Related
I tried to flash many roms on my cell without any succes, so i wonder if anyone can tell me wich rom should i install via original recovery sideload, I got an xt1063 type MOFB9 ON TITAN_UMTS:4.4.4/kxb21.85-23/21
Please i know i can flash and downgrade many roms via fasboot,or custome recovery twrp or pholz, but i want to know, if in original, i got the latest , or what would be the next rom to flash acording to the system i have. thanks for the help.
abispac said:
I tried to flash many roms on my cell without any succes, so i wonder if anyone can tell me wich rom should i install via original recovery sideload, I got an xt1063 type MOFB9 ON TITAN_UMTS:4.4.4/kxb21.85-23/21
Please i know i can flash and downgrade many roms via fasboot,or custome recovery twrp or pholz, but i want to know, if in original, i got the latest , or what would be the next rom to flash acording to the system i have. thanks for the help.
Click to expand...
Click to collapse
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25&page=1ALL MOTO G firmware available (1st, 2nd and 3rd Gen) pick correct XT1063 in your case
reefuge said:
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25&page=1ALL MOTO G firmware available (1st, 2nd and 3rd Gen) pick correct XT1063 in your case
Click to expand...
Click to collapse
Thank you sir, but i see this roms end in xml, wich i think are for flashing via fasboot? if im wrong please correct me, im looking for the ota original to flash via original recovery.
abispac said:
Thank you sir, but i see this roms end in xml, wich i think are for flashing via fasboot? if im wrong please correct me, im looking for the ota original to flash via original recovery.
Click to expand...
Click to collapse
thats correct these are via ADB mfastboot (which ignores OTA fingerprint check) as flashes full firmware, not the ota.zip which is only a smaller (not full firmware) update
ota.zip is NOT full firmware, so will not fix a corrupted / altered or non stock firmware
but you say you've flashed many roms.... you need to be on correct rom and matching recovery and also un-rooted to flash a OTA.zip as it checks Recovery version and the build fingerprint inside /system folder of original stock rom. if any of these mismatch it will fail.
also (apologies if wrong) but dont you believe your phone to be corrupted or read only hence why you cant flash images?
reefuge said:
thats correct these are via ADB mfastboot (which ignores OTA fingerprint check) as flashes full firmware, not the ota.zip which is only a smaller (not full firmware) update
ota.zip is NOT full firmware, so will not fix a corrupted / altered or non stock firmware
but you say you've flashed many roms.... you need to be on correct rom and matching recovery and also un-rooted to flash a OTA.zip as it checks Recovery version and the build fingerprint inside /system folder of original stock rom. if any of these mismatch it will fail.
also (apologies if wrong) but dont you believe your phone to be corrupted or read only hence why you cant flash images?
Click to expand...
Click to collapse
Chanses are my phone its corrupted, i had the hope that a mayor ota, such a 5.0 (not5.0.2) would rewrite the phone and fix it, as the olny option i have not be able to tried was install an original ota or rom via recover sideload. I got recovery KXB21.85-23. Are there any fixes for read only out there? because i have found non....
Thanks for the help thought.
abispac said:
Chanses are my phone its corrupted, i had the hope that a mayor ota, such a 5.0 (not5.0.2) would rewrite the phone and fix it, as the olny option i have not be able to tried was install an original ota or rom via recover sideload. I got recovery KXB21.85-23. Are there any fixes for read only out there? because i have found non....
Thanks for the help thought.
Click to expand...
Click to collapse
what error do you get via ADB when you flash?
can you remember what was the original firmware on phone as several for xt1063
or if boots the system version in about phone
reefuge said:
what error do you get via ADB when you flash?
can you remember what was the original firmware on phone as several for xt1063
or if boots the system version in about phone
Click to expand...
Click to collapse
Phone wont boot, its gets to the point where a blue m apears the goes to a blank screen, when flahing a rom via fasboot, all seems to get right but after restart is like nothing happened, i go back to the same state, same thing happens with twrp or philz, if you want to help, we can continue here but your more then wellcome to read this (nevermind i see you allready did)
So let me make a backup of twrp and see if i can post results, thanks allot, iveen waiting to fix this for so many days now.
A bit of background, i consider myself an advance user, someone that can google problems and fix stuff with it, ivee flashed alot of cellphones in the past ,many xt1064 and other models, just like everybody ealse, easy and no problems, but this one i just cant figure out. Seems like its on read only mode or freezed as a deepfreezed computer, dont mater how many roms i flash and the way i do, everything comes back to the same state, even if i reforma partitions, eeven if i delete pictures or folders, they come back once i reboot.
Its going to take 5hrs to upload my backup
abispac said:
Phone wont boot, its gets to the point where a blue m apears the goes to a blank screen, when flahing a rom via fasboot, all seems to get right but after restart is like nothing happened, i go back to the same state, same thing happens with twrp or philz, if you want to help, we can continue here but your more then wellcome to read this (nevermind i see you allready did)
So let me make a backup of twrp and see if i can post results, thanks allot, iveen waiting to fix this for so many days now.
