Database Develop

Weird display/screen problem, warranty case, or simply tough luck?

Hi, my sister's boyfriend is having a screenproblem with his TyTN2. Yesterday, he took it out of his pocket, turned it on, and the screen was more or less white, with one blueish "wave" over the screen. Everything else seems to work, he can use the phone, without seeing anything of course.
Now the weird thing: The phone wasn't dropped, there is really no sign of a hit or something. It's pretty the same as this user already described some time earlier inhere (click).
As it obviously seems, this is a TyTN2-problem, and not due to hitting/dropping the device, so, is there a hope to get this replaced on warranty? I hoped to find more threads on the subject "broken screen", especially one matching exactly this case, but until now, I only found the one cited above, beside many others of course about users who caused the broken screen themselves. Am I perhaps overseeing a thread treating this special case?
What possibilities does he have, besides buying a new device, or sending it in to HTC for repair?
I read something about a "ribbon cable" that could be "uncorrectly seated" (click), how probable is it, that this could be the case? And if probable, what cable is this exactly? I looked at one dismantling guide, but there are several "candidates" that could be loose?!
So, I'd be very grateful for every helpful advice, he's convinced he didn't harm his TyTN2, and I believe this, because he always carries it in a protecting Alu-case...
Thx in advance,
Eric

I've also once broken a screen without dropping/hitting the device, but just by it being too "compressed" in my pocket, which bent the screen enough to crack it.
Some screens that don't appear cracked can actually be broken too, but just in a location you don't see (the screen is a bit bigger than the viewing area and the exterior part is where the control chip is).
What I'd do is get a screen on ebay (can find some for about $80) and replace it. That's after disassembleing the device, checking the connections and making sure the LCD is dead.

Well im having the same problem since i got my at&t tilt for just a week. First it became white-ish after turning on out of the standby mode, after 3 times it became total white and didnt get better since then. I got a new lcd from ebay 3 days ago, tried it, same white screen. Now i ordered a new ribbon cable thats the cable that sends the lcd signals to the mainboard.
This is how it looks and where you can order it on ebay:
http://cgi.ebay.com/HTC-TYTN-II-2-P4550-Kaiser-LCD-ribbon-flex-cable_W0QQitemZ110267363535QQihZ001QQcategoryZ14418QQrdZ1QQssPageNameZWD2VQQcmdZViewItemQQ_trksidZp1638Q2em122
It also has the micro sd connection, and the speaker at the ear connection on it.
I expect this item coming this week. I will hope this will fix it.

ok please report the results here, I think I'm going to check that cable in first place too

I sure will report the results.

better of selling it
i had the same problem... i found it easier and more convenient to sell the damaged phone on ebay ($250) and buy a new one from ebay as well ($400). basically, i fixed my screen for $150. think about it

phusio said:
Well im having the same problem since i got my at&t tilt for just a week. First it became white-ish after turning on out of the standby mode, after 3 times it became total white and didnt get better since then. I got a new lcd from ebay 3 days ago, tried it, same white screen. Now i ordered a new ribbon cable thats the cable that sends the lcd signals to the mainboard.
This is how it looks and where you can order it on ebay:
http://cgi.ebay.com/HTC-TYTN-II-2-P4550-Kaiser-LCD-ribbon-flex-cable_W0QQitemZ110267363535QQihZ001QQcategoryZ14418QQrdZ1QQssPageNameZWD2VQQcmdZViewItemQQ_trksidZp1638Q2em122
It also has the micro sd connection, and the speaker at the ear connection on it.
I expect this item coming this week. I will hope this will fix it.
Click to expand...
Click to collapse
As im typing now, the htc tytn2 works again. My problem was the flex cable. Got the new one installed and lcd works again. But take a look to this thread, theres a guy that has also the problem and said just a other lcd worked.
The thread: http://forum.xda-developers.com/showthread.php?t=352486

LCD Replacement

Ok so i sat on my Tilt and busted my LCD. Me and my fat A$$!! I then went on eBay and bought a replacement for 40$, get it a few days later and start the operation. Following along precisely with a picture tutorial on how to disassemble, put in the new LCD and start the reassembly. I soon realize that the ribbon cable connector on the new LCD is just slightly outta place compared to the old one. After managing to get it on and having difficulty reassembling my Tilt,I insert the battery and the screen actually works...for about 10 seconds.... so i disassemble and reassemble a few more times trying to fix it and no luck. I then read about sub-par lcd's from eBay causing glitches and weird things to happen. I then proceed to kick my self in the a$$ numerous times. I have contacted the seller and he agreed to replace it. My question being.. has anyone had success with a replacement LCD from Ebay? if so who was the seller? And do any of the almighty here have any words of wisdom for a feeble tilt owner such as myself?

