[Q] [X2013 XT1058] USB Debugging keeps turning off automatically - Moto X Q&A

Whenever i try to turn on usb debugging, it turns off automatically when i leave the settings page.
Im using the original USB cable, running stock 4.4.4 with root.
Already tried another cable and another PC, didnt work.
Any way that i can fix this?

In developer options, you check it and after you go back its unchecked again?
Just checking if that's what you mean, cause I'm not sure what the cable has to do with it? ?

Darth said:
In developer options, you check it and after you go back its unchecked again?
Just checking if that's what you mean, cause I'm not sure what the cable has to do with it?
Click to expand...
Click to collapse
Yeah, thats whats happens. I have a gif of it, but cant post here because im a new member, :b
Yeah, i dont know why i talked about the cable, lol.

Are you rooted? Have you froze or uninstalled apps you aren't exactly sure what they are? Something connected to USB debugging could be frozen, or missing.
Other than that, I've never had that issue personally... And had a peek around and couldn't find anything similar either really.
You may need to consider a factory reset... Though I'm thinking that won't do it. Or flashing your stock firmware again. 4.4.4 again, if it's available.... Cause downgrading not a good option, without likely bricking.
That's all I can think of.

Do you have anything checked under settings-> security-> device administrators? I had something once on another phone that had an app with administrator access that blocked some things.

linuxgator said:
Do you have anything checked under settings-> security-> device administrators? I had something once on another phone that had an app with administrator access that blocked some things.
Click to expand...
Click to collapse
Just Cerberus and motorola manager.

Darth said:
Are you rooted? Have you froze or uninstalled apps you aren't exactly sure what they are? Something connected to USB debugging could be frozen, or missing.
Other than that, I've never had that issue personally... And had a peek around and couldn't find anything similar either really.
You may need to consider a factory reset... Though I'm thinking that won't do it. Or flashing your stock firmware again. 4.4.4 again, if it's available.... Cause downgrading not a good option, without likely bricking.
That's all I can think of.
Click to expand...
Click to collapse
Im rooted, but havent freezed anything. Stock firmware is my only chance,

You've only just created this thread. I'd give it a bit and see if other ideas come along. ?

PedroAlba said:
Just Cerberus and motorola manager.
Click to expand...
Click to collapse
Try unchecking one then rebooting. If that doesn't help, try the other one. Not sure if it will work though, but it's worth a try.

You can also try it in safe mode, that should disable any third party apps that might be interfering.
to reboot into safe mode long press the Power Off option that pops up when you hold down the power button.

dtg7 said:
You can also try it in safe mode, that should disable any third party apps that might be interfering.
to reboot into safe mode long press the Power Off option that pops up when you hold down the power button.
Click to expand...
Click to collapse
Tried. Debugging still turns off, :/

Tried safe mode. Debugging still turns off. :/

PedroAlba said:
Tried safe mode. Debugging still turns off. :/
Click to expand...
Click to collapse
OK well spitballing some ideas....
- I assume you're not trying this while connected to computer. if you are, then try it while disconnected. you could also try updating the drivers.
- right after USB debugging toggle there's an option to revoke USB debugging authorization. you could try that then plug it to a computer and reauthorize (maybe without leaving settings).
- you say you're rooted. try turning off root temporarily, see if that's causing some complications. or try re-rooting.
- lastly you could try clearing data for the settings app. this will reset some stuff that you'll have to manually reorganize. preview of what will happen see here: http://android.stackexchange.com/qu...ata-for-the-settings-app-com-android-settings

dtg7 said:
OK well spitballing some ideas....
- I assume you're not trying this while connected to computer. if you are, then try it while disconnected. you could also try updating the drivers.
- right after USB debugging toggle there's an option to revoke USB debugging authorization. you could try that then plug it to a computer and reauthorize (maybe without leaving settings).
- you say you're rooted. try turning off root temporarily, see if that's causing some complications. or try re-rooting.
- lastly you could try clearing data for the settings app. this will reset some stuff that you'll have to manually reorganize. preview of what will happen see here: http://android.stackexchange.com/qu...ata-for-the-settings-app-com-android-settings
Click to expand...
Click to collapse
Revoked USB debugging authorization, nope.
Removed root from SUPERsu, nope.
Cleared settings data, nope.
Original firmware may be the way to go, :/

its the admin app settings
Please just go into your Cerebus app, tap on settings in the upper left corner of your screen, scroll down to where it says "prevent USB debugging (this requires a background service) and uncheck the option. no need to save or reboot, but you might anyway. Your problem will be solved.

