure described in this page http://techgoneinsane.blogspot.com/2012/08/installing-cm10-on-galaxy-note-n7000.html?m=1 and used Odin and file from 'speedmod' to gain root access and flash CWM which was successful. Then, as planned, I tried update zip in the CWM recovery for CM10.1 nightly. But, I came across error 'Status 7' installation aborted. This was new to me, so I tried few things like 'factory reset', wipe data etc and even tried installing stock ROM ICS XXLRK which was previously installed but no avail. I tried several other ROMs like stable CM9 and other nightlies but no success. The phone is stuck on the boot Samsung logo with yellow triangle. However, I'm able to go in the recovery and download mode.
Upon doing couple of Google searches, I came to know, quite a number of people have faced this error by I couldn't understand the fix properly so can anyone of you please guide me for the solution. Thanks.
Your help will be greatly appreciated.
perceptorz said:
Hi fellows,
I need your guidance and expert advice in resolving a situation, I have ran into recently. I was trying to install CM10.1 on my brother's galaxy Note GT-N7000 international version which was running official ICS 4.0.4.
Since, I had experience in installing different ROMs on my Galaxy S2, Nexus 7 and Xperia Arc so I was not worried about it being a big deal. So, I followed the procedure described in this page http://techgoneinsane.blogspot.com/2012/08/installing-cm10-on-galaxy-note-n7000.html?m=1 and used Odin and file from 'speedmod' to gain root access and flash CWM which was successful. Then, as planned, I tried update zip in the CWM recovery for CM10.1 nightly. But, I came across error 'Status 7' installation aborted. This was new to me, so I tried few things like 'factory reset', wipe data etc and even tried installing stock ROM ICS XXLRK which was previously installed but no avail. I tried several other ROMs like stable CM9 and other nightlies but no success. The phone is stuck on the boot Samsung logo with yellow triangle. However, I'm able to go in the recovery and download mode.
Upon doing couple of Google searches, I came to know, quite a number of people have faced this error by I couldn't understand the fix properly so can anyone of you please guide me for the solution. Thanks.
Your help will be greatly appreciated.
Click to expand...
Click to collapse
If you are on Speedmod's recovery (which is safe), you can try this:
1) Download the latest CM10.1 kernel and save it to your SD card.
2) Flash it in Recovery (Install zip from sdcard > choose zip from sdcard), then reboot in the new Recovery (advanced > reboot recovery).
3) Do a full wipe (even format preload and system in "mounts")
3) Flash the latest CM10.1 build
4) Flash the 4.2.2 Gapps
5) Do a data wipe / factory reset
6) Reboot
You got a yellow triangle because you flashed an unofficial kernel through Odin. To get rid of it, use TriangleAway.
Good luck!
Solved
Kortxero said:
If you are on Speedmod's recovery (which is safe), you can try this:
1) Download the latest CM10.1 kernel and save it to your SD card.
2) Flash it in Recovery (Install zip from sdcard > choose zip from sdcard), then reboot in the new Recovery (advanced > reboot recovery).
3) Do a full wipe (even format preload and system in "mounts")
3) Flash the latest CM10.1 build
4) Flash the 4.2.2 Gapps
5) Do a data wipe / factory reset
6) Reboot
You got a yellow triangle because you flashed an unofficial kernel through Odin. To get rid of it, use TriangleAway.
Good luck!
Click to expand...
Click to collapse
Thanks a lot man. Issue has been resolved by following your procedure and phone is working all fine with CM10.1 on it. Xda rocks!!!
perceptorz said:
Thanks a lot man. Issue has been resolved by following your procedure and phone is working all fine with CM10.1 on it. Xda rocks!!!
Click to expand...
Click to collapse
You're welcome. Glad I could help . If you feel like it, hit the Thanks button on Chasmodo's first message in the repository (where you downloaded your CM10.1 kernel). He really deserves it. You may also want to do the same on Entropy's first post in the unofficial CM10.1 thread :good: That way, you'll show your support and appreciation :angel:.
hi,
i think im in a boot loop with my i9000 samsung galaxy S
here is what ive done so far (trying to install cm 11 nightly dec 29th rom)
-boot into recouvery using rom installer(cm recovery mode) play.google.com/store/apps/details?id=com.jrummy.apps.rom.installer . i could not boot into recovery any other way(not even hard via 3 button combo,like i did first time,to get my cm 10)
-wipe data and cache
-wipe devike cache
-wipe devike cache
-wipe data and cache
-attempt to install the cm11 nightly rom (rom installed failed... statue 7 ) (this one i transferred manually from pc)
-attempt to install the cm11 nightly rom (rom installed failed... statue 7 ) (this one was in a cm update foulder on my sd card (downloaded from about phone-cyanogenmod mod-update)
so since thouse two failed i decided to quit and install the cm 10 i was using before ( i did not flash any thing else like a update file,super SU, or even Gapps
-then i rebooted phone and it will not go past the CM screen
from what a got from google i should have wiped date/cache and dalvik cache before installing
by the way i try booting in the recouvery via CM's app but it was not working so i download
TPB /torrent/7872433/ROM_Manager_Premium_v5.0.2.7_ROOTED_DEVICES_ONLY_AnDrOiD
then i used the rom installer app(i mentioned before) and i booted into recovery
and i still get getting to recovery manually
i can figure you how to use odin... my phone doesn't get recognized and i have NEVER BEEN ABLE TO CONNECT MY PHONE WITH A PC
please help
ali9807274 said:
hi,
i think im in a boot loop with my i9000 samsung galaxy S
here is what ive done so far (trying to install cm 11 nightly dec 29th rom)
i can figure you how to use odin... my phone doesn't get recognized and i have NEVER BEEN ABLE TO CONNECT MY PHONE WITH A PC
Click to expand...
Click to collapse
First you have not mentioned from what base ROM (build) where you trying to install CM11?
Second ROM Manger app, is not compatible with i9000 and you need a higher version of CWM recovery to install CM11
Third the attached images are too poor to view.
Anyway, status 7 means :-
One or some of the prerequisite requirement for the needed upgrade is missing or corrupted . So you may need to identify and replace that requirement for the installation to continue. Most likely could be due to wrong bootloader, wrong CWM, Wrong IMEI, Wrong Radio etc ( From My Android Solution, link below)
So most likely its the CWM, in your case.
Second you can fix your USB Connection problem, Combo keys problem, CWM Problem by carefully following this guide and links inside
Check this out! Links to useful Guides and " Banned " Documentaries
i have a i9000m not a i9000, sorry my bad
i have a i9000m not a i9000, sorry my bad
what can i do, to be able to reflash the cm 10.2 i was using before?
ali9807274 said:
i have a i9000m not a i9000, sorry my bad
what can i do, to be able to reflash the cm 10.2 i was using before?
Click to expand...
Click to collapse
use i9000M ugkg3 gingerbread ROM and ugkg3 rooting kernel from My Android collection, link below under recovery kits and flash sameas the guide given to you earlier than follow same guide to flash ICS first than Jelly Bean after that ( you can follow exact flashing procedure).
only ROM and kernel use UGKG3, meant for i9000M
Check this out! Links to useful Guides and " Banned " Documentaries
dont getting stress!!
stay calm, just flash a rom stock.
i just happend same thing. good day
Flash stock ROM on via Odin. (Google how )
Root again.
Install the newest compatible CWM.
Then do your ROM again.
That should do it, it did mine.
Sent from my GT-I9000 using xda app-developers app