Database Develop

Case with magnet cover

Hey guys
Does anybody know if there is a cover out there which has a magnet inside?
So the screen turns off when you close it, and it turns back on when you open the cover?
I just found the official g2 cover, but i dont like the QuickWindow
I also used the app Gravity Screen, but it happens way to often that i turn the screen on by accident :/

[Q] screen seems always on with flip cover closed

Hi everyone, tonight i left my n6 unplugged, this morning i've checked the battery status and i noticed that my screen on graph tells me that screen keeps turn on and off, but it seems to behave this way only when the flipcover is closed and the screen doesnt actually turn on...can someone tell me why?

RickStrom said:
Hi everyone, tonight i left my n6 unplugged, this morning i've checked the battery status and i noticed that my screen on graph tells me that screen keeps turn on and off, but it seems to behave this way only when the flipcover is closed and the screen doesnt actually turn on...can someone tell me why?
Click to expand...
Click to collapse
Most probably it's the fault of the flip cover which is allowing the proximity sensor to be turned on sometimes. Just check if there is any major gap between the screen and flip give while it's closed

does your flip cover have auto-on? I.e., does it use a magnet to automatically turn on the screen when you open it? that causes my display to periodically turn on and off while the cover is closed. I ended up getting a flip case without auto-on.

[Q] Disable Magnetic Sensor?

Is there any way to disable the magnetic sensor on the N6? I have a smart cover that keeps constantly turning the screen on in my pocket and it's killing my battery. It is a very nice luxury case and I don't want to damage it or replace with another cover. I tried finding an app that would do it but no luck. Any help would be greatly appreciated!

bobprobert said:
Is there any way to disable the magnetic sensor on the N6? I have a smart cover that keeps constantly turning the screen on in my pocket and it's killing my battery. It is a very nice luxury case and I don't want to damage it or replace with another cover. I tried finding an app that would do it but no luck. Any help would be greatly appreciated!
Click to expand...
Click to collapse
Dont think there is a way to disable it yet.
Although i read elsewhere its located in /sys/module/ and adding a '0' or 'false' to the value will disable. Issue is still not located the magnetic sensor, older devices it was in /sys/module/lid/parameters/lid_enabled.
But no luck on N6 yet

has anyone had any luck using an app to accomplish this?

bobprobert said:
has anyone had any luck using an app to accomplish this?
Click to expand...
Click to collapse
Found nothing to disable the magnet sensor.
Installed Xposed and a MagnetOff app. But it did not disable the magnet sensor.
Because I cannot disable that feature, I decided to use it.
On the outside of my belt case I attached a small magnet (glue) and now my screen is always off when the N6 is in the case.
When I take the N6 out of the case the screen turns on. No need for pressing a button.

NLBeev said:
Found nothing to disable the magnet sensor.
Installed Xposed and a MagnetOff app. But it did not disable the magnet sensor.
Because I cannot disable that feature, I decided to use it.
On the outside of my belt case I attached a small magnet (glue) and now my screen is always off when the N6 is in the case.
When I take the N6 out of the case the screen turns on. No need for pressing a button.
Click to expand...
Click to collapse
you sure the screen is always off when it's in your case? like the OP, I found that my screen would periodically come on when using a flip case that has the auto on feature (while closed).

PhilDX said:
you sure the screen is always off when it's in your case? like the OP, I found that my screen would periodically come on when using a flip case that has the auto on feature (while closed).
Click to expand...
Click to collapse
When de magnet is close to the circle with the Motorola logo the screen is switched off.
I am using a flat neodymium magnet with a diamater of 10 mm.
Because the case is partly open at the top, I can see that the screen is really off when the N6 is in the belt case.
http://www.ebay.com/itm/Cool-CowBoy...t=LH_DefaultDomain_0&var=&hash=item4d2493c910
When you are unsure if the screens will be turned off when the N6 is in the case, use a stronger magnet.
I mounted with glue a magnet at the outside and put a second one on the inside.
So I am using two small magnets.

any developer willing to dig into this issue to try to find a solution?

[Q] Magnet keeps activating screen, drains battery

I found out that whenever a magnet is close to the screen (like the ones to be found in auto wake/sleep smart covers ) the screen will go off, as it should, but wakes up again after 10 seconds.
It will keep doing that forever: wake up, sleep due to inactivity, wake up, sleep, etc etc. It is obvious that the magnet is somehow triggering the screen to wake up.
You can easily reproduce this by placing a white board magnet on the device (place it between the hours and minutes of the lockscreen clock). Just wait and see what happens.
This means that you are certain to drain your battery when your phone is idle, sitting in a smart cover like the official one from Casemate.
I would love to use the smart wake, it worked flawlessly on the Nexus 5 but works only as a battery drainer on the N6
Is there anything that can be done about it? or is it a hardware issue?

plaktoets said:
I found out that whenever a magnet is close to the screen (like the ones to be found in auto wake/sleep smart covers ) the screen will go off, as it should, but wakes up again after 10 seconds.
It will keep doing that forever:
Is there anything that can be done about it? or is it a hardware issue?
Click to expand...
Click to collapse
The magnet sensor of the N6 is under the M logo at the back.
When there is a magnet on the M or there above on the display the screen is switched off. And stays off, but . . . a weak magnet that moves a bit away may cause the problem you described.
The magnet sensor cannot be disabled (could not find an app). The solution is to remove the magnet from the cover.
BTW this may occur also with a (belt) case that has a magnet closure. That closure must be about 1 cm from the M logo.

NLBeev said:
The magnet sensor of the N6 is under the M logo at the back.
When there is a magnet on the M or there above on the display the screen is switched off. And stays off, but . . . a weak magnet that moves a bit away may cause the problem you described.
The magnet sensor cannot be disabled (could not find an app). The solution is to remove the magnet from the cover.
BTW this may occur also with a (belt) case that has a magnet closure. That closure must be about 1 cm from the M logo.
Click to expand...
Click to collapse
Thats interesting, i didnt know the sensor as at the back. When i place the magnet there, the behavior is different. It does not go on entirely, instead it goes to ambient display. But not consistently... Weird.
Anyway i purchased some cheap neodyium magnets from eBay that are supposed to be quite strong, maybe that will have the desired effect. I plan to attach them to my spigen cover.

plaktoets said:
. . ,
Anyway i purchased some cheap neodyium magnets from eBay that are supposed to be quite strong, maybe that will have the desired effect. I plan to attach them to my spigen cover.
Click to expand...
Click to collapse
If you want to be sure that the magnet sensor is active (screen off) you need probably more magnets.

NLBeev said:
If you want to be sure that the magnet sensor is active (screen off) you need probably more magnets.
Click to expand...
Click to collapse
That's OK, they come in ten

I've observed this too. I wrote a Tasker app to sound a notification everytime the screen turned on (since my casemate flip case was closed) just to prove I wasn't crazy. mine turns on with every magnet (auto sleep) case I've tried. this is with stock software.
after posting about this issue in one of the case threads in the nexus 6 accessories forum, it turned out not everyone experienced this issue. or at least they didn't know they did.
I just wanna know how Google can even sell the casemate case in the play store when this issue exists (at least for some)...

Xposed has a module that turns off the magnetic sensor. I have no idea if it works or not so look at the thread for it. My phone is naked so I don't have this problem.
---------- Post added at 05:44 PM ---------- Previous post was at 05:43 PM ----------
http://forum.xda-developers.com/showthread.php?t=2621807

No software yet to disable the magnet sensor
orangechoochoo said:
Xposed has a module that turns off the magnetic sensor. I have no idea if it works or not so look at the thread for it. My phone is naked so I don't have this problem.
http://forum.xda-developers.com/showthread.php?t=2621807
Click to expand...
Click to collapse
On the hard cover I mounted a small round metal plate (glue) at the same height as the M-logo at the back.
I did choose that place, because it is above the coil for wireless charging.
But. . . . the problem is that exactly there the magnet sensor is located.
So when the N6 was mounted at the neodymium magnet, the screen becomes black.
The first thing I tried is to disable the magnetic sensor with the xposed-module. Unfortunately is does not work on the N6 with Lollipop.
Xposed need to be updated.
My hardware solution is to glue the metal plate on the cover, about 1 cm below the M-logo. And then wireless charging is not possible (metal becomes hot).
I am using at the moment two ultra thin covers for the N6. One with metal for car use and another original to allow wireless charging.

Same problem with the official case mate cover, it is useless. I pulled mine from a shelf this week wondering why I wasn't using it, two days later "ahh, now I remember...". One of the many reasons I don't like this phone. Generally, Motorola does a nice job but when they don't, the phones are real duds. At least this problem is better than those with the screen protectors keeping the screen off when you make a call.
Someone mentioned a fix using gravity box for the ambient display activating in a pocket and causing phone calls and texts inadvertently; I think it was setting to keep the screen off if the proximity sensor was active, like in a pocket. It would probably work for this problem too.

mgerbasio said:
. . . a fix using gravity box for the ambient display activating in a pocket and causing phone calls and texts inadvertently.
Click to expand...
Click to collapse
When a magnet stays close enough to the M-logo there is no problem. But most leather cases are flexible. Little movings will continuously activate and deactivate the magnet sensor. So the screen is frequently tuned on.
We need a software solution that turns the magnet sensor completely off.
In the meantime you need to remove the magnet from the case/cover and replace it with Velcro.
In some types of cases the magnet is not in the center. Put the N6 in the case with the M-logo turned away from the magnet.
When the magnet is about 1 cm away from the M-logo, the magnet sensor is not activated.

NLBeev said:
When a magnet stays close enough to the M-logo there is no problem. But most leather cases are flexible. Little movings will continuously activate and deactivate the magnet sensor. So the screen is frequently tuned on.
Click to expand...
Click to collapse
The update really didn't make a difference for this but I did notice that for the official cover, either I received a defective one or the magnet is extremely weak. Velcro won't help as it doesn't have a flap to keep it closed. I guess the prosimity sensor only works with a phone call.

Official S-View case with Always-On Display - any issues ?

Hello,
I would like to try an official S-View case (the one with a small window up top, NOT the clear-view case), but I don't understand how it works with the Always-On Display. The Always-On display moves up and down the screen to prevent burn-in, but sometimes it seems to be displayed lower than the S-View window, which would defeat the purpose if the S-View case does not modify its behavior.
Does anyone have this case and used it with the Always-On Display ? Are there any moments when the display text is displayed outside of the S-View window and thus not visible ?
Thanks !

Not using one but plan to get it. I'd imagine always on display will be unavailable with the s-view cover or the clear view cover for that matter.

Always On Display is not available when you use Clear View Cover.

I have the S-View Cover and the Always On Display function does not work with it. I'm thinking about getting the LED flip cover.

Thanks everyone. It seems that many people on other forums are also upset that the always-on display does not work with the case, and not even with the Clear View case ! Another proof (combined with the quite high battery drain and lack of full notification display) that the Always-On Display was an afterthought from Samsung, they didn't plan it from the beginning. Hopefully a software update addresses these issues, until then I can't see the reason to get one of these cases.

I love this case..the led view is hard plastic and this one, all though fake, feels like leather.
No always on, but I don't care. The ability to take pics cover open, closed or folded over is fantastic. Also see all the notifications without opening. Had one on my note 4 and I'll get one on note6 or s8.