ElwOOd_CbGp said:
Please just go into your Cerebus app, tap on settings in the upper left corner of your screen, scroll down to where it says "prevent USB debugging (this requires a background service) and uncheck the option. no need to save or reboot, but you might anyway. Your problem will be solved.
Click to expand...
Click to collapse
It worked!
Thanks

same thing happened to me. I was getting pissed off because I hate fishy stuff going on in the background. I'm kind of a control freak when it comes to processes and stuff running on my device. Glad I could help.

Related

[SOLVED] Rooting Issues

hi
clearly this wasn't as simple as the unrevoked method for my last phone,
I ran the script 'root many phone' and it cracked on whilst moaning about permissions and by the time it had finished the phone restarted a bit broken.
It had not play store, none of the previous apps on, wasn't actually rooted at all.
I managed to get play back on there but installing via adb.exe from the command line, and its almost like when I install something, that was on there before, it still has all the settings, so not quite sure what has gone on.
can anyone offer some advice, is it simplest to somehow get myself back to stock and start agin.
maybe I didnt run the root script from the right place. - phone was on and plugged in , usb debugging enabled.
any help much appreicated
I don't know of starting fresh is the 'best' option, but if you haven't done anything that you can't miss our can't do again it's never a wrong try.
Some people also reported that you need allow test locations on. And allow installation of external apps must also be set.
You can always try re rooting without reinstalling.
If you want to reinstall you're best of using Sony update service. Googling is fastest way to find it (not Sony pc companion)
Good luck,
And don't forget to mark your thread solved if it is solved
Did this help? Don't forget to press the thanks button
Sent from my LT30p using xda premium
http://forum.xda-developers.com/showthread.php?t=1914673
have you tried this method? I used it no problem last night.
welshkid said:
http://forum.xda-developers.com/showthread.php?t=1914673
have you tried this method? I used it no problem last night.
Click to expand...
Click to collapse
That's the root many android script he already used according to his post
Did I help? Then please don't forget to press the thanks button.
it's your question solved? Then mark your question solved in your title.
Sent from my Xperia T using XDA Premium.
hi
yes that was what I tried
do I need anything more than that script? (eg those ftf files i keep reading about?)
does the phone need to be on, or in the volume down on boot state
it appears I need 'test locations' and 'external apps' set
anything else I need?
i will try again today at some point
thanks
sure I am being a spanner, but I cant even find the test locations or external apps setting anywhere?
where might that be?
unless test locations is 'mock locations' (guess so)
stilll not finding the external apps option, thought it would be in apps setting somewhere..?
ok found that too in security > unknown sources.
ignore me
That root script didn't work for me either; it kept asking me to connect my device with USB-debugging enabled even though I had already done that.
I would suggest getting back to stock and trying again, BUT use FlashTool instead. It worked perfectly for me in mere seconds.
yesyesimanoob said:
That root script didn't work for me either; it kept asking me to connect my device with USB-debugging enabled even though I had already done that.
I would suggest getting back to stock and trying again, BUT use FlashTool instead. It worked perfectly for me in mere seconds.
Click to expand...
Click to collapse
I downloaded version 0.9.0.0 version, but no XperiaT in the list when I plug it in..
which phone did you pick?
presume the steps are
1. download flashtool
2. Install it on your PC
3. Run the Flashtool and connect your phone (enable USB debugging first)
4. Hit the Root button (second in row)
5. When you see "waiting for restore to finish" open your phone and run Backup&Restore app and restore RootMe.tar file.
6. Wait until Flashtool do the rest of work
thanks
xda-nat said:
I downloaded version 0.9.0.0 version, but no XperiaT in the list when I plug it in..
which phone did you pick?
presume the steps are
1. download flashtool
2. Install it on your PC
3. Run the Flashtool and connect your phone (enable USB debugging first)
4. Hit the Root button (second in row)
5. When you see "waiting for restore to finish" open your phone and run Backup&Restore app and restore RootMe.tar file.
6. Wait until Flashtool do the rest of work
thanks
Click to expand...
Click to collapse
If you mean in the adb drivers list, select Xperia TX. That was the only time I had to select a device.
OK finally success
although using the initial method.
maybe the problem was created by reading the 'root many phones' thread and where it says there is a special case for Xperia T/S etc I took that to mean when running the tool, to pick option '2) special case Xperia S tablet etc' - which didn't work
ran it again picked option '1) Normal' which did work
thanks for all your help
nat
Not necessarily relevant to the OP's problem but I thought I'd share in case it helps anyone else out...
When I tried rooting using Bin4ry's method I kept getting a adb server out of date error and the root failed.
I eventually traced this to having DROID explorer installed which was forcing an old version of adb to be running and stopped the newer version from starting up.
Once I uninstalled the old version I was able to runMe and root the phone.