A bit of background, i consider myself an advance user, someone that can google problems and fix stuff with it, ivee flashed alot of cellphones in the past ,many xt1064 and other models, just like everybody ealse, easy and no problems, but this one i just cant figure out. Seems like its on read only mode or freezed as a deepfreezed computer, dont mater how many roms i flash and the way i do, everything comes back to the same state, even if i reforma partitions, eeven if i delete pictures or folders, they come back once i reboot.
Click to expand...
Click to collapse
ok ii'm thinking corrupted partitions too.... but if you are willing to try i've made a xt1063 easy installer script for you to try now normally i work on xt1068 and would test on my xt1068 - so have NO xt1063 its UNTESTED - use at own risk.....
just stock firmware / drivers / adb and mfastboot ( same as my xt1068 script) I see no reason it should not be compatible.
download to pc / unzip to folder / read instruction inside
https://mega.co.nz/#!Tok2DJ6T!ggMoQDfAzuA7cmQQjbGCbXolWZTnx_567vG02CiURVsxt1063 4.4.4 easy installer
I repeat it YOUR choice - if it works- great - if runs ok but rom remains same would suggest somethings corrupt - if it doesnt work at all back to square 1....
now im presuming your boot loader is unlocked, as will fail if locked or relocked - if you use and get error please report what they are, i would have done 5.0.2 but its only 50% downloaded with a 1 hr+ to still go, estimate 2 hrs from time of this post until I can post a link
im uploading the backup, in the mean time i dont know if this is of any use ,its the recovery log zipped...
abispac said:
im uploading the backup, in the mean time i dont know if this is of any use ,its the recovery log zipped...
Click to expand...
Click to collapse
just to let you know TWRP is now 2.5.8.0 fixes some bugs cause older versions know to break permissions in Lollipop!!
https://mega.co.nz/#!Dx03wTbD!3sDFubGomhegQqdoGzNb1RWnQwApzyaTlVq69uX1TqkFlash-able version (unzip to pc and flash from there) 2.5.8.0
https://mega.co.nz/#!n5cUQCAY!uf66vEcQlmtu6VZMLPxksEFMEioZUFpystzTP6kwU4I Temporary boot version (no flash) 2.5.8.0.
will look but cant promise
I tried your easy install tool, brand new drivers, diferent usb port, all went smooth but after restart, im at the same situation. Funny thing, and ivee done this multiple times, after reflashing a new rom, most of them never give errors, then after nothing happens , i flash twrp and boot it, and all the files (the original ones , not the just flashed ones) are there intact, even pictures and music.
abispac said:
I tried your easy install tool, brand new drivers, diferent usb port, all went smooth but after restart, im at the same situation. Funny thing, and ivee done this multiple times, after reflashing a new rom, most of them never give errors, then after nothing happens , i flash twrp and boot it, and all the files (the original ones , not the just flashed ones) are there intact, even pictures and music.
Click to expand...
Click to collapse
ok have you tried mfastboot erase userdata and mfastboot erase cache? from a command window?
i.m interested in the I flash twrp and boot..... does this mean you are able to replace recovery with a custom recovery ON phone
rather than temporary booting into it?
reefuge said:
ok have you tried mfastboot erase userdata and mfastboot erase cache? from a command window?
i.m interested in the I flash twrp and boot..... does this mean you are able to replace recovery with a custom recovery ON phone
rather than temporary booting into it?
Click to expand...
Click to collapse
Yeah i tried those erase commands many many times and same result, i cant replace recovery at all, only boot of it, so when i do " mfastbooot flash recovery twrprecovery.img " then try to boot of recovery, i boot into factory recovery not, twrp, but if i do, "mfasboot boot twrprecovery.img" i can see the recovery img gets flashed and the phone boots of twrp. Weird behavior. So when i notice that i tried to flash a rom with mfastboot, and at the end i gave the command mfasboot boot recovery.img (the original rom recovery) then it gets flashed, and phone reboots, but i gets stuck at the motorola logo. This phone its playing hard to get....
heres, my backup https://mega.co.nz/#!md0AwbLR!uWe9PLklIugOziPLV6O_plbU-Zz9EXbqRvUVpYxECk0 hope you can find something.
Im going to take this phone to a shop to see if they can fix it as i have lost all hope, thanks refuuge for your help.
Hello everybody,
I'm new, I hope someone can help me here ... I'm quite sure somewhere on these forums there must already be answers for my problem but I'm too dumb to find them.
I have the European? 2014 Moto X (not sure how to get the exact model now?!)
Unlocked bootloader, rooted.
Everything was fine, except today I got the 5.0.2 (?) OTA update ...
I didn't want to do it, but it kept asking. The moment I pressed "don't ask again" the phone rebooted
and now it's stuck at the white bootup screen (Motorola logo)
I somehow managed to get into the fastboot? mode once, by somehow pressing buttons at startup ... but, well
My two questions are:
1. Can I still backup my data, photos, textfiles, etc etc
2. How do I go back to a working system. (maybe without loosing my data)
Please tell me if it's possible, and how ... or please push me into the right directions.
But as I'm half panicking detailed instructions would be so fantastic.
