Related
Hello Criskelo's fans and friends.
I'll make a little guide for people who want to flash Criskelo's Ginger ROM (CGR).
I am not a noob neither a developer so i need some understanding.
If i make a mistake please correct me.That's for now lets start.
FOR NEW USERS:
MAKE SURE YOUR PHONE CAN REACH DOWNLOAD MODE
POWER BUTTON,VOLUME DOWN BUTTON AND HOME BUTTON (you'll see a yellow sign)
ΜΑΚΕ Α BACK UP OF YOUR CONTACTS,SMS.MMS ETC
Download JVQ from here http://forum.xda-developers.com/showthread.php?t=1011901 (Thanks Ramad)
Double click to extract and put in ODIN
PDA=PDA PHONE=PHONE CSC=CSC
Check repartition and put as pit the file attached(auto reboot and reset time default checked).
Put your phone into download mode and connect to pc
When it is connected you'll see a yellow light
In this point make sure that kies are not running in the background,if they do close them and run the procedure again.
Press start and let the phone boot.
PUT GINGERCRISKELO ROM ON THE ROOT OF SD CARDWhen done power off or pull the battery out and put your phone in download mode again.
Untick repartition untick auto reboot no need for pit file.
Put as PDA the tar attached(Thanks Ficeto)
When in odin say pass pull the battery out and press
VOLUME UP, POWER BUTTON AND HOME BUTTON,when you see the galaxy s sign release power button to get into recovery mode.
With volume buttons you go up and down to the menu and with power button you choose.
Wipe data/factory reset
install zip from sd card
choose zip from sd card
CRISKELO V76.zip
Wait for install
reboot and enjoy your new 2.3.4 JVQ rom.
FOR USERS COMING FROM OTHER GINGERBREAD CUSTOM ROM 2.3.3 AND UP:
Put the zip in the root of your sd card
Remove lagfix
Reboot in recovery mode
Make a nandroid back up
Wipe data/factory reset
Install zip from sd card
Choose zip from sd card
Choose Criskelo v76.zip
install reboot enjoy.
FOR USERS COMING FROM FROYO 2.2 OR 2.2.1
Follow the first procedure
DISCLAIMER:I'M NOT RESPOSSIBLE IF SOMETHING HAPPENS TO YOUR PHONE
READ AND READ AND READ THE GUIDE AGAIN AND AGAIN AND AGAIN.
If anyone got into trouble feel free to pm me.
CREDITS
darky(from him i learned the basics and put the first rom in my galaxy)
hardcore
chainfire
supercurio
criskelo
neldar
ficeto
codeworkx
tk glitch
zacharias maladroit
pauldiddy
crysis21
00.ante
dhiru1602
fr4gg0r
dagr8
ragin
and all other developers and themers for making our SGS fuctional and beautiful
if i forgot someone pm me and i'll put where u belong
download pit and odin from here
http://forum.xda-developers.com/showthread.php?t=832827(Thanks ragin)
The most important i forgot the link for the rom
HERE http://forum.xda-developers.com/showthread.php?t=978354
ATTENTION: This is exactly the same way to flash any other custom samsung rom.
You can't flash with this procedure roms like CM7 MIUI AND ALL OTHERS ROMS BASED ON CM7.
In first procedure in recovery (vol up + power + home), DON'T do a factory reset !
First, with repartition in Odin everything should be clean and second a factory reset seems to remove "sim toolkit" app and at next boot you'll be stuck at "Unlocking sim card" step.
Please, edit this tutorial or add "sim toolkit" app in the rom.
Wendigogo said:
In first procedure in recovery (vol up + power + home), DON'T do a factory reset !
First, with repartition in Odin everything should be clean and second a factory reset seems to remove "sim toolkit" app and at next boot you'll be stuck at "Unlocking sim card" step.
Please, edit this tutorial or add "sim toolkit" app in the rom.
Click to expand...
Click to collapse
I flashed 76 on 75 without flashing JVQ. is it wrong? everything work good.
http://forum.xda-developers.com/picture.php?albumid=4242&pictureid=14015
please help i just downloaded the JVQ softwere from the page u puted
http://www.multiupload.com/RTT74XVG7E
i extraxted it but there isnt a pit file ?
from where i can download it ?
and another thing i have a stock JVQ downloaded from www.samfrimware.com
can i put it insted of the JVq that i downloaded form here http://www.multiupload.com/RTT74XVG7E
???