[Q] A challenge for Captivate users!

Hey, im in Jamaica and ive got a challenge for Captivate users. No one has been able to figure this dilema out. Hopefully someone can solve this.
My captivates usb port has stopped doing anything. The details are:
1. The phone works fine and used to be rooted but the root is corrupt i think. Super user installed but the phone behaves unrooted and SU gives errors.
2. I cant flash ROMs since there is no usb.
3. Cannot sideload as the phone cant receive the AT&T OTA update since im in Jamaica.
4. I changed the USB port but same result (no charge, no connection to pc)
Im thinking the usb is bricked since the person i got it from says it charged the day before she reset the phone to give to me.
5. Cant update.zip via 3 recovery (i get e: siganture verification failed)
Can anyone figure this out!? Im thinking its impossible now. If only i could use sideload wonder machine wirelessly, then i could use Z4ROOT or Visionary to flash.
Maybe stupid question. But do u have the Samsung USB drivers installed? If yes then probably need a new USB cord. Try a different one.
saintnova said:
Hey, im in Jamaica and ive got a challenge for Captivate users. No one has been able to figure this dilema out. Hopefully someone can solve this.
My captivates usb port has stopped doing anything. The details are:
1. The phone works fine and used to be rooted but the root is corrupt i think. Super user installed but the phone behaves unrooted and SU gives errors.
2. I cant flash ROMs since there is no usb.
3. Cannot sideload as the phone cant receive the AT&T OTA update since im in Jamaica.
4. I changed the USB port but same result (no charge, no connection to pc)
Im thinking the usb is bricked since the person i got it from says it charged the day before she reset the phone to give to me.
5. Cant update.zip via 3 recovery (i get e: siganture verification failed)
Can anyone figure this out!? Im thinking its impossible now. If only i could use sideload wonder machine wirelessly, then i could use Z4ROOT or Visionary to flash.
Click to expand...
Click to collapse
You went through this thread yet? http://forum.xda-developers.com/showthread.php?t=1953930
1. Ive tried several usb cables but no response.
2. If the phone wont even charge via usb then im not sure installing the drivers will help.
3. Whats the jig supposed to do? Get me into download? If so, when i hold the volume buttons and power button, it takes me to a screen that gives me the options to clear cache, user data, and reinstall packages. but when i try various update.zip files i get the signed verification failed message. I think this is recovery mode but ill search for how to get into download mode. Does download mode work without usb?
Tried entering download mode but i guess since the usb doesnt work, thats why it doesnt function.
saintnova said:
1. Ive tried several usb cables but no response.
2. If the phone wont even charge via usb then im not sure installing the drivers will help.
3. Whats the jig supposed to do? Get me into download? If so, when i hold the volume buttons and power button, it takes me to a screen that gives me the options to clear cache, user data, and reinstall packages. but when i try various update.zip files i get the signed verification failed message. I think this is recovery mode but ill search for how to get into download mode. Does download mode work without usb?
Tried entering download mode but i guess since the usb doesnt work, thats why it doesnt function.
Click to expand...
Click to collapse
If the phone doesn't charge through the usb, you need a new usb port on your phone. If you know how to solder, you can probably get one for cheap and look at videos on how to do it. Otherwise, you can go through mobiletechvideos.com to get it replaced.
As for download mode, it's vol down + power.
BWolf56 said:
If the phone doesn't charge through the usb, you need a new usb port on your phone. If you know how to solder, you can probably get one for cheap and look at videos on how to do it. Otherwise, you can go through mobiletechvideos.com to get it replaced.
As for download mode, it's vol down + power.
Click to expand...
Click to collapse
The usb port was changed but the result was the same. All this happened after the person wiped the phone before i got it. Before that the usb port worked fine. Trying to put it into download mode now but a question again is, will it work if the usb port doesnt work?