Yea I have words of wisdom, pay $hit get $hit.
That's what happens when you "buy it now" the cheapest screen on eBay

Screen
I can only add this since I have not "yet" had to replace a tilt screen. I have however replaced others including a T-Mobile Dash screen.
If you have push tabs on the socket for the ribbon cable - make sure they are pushed in and secure. I "did not" do this the first time I installed the Dash LCD and got pretty much the same results you spoke of for the Tilt. Upon dissassembly/reassembly - I discovered that the tabs were not down and secure. Sevured them and I was up and running!
Hope it helps you out.

hi there. not sure who you bought your screen off of, but here is the one i bought and successfully fitted a week ago
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110273898639
i actually think it is more sensitive than the original screen.

[Q] Screen Problem-Anyone Seen This??????

I bought the Pure in November. Since then its been in a case 100% of the time, NO drops, NO water damage. Last week it developed the "spot" shown on the picture. It looks like a thumbprint, almost. Its unlocked, hard spl'ed, and was running a custom ROM but I reflashed to stock ROM in desperation. I am just stumped and more than a little ticked off-I mean I bought it unsubsidized and it crapped out quicker than my husbands $20.00 Nokia. The touchscreen does function normally though. I contacted HTC, who told me to contact AT&T. I'm guess I'm trying to figure out if its worth trying to replace the digitizer or just sell it to gazelle.com for the 50 bucks they offered. Thanks for any help you can offer.

Hello, I've had this problem on my diamond2, I took it to my operator and they program from replacing the front panel, the problem is that the digitizer glued to the screen. Good luck and I hope I have helped!

Thank you, that does help! I'll call AT&T now.

I had the same problem just sent it into ATT to get fixed.

Screen Problem
Unfortunately, I have seen it. I'm seeing it right now- take a look at the attachments.... So this is possibly not the display itself and may be the digitizer fusing somehow with the display, huh?/ Would anyone know where to get the take- apart for this phone??? Actually, what AT&T is calling the Pure is the HTC Warhawk ST6356- I paid cash for mine so I wouldn't have to commit, so sending or calling AT&T probably won't help me....

Hardstarburst said:
Unfortunately, I have seen it. I'm seeing it right now- take a look at the attachments.... So this is possibly not the display itself and may be the digitizer fusing somehow with the display, huh?/ Would anyone know where to get the take- apart for this phone??? Actually, what AT&T is calling the Pure is the HTC Warhawk ST6356- I paid cash for mine so I wouldn't have to commit, so sending or calling AT&T probably won't help me....
Click to expand...
Click to collapse
Search for newton rings, you may be able to fix it by applying duct tape and trying to separate the layers.
Otherwise you will find digitizer replacement instructions if you search here.

its same to meee
how to fix it

I had this problem before, after my phone had a 1 feet fall to the ground. Surprisingly, it slowly went away. After a few days, it's totally gone! Lucky me!

Hardstarburst said:
Unfortunately, I have seen it. I'm seeing it right now- take a look at the attachments.... So this is possibly not the display itself and may be the digitizer fusing somehow with the display, huh?/ Would anyone know where to get the take- apart for this phone??? Actually, what AT&T is calling the Pure is the HTC Warhawk ST6356- I paid cash for mine so I wouldn't have to commit, so sending or calling AT&T probably won't help me....
Click to expand...
Click to collapse
That's LCD internal bleeding, fixed a few with that issue.
LCD is simple to replace & the digitizer is a little harder as it is bonded to the front casing.
The LCD % digitizer are totally separate & are not bonded as some people suggest.
The Diamond 2 is one of the easiest HTC devices to dismantle which is fortunate as the quality of LCD & digitizers mean you need to dismantle them frequently.