This guide is wrong man!
You gonna put newbies in trouble!
Please remove this thread
what's wrong with it?
i followed it to the letter except the factory reset in recovery (for the causes Wendigogo already mentioned) and everything is working fine.
I am using a Galnet Twooey III (2.3.5) with Gingerbread bootloaders.
Do I need to go back to Froyo bootloaders?
Or the only thing to do is just to flash the CGR v79 using CWM?
Niccon said:
I am using a Galnet Twooey III (2.3.5) with Gingerbread bootloaders.
Do I need to go back to Froyo bootloaders?
Or the only thing to do is just to flash the CGR v79 using CWM?
Click to expand...
Click to collapse
Same here , someone please submit a reply ??!?
I was in a bootloop with your guide.
Treid then installation of darky rom and after that comes criskelo....worked.
help..
hey guys plz help me i am put rom zip file in external sd card but in the recovery external sd does not open..tell me how to open external sd or how to put rom zip file in to sd card(phone meomry) plz help me ..
Hi,
currently I am using v77 with darkcore 2.9 that matches jvq.
what is the procedure that I need to follow to install v79?
install v79 from cwm-> replace kernel to darkcore 3.1?
or install stock jvr->replace core to darkcore 3.1-> install v79 from cwm-> replace core?
or any other solution?
thanks a lot!
Ofer
oferfg4a said:
Hi,
currently I am using v77 with darkcore 2.9 that matches jvq.
what is the procedure that I need to follow to install v79?
install v79 from cwm-> replace kernel to darkcore 3.1?
or install stock jvr->replace core to darkcore 3.1-> install v79 from cwm-> replace core?
or any other solution?
thanks a lot!
Ofer
Click to expand...
Click to collapse
Just flash it from cwm, than flash the JVR compatible kernel of your choice
FulRom NoWipe V77 Versión Final - how to install
Hello
I have an samsung galaxy i9000 with
Gingerbread 2.3.3: JV9 - JVO - JV7
I downloaded the file
FulRom NoWipe V77 Versión Final: CriskeloRom_GINGERBREAD_v77_I9000-I9000T-I9000M.zip
Lets try it...
After installation
This is a GREAT ROM.
I am really happy with it.
Very awesome.
Everything works fine!
And my i9000 has bekomme even faster, so I can underclock for saving battery.
Keep up the good work.
Finally after all joy of this mod I have some suggestions.
I am using the version v77.
When trying to apply the battery mods or the blue theme, the phone loops while talking to the SIM card. Only way out, to restore my backup.
There might be the possibility, that I did not read enough about the battery mods, however, my knowledge of spain is zero.
Another question. I like the gel type style of buttons, as shown in gingercriskelos adress tab. I themed a lot for nokia. Would it not be nice to use this kind of tabs (buttons with gel effect) for the selected tab at any modus?
dark side of dark core
I am happy with v77. My prob. unfortunately i used a ext4 and forgot to reset!
When I saw v79 I tried it.
Install ZIP from SD Card.
I did not consider, that another kernel was included: Darkcore.
I end up with the astronaut.
All my cwm backups became unusable.
So I went for a clean gingerbread install and put v77 on top again. So I lose my product code.
Why didnt you stay with the old architecture, so that users can follow upgrades easily with cwm zip without wipe.
best regards
jodahush
not much movement in this thread anymore. People moves to v79
Just want to mention, that I can install battery and theme mod now.
My problem was the ext4 lagfix i used before.
I am interested to know, how those mods works with darckcore, since this thig is allways lagfixed. (v79)
Criskelo seems to move to Galaxy S2. I hope somebody continue his great ROM
I installed as per guide but I don't have google maps and don't know how to Install it?!!
tia
Heeeeeeeeeeeeeeeeeelp!
When flashing to JVQ, all went well and i got pass & reset on odin, but then on my phone, i got failed to format & got stuck on the samsung logo screen.. please heeeeeeeeeeeeeeeeeeeeeeeeeeelp
Sorry to ask a stupid question. i have been searching all over and have got tonnes of results, just need a further opinions.
I am thinking of putting CM7 on my galaxy S, yet need advise on how to do it.
i am currently on 2.3.4 stock.
i have the following questions:
What is the best way to root the phone?