Tried volume down + power but phone just boots as normal.
Im on froyo 2.2
saintnova said:
The usb port was changed but the result was the same. All this happened after the person wiped the phone before i got it. Before that the usb port worked fine. Trying to put it into download mode now but a question again is, will it work if the usb port doesnt work?
Tried volume down + power but phone just boots as normal.
Im on froyo 2.2
Click to expand...
Click to collapse
The other way to fix this would be sideloading but ATT doesnt allow the OTA where im at. Anyway to upload Z4root quickly to googleplay then download it? LOL. My phone only allows apps from google play.
saintnova said:
The other way to fix this would be sideloading but ATT doesnt allow the OTA where im at. Anyway to upload Z4root quickly to googleplay then download it? LOL. My phone only allows apps from google play.
Click to expand...
Click to collapse
There's a security feature, you can uncheck it in your settings.
And holding vol down+power while phone is off will boot it in download mode (don't have the usb plugged in). Also, formatting and resetting a phone doesn't break usb. My guess, the job wasn't done correctly.
Have you tried it on other pc? Perhaps your pc usb port is defective.
BWolf56 said:
There's a security feature, you can uncheck it in your settings.
And holding vol down+power while phone is off will boot it in download mode (don't have the usb plugged in). Also, formatting and resetting a phone doesn't break usb. My guess, the job wasn't done correctly.
Have you tried it on other pc? Perhaps your pc usb port is defective.
Click to expand...
Click to collapse
1. There isnt any such setting on the ATT version of my captivate. I guess that option came after the sideload OTA update.
2. I hold the volume down button and the power when the phone is off but it just boots up as normal. No download mode. Is there a site that keeps update.zips or OTA update that can be pushed?
saintnova said:
1. There isnt any such setting on the ATT version of my captivate. I guess that option came after the sideload OTA update.
2. I hold the volume down button and the power when the phone is off but it just boots up as normal. No download mode. Is there a site that keeps update.zips or OTA update that can be pushed?
Click to expand...
Click to collapse
1. I though I remembered being able to sideload back then (it has been a while) but could be wrong.
2. Not with the signature verification. You'd need a custom recovery (cwm).
Getting in download mode is something that always works (unless you mess up with the bootloaders = bricked phone), just like getting in recovery. It's something that comes with the phone.
Basically, not much can be done on the Captivate without a working usb.
BWolf56 said:
1. I though I remembered being able to sideload back then (it has been a while) but could be wrong.
2. Not with the signature verification. You'd need a custom recovery (cwm).
Getting in download mode is something that always works (unless you mess up with the bootloaders = bricked phone), just like getting in recovery. It's something that comes with the phone.
Basically, not much can be done on the Captivate without a working usb.
Click to expand...
Click to collapse
Any other suggestions with the download mode? I can get into recovery 100% of the time but the vol down + power just turens on the phone. Anyway to get a rooting app from google play? or bypass apk block? Is there anyway to update from att over wifi? I can check for update on the phone but it just hangs there. Guess its cuz im not in the states. Respect though!! If u figure out anything else to try let me know. Bless!!
A way to sideload apps without USB is to download the Google Drive app from the Play Store then upload the APK from your computer to your Drive. Next access your Drive on your phone and select the APK it should begin the regular install.
**you will need to allow 3rd party applications**
guidostein said:
A way to sideload apps without USB is to download the Google Drive app from the Play Store then upload the APK from your computer to your Drive. Next access your Drive on your phone and select the APK it should begin the regular install.
**you will need to allow 3rd party applications**
Click to expand...
Click to collapse
Trying that now. What do i need to do to allow 3rd party apps? Will it just ask me?
Damn!! the third party thing is the same thing that blocks me from installing apps normally! Damn Google/ATT monopoly!!