witch1 said:
I bought the Pure in November. Since then its been in a case 100% of the time, NO drops, NO water damage. Last week it developed the "spot" shown on the picture. It looks like a thumbprint, almost. Its unlocked, hard spl'ed, and was running a custom ROM but I reflashed to stock ROM in desperation. I am just stumped and more than a little ticked off-I mean I bought it unsubsidized and it crapped out quicker than my husbands $20.00 Nokia. The touchscreen does function normally though. I contacted HTC, who told me to contact AT&T. I'm guess I'm trying to figure out if its worth trying to replace the digitizer or just sell it to gazelle.com for the 50 bucks they offered. Thanks for any help you can offer.
Click to expand...
Click to collapse
this is definitely the digitiser problem. I have the same problem for almost one year, but i manneget to overcome it with the solution i have discribed here:
http://forum.xda-developers.com/showpost.php?p=5496201&postcount=78
i do not exactly what it is and why does it happening. but you can order a new digitiser from ebay for 5-10 USD and install it by your self, of course if your have applied for waranty repair already and they have refused to you.

Mister B said:
That's LCD internal bleeding, fixed a few with that issue.
LCD is simple to replace & the digitizer is a little harder as it is bonded to the front casing.
The LCD % digitizer are totally separate & are not bonded as some people suggest.
The Diamond 2 is one of the easiest HTC devices to dismantle which is fortunate as the quality of LCD & digitizers mean you need to dismantle them frequently.
Click to expand...
Click to collapse
Mister b, did you say you fixed a few of the ATT HTC Pure with this issue?? It seems fairly straightforward to replace, all except for the lower portion of the case. I can take the screws out of the top and I see how it comes apart, but it is still somehow attached at the bottom and I have pulled as hard as I dare. This phone is my "daily driver" I can't destroy it in an attempt to fix it. Any idea where I can get a take-apart manual or vid for the Pure, or do you know how the bottom portion attaches?

Hardstarburst said:
Mister b, did you say you fixed a few of the ATT HTC Pure with this issue?? It seems fairly straightforward to replace, all except for the lower portion of the case. I can take the screws out of the top and I see how it comes apart, but it is still somehow attached at the bottom and I have pulled as hard as I dare. This phone is my "daily driver" I can't destroy it in an attempt to fix it. Any idea where I can get a take-apart manual or vid for the Pure, or do you know how the bottom portion attaches?
Click to expand...
Click to collapse
I think on your model mentioned 2 lower screws are hidden under removable trim panel under buttons !
Youtube for a dismantling guide or look in wiki section.

[Q] Screen Cracked [Question(s) on how to fix it]

Hi, I recently got my HTC One (m7 / at&t) as a graduation present in June. Unfortunately I recently dropped it face down without its case onto the ground and resulted in a large crack(s) on the screen. I can still use the device, text, talk, watch videos etc.. but as you can obviously tell one does not simply enjoy the pleasure of having their phone(s) screen cracked.
So I immediately began looking for a solution and repair shops said 300$ to fix when I purchased my phone for just a little over 300$. So that is out of the question, unless its truely my last resort. So I began looking on how to fix it, youtube failed me the only thing that was helpful were the breakdown videos of the HTC One teaching me how to take apart the phone (The only part I was interested in was on taking out the glass).
The only solution I currently can think of would to repair it myself. So here are my questions.
1) The screen is cracked only, the touch screen works fine etc.. so can someone show me the listing on ebay/amazing (I prefer amazon) of the kit or things I would need to fix it.
I Saw this one:
amazon /HTC-M7-screen-digitizer-replacement/dp/B00CWKGZ5U/ref=sr_1_5?ie=UTF8&qid=1376517625&sr=8-5&keywords=HTC+One+Glass
Because it looks like exactly what I Need, BUT I'm no expert so would that fix my problem? Or is it the wrong thing since all I need is the glass and thats the "Digitizer Outter Glass" or something? I dont know my terms that well but to me it seems like what I need because its the "Outter Glass" haha.
But I'm confused about that because it says Digitizer outter glass and in the picture has the connection cord thing, Would this be replacing every part having to deal with the screen? (i.e I take a suction cup and take out the screen, and unplug the connection from the phone to the screen, would what I having in my phone (cracked screen with cord..) be the same thing as what Ill be ordering from that amazon thing but NOT cracked?)
-----------
2) How would I replace it step by step? I already seen videos of taking the phone apart and replacing iPhone screens but I havent seen any towards the HTC One in regards to replacing the screen. So would someone mind pointing me in the right direction, or giving me a text tutorial on what to do? I can pretty much figure it out by reading it since I have videos n pictures to compare it to sorta.
-----------
3) I never done a repair before but it doesnt seem that hard, just have to be gentle and know what youre doing (Thus why im asking so many questions), is this my best option? Or what should I do...
-----------
4) When I seen videos regarding the iPhone screen replacement it was showing things like Screen Seal / and him literally taking off the glass from the this other thing and replacing just the glass itself instead of the thing below it.
Would I have to also use a type of screen seal / or have to take glass off like you would do in the iPhone or is it a 100% different conecpt / idea?
----------
Remember: I basically need to know what I need to fix the cracked screen of my phone, I think this is what i need:
amazon /HTC-M7-screen-digitizer-replacement/dp/B00CWKGZ5U/ref=sr_1_5?ie=UTF8&qid=1376517625&sr=8-5&keywords=HTC+One+Glass
So if it is, then may someone tell me how to replace my phones cracked screen using that and explain it to me what im actually doing and watch each part is etc.. (like what im buying and whats cracked with my phone, so I know its what I need)
and if not, can someone tell me what I need and how to do it?
PS I understand I cant post outside links, but its amazon and Im not trying to advertise i just need the link as a comparison / example