Is there a way to unroot if i require, so i can get back to stock?
Do i or can i backup the stock firmware?
Whats best way to flash CM7
Any tuturials would be useful.
Please explain your answer, im a newbie at rooting. and don't want to brick my phone.
Thanks
Check my thread
http://forum.xda-developers.com/showthread.php?t=1142499
still confused
how do i update to cm7 rom when i have 2.3.4 install. some say i gotta downgrade stock?
i found this tutorial, i was wondering if its right?
http://www.theandroidsoul.com/cyanogenmod-7-cm7-samsung-galaxy-s/
New Guide, completely re-written]
Download and Install XXJVS Android 2.3.5 firmware.
Root XXJVS. This will also install ClockWorkMod (CWM) recovery, which is needed to flash MIUI ROM. In simple terms, you cannot have CM7 without a custom recovery like CWM.
Download CyanogenMod ROM from here. Prefer latest version over other, although that’s not a requirement. It keeps updating hell lot of time — which is good. At the time of writing, latest CM7 version was ”cm_galaxysmtd_full-135.zip” which I tried on my Galaxy S i9000 successfully.
Transfer the CM7 ROM file you just downloaded to phone’s sd card.
Go to recovery mode. For this, simply open the CWM app (you get it after step 2) and tap on ClockWorkMod to reboot phone into recovery mode. [Other way to reboot in recovery is to switch off phone and then press and hold 3 buttons together: VolumeUP+Home+Power till the Galaxy S logo shows up on screen]
In recovery, use Volume keys to scroll up and down between options and power key to select an option. Now, go to and select “install zip from sd card”.
Then, select “choose zip from sd card”. Browse through sd card and select the file CM7 ROM you downloaded in step 3 and transferred in step 4 above.
This will flash the required files on your phone and will reboot your phone into recovery again. This is a slightly different blue colored recovery now, btw — don’t panic on color change.
Select “install zip from sd card” again. Then, select “choose zip from sd card”. Now, browse through sd card and select the file CM7 ROM (again, yes!) you downloaded in step 3 and transferred in step 4 above.
This time, the CM7 ROM will be flashed actually and after it’s installed, your phone will be back on recovery. Select ‘go back’ and select ‘reboot system now’. When the phone restarts, you’ll have CyanogenMod 7 working coolly on your Galaxy S.
Enjoy the themes!
[Optional] Share this guide with others!
And it’s pretty easy now, right? Thanks to MIUI team. [Don't why it's easy now, look the mess of instructions below, which was the only way to install CM& earlier.]
Click to expand...
Click to collapse
so i update to 2.3.5? as it says in the link?
the only question is how do i unroot and put stock back on?
No no no!
Mate, you need to be on any gb rom, flash a custom kernel with cwm - speedmod or cf root. Download required cm7 rom to yr phone, go to recovery, mounts and storage, format system, cache and data. Then choose install from sd card, choose yr cm7 rom and flash.
Job done.
woolf clubs said:
No no no!
Mate, you need to be on any gb rom, flash a custom kernel with cwm - speedmod or cf root. Download required cm7 rom to yr phone, go to recovery, mounts and storage, format system, cache and data. Then choose install from sd card, choose yr cm7 rom and flash.
Job done.
Click to expand...
Click to collapse
lolzzz its easy for us to understand what u said...........
but i think his brain is hurting right now
1st i think he should educate himself how to flash then ur procedure is quite easy to follow
Hi peeps. I just need a little help if you guys can help me here. I recently just bought a Samsung Galaxy Mini S5570 with stock Froyo 2.2.1. I already updated to the latest Gingerbread 2.3.4 and I wanted to install a custom ROM using CM7.
1) I already rooted the phone.
2) Checked "Unknown Source"
3) Installed Clock Work Mod
4) Copied the latest CM7 (update-cm-7.1.0-GalaxyMini-KANG-signed-15112011) to root of SD card.
5) Booted to recovery mode and followed the following steps:
A) Wipe data and cache from the options
B) Select the option ‘install zip from sdcard’ then select ‘choose zip from sdcard’
C) Selected the zip "update-cm-7.1.0-GalaxyMini-KANG-signed-15112011"
D) Waited for installation to finish. After completion I wiped data & cache again.
Now here is my problem:
I followed all the steps over and over from yagyas way and other forums and even tried to clear only cache after installation but still my when my phone boots I am stuck on a screen with only "ANDROID" shown.
Could it be the latest CM7 that I am using that is not compatible with my unit? Or am I doing something wrong? Please help. I really want CM7 and any help here is greatly appreciated.
If you can help, and have the patience, please give me specific details on installing CM7 on my S5570. Thanks for all the help here.
By the way, my version of 2.3.4 Gingerbread is S5570DXKPD_S5570OLBKPD (Asia) and I was wondering if could this be 1 of the problems? Because in 1 of the forums I saw "FIRMWARE S5570XXKPI OR XXKPL OR XXKPK !!!!!! THIS IS FOR CWM USERS ONLY!!!!"
try to wipe dalvik cache too before falsh.
there a re new version of CM7, cm 7.1 17112011 and 7.2, you could try this version too!
This is all I can say....assuming u really are stuck there or boot looping.
Wipe data and cache before flashing and not after...though this should not be a prob.
Doing what I told works,
Flash cm7.x once again.. I'm got this problem from emanon to cm7.2, then i did reflash cm7.2 again...and now...cm7.2 on my phone and ....waiting RC.2 .... B-)
Sent from my GT-S5570 using xda premium
Flash it again, wipe data and cache, take out your SD Card then reboot.
Sent from my GT-S5570 using XDA App
GPS\NAVIGATION APPS does not work!!!
can enyone please help!
I've installed CM7.1 and every GPS app does not work.
I have the XXKPL version!
10X.
This happened to me,too! I just reflashed it. Sometimes this happens. I've read its called a 'bad flash'.
Reflash. That oughta work!
I've tried this for several times and yet not good!
any other suggestions??
ghost0815 said:
Hi peeps. I just need a little help if you guys can help me here. I recently just bought a Samsung Galaxy Mini S5570 with stock Froyo 2.2.1. I already updated to the latest Gingerbread 2.3.4 and I wanted to install a custom ROM using CM7.
1) I already rooted the phone.
2) Checked "Unknown Source"
3) Installed Clock Work Mod
4) Copied the latest CM7 (update-cm-7.1.0-GalaxyMini-KANG-signed-15112011) to root of SD card.
5) Booted to recovery mode and followed the following steps:
A) Wipe data and cache from the options
B) Select the option ‘install zip from sdcard’ then select ‘choose zip from sdcard’
C) Selected the zip "update-cm-7.1.0-GalaxyMini-KANG-signed-15112011"
D) Waited for installation to finish. After completion I wiped data & cache again.
Now here is my problem:
I followed all the steps over and over from yagyas way and other forums and even tried to clear only cache after installation but still my when my phone boots I am stuck on a screen with only "ANDROID" shown.
Could it be the latest CM7 that I am using that is not compatible with my unit? Or am I doing something wrong? Please help. I really want CM7 and any help here is greatly appreciated.
If you can help, and have the patience, please give me specific details on installing CM7 on my S5570. Thanks for all the help here.
By the way, my version of 2.3.4 Gingerbread is S5570DXKPD_S5570OLBKPD (Asia) and I was wondering if could this be 1 of the problems? Because in 1 of the forums I saw "FIRMWARE S5570XXKPI OR XXKPL OR XXKPK !!!!!! THIS IS FOR CWM USERS ONLY!!!!"
Click to expand...
Click to collapse
try flashing once again but without wiping data cache please re flash the gb firmware and recovey
Im a total novice when it comes to rooting. i did manage to root my N7000, but after a few hours my phone became quite muggy...i rebooted it and on reboot it said "upgrading".
Since then it has been unusable, i did the volume up/home/power button and tried a wipe data....phone still wont respond well. keyboard doesn't work, cant get a signal, and its generally so groggy, its pretty much unusable. i managed a factory reset with phone switched on, still no better.
any help would be massively appriciated
Adam:crying:
Relax mate! Am guessing a simple flashing of the stock firmware will solve ur issue.
Sorry, but wrong section mate! Please report this thread to the moderators and have it moved here:
http://forum.xda-developers.com/forumdisplay.php?f=1410
"To err is human, to forgive is divine"
Sent from my SGS II
Hey
Hey well ..
You need to publish some information like how you rooted your phone and which firmware you installed after rooting. ??
Please use CM .. and any of its mod its smooth and safe with less bugs in it .. first publish all these information and i may be able to tell you how exactly you can proceed.
Amm31c said:
Hey well ..
You need to publish some information like how you rooted your phone and which firmware you installed after rooting. ??
Please use CM .. and any of its mod its smooth and safe with less bugs in it .. first publish all these information and i may be able to tell you how exactly you can proceed.
Click to expand...
Click to collapse
Hi
I didnt install any firmware. i used a root apk, but have forgotten the name of it. i donwloaded busy box, and all the other relevant things, CSWM or whatever it is
adam.male said:
Hi
I didnt install any firmware. i used a root apk, but have forgotten the name of it. i donwloaded busy box, and all the other relevant things, CSWM or whatever it is
Click to expand...
Click to collapse
This is what i used:
http://forum.xda-developers.com/showthread.php?t=2050297
Ok ..
First of all if you have properly rooted your android device with (clockwordmod recovery) or any other recoveries etc you need to have a Rom to flash it through this recovery
It is recommend that you must have safe kernel before flashing any ROM. Please download any of CM10.1 ROM from the link below
http://forum.xda-developers.com/showthread.php?t=1789397
Now Get the ROM for your appropriate device from the link below. Select the device and download the ROM. Use any Stable or Nightly version.
http://www.cyanogenmod.org/
Next thing you need to download Google Apps package called GAPPS. Its latest version corresponding to CM10.1 android version 4.2.2 is on the top of the screen. (20130301) using link below
http://goo.im/gapps
Put all the files to micro SD Card. Since your operating system is not working so you may have to take out SD card and put these downloaded zip files to SD card using jacket or your laptop SD card slot.
Now Switch ON your android device to Recovery Mode by Holding Volume Up+ Power and Home Button together
Do following:-
Wipe data/Factory reset.
Wipe Cache.
Wipe Delvik Cache in Advanced Options ..
Fix permissions.
then go to your SD card and flash all these files in order
Flash the Kernel first and after flashing Reboot Your Recovery.
Now Flash
1. CM 10.1
2. GAPPS
Reboot .. n enjoy your new rooted phone
If you still face difficulty let me know ..
TCHAO
Amm31c said:
Ok ..
First of all if you have properly rooted your android device with (clockwordmod recovery) or any other recoveries etc you need to have a Rom to flash it through this recovery
It is recommend that you must have safe kernel before flashing any ROM. Please download any of CM10.1 ROM from the link below
http://forum.xda-developers.com/showthread.php?t=1789397
Now Get the ROM for your appropriate device from the link below. Select the device and download the ROM. Use any Stable or Nightly version.
http://www.cyanogenmod.org/
Next thing you need to download Google Apps package called GAPPS. Its latest version corresponding to CM10.1 android version 4.2.2 is on the top of the screen. (20130301) using link below
http://goo.im/gapps
Put all the files to micro SD Card. Since your operating system is not working so you may have to take out SD card and put these downloaded zip files to SD card using jacket or your laptop SD card slot.
Now Switch ON your android device to Recovery Mode by Holding Volume Up+ Power and Home Button together
Do following:-
Wipe data/Factory reset.
Wipe Cache.
Wipe Delvik Cache in Advanced Options ..
Fix permissions.
then go to your SD card and flash all these files in order
Flash the Kernel first and after flashing Reboot Your Recovery.
Now Flash
1. CM 10.1
2. GAPPS
Reboot .. n enjoy your new rooted phone
If you still face difficulty let me know ..
TCHAO
Click to expand...
Click to collapse
Hi there
1st of all, when downloading the kernel, the attached files come up (please see attachment) what do i do with pictured files? the rest of your instructions i can probably manage
Thanks for your help btw
Adam
adam.male said:
Hi there
1st of all, when downloading the kernel, the attached files come up (please see attachment) what do i do with pictured files? the rest of your instructions i can probably manage
Thanks for your help btw
Adam
Click to expand...
Click to collapse
P.S
Although i haven't reached the 'recovery mode' part yet, i can tell you that the only options are:
reboot system now
apply update for external storage
wipe data/factory reset
wipe cache partition
apply update from cache
the delvik cache & fix permissions are not options
Adam
Here ur options
Two options with you
http://www.clockworkmod.com/rommanager
Download clockword mod recovery from here.
Again I recommend using Chasmado Kernel and it will automatically install safe recovery files. TWRC or CMD Recovery
Amm31c said:
Two options with you
http://www.clockworkmod.com/rommanager
Download clockword mod recovery from here.
Again I recommend using Chasmado Kernel and it will automatically install safe recovery files. TWRC or CMD Recovery
Click to expand...
Click to collapse
Hi there, and thanks again. so from what im understanding i just need to download clockword mod recovery and a kernal, put it on my sd card, put into recovery mode and install from there?? like i say, in the rooting/techie world, i am an infant!
Thanks, Adam
hi,
i think im in a boot loop with my i9000 samsung galaxy S
here is what ive done so far (trying to install cm 11 nightly dec 29th rom)
-boot into recouvery using rom installer(cm recovery mode) play.google.com/store/apps/details?id=com.jrummy.apps.rom.installer . i could not boot into recovery any other way(not even hard via 3 button combo,like i did first time,to get my cm 10)
-wipe data and cache
-wipe devike cache
-wipe devike cache
-wipe data and cache
-attempt to install the cm11 nightly rom (rom installed failed... statue 7 ) (this one i transferred manually from pc)
-attempt to install the cm11 nightly rom (rom installed failed... statue 7 ) (this one was in a cm update foulder on my sd card (downloaded from about phone-cyanogenmod mod-update)
so since thouse two failed i decided to quit and install the cm 10 i was using before ( i did not flash any thing else like a update file,super SU, or even Gapps
-then i rebooted phone and it will not go past the CM screen
from what a got from google i should have wiped date/cache and dalvik cache before installing
by the way i try booting in the recouvery via CM's app but it was not working so i download
TPB /torrent/7872433/ROM_Manager_Premium_v5.0.2.7_ROOTED_DEVICES_ONLY_AnDrOiD
then i used the rom installer app(i mentioned before) and i booted into recovery
and i still get getting to recovery manually
i can figure you how to use odin... my phone doesn't get recognized and i have NEVER BEEN ABLE TO CONNECT MY PHONE WITH A PC
please help
ali9807274 said:
hi,
i think im in a boot loop with my i9000 samsung galaxy S
here is what ive done so far (trying to install cm 11 nightly dec 29th rom)
i can figure you how to use odin... my phone doesn't get recognized and i have NEVER BEEN ABLE TO CONNECT MY PHONE WITH A PC
Click to expand...
Click to collapse
First you have not mentioned from what base ROM (build) where you trying to install CM11?
Second ROM Manger app, is not compatible with i9000 and you need a higher version of CWM recovery to install CM11
Third the attached images are too poor to view.
Anyway, status 7 means :-
One or some of the prerequisite requirement for the needed upgrade is missing or corrupted . So you may need to identify and replace that requirement for the installation to continue. Most likely could be due to wrong bootloader, wrong CWM, Wrong IMEI, Wrong Radio etc ( From My Android Solution, link below)
So most likely its the CWM, in your case.
Second you can fix your USB Connection problem, Combo keys problem, CWM Problem by carefully following this guide and links inside
Check this out! Links to useful Guides and " Banned " Documentaries
i have a i9000m not a i9000, sorry my bad
i have a i9000m not a i9000, sorry my bad
what can i do, to be able to reflash the cm 10.2 i was using before?
ali9807274 said:
i have a i9000m not a i9000, sorry my bad
what can i do, to be able to reflash the cm 10.2 i was using before?
Click to expand...
Click to collapse
use i9000M ugkg3 gingerbread ROM and ugkg3 rooting kernel from My Android collection, link below under recovery kits and flash sameas the guide given to you earlier than follow same guide to flash ICS first than Jelly Bean after that ( you can follow exact flashing procedure).
only ROM and kernel use UGKG3, meant for i9000M
Check this out! Links to useful Guides and " Banned " Documentaries
dont getting stress!!
stay calm, just flash a rom stock.
i just happend same thing. good day
Flash stock ROM on via Odin. (Google how )
Root again.
Install the newest compatible CWM.
Then do your ROM again.
That should do it, it did mine.
Sent from my GT-I9000 using xda app-developers app