saintnova said:
Trying that now. What do i need to do to allow 3rd party apps? Will it just ask me?
Click to expand...
Click to collapse
It should ask.
How to do it really depends on which OS you're running.
guidostein said:
It should ask.
How to do it really depends on which OS you're running.
Click to expand...
Click to collapse
Doesnt work, Third party blocked. Trying this but cant find this option http://androidforums.com/inspire-4g-tips-tricks/340745-unknown-sources-now-can-allowed.html
saintnova said:
Doesnt work, Third party blocked. Trying this but cant find this option
Click to expand...
Click to collapse
try going to Setting > Security > Enable Unknown Sources
thats where it is on my phone but im running a custom Rom
if that doesnt work try to find anything in the settings that says enable unknown sources.
---------- Post added at 04:09 PM ---------- Previous post was at 03:57 PM ----------
So I did some reading and if your running stock at&t ROM you most likely are not able to allow unknown sources (because for some reason AT&t blocks it).
You might want to try download an app called AppInstaller by FunTrigger from PlayStore (I have never used this and I'm not sure if it will get around the 3rd party problem you are having but its worth a shot)
You should be able to use it to install the APK in your Drive.
---------- Post added at 04:37 PM ---------- Previous post was at 04:09 PM ----------
Okay I think I've got it. Note that i have not tried this myself and take no responsibility if something goes wrong.
How to enable unknown sources on AT&T phone:
Settings > Applications > Manage Applications > All > select Customization Settings Provider and then Clear Data
Next go back one page and select Settings and then Clear Data
Now in Settings > Applications you should see the option unknown sources select it.
Now unknown sources are enabled!
guidostein said:
try going to Setting > Security > Enable Unknown Sources
thats where it is on my phone but im running a custom Rom
if that doesnt work try to find anything in the settings that says enable unknown sources.
---------- Post added at 04:09 PM ---------- Previous post was at 03:57 PM ----------
So I did some reading and if your running stock at&t ROM you most likely are not able to allow unknown sources (because for some reason AT&t blocks it).
You might want to try download an app called AppInstaller by FunTrigger from PlayStore (I have never used this and I'm not sure if it will get around the 3rd party problem you are having but its worth a shot)
You should be able to use it to install the APK in your Drive.
---------- Post added at 04:37 PM ---------- Previous post was at 04:09 PM ----------
Okay I think I've got it. Note that i have not tried this myself and take no responsibility if something goes wrong.
How to enable unknown sources on AT&T phone:
Settings > Applications > Manage Applications > All > select Customization Settings Provider and then Clear Data
Next go back one page and select Settings and then Clear Data
Now in Settings > Applications you should see the option unknown sources select it.
Now unknown sources are enabled!
Click to expand...
Click to collapse
And this my friend is why search is amazing :thumbup:
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
And this my friend is why search is amazing :thumbup:
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
This option does not appear in my list. Remember i told ya i was reading that hehehe. Dont know why it isnt there though. Sigh. Maybe putting the ATT chip back in will help although i dont think its still activated.
saintnova said:
This option does not appear in my list. Remember i told ya i was reading that hehehe. Dont know why it isnt there though. Sigh. Maybe putting the ATT chip back in will help although i dont think its still activated.
Click to expand...
Click to collapse
I don't know how set you are on keeping your data but why not try a complete factory reset?
And if that doesn't work then just flash a new CWM and ROM,,, there are ways to do that without connecting to a computer.
guidostein said:
I don't know how set you are on keeping your data but why not try a complete factory reset?
And if that doesn't work then just flash a new CWM and ROM,,, there are ways to do that without connecting to a computer.
Click to expand...
Click to collapse
He can't without a usb.. That's just how the captivate is from stock.

Can't connect to pc

Samsung usb drivers are installed but my pc don't recognizes my phone. When I connect the phone windows beeps and I can see the phone on device manager but I cannot access it.
I tried uninstalling drivers and re-installing it, uninstalling and let windows install it but still no go.
Usb debugging enabled and mock locations are allowed. I am running on windows 10
Edit: wanted to create the thread in Q&A section I apologize for wrong section
kuti5344 said:
Edit: wanted to create the thread in Q&A section I apologize for wrong section
Click to expand...
Click to collapse
Did you do anything to your phone before you tried to connect?
Did you try a different port?
Did you try a different cable?
Did you try restarting your Windows machine?
Used package Disabler pro to get rid of bloatware
Tried all of the ports, 2 different cables, restarted the phone and windows more than one
I would suggest enabling the apps you disabled, rebooting, then try again.
I will try another computer to check if the problem is related to my phone or PC.
If its phone, will enable all, if not will inform again
Sent from my SM-N920C using Tapatalk
I tried different computer but still cannot see it and I also enabled all the apps that I disable, nothing happened. Still cannot access the phone via pc
What should I do now?
Edit: I solved the problem. Uninstalled everything then closed the phone installed every thing back then opened it if anyone faces similar problem to mine
kuti5344 said:
I tried different computer but still cannot see it and I also enabled all the apps that I disable, nothing happened. Still cannot access the phone via pc
What should I do now?
Edit: I solved the problem. Uninstalled everything then closed the phone installed every thing back then opened it if anyone faces similar problem to mine
Click to expand...
Click to collapse
what do you uninstall? all your downloaded app?... help...
Lucas1 said:
what do you uninstall? all your downloaded app?... help...
Click to expand...
Click to collapse
It's been a long time. If I am remembering correctly, usb drivers and anything related to it. Try uninstalling all the drivers that related to usb drivers.

LCD broke and USB debugging off

I need help with this desperately, so please bear with me.
For some reason my USB debugging was turned off. I dropped my phone about a foot onto wood floor with a case and the LCD broke. Phone still works as I'm getting notifications and connects to my PC.
Won't show the files because USB debugging is off.
Pretty sure I can't get a cable and hook it up to my TV because its not supported without rooting or without downloading an app which I cannot do, obviously.
So am I done for or is there a way to help me?
I saw somethings here and there but nothing was really detailed or what to do if USB debugging was not enabled.
Please help me!
Thanks.
EDIT: I have not tried recovery mode yet because the phone still has a charge and I'm not sure if that will work anyway
oceangateways said:
I need help with this desperately, so please bear with me.
For some reason my USB debugging was turned off. I dropped my phone about a foot onto wood floor with a case and the LCD broke. Phone still works as I'm getting notifications and connects to my PC.
Won't show the files because USB debugging is off.
Pretty sure I can't get a cable and hook it up to my TV because its not supported without rooting or without downloading an app which I cannot do, obviously.
So am I done for or is there a way to help me?
I saw somethings here and there but nothing was really detailed or what to do if USB debugging was not enabled.
Please help me!
Thanks.
EDIT: I have not tried recovery mode yet because the phone still has a charge and I'm not sure if that will work anyway
Click to expand...
Click to collapse
There is no LCD on this phone
So what are you trying to do? Get the files off your phone? Please can you answer the questions below?
- Is the bootloader unlocked?
- Is the device encrypted?
- Does the device have a screen lock?
Device is working properly and it does not have a screen lock.
I just need to access the file that are on the phone
oceangateways said:
Device is working properly and it does not have a screen lock.
I just need to access the file that are on the phone
Click to expand...
Click to collapse
Please answer my other questions
Also, please note USB debugging is not required for connecting to the phone to get files off it in Windows Explorer
danarama said:
Please answer my other questions
Also, please note USB debugging is not required for connecting to the phone to get files off it in Windows Explorer
Click to expand...
Click to collapse
Not sure about the other 2. It's a stock Nexus 6.
When I plug the phone into the computer it says 'no files' which is because usb debugging is off.
So how would I be able to get the files off the phone?
If its on marshmallow, it will be because the default menu option is USB for charging not MTP transfer.
Have you got twrp? Could try and mount the partition for data, not sure if its possible without a working screen though!
Amos91 said:
If its on marshmallow, it will be because the default menu option is USB for charging not MTP transfer.
Have you got twrp? Could try and mount the partition for data, not sure if its possible without a working screen though!
Click to expand...
Click to collapse
I don't have twrp and I am running marshmallow
oceangateways said:
I don't have twrp and I am running marshmallow
Click to expand...
Click to collapse
Then I don't think there will be anything you can do. I presume touch doesn't work too?
danarama said:
Then I don't think there will be anything you can do. I presume touch doesn't work too?
Click to expand...
Click to collapse
Isn't there a way using Android SDK and [email protected]?
oceangateways said:
Isn't there a way using Android SDK and [email protected]?
Click to expand...
Click to collapse
Yes, once you have enabled USB debugging, which you cannot do.
danarama said:
Yes, once you have enabled USB debugging, which you cannot do.
Click to expand...
Click to collapse
there's no way to bypass that?
oceangateways said:
there's no way to bypass that?
Click to expand...
Click to collapse
No, you need USB debugging for everything except browsing the files, but as mentioned on Marshmallow when you plug a device in, there is a notification you have to select to allow you to set it to allow that.
If touch works, you might be able to do it, with some guidence / screenshots from Marshmallow userrs.
danarama said:
No, you need USB debugging for everything except browsing the files, but as mentioned on Marshmallow when you plug a device in, there is a notification you have to select to allow you to set it to allow that.
If touch works, you might be able to do it, with some guidence / screenshots from Marshmallow userrs.
Click to expand...
Click to collapse
So now with marshmallow a notification pops up when I plug it in?
Can anyone provide me with screen shots? :fingers-crossed:
oceangateways said:
So now with marshmallow a notification pops up when I plug it in?
Can anyone provide me with screen shots? :fingers-crossed:
Click to expand...
Click to collapse
https://www.google.co.uk/search?q=m...ChMIn9L674_3yAIVBMMUCh0D3w8_&biw=1850&bih=995

Lastest update Asus rog phone 2 CN version

I updated my Asus rog phone 2 a couple of days ago and now my USB connection has stop working. I use USB for internet on my computer. I had developer option installed too like in all my previous phones. Updated the phone & lost USB conexión, developer options. Can someone please tell me they are having the same problem & to see if they a fix..
lordangel1221 said:
I updated my Asus rog phone 2 a couple of days ago and now my USB connection has stop working. I use USB for internet on my computer. I had developer option installed too like in all my previous phones. Updated the phone & lost USB conexión, developer options. Can someone please tell me they are having the same problem & to see if they a fix..
Click to expand...
Click to collapse
I have the latest update and I have no issues. Try to disable developer mode and enable it back to reset you device connection with the PC. Make sure you are connected in "File transfer mode" and not in other mode, you might know this but I had to state it just in case. If all fails, you can try to connect to another PC or simply do a factory reset of the phone if that's isn't an issue for you.
hi
can we change firmware ? replace CN fimrware bye US or European Firmware ?
thx
saerdryl2 said:
hi
can we change firmware ? replace CN fimrware bye US or European Firmware ?
thx
Click to expand...
Click to collapse
Yes you can check this thread https://forum.xda-developers.com/rog-phone-2/how-to/guide-convert-cn-to-ww-rom-26-08-t3961042
TO get OTA working do this
https://forum.xda-developers.com/rog-phone-2/how-to/flashing-ww-rom-changing-cn-fingerprint-t3969765
thx dude
Rashad83 said:
I have the latest update and I have no issues. Try to disable developer mode and enable it back to reset you device connection with the PC. Make sure you are connected in "File transfer mode" and not in other mode, you might know this but I had to state it just in case. If all fails, you can try to connect to another PC or simply do a factory reset of the phone if that's isn't an issue for you.
Click to expand...
Click to collapse
Thanks my Rashad. I think I will be doing a factory reset. Dame **** will be losing playstore & all apps. Start from scratch
Rashad83 said:
I have the latest update and I have no issues. Try to disable developer mode and enable it back to reset you device connection with the PC. Make sure you are connected in "File transfer mode" and not in other mode, you might know this but I had to state it just in case. If all fails, you can try to connect to another PC or simply do a factory reset of the phone if that's isn't an issue for you.
Click to expand...
Click to collapse
Rashad83 update I didn't have to do a factory reset. My friend got to work by going to usb preferences seems that the problem was with developer option crashing. I uninstall developer option and now I am using the USB preference with no problem. Thanks Rashad83..

Categories

Resources