This is one of the worst phones created when it comes to repair. It is well made, but ease of repair was not their priority. The only thing I can recommend to you would be to go to the Ifixit web site. They do a tear down of the phone to show how hard it is to repair. Maybe that will help you out.
Edit: In your original post, you wrote that you had watched videos on the Iphone. Since this is a different phone with differences in assembly, I suggested a video concerning this specific phone. Not trying to be rude, but if I was taking apart my HTC, I would view specific videos concerning my phone. I thought that the specific video might give you clues as to the parts involved in assembly and what procedures were necessary. The video I was referring to concerned their taking apart an HTC One. Every bit of information might be helpful to you trying to fix your problem.

Wolf said:
This is one of the worst phones created when it comes to repair. It is well made, but ease of repair was not their priority. The only thing I can recommend to you would be to go to the Ifixit web site. They do a tear down of the phone to show how hard it is to repair. Maybe that will help you out.
Click to expand...
Click to collapse
Not being rude but I'm pretty sure I already stated the fact that I seen the videos and tutorials regarding the tear down of the phone. So how do you expect that to "maybe" help me out? If I'm trying ti find out the part(s) I need to replace since I don't know the full termology.
I know how to take my phone apart (For the most part), I Just need to know mainly what I need to replace to fix my cracked screen, or whats my best solution. + The questions i stated in the thread.
Thank you.

Unfortunately you will have to change the whole screen assembly.
This will cost you a little ... http://www.etradesupply.com/oem-htc...itizer-assembly-with-front-housing-white.html
You could try also just the LCD+ digitizer (if the front aluminum parts are still intact: http://www.etradesupply.com/oem-htc-one-lcd-screen-and-digitizer-assembly.html
If you scratched the back of the phone, those guys have the back assembly also ... about 24 USD ... ( http://www.etradesupply.com/oem-htc-one-rear-housing.html )
You could TRY replacing only the digitizer ( http://www.etradesupply.com/oem-htc-one-digitizer-touch-screen.html ) but I would not go there. In between the digitizer (what is actually cracked in your case) and the lcd there is a special "jelly" glue which is VERY hard to remove w/o breaking the LCD. I tried that on a N7 and now I'm waiting for a new LCD to be delivered ...
Good luck!

Thank you, I appreciate the reply.
My casing / housing isnt broken (The cracks start from the top of the screen right below the camera/speakers where the glass is, and the crack(s) end towards the HTC Logo etc..) so should I still buy the white housing with lcd+digitizer or should I just go with the second option and buy the digitizer+lcd without the housing (second link you gave me)

JohnVerde said:
Thank you, I appreciate the reply.
My casing / housing isnt broken (The cracks start from the top of the screen right below the camera/speakers where the glass is, and the crack(s) end towards the HTC Logo etc..) so should I still buy the white housing with lcd+digitizer or should I just go with the second option and buy the digitizer+lcd without the housing (second link you gave me)
Click to expand...
Click to collapse
Let us know how it went. :good:

Not sure if it's worth it. HTC will fix it for you somewhere around $180.
Sent from my HTC One using xda app-developers app

JohnVerde said:
Hi, I recently got my HTC One (m7 / at&t) as a graduation present in June. Unfortunately I recently dropped it face down without its case onto the ground and resulted in a large crack(s) on the screen. I can still use the device, text, talk, watch videos etc.. but as you can obviously tell one does not simply enjoy the pleasure of having their phone(s) screen cracked.
Click to expand...
Click to collapse
Hi,
I posted a lengthy thread on how to do a repair here
http://forum.xda-developers.com/showthread.php?t=2387992
Did it well over a month ago and it is still running fine.