Personally, how I would recover data, is boot to fastboot and flash TWRP again (since you indicated you were unlocked boot loader). In TWRP, plug in the device to a computer via USB and your files will be there. Then you can reflash the stock firmware and be good to go. If you are comfortable flashing the firmware through fastboot, you can choose to not wipe data and you should be all set.
It may be worth trying just clearing the cache and seeing if you can boot.
Sent from my Moto X 2015 Pure Edition using Tapatalk
xKroniK13x said:
Personally, how I would recover data, is boot to fastboot and flash TWRP again (since you indicated you were unlocked boot loader). In TWRP, plug in the device to a computer via USB and your files will be there. Then you can reflash the stock firmware and be good to go. If you are comfortable flashing the firmware through fastboot, you can choose to not wipe data and you should be all set.
It may be worth trying just clearing the cache and seeing if you can boot.
Click to expand...
Click to collapse
Hey! Thanks a lot!
I did fastboot boot twrp, and managed to backup my data on the internat storage! Yeah! Thanks!! <3
Now to part 2, I tried to wipe the cache partition in TWRP, but it doesn't help; when I reboot it still only shows the white logo..
Should I wipe other partitions aswell? (davikcache?)
If there's a way without loosing the phone setup, it would be great.
(Installed apps ... open tabs in firefox etc ...)
I also have a "online nandroid" backup, I think from back then, right after I rooted.
Would I restore the system.img from there?
Will this remove installed apps?
Or should I restore all partitions made by online nandroid backup?!
(I thought this would be better than... or how would I find the right stock firmware online for my device?)
Sorry for being such a beginner!!!!
psssss said:
Hey! Thanks a lot!
I did fastboot boot twrp, and managed to backup my data on the internat storage! Yeah! Thanks!! <3
Now to part 2, I tried to wipe the cache partition in TWRP, but it doesn't help; when I reboot it still only shows the white logo..
Should I wipe other partitions aswell? (davikcache?)
If there's a way without loosing the phone setup, it would be great.
(Installed apps ... open tabs in firefox etc ...)
I also have a "online nandroid" backup, I think from back then, right after I rooted.
Would I restore the system.img from there?
Will this remove installed apps?
Or should I restore all partitions made by online nandroid backup?!
(I thought this would be better than... or how would I find the right stock firmware online for my device?)
Sorry for being such a beginner!!!!
Click to expand...
Click to collapse
Lollipop actually doesn't use dalvik, so that won't help. If you have a nandroid, you of course can restore to that but it would likely lose your apps/settings. You can try restoring just the system, it sort of depends on what went wrong. In my experience being stuck not booting, I generally just reflash everything. Not the most convenient but it is the most effective.
Sent from my Moto X 2015 Pure Edition using Tapatalk
xKroniK13x said:
Lollipop actually doesn't use dalvik, so that won't help. If you have a nandroid, you of course can restore to that but it would likely lose your apps/settings. You can try restoring just the system, it sort of depends on what went wrong. In my experience being stuck not booting, I generally just reflash everything. Not the most convenient but it is the most effective.
Click to expand...
Click to collapse
Hey xKroniK13x,
thanks a lot for caring!
Of course, catastrophy happened:
I did fastboot boot twrp and tried to restore system from there, didn't work so I restored system _and boot from my nandroid backup there
guess this was very stupid because
Now my phone boots right into the fastboot mode, and I can't fastboot boot TWRP anymore,
it says "incomplete boot image for booting"
partition sizes wrong, etc etc ...
what I did now was flashing TWRP, at least this worked and I can boot it from the phone now.
So, please, one more time help (for a very stupid user ):
1. I guess keeping my apps and settings is out of discussion now, haha
But is there a way, with unlocked bootloader, TWRP installed to go back to stock?
2. Now ... given my phone is not completely broken, I just thought about installing CM?!
Would this be recommended? is it working fine?
I'm just thinking about it, because with Cyanogenmod I won't have problems like this in the future, right?
(OTA updates destroying my phone because of root....)
Whoa, I'm sorry for posting this here, but ... :angel:
psssss said:
Hey xKroniK13x,
thanks a lot for caring!
Of course, catastrophy happened:
I did fastboot boot twrp and tried to restore system from there, didn't work so I restored system _and boot from my nandroid backup there
guess this was very stupid because
Now my phone boots right into the fastboot mode, and I can't fastboot boot TWRP anymore,
it says "incomplete boot image for booting"
partition sizes wrong, etc etc ...
what I did now was flashing TWRP, at least this worked and I can boot it from the phone now.
So, please, one more time help (for a very stupid user ):
1. I guess keeping my apps and settings is out of discussion now, haha
But is there a way, with unlocked bootloader, TWRP installed to go back to stock?
2. Now ... given my phone is not completely broken, I just thought about installing CM?!
Would this be recommended? is it working fine?
I'm just thinking about it, because with Cyanogenmod I won't have problems like this in the future, right?
(OTA updates destroying my phone because of root....)
Whoa, I'm sorry for posting this here, but ... :angel:
Click to expand...
Click to collapse
If you've been contemplating installing a ROM, now would be a good time to do so. Just remember to wipe the data on the phone even though it doesn't boot. And CM OTA shouldn't cause issues like this, it just flashes the zip file in your recovery. Doesn't care about root or anything of course. Otherwise, if you'd like to do stock, just use MDM to get the firmware and flash away. Hope this helped!
Sent from my Moto X 2015 Pure Edition using Tapatalk
Hi !
I have exactly the same problem.
Can you tell us how you did to fix the bootloop ?
Thank you
benjo22 said:
Hi !
I have exactly the same problem.
Can you tell us how you did to fix the bootloop ?
Thank you
Click to expand...
Click to collapse
Try clearing your cache in a recovery/fastboot, or reflash the firmware! No guarantee the cache will fix it, but sometimes it will.
Sent from my Moto X 2015 Pure Edition using Tapatalk
Thank you for your help.
Clearing the cache doesn't work, so I'm searching for others ways...
Can you tell me how to flash the firmware with adb ?
Thanks
Edit : I have an European version
benjo22 said:
Thank you for your help.
Clearing the cache doesn't work, so I'm searching for others ways...
Can you tell me how to flash the firmware with adb ?
Thanks
Edit : I have an European version
Click to expand...
Click to collapse
That is answered in the FAQ thread... It is a guide for Moto G but it is applicable for this device too. http://forum.xda-developers.com/showthread.php?t=2876769
Sent from my Moto X 2015 Pure Edition using Tapatalk
@xKroniK13x
Hey, thanks for somehow guiding me through this :victory:
MDM didn't work, so I just went for the CM 12.1 nightly.
I also had concerns because in my attempts to clear cache etc etc I had "wrong partition size" etc etc
But CM installed without problems!
(Just one more question- there can't be any problems in the future because of messed up partitions, right? Does CM fix this by installing? Or should I stop caring, if it works, it works, right?!)
In fact, CM runs great, fantastic on my phone.
I lost some app data, and most annoyingly my SMS, but ...
Other than that, I'm really happy with CM :laugh:
@benjo22
Hey, I tried to fix it by clearing cache partitions from a fastboot TWRP (I don't know how you call it, I just booted TWRP without installing it)
This didn't work, so I tried to restore a nandroid backup,
but this made it even worse. (partition errors, only fastboot mode, etc etc)
Just booting with TWRP without installing also didn't work anymore,
so I put TWRP on the phone, which luckily worked, downloaded CM 12.1, installed it via TWRP,
never did it before, but I was lucky, it seems like it worked great!
Even kept my "SD CARD" data, but lost apps and some data ...
So I didn't fix the bootloop, but I hope I made it better, futureproof...
Glad you got up and running. CM shouldn't cause any future issues as far as partitions and such.
Sent from my Moto X 2015 Pure Edition using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Forgive me for my english)
Hello everyone....I'm not here asking somebody to help me, I don't think you could. I'm here to advice you not to root a Huawei P8 lite 2017. The story of me bricking this phone is long, I've done lots of passages that I can't remember.
I've read guides, asked help and compared softwares before trying to root my phone, but it has been useless.
I'll explain the main problems occured.
I've unlocked bootloader and then I flashed with fastboot tim win recovery..the version is located in this section about huawei p8 lite 2017. TWRP couldn't backup Data partition, it gave me an error that I couldn't avoid: I think that version is not full compatible with this phone. STOP rooting your phone if you can't backup a partition or if the recovery starts giving you error.
I flashed MagiskSu rootless with twrp. Initially worked properly, (but not all softwares were working with it)...after trying to install viper4android, my OS corrupted...Launcher didn't started anymore when I turned up my phone...I could only see the background and go in settings app....I restored my phone with twrp but it had been useless...I had to format data partition. After that, my phone restored properly.
I was having problem with booting into system...it took every time 66 seconds, and I had only few modules installed. Something were wrong. I installed Apps2sd, but it gave me some problems...sometimes was not able to mount partition or to write the script. Then I did the wrost choice of my life. I allowed this app to edit System partition. All the phone corrupted. I was not able to boot into system after reboot. DON'T ALLOW SOFTWARES TO EDIT SYSTEM PARTITION. Then i restored the phone with twrp, but after this, my phone was damaged: No Audio, No microphone, NO camera working, I couldn't play any video or song....it was corrupted. I've tryed to restore system partition, vendor partition, boot image....everything was useless. I flashed the stock recovery and did factory reset...nothing. I flashed stock boot.img...nothing was working.
I've tryed last chace, to flash all stock rom with adb sideload: adb failed. I tryed with fastboot: failed. I at least tryed to flash manually system, vendor, boot and recovery partition with fastboot....but It ended with my phone totally bricked (I think Fastboot didn't worked properly, it gave me some errors). I had wiped all the partition before doing this...but something tell me that fastboot didn't flashed correctly stock partition.
The only thing that is left in my phone is eRecovery, I can't use usb debug, Third parts can not communicate with the phone. I can only reboot, shutdown, and try to download the "lastest version" from server...but it fails at every try. My phone is not accessible anymore.
My advice is NOT TO ROOT HUAWEI P8 LITE 2017. Wait for developers to create advanced software more compatible with this new device.
Now I want to ask help: is there something I can do right now? Why doesn't erecovery work? Is there something I can do with Huawei Support? I have to sent my phone to restore it?
Hey bro...if your phone's bootloader is unlocked as you said...
You can do those easy steps
Download HUAWEI UPDATE EXTRACTOR 9.9.3
Use it to extract the following partitions
System.img
Recovery.img
Boot.img
And other files that you need and copy them into adb.exe folder
Then boot your phone into bootloader
And then use those commands to flash the partitions
fastboot flash system system.img
And
Fastboot flash boot boot.img
And
fastboot flash recovery recovery.img
The flashing process will take a while on system partition
And then do a factory reset using stock recovery
And then the phone should boot up
Sent from my PRA-LA1 using Tapatalk
0000729399 said:
(Forgive me for my english)
Hello everyone....I'm not here asking somebody to help me, I don't think you could. I'm here to advice you not to root a Huawei P8 lite 2017. The story of me bricking this phone is long, I've done lots of passages that I can't remember.
I've read guides, asked help and compared softwares before trying to root my phone, but it has been useless.
I'll explain the main problems occured.
I've unlocked bootloader and then I flashed with fastboot tim win recovery..the version is located in this section about huawei p8 lite 2017. TWRP couldn't backup Data partition, it gave me an error that I couldn't avoid: I think that version is not full compatible with this phone. STOP rooting your phone if you can't backup a partition or if the recovery starts giving you error.
I flashed MagiskSu rootless with twrp. Initially worked properly, (but not all softwares were working with it)...after trying to install viper4android, my OS corrupted...Launcher didn't started anymore when I turned up my phone...I could only see the background and go in settings app....I restored my phone with twrp but it had been useless...I had to format data partition. After that, my phone restored properly.
I was having problem with booting into system...it took every time 66 seconds, and I had only few modules installed. Something were wrong. I installed Apps2sd, but it gave me some problems...sometimes was not able to mount partition or to write the script. Then I did the wrost choice of my life. I allowed this app to edit System partition. All the phone corrupted. I was not able to boot into system after reboot. DON'T ALLOW SOFTWARES TO EDIT SYSTEM PARTITION. Then i restored the phone with twrp, but after this, my phone was damaged: No Audio, No microphone, NO camera working, I couldn't play any video or song....it was corrupted. I've tryed to restore system partition, vendor partition, boot image....everything was useless. I flashed the stock recovery and did factory reset...nothing. I flashed stock boot.img...nothing was working.
I've tryed last chace, to flash all stock rom with adb sideload: adb failed. I tryed with fastboot: failed. I at least tryed to flash manually system, vendor, boot and recovery partition with fastboot....but It ended with my phone totally bricked (I think Fastboot didn't worked properly, it gave me some errors). I had wiped all the partition before doing this...but something tell me that fastboot didn't flashed correctly stock partition.
The only thing that is left in my phone is eRecovery, I can't use usb debug, Third parts can not communicate with the phone. I can only reboot, shutdown, and try to download the "lastest version" from server...but it fails at every try. My phone is not accessible anymore.
My advice is NOT TO ROOT HUAWEI P8 LITE 2017. Wait for developers to create advanced software more compatible with this new device.
Now I want to ask help: is there something I can do right now? Why doesn't erecovery work? Is there something I can do with Huawei Support? I have to sent my phone to restore it?
Click to expand...
Click to collapse
Flash Huawei ROM with keys.
First search for rollback ROM and flash it then flash full rom.
.
hamzio7 said:
Hey bro...if your phone's bootloader is unlocked as you said...
You can do those easy steps
Download HUAWEI UPDATE EXTRACTOR 9.9.3
Use it to extract the following partitions
System.img
Recovery.img
Boot.img
And other files that you need and copy them into adb.exe folder
Then boot your phone into bootloader
And then use those commands to flash the partitions
fastboot flash system system.img
And
Fastboot flash boot boot.img
And
fastboot flash recovery recovery.img
The flashing process will take a while on system partition
And then do a factory reset using stock recovery
And then the phone should boot up
Sent from my PRA-LA1 using Tapatalk
Click to expand...
Click to collapse
Thank you but I've already done this passages when my phone were soft-bricked. It could have helped me, but now the problem is bigger: any partition is corrupted, there's no way I can go into bootloader, and there's no way I can interact with my phone form a pc
persona78 said:
Flash Huawei ROM with keys.
First search for rollback ROM and flash it then flash full rom.
.
Click to expand...
Click to collapse
I can't flash anything since my phone can not interact with any machine...there's no more recovery partition working, no more system partition working...boot image is ok but I can't boot anything. Fastboot mode works only if system partition works too.
0000729399 said:
I can't flash anything since my phone can not interact with any machine...there's no more recovery partition working, no more system partition working...boot image is ok but I can't boot anything. Fastboot mode works only if system partition works too.
Click to expand...
Click to collapse
Yes, you can recover your device because erecovery is working !
You need a MicroSD card, create a folder/directory named "dload" and inside put the UPDATE.APP ( full firmware for your device ) . Put the MicroSD card into your device and keep pressing at the same time all three hardware buttons ( volume +, volume - and power ) ... your device will start automaticly to install UPDATE.APP - if UPDATE.APP is compatible 100% with your device !
Good luck !
surdu_petru said:
Yes, you can recover your device because erecovery is working !
You need a MicroSD card, create a folder/directory named "dload" and inside put the UPDATE.APP ( full firmware for your device ) . Put the MicroSD card into your device and keep pressing at the same time all three hardware buttons ( volume +, volume - and power ) ... your device will start automaticly to install UPDATE.APP - if UPDATE.APP is compatible 100% with your device !
Good luck !
Click to expand...
Click to collapse
Thank you...I tryied, but didn't work...it says "restore failed"...maybe the UPDATE.APP is not full compatible with my phone. If anybody can give me the update.zip of Huawei P8 lite 2017 PRA-LX1 TIM BRAND (PRA-LX1C55B105), I'm here awaiting for it.
Could I try to flash a No Brand Firmware from dload folder?
Another question to you..could I have done something bad that doesn't allow erecovery to work properly? I didn't touch that partition.
Ok I've done researches and I realized that the firmware of my phone doesn't exist yet. The one I tryed to flash has a very similiar build code but it's different., I noticed it right now, I'm not surprised my phone is dead. I can only wait for developers to put that one on internet.
Or I can try to install from dload folder another firmware that is compatible with my phone...If anybody know something about it, tell me please :/
0000729399 said:
Thank you...I tryied, but didn't work...it says "restore failed"...maybe the UPDATE.APP is not full compatible with my phone. If anybody can give me the update.zip of Huawei P8 lite 2017 PRA-LX1 TIM BRAND (PRA-LX1C55B105), I'm here awaiting for it.
Could I try to flash a No Brand Firmware from dload folder?
Another question to you..could I have done something bad that doesn't allow erecovery to work properly? I didn't touch that partition.
Click to expand...
Click to collapse
Yes, "restore failed !" is because firmware not match 100% your device !
0000729399 said:
Ok I've done researches and I realized that the firmware of my phone doesn't exist yet. The one I tryed to flash has a very similiar build code but it's different., I noticed it right now, I'm not surprised my phone is dead. I can only wait for developers to put that one on internet.
Or I can try to install from dload folder another firmware that is compatible with my phone...If anybody know something about it, tell me please :/
Click to expand...
Click to collapse
I found PRA-LX1C55B120 in firmware finder.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v82870/f1/full/update.zip
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
dominj97 said:
I found PRA-LX1C55B120 in firmware finder.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v82870/f1/full/update.zip
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
Click to expand...
Click to collapse
oh my god, do you know if is it trustable? Do you know if somebody has tryed it? I'm gonna try it right now.
dominj97 said:
I found PRA-LX1C55B120 in firmware finder.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v82870/f1/full/update.zip
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
Click to expand...
Click to collapse
Restore Failed....Again.
Maybe the file you gave me is not the right one, or maybe my phone is not able to restore a phone starting from an updated Firmware like the b120 verision...maybe eRecovery wants the stock version, the b105.
I always do this things: I extract all the contents of update.zip in a folder named "dload" on a SD card...then I put the card into my phone and launch eRecovery. I hope I'm not missing any passage.
Does anybody know is eRecovery needs the stock update of the Firmware to restore it?
Could anybody find the PRA-LX1C55B105 (TIM BRAND = C55) Firmware?
0000729399 said:
Restore Failed....Again.
Maybe the file you gave me is not the right one, or maybe my phone is not able to restore a phone starting from an updated Firmware like the b120 verision...maybe eRecovery wants the stock version, the b105.
I always do this things: I extract all the contents of update.zip in a folder named "dload" on a SD card...then I put the card into my phone and launch eRecovery. I hope I'm not missing any passage.
Does anybody know is eRecovery needs the stock update of the Firmware to restore it?
Could anybody find the PRA-LX1C55B105 (TIM BRAND = C55) Firmware?
Click to expand...
Click to collapse
That firmware is impossible to find. Maybe because it is Tim branded. But don't worry you can flash any firmware, no branded too. You can try as I done the last week, to flash with fastboot system, boot and recovery. These images are present in the update.app of the PRA-LX1C432B110, and you can use huawei update extractor to get that images. Good luck my friend!
Manuele1000 said:
That firmware is impossible to find. Maybe because it is Tim branded. But don't worry you can flash any firmware, no branded too. You can try as I done the last week, to flash with fastboot system, boot and recovery. These images are present in the update.app of the PRA-LX1C432B110, and you can use huawei update extractor to get that images. Good luck my friend!
Click to expand...
Click to collapse
I can't flash anything because my phone is bricked...I can only use eRecovery, and I can not comunicate with my phone with a computer. I have to wait for somebody to extract the Firmware or I don't know.
I've already done the passage you wrote, to flash boot and recovey, when my phone was corrupted but NOT bricked. I restored my phone but it didn't solved issues I was having. Now I can't do anything. I can only use eRecovery.
I am not advising or telling that it would be a good idea, but you could try to install the TWRP-Recovery using the prague.img from the "[How To Root] Huawei P8 lite 2017 [PRA-LX1]-Android 7.0-EMUI 5.0" and if it success then trying to restore the PRA-LX1C432B100 firmare which can be found on "[Request] PRA-LX1 C432 oeminfo".
CAUTION: If you succeed you'll have the two SIM version of the firmware and all info of your original firmware will be lost which means that your warranty will definitely be void (it most likely is already).
jtvu said:
I am not advising or telling that it would be a good idea, but you could try to install the TWRP-Recovery using the prague.img from the "[How To Root] Huawei P8 lite 2017 [PRA-LX1]-Android 7.0-EMUI 5.0" and if it success then trying to restore the PRA-LX1C432B100 firmare which can be found on "[Request] PRA-LX1 C432 oeminfo".
CAUTION: If you succeed you'll have the two SIM version of the firmware and all info of your original firmware will be lost which means that your warranty will definitely be void (it most likely is already).
Click to expand...
Click to collapse
Thank you too...but It's the million time I say: I CAN'T FLASH ANYTHING BECAUSE MY PHONE IS TOTALLY BRICKED.
My phone is totally corrupted, the only thing I can do is to use eRecovery. Every other solution dealing with using PC to do things on phone has been tryied when the phone were SOFT BRICKED, and doesn't work anymore because the phone is at 90% HARD BRICKED.
0000729399 said:
Thank you too...but It's the million time I say: I CAN'T FLASH ANYTHING BECAUSE MY PHONE IS TOTALLY BRICKED.
My phone is totally corrupted, the only thing I can do is to use eRecovery. Every other solution dealing with using PC to do things on phone has been tryied when the phone were SOFT BRICKED, and doesn't work anymore because the phone is at 90% HARD BRICKED.
Click to expand...
Click to collapse
Are you saying that you can't go to fastboot too? Or if you can, it gives you error to every flash? But don't worry, if you can use erecovery, try This: You'll notice that you have to pay for this. Good Luck!
https://funkyhuawei.club/register
Manuele1000 said:
Are you saying that you can't go to fastboot too? Or if you can, it gives you error to every flash? But don't worry, if you can use erecovery, try This: You'll notice that you have to pay for this. Good Luck!
https://funkyhuawei.club/register
Click to expand...
Click to collapse
Thank you so much, I realized that Fastboot was not corrupted!
But...
I tryied to flash system, recovery and boot images, then I did the Factory Reset from recovery...but It didn't worked, my phone bootloops like there's no System installed.
I have two hypotesis: 1) Fastboot is not able to flash properly the system partition on Huawei P8 lite 2017, even though it says that the process has been successful.
2) The system I flashed is not compatible...I extracted the system.img file from a PRA-LX1C55B120 (Found with Firmware Finder), while my version was PRA-LXC55B105....Maybe it pretends the B105, and refuses the B120. But they should be the same thing
This is impossible.
0000729399 said:
Thank you so much, I realized that Fastboot was not corrupted!
But...
I tryied to flash system, recovery and boot images, then I did the Factory Reset from recovery...but It didn't worked, my phone bootloops like there's no System installed.
I have two hypotesis: 1) Fastboot is not able to flash properly the system partition on Huawei P8 lite 2017, even though it says that the process has been successful.
2) The system I flashed is not compatible...I extracted the system.img file from a PRA-LX1C55B120 (Found with Firmware Finder), while my version was PRA-LXC55B105....Maybe it pretends the B105, and refuses the B120. But they should be the same thing
This is impossible.
Click to expand...
Click to collapse
Exclude the first hypothesis, because FASTBOOT is 100% trusted. I think that you need to download from firmware finder this version: PRA-LX1C432B110. This version should work. Unzip the update.zip downloaded and with Huawei Update Extractor get the System, boot and recovery images. Then flash everything with fastboot, like this: Fastboot flash system System.img
Remember that commands are case sensitive so be careful. Good luck!
Manuele1000 said:
Exclude the first hypothesis, because FASTBOOT is 100% trusted. I think that you need to download from firmware finder this version: PRA-LX1C432B110. This version should work. Unzip the update.zip downloaded and with Huawei Update Extractor get the System, boot and recovery images. Then flash everything with fastboot, like this: Fastboot flash system System.img
Remember that commands are case sensitive so be careful. Good luck!
Click to expand...
Click to collapse
ok I'll try right now but why that version should work? Do I have to flash only the system partition?
I was curious, is there anyway to flash the firmware and modem through fastboot instead of TWRP? I accidentally downloaded the OP3 firmware instead of OP3T and then flashed it and well you know how that goes. Thankfully this phone almost impossible to brick even when doing the worst. It shows up in the computer and my bootloader is unlocked, and i was wondering, instead of losing everything and following the unbrick guide if there are actually commands or ways to flash it through fastboot so i don't have to fully wipe the phone? I have TWRP backups that are from yesterday on the phone, so if there was a way to restore that at the very least if i did have to do the full flash then thats fine too. I guess if the unbrick tool didn't wipe out internal storage or something thats fine. Any help is appreciated.
M3drvr said:
I was curious, is there anyway to flash the firmware and modem through fastboot instead of TWRP? I accidentally downloaded the OP3 firmware instead of OP3T and then flashed it and well you know how that goes. Thankfully this phone almost impossible to brick even when doing the worst. It shows up in the computer and my bootloader is unlocked, and i was wondering, instead of losing everything and following the unbrick guide if there are actually commands or ways to flash it through fastboot so i don't have to fully wipe the phone? I have TWRP backups that are from yesterday on the phone, so if there was a way to restore that at the very least if i did have to do the full flash then thats fine too. I guess if the unbrick tool didn't wipe out internal storage or something thats fine. Any help is appreciated.
Click to expand...
Click to collapse
If you're experienced, you can actually flash each individual partition image file back to each partition on your phone using fastboot flash file partition. So yes, if you know what you're doing you could just restore the firmware partitions and you should be back on track. However if you accidentally flash to the wrong partitions you could potentially brick your phone. ?
pitrus- said:
If you're experienced, you can actually flash each individual partition image file back to each partition on your phone using fastboot flash file partition. So yes, if you know what you're doing you could just restore the firmware partitions and you should be back on track. However if you accidentally flash to the wrong partitions you could potentially brick your phone.
Click to expand...
Click to collapse
I'm perfectly comfortable flashing partitions. Done it many times with old HTC's and Nexus's. I just need to know what the actual names of the files are that i'd need to extract from the zips is the other thing.
M3drvr said:
I'm perfectly comfortable flashing partitions. Done it many times with old HTC's and Nexus's. I just need to know what the actual names of the files are that i'd need to extract from the zips is the other thing.
Click to expand...
Click to collapse
Well, I've never really had to do this on the 3t. Last was on an old Huawei mediapad, but you can Google all the partition dumps in the latest full OTA zip, some are self explaining.
hey @M3drvr,
i have now the same problem as you had. i flashed accidentally the wrong firmware file for my op3t and it stucks now at the oneplus booting screen. how did you solved your issue back then? any help is appreciated.
the solution for my problem is to flash the correct firmware via pc - but i dont know how..
mcdachpappe said:
hey @M3drvr,
i have now the same problem as you had. i flashed accidentally the wrong firmware file for my op3t and it stucks now at the oneplus booting screen. how did you solved your issue back then? any help is appreciated.
the solution for my problem is to flash the correct firmware via pc - but i dont know how..
Click to expand...
Click to collapse
With the unbrick tool in the general section.
Hi all,
I am new to the BLU R1 HD scene. Just got my phone this week. It's a amazon prime variant with firmware v7.4.2 (or v7.2.4?).
I got twrp installed and wiped everything through TWRP, including the internal storage - which removed my only NANDroid backup image.
My phone would freeze at the startup BLU logo now. But I could still enter recovery mode (TWRP). And I could still see the TWRP folder from my Ubuntu (which shows as a internal storage drive)
What should I do? Is there a way to flash it back to stock ROM? Where can I download a stock rom?
I am in panic mode now. Any help would be greatly appreciated!!
jimmythefung said:
Hi all,
I am new to the BLU R1 HD scene. Just got my phone this week. It's a amazon prime variant with firmware v7.4.2 (or v7.2.4?).
I got twrp installed and wiped everything through TWRP, including the internal storage - which removed my only NANDroid backup image.
My phone would freeze at the startup BLU logo now. But I could still enter recovery mode (TWRP). And I could still see the TWRP folder from my Ubuntu (which shows as a internal storage drive)
What should I do? Is there a way to flash it back to stock ROM? Where can I download a stock rom?
I am in panic mode now. Any help would be greatly appreciated!!
Click to expand...
Click to collapse
take it easy . sounds like you wiped /system too. but that is ok since you still have access to twrp
take a rom from here
https://forum.xda-developers.com/r1-hd/development/modified-8-3-stock-rom-t3602672
copy it to the phone (internal storage) as seen from your ubuntu.
boot to twrp and select install, browse to the zip file copied to internal
mrmazak said:
take it easy . sounds like you wiped /system too. but that is ok since you still have access to twrp
take a rom from here
https://forum.xda-developers.com/r1-hd/development/modified-8-3-stock-rom-t3602672
copy it to the phone (internal storage) as seen from your ubuntu.
boot to twrp and select install, browse to the zip file copied to internal
Click to expand...
Click to collapse
Oh my god that's good to hear! (especially from someone who knows his stuff!)
I was just looking at that other thread you posted.
Okay I give that a try. Thanks much!
It fixed my phone just as you said! The v8.4 rom is even better with higher level security update. Thanks!
Once you have twrp installed, you can recover from most things that go wrong.
One exception is when people do a "wipe all" and erase the phone's MEID unique identification. When that happens, the phone can boot and work but can no longer be connected to a phone service provider's network.
And the more common problem with this phone is people who accept an over-the-air update that disables SP Flash Tool and then want to get root or flash their phones. They are out of luck at that point.