You might want to call you household insurance, and tell them someone in your household (not you) dropped the phone while cleaning for example.
Here in the Netherlands, they will pay the repair even the same day.
I didn't had to send them anything, just tell them on the phone how much the reparations would cost, and they transfered the complete numeber right away!
Too bad I found that out after spending more than $100,- on phone reparations.
It might be worth the shot, since they may reimburse it for you.

Replacement Touchscreen TF701T

My TF701T fell off my bed over the weekend and the screen cracked (even while in the PERFECTO case ). ASUS customer service wants to charge $200 for me to ship it to them and replace the screen. I'm trying to find somewhere online that sells the touchscreen replacement to do it myself, but can't seem to find it anywhere. Does anyone know a good source to find a replacement screen for the 701T?

kilo94 said:
My TF701T fell off my bed over the weekend and the screen cracked (even while in the PERFECTO case ). ASUS customer service wants to charge $200 for me to ship it to them and replace the screen. I'm trying to find somewhere online that sells the touchscreen replacement to do it myself, but can't seem to find it anywhere. Does anyone know a good source to find a replacement screen for the 701T?
Click to expand...
Click to collapse
You too?! I dropped mine last night. Mine is ok though. Thanks for telling us. Do not drop it! Not exactly bulletproof i guess.

Here is the only website where you're going to find what you need
http://docteur-gsm.com/en/asus-transformer-pad-tf701t/173059-asus-transformer-pad-tf701t-complete-replacement-screen.html

i want to replace my digitizer, stupid screen can register everytime i touch it
---------- Post added at 10:49 PM ---------- Previous post was at 10:49 PM ----------
master_image said:
Here is the only website where you're going to find what you need
http://docteur-gsm.com/en/asus-transformer-pad-tf701t/173059-asus-transformer-pad-tf701t-complete-replacement-screen.html
Click to expand...
Click to collapse
thats for the info, im hoping it will be on ebay or something soon

master_image said:
Here is the only website where you're going to find what you need
[[docteur-gsm website]]
Click to expand...
Click to collapse
Yikes, that's ridiculously expensive... I dropped mine last night and the screen cracked. The display is still alive, but it registers touches like crazy. Luckily I can still use it with my mouse to some degree...
Has anyone had luck with ordering parts directly from ASUS? There's no way i'd pay them that much for that job, and the going rate on ebay for replacement TFx00 screens (albeit every one BUT the 701, WTF!) is in the $20-$40 range. I've already got the tablet apart, and am working on separating the glass from the bezel with a hair dryer. Very easy disassembly.

I wanted to close the loop on this one since I initially asked the question. I ended up going with the tech support at ASUS, going through the RMA process, shipping my tablet to them, and having them replace the screen. In the end it was cheaper than the website above (they charged me $170), but it appears lke they sent me a new one in the end...because the invoice I got in the mail today said new, and it looks like it really is new (i.e., needing the firmware update again, not having a single thing that I had went it was sent, new registration number, etc).
So although it took them nearly a month, in the end I have my tablet back and it's smoother than ever.

I had one tf701t with a cracked digitizer and another where the LCD just failed (but the digitizer was fine). Since I was unlocked, I figured I wasn't going to get much help from Asus. I figured I'd swap the digitizer from one onto the other. I've done this on other tablets but I was unsuccessful on the tf701t. Getting the screen out was pretty easy. The hardware is close to a tf700, but one important difference is in terms of how the digitizer and LCD are attached to each other. On the tf700, there are screws to hold on the LCD. These don't exist on the tf701t and there are plastic tabs instead that don't lift up. It doesn't look like there was any intent to allow the digitizer and LCD to be separated again (unlike other tablets). I was unable to do so without damaging the LCD. I thought I did it, but when I turned it back on, the pressure required to slightly bend the LCD to separate it from the digitizer damaged it just a bit.
If anyone is able to make this repair successfully, I'd love to hear about it. Replacing the combined LCD and digitizer as a single combined unit, would actually be pretty easy given the assembly method (easier than previous Asus tablets). I think that is the planned repair process.

derekk1 said:
If anyone is able to make this repair successfully, I'd love to hear about it. Replacing the combined LCD and digitizer as a single combined unit, would actually be pretty easy given the assembly method (easier than previous Asus tablets). I think that is the planned repair process.
Click to expand...
Click to collapse
I successfully separated the LCD from the back of my broken digitizer without damaging it, and used the tablet for quite a while with the broken digitizer disconnected. A few weeks ago, digitizers started popping up on ebay from china, so I ordered one when they dropped from $150 down to $100. I saved all the sticky back foam for the LCD, and replaced all the sticky back tape for the bezel-glass attachment. The ribbon cable was mounted a bit closer to the edge on the new digitizer, so it wasn't clearing the bezel properly when folded over. So I had to bevel my bezel a bit, lol, and thus made room for it. So with great satisfaction of not breaking anything, I button the tablet back up and boot it...
WTF??? X Axis is inverted. I touch the left, it registers on the right. I draw a circle, it mirrors that circle. Damnit. I've heard of this being a problem with the TF201's, but this model too??? So now, I'm contacting the seller to see about an exchange or refund.

Parts Tablet the way to go?
derekk1 said:
If anyone is able to make this repair successfully, I'd love to hear about it. Replacing the combined LCD and digitizer as a single combined unit, would actually be pretty easy given the assembly method (easier than previous Asus tablets). I think that is the planned repair process.
Click to expand...
Click to collapse
Personally, I would do like I just did with my motherboard replacement on my laptop.
**Just buy a broken for parts/AS/IS 701 and just take what you need off it. Then you have a parts tablet. I saw a few go for less than 100$ a few weeks ago when I was looking for parts. I just ended up sending it to ASUS though. I'd rather have warranty work if it's still under warranty, than void my warranty prematurely.
That being said,by the end of the year, I'll probably invest in a parts tablet, just in case. I live a rough lifestyle, but I try to take the best care of my electronics. That being said, accidents happen.

Hello,
My lcd+digitizer screen have broken down and I need to replace them. Please, any help? On ebay, all I could find were screen digitizers.
Best regards!!

TF700 Screen Woes
Just some related info that may be useful to some of you:
My Asus TF700 tablet slipped from my grip whilst crossing the parking lot from my car to the local Starbucks. To be fair, I've dropped it a handful of times before with no serious damage (including the very first day I had it... the tablet wasn't securely locked into the docking keyboard and I wasn't yet familiar with how to make sure!) But this time it hit the asphalt hard, striking the pavement directly on the corner of the folded keyboard/tablet case. The screen still displays, but the gorilla glass has cracks all over the place!
I took it to a local computer repair shop and they quoted me a screen replacement price of $150 to $250, depending on which screen was required. Apparently they were finding multiple part numbers for the TF700 screen, with overlap between the TF701 and the TF201. They mentioned that some screens are held in place with screws and so can be removed from the back panel, while others require actually going in through the glass itself to separate the glass and screen from the back plate. After reading some of the info here on XDA-developers.com it sounds as though the TF701 has the "fused" screen and the TF700 has the screw-attached version. In any case, I deferred on repairing it for now. I may instead try to sell the docking keyboard with supplemental battery to recoup what I can.

x axis inverted
DarkCecil said:
I successfully separated the LCD from the back of my broken digitizer without damaging it, and used the tablet for quite a while with the broken digitizer disconnected. A few weeks ago, digitizers started popping up on ebay from china, so I ordered one when they dropped from $150 down to $100. I saved all the sticky back foam for the LCD, and replaced all the sticky back tape for the bezel-glass attachment. The ribbon cable was mounted a bit closer to the edge on the new digitizer, so it wasn't clearing the bezel properly when folded over. So I had to bevel my bezel a bit, lol, and thus made room for it. So with great satisfaction of not breaking anything, I button the tablet back up and boot it...
WTF??? X Axis is inverted. I touch the left, it registers on the right. I draw a circle, it mirrors that circle. Damnit. I've heard of this being a problem with the TF201's, but this model too??? So now, I'm contacting the seller to see about an exchange or refund.
Click to expand...
Click to collapse
-----------------------------------------------------------------------
I have the same story, and found some hope on http://forum.xda-developers.com/showpost.php?p=55290214&postcount=146
maybe when more people have the same problem (same problem with the tf201 is solved), the solution is on the way?

I too have the same story again! :crying: