Code:
#include
/*
* Your warranty is now void.
* This is [B]NOT[/B] CyanogenOS (Stock ROM), This is CyanogenMod ROM (CM-11.0)
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research if
* you have any concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I build this ROM using CM11.0 source for tomato aka YU Yureka.
I am not the developer of this ROM. I just build this ROM.
This ROM does not have gapps (Google Play Strore & other google goodies). But you can download & install it from http://wiki.cyanogenmod.org/w/Google_Apps
Prerequists: YU should be on stock rom.
Please don't just leech the files and go away. You can easily say thanks just by pressing "Thanks" button.
Download:
ROM: cm-11-20150325-UNOFFICIAL-tomato.zip - 227.45 MB
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MD5Sum: cm-11-20150325-UNOFFICIAL-tomato.zip.md5sum - 124 bytes
Philz Recovery: philz_recovery.img - 8.54 MB
Recovery: cwm_tomato.img - 8.20 MB
gapps: gapps-kk-20140105-signed.zip
Download previous version:
ROM: cm-11-20150313-UNOFFICIAL-tomato.zip - 227.41 MB
MD5Sum: cm-11-20150313-UNOFFICIAL-tomato.zip.md5sum - 124 bytes
ROM: cm-11-20150306-UNOFFICIAL-tomato.zip - 227.98 MB
ROM: cm-11-20150223-UNOFFICIAL-tomato.zip - 227.36 MB
Kernel Update: boot.img - 6.07 MB
MD5Sum: cm-11-20150207-UNOFFICIAL-tomato.zip.md5sum - 124 bytes
ROM: cm-11-20150207-UNOFFICIAL-tomato.zip - 227.35 MB
ROM 05/02/2015 - 227.16 MB
Installation:
First flash recovery image file (CWM recovery)
Code:
sudo fastboot -i 0x1ebf flash recovery cwm_tomato.img
Now boot to this CWM recovery.
FactoryReset/ Clear Data. Clear Cache.
Install cm-11-2015????-UNOFFICIAL-tomato.zip (ROM file) from sdcard.
Reboot system & enjoy CM-11.0 ROM.
If needed download & flash gapps also.
Update Installation:
Download kernel update -> boot.img file.
Go to downloaded file location.
Then flash your kernel (boot.img) using following command.
Code:
sudo fastboot -i 0x1ebf flash boot boot.img
Tested following all are working...
3G, WiFi, voice, Camera, Bluetooth, OTG
Contributors
Cyanogenmod dev, YU Developers
ROM: CyanogenMod
Build date 2015-02-04
Last Updated 2015-03-25
Reviews:
mani30bloom said:
This ROM + ThunderZap Kernal. Working Awesome! Battery back up is decent. Like this one more than Stock ROM. Thanks!
Click to expand...
Click to collapse
RajGopi said:
No i dont have reboot to recovery issue. Mine goes to recovery when i opt for reboot to recovery from power menu.
Battery life awesome than stock rom n than any other rom
Click to expand...
Click to collapse
RohanAJoshi said:
@dumtara : i m using this rom from yesterday..
overall impression is good..
one major thing is transition animations are lot more smoother than any other rom, even better than stock cm11s rom..
thanks for this dev..
keep updating when there are new device or kernel commits done..
Click to expand...
Click to collapse
freakzapster said:
More smooth and battery friendly than what we get out of box.
This is more light.
Sent From My Yureka
Click to expand...
Click to collapse
RohanAJoshi said:
stock is cm11s and this is cm11, so most of things will be same. but we will get fresh build over cm11s (compiled with latest device and kernel commits)
Click to expand...
Click to collapse
PRRash said:
Doesn't install with twrp. Any specific reason for this ?? Able to do good with the shared recovery though..
Rom is smooth and camera has improved a lot with stock CM app.
Click to expand...
Click to collapse
PRRash said:
Anybody facing issue with proximity when on call for longer periods.. For me the screen keeps on during call often i use the dialpad and does not go off again. Also the call screen goes to background after some, i gotta pull down the status bar to get it back. Could not find any settings for this,, am i missing anything here ??
Click to expand...
Click to collapse
My system's status when building ROM.
Anything different from the stock rom..?? Congrats on the rom build..
Sent from my AO5510 using XDA Free mobile app
Any changes apart from the stock
dumtara said:
I build this ROM using CM11.0 source for tomato aka YU Yureka.
I am not the developer of this ROM. I just build this ROM.
This ROM does not have gapps (Google Play Strore & other google goodies)
Prerequists: YU should be on stock rom.
Here is how to install this ROM.
First flash this recovery image file cwm_tomato.img - 8.20 MB (CWM recovery)
Code:
sudo fastboot -i 0x1ebf flash recovery cwm_tomato.img
Download: ROM - 227.16 MB
Now boot to this CWM recovery.
FactoryReset/ Clear Data.
Clear Cache.
Install Zip (ROM file) from sdcard.
Reboot system & enjoy CM-11.0 ROM. If needed flash gapps also.
Tested following all are working...
3G, WiFi, voice, Camera, Bluetooth
Contributors
Cyanogenmod dev
ROM: CyanogenMod
Build date 2015-02-04
Last Updated 2015-02-04
Please check this : http://forum.xda-developers.com/yureka/help/help-build-warning-radio-update-t3021636 Build warning - radio update
Click to expand...
Click to collapse
Dear dumatara,
if i am not offending you. can u tell me ,any new features you have included.
PRRash said:
Anything different from the stock rom..?? Congrats on the rom build..
Sent from my AO5510 using XDA Free mobile app
Click to expand...
Click to collapse
androidgalaxyman said:
Dear dumatara,
if i am not offending you. can u tell me ,any new features you have included.
Click to expand...
Click to collapse
stock is cm11s and this is cm11, so most of things will be same. but we will get fresh build over cm11s (compiled with latest device and kernel commits)
In CPU-Z this ROM is showing battery capacity as 2500mAh, where as in stock rom it shows 2000 mAh
PRRash said:
Anything different from the stock rom..?? Congrats on the rom build..
Sent from my AO5510 using XDA Free mobile app
Click to expand...
Click to collapse
More smooth and battery friendly than what we get out of box.
This is more light.
Sent From My Yureka
Battery.
@dumtara : i m using this rom from yesterday..
overall impression is good..
one major thing is transition animations are lot more smoother than any other rom, even better than stock cm11s rom..
thanks for this dev..
keep updating when there are new device or kernel commits done..
@dumtara : will you please update this rom with new commits from device and kernel tree ?
there are new kernel commit for camera.
https://github.com/CyanogenMod/android_kernel_yu_msm8916/commits/cm-11.0
.
edit : there are also update in blobs :
https://github.com/TheMuppets/proprietary_vendor_yu/commits/cm-11.0
RohanAJoshi said:
@dumtara : will you please update this rom with new commits from device and kernel tree ?
there are new kernel commit for camera.
https://github.com/CyanogenMod/android_kernel_yu_msm8916/commits/cm-11.0
.
edit : there are also update in blobs :
https://github.com/TheMuppets/proprietary_vendor_yu/commits/cm-11.0
Click to expand...
Click to collapse
work started :good:
dumtara said:
work started :good:
Click to expand...
Click to collapse
how much time it will take ?
waiting..
RohanAJoshi said:
how much time it will take ?
waiting..
Click to expand...
Click to collapse
May be by tomorrow I will upload the updated ROM.
edit: updated cm-11-20150207-UNOFFICIAL-tomato.zip - 227.35 MB
dumtara said:
May be by tomorrow I will upload the updated ROM.
edit: updated cm-11-20150207-UNOFFICIAL-tomato.zip - 227.35 MB
Click to expand...
Click to collapse
very fast bro, will test asap and report back..
dumtara said:
May be by tomorrow I will upload the updated ROM.
edit: updated cm-11-20150207-UNOFFICIAL-tomato.zip - 227.35 MB
Click to expand...
Click to collapse
is dirty flash ok or clean flash
freakzapster said:
is dirty flash ok or clean flash
Click to expand...
Click to collapse
If updating from previous build i.e. cm-11-20150204-UNOFFICIAL-tomato.zip, nothing to clean/wipe, I just flashed the newly updated ROM.
But if flashing on Stock ROM, I did clean flash. I have not tested dirty flash.
dumtara said:
If updating from previous build i.e. cm-11-20150204-UNOFFICIAL-tomato.zip, nothing to clean/wipe, I just flashed the newly updated ROM.
But if flashing on Stock ROM, I did clean flash. I have not tested dirty flash.
Click to expand...
Click to collapse
Can you give change log if possible
I'm on 31 / 01 / 15 built
Sent From My Yureka
freakzapster said:
Can you give change log if possible
I'm on 31 / 01 / 15 built
Sent From My Yureka
Click to expand...
Click to collapse
RohanAJoshi said:
@dumtara : will you please update this rom with new commits from device and kernel tree ?
there are new kernel commit for camera.
https://github.com/CyanogenMod/android_kernel_yu_msm8916/commits/cm-11.0
.
edit : there are also update in blobs :
https://github.com/TheMuppets/proprietary_vendor_yu/commits/cm-11.0
Click to expand...
Click to collapse
As mention by RohanAJoshi, new commits over my previous build dated:04022015, included in this ROM.
@dumtara : any new build bro ?
also will you plz try clobbered build this time ?
in new builds, camera quality also improved, will wait for new update.
also manually update blob from this link because sometimes blob remains old. (just delete your blob folder and resync)
RohanAJoshi said:
@dumtara : any new build bro ?
also will you plz try clobbered build this time ?
in new builds, camera quality also improved, will wait for new update.
also manually update blob from this link because sometimes blob remains old. (just delete your blob folder and resync)
Click to expand...
Click to collapse
blob was updated last time from the link given by you using git clone option.
regarding update, is there any new commits.
dumtara said:
blob was updated last time from the link given by you using git clone option.
regarding update, is there any new commits.
Click to expand...
Click to collapse
Yes, some kernel commits.
Related
[ROM][KERNEL][RECOVERY][JB4.2]Infamous AOKP 1.9.1 (12-Jul) && Kernel 2.4 (7-Aug)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on our existing work, we (djmatt604 & kasper_h) have joined forces to bring you the AOKP experience Infamous-style!
This ROM is based on the AOKP jellybean 4.2 sources
To this we added:
-The pershoot device & vendor trees, adapted to our needs
-Our own kernel (based on pershoot's p4 kernel with a large range of additions)
-Some CM/AOKP cherries
-A unique set of homemade patches
Changelog version 1.9.1
-AOKP source code 11-Jul-2013 (including the patch solving the masterkey security flaw in android)
-Kernel 2.2 (see below for details)
Changelog version 1.9.0
-AOKP source code 30-Jun-2013
-Kernel 2.1:
> Updated WiFi driver
> Solution to l2_hsic issue
> Fix for p4 LTE modem
> Update to BFQ
> All these are upstream fixes of pershoot!
-Updated wifi vendor blobs
-Fixes some coding issues with some patches to make things more stable
-Gapps are no longer included, you can flash the gapps package (see download links below)
-Gapps need to be installed for every ROM - no automatic backup/restore
Changelog version 1.8.0
-AOKP source code 26-May-2013
-Kernel 1.7: Revert the wifi-driver patches from kernel & device-tree
-Enabled frandom in device tree
-Solved some problems in Tablet mode with touch screen sensitivity
-Allow custom density & allow changing sys-bar font size
-Allow sys-bar hiding
-Some small under-the-hood improvements
Changelog version 1.7
-AOKP source code 28-Apr-2013
-Many upstream improvements (Ribbon, PermissionManager to name a few)
-Some cherries (see our github for details)
-Some updated gapps
-Kernel version 1.4 (Improved wifi driver thanks to pershoot)
>>This ROM can only be used with this kernel, other custom kernel may cause issues with WiFi!
Changelog version 1.4
-AOKP source code 13-Apr-2013
-Kernel version 1.3 (Added GPU OC)
-Updated gapps (new google play & calendarsync)
Changelog version 1.3
-Added p4vzw/p4tmo to build target
-AOKP source code 06-Apr-2013
Changelog version 1.2
-AOKP source code 04-Apr-2013
-Kernel version 1.2 (see github for details)
-Added the option to add date to systembar clock
-Some small under-the-hood stuff
-Patches added to make CIFS work (I hope, fingers crossed)
All our source code can be found on github:
https://github.com/InfamousAOKP
Installation instructions:
-Reboot to recovery (CWM or TWRP)
-Make a backup of your current ROM
-Wipe system
-Factory reset
-Flash the zip
-Flash a gapps package
-Reboot and enjoy!
Disclaimer:
General disclaimer
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
By using the rom you agree with the above terms!
Specific disclaimer for p4
Code:
#include
/*
* Your warranty is now void.
*
* Both developers involved in this work own a p4wifi/p7510 device. The ROM
* build for p4/p4vzw is based on the same code, using the CyanogenMod device
* tree for p4/p4vzw. Although this should work perfectly fine, we have not tested this
* ROM ourselves on p4/p4vzw. Only use this ROM on p4/p4vzw if you know how to recover
* from a bad flash!
*/
By using the rom you agree with the above terms!
Credits:
-AOKP team
-CyanogenMod team
-pershoot
-rootaxbox & xdafileserver for their download servers
Kernel 2.4
-Upstream updates from pershoot to fix screen flickering
Kernel 2.3
For details:
https://github.com/InfamousAOKP/android_kernel_samsung_p4
Separate download that can be flashed on top of Infamous 1.9/1.9.1, from the download link below.
Recovery
A modded version of TWRP is available. This is based on the latest TWRP source (2.5.0.0 + patches for 2.6 -> 2.6beta). We added a custom boot splash and themed it holo. It can be downloaded from the TWRP folder in the download links below.
Three options to install:
-zip: can be flashed in any recovery you are currently running
-.tar.md5: can be flashed using both Mobile Odin and regular Odin, after renaming to recovery.tar.md5
-.img: copy to sdcard root and rename to recovery.img and use raw writing from terminal (dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p2)
Errors have been reported with flashing using Odin. Our advice is therefore to flash the zip from CWM or an older TWRP recovery.
Downloads:
p4
http://rootaxbox.no-ip.org/kasper_h/roms/p4/
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/p4
p4wifi
http://rootaxbox.no-ip.org/kasper_h/roms/p4wifi/
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/p4wifi
p4vzw
http://rootaxbox.no-ip.org/kasper_h/roms/p4vzw/
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/p4vzw
p4tmo
http://rootaxbox.no-ip.org/kasper_h/roms/p4tmo/
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/p4tmo
gapps
http://rootaxbox.no-ip.org/kasper_h/roms/gapps/
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/gapps
Reserved the second post for more info later
Looks good.. Have any screenshots?
kilometers4 said:
Looks good.. Have any screenshots?
Click to expand...
Click to collapse
Like all JB4.2 ROMs. The ROM has not been themed in any way, but can easily be themed by the user (e.g. choice between phone, phablet, tablet UI, themes etc.).
Right on brother! Welcome aboard! This is gonna be special.
Welcome to the team bro! Now this is what I am talking about!! Might even let my wife take over my N8013 and take her 7510.
Just flashed your recovery with Mobile Odin and now I am stuck on the Samsung Screen. I will try to re-flash it with Odin or go back to CWM if that doesn't work.
Dreameagl said:
Just flashed your recovery with Mobile Odin and now I am stuck on the Samsung Screen. I will try to re-flash it with Odin or go back to CWM if that doesn't work.
Click to expand...
Click to collapse
A flash with Desktop Odin should do the job. I personally only use Desktop Odin...never bought into the mobile one, no offense to the godlike dev responsible for it
Sent from my Infamous Tab.
Sweet
---------- Post added at 09:24 AM ---------- Previous post was at 08:34 AM ----------
jittusm said:
Sweet
Click to expand...
Click to collapse
I guess only a cache and dalvik wipe is sufficient if i am coming from ur previous aokp build right?
That should be all if coming from that previous build, yes. However, there are some other patches and chunks that were not previously part of the base build - back up your apps first in case you do run into any issues, and do a clean flash if something does happen.
jittusm said:
Sweet
---------- Post added at 09:24 AM ---------- Previous post was at 08:34 AM ----------
I guess only a cache and dalvik wipe is sufficient if i am coming from ur previous aokp build right?
Click to expand...
Click to collapse
I always do flashes without wipes. Already did eight in the last days during
testing. Did not wipe anything.
Dreameagl said:
Just flashed your recovery with Mobile Odin and now I am stuck on the Samsung Screen. I will try to re-flash it with Odin or go back to CWM if that doesn't work.
Click to expand...
Click to collapse
Did you take the correct version for your device? I actually used mobile Odin myself before and it works fine. But I actually think flashing in recovery of the zip file is easiest...
Verstuurd van mijn GT-I9000
Finally we have Infamous AOKP on our p4! Thanks a lot kasper
Could you please add your TWRP link to first post or give me link for the p4 one?
soroush0313 said:
Finally we have Infamous AOKP on our p4! Thanks a lot kasper
Could you please add your TWRP link to first post or give me link for the p4 one?
Click to expand...
Click to collapse
If you go to xdafileserver or rootaxbox (download link ROM in OP) you can find a folder twrp. Easiest is to download the zip and flash this in your current recovery.
Verstuurd van mijn GT-I9000
kasper_h said:
I always do flashes without wipes. Already did eight in the last days during
testing. Did not wipe anything.
Did you take the correct version for your device? I actually used mobile Odin myself before and it works fine. But I actually think flashing in recovery of the zip file is easiest...
Verstuurd van mijn GT-I9000
Click to expand...
Click to collapse
I used the P4wifi for my wifi device. There might be an issue with the file as Odin says the md5 hash value is invalid.
Dreameagl said:
I used the P4wifi for my wifi device. There might be an issue with the file as Odin says the md5 hash value is invalid.
Click to expand...
Click to collapse
Did you also try the zip file? A wrong md5 hash seems to point at a faulty download. That is the advantage of the .tar.md5 file, that it checks the file before flashing it.
Verstuurd van mijn GT-I9000
I tried the zip file but I got an error installing it and the installation quit. I actually had to go back to a cwm 4.0.0.4. When I tried to install the zip file this time it worked???
I didn't change anything on the file. I previously had cwm 6.0.3.0. Not sure if that had a bad install or what.
Well now everything seems to be working ok.
Thanks again for this! Running awesome....just in case I'm blind, there is not an option to change the lockscreen image right?
Sent from my GT-P7500 using xda app-developers app
Dreameagl said:
I tried the zip file but I got an error installing it and the installation quit. I actually had to go back to a cwm 4.0.0.4. When I tried to install the zip file this time it worked???
I didn't change anything on the file. I previously had cwm 6.0.3.0. Not sure if that had a bad install or what.
Well now everything seems to be working ok.
Click to expand...
Click to collapse
First time I tried installing I was using TWRP 4.2.1 and it would fail every time but using CWM I had zero issues. I haven't tried with TWRP 4.2.2. So I think the issue was with the older TWRP
Is there something wrong with the ROM. It seems that when I play any video the volume seems super soft. Loving the rom BTW. Its just this issue I'm having.
Sent from my GT-P7500 using XDA Premium HD app
I want to thank you so much for bringing AOKP to the Tab. I've had AOKP (Euroskank's AOSKP) on my Galaxy Nexus for a long time and love it.
I'd been using CM10.1 on my Tab and felt like I'd been in chains for the longest time. Now that I have AOKP it's like the handcuffs have been removed.
Thanks!
Is there a Goo.im page to look for updates?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-★- LiGux-★- Presented to you by CedArctic & Akateha - Team Pear Crew
Welcome to my latest port (WOW there have been like uhm... 12 hours since my last port LOL! )! Anyways, this ROM was ported successfully with no bugs from the HTC Inspire 4G forums. Credits go to coderzs for his original thread..
THIS IS A BETA VERSION. I DO NOT OWN AN XPERIA ARC/S SO I CAN'T TEST IT FOR MYSELF. WHAT IS DONE HERE IS BASED ON MY EXPERIENCE AND THE TESTERS WHO STEP UP TO THE CHALLENGE. PLEASE TEST AND REPORT BUGS BACK!!! THANK YOU!!!
About the ROM
The ROM is really light and smooth, essential for daily use. The zip is just 160 mb with Google Apps included . It has a refreshed UI completely changed (dialpad and contacts are a small exception ) with some neat customization settings. I think the ROM will speak for itself... Enjoy!!!
Bugs:
WiFi- Fixed by besttt hit a thanks button in his post at the sixth page
Root access - fixed by besttt
Disclaimers
The original ROM was created by coderza. He owns his work and all rights to it. I just ported his amazing work to our device so we can enjoy it. All the credit goes to coderzs.
Click to expand...
Click to collapse
As seen on Mustaavalkosta's thread:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
How to install:
[Recommended Kernel: LuPus Kernel + WiFi modules of LuPus]
For Unlocked Bootloaders:
1. Boot to Recovery
2. Factory Data reset
3. Wipe Dalvik
4. Format System
5. Install ROM Zip from Sdcard
6. INSTALL LUPUS KERNEL.
7. Reboot, enjoy and donate a beer to me
Downloads
LiGux for the Xperia Arc/S - Build 5 by besttt
No Google Apps needed (included)
Banner for the fans
Just enter this into your signature:
HTML:
[IMG]http://s14.postimg.org/o46o8e9m9/Banner.jpg[/IMG]
Credits:
coderzs - For the ROM
besttt for fixing the ROM - hit the thanks button in his post in the sixth page
Akateha
Paparigas
FXP and his CM10 builds for the kernel and port base
Mustaavalkosta for the support in all of my developer career (Small one LOL! )
Akateha
Google
CyanogenMod
My family for the support
The XDA community for supporting and answering to all my n00b questions
HTC
Sony Ericsson
Everyone mentioned in the original ROM's thread
The CWM Recovery Project
glevitan for helping me get started with my device
Rizal Lovins
kristiancarl
Reserved for changelog... Enjoy your ROM
What about camera ? Is as good as Stock ics?
DiogoCMartins said:
What about camera ? Is as good as Stock ics?
Click to expand...
Click to collapse
As I said... I don't have an Arc, it would be great if you could test the port and report bugs to me. Thank you
CedArctic said:
As I said... I don't have an Arc, it would be great if you could test the port and report bugs to me. Thank you
Click to expand...
Click to collapse
Ok i download it now and will test ... Can I use this ROM for my second Custom ROM development?
EDIT : Rom doesnt install. set_perm: some changes failed
Same Result here :
set_perm: some changes failed
E:Error in /sdcard/LiGux4.1.2_Port_for_Anzu.zip
(status 7)
Installation aborted.
Click to expand...
Click to collapse
I installed the rom,
but wifi doesnt work, i try the included kernel and the fusion with modules, not working!!! Thats bad cause it looks nice and clean rom.
Dont mind the status7 error, reboot and the rom will start.
parginos said:
I installed the rom,
but wifi doesnt work, i try the included kernel and the fusion with modules, not working!!! Thats bad cause it looks nice and clean rom.
Dont mind the status7 error, reboot and the rom will start.
Click to expand...
Click to collapse
I could fix the Wifi-Error , but my internet is so slow that i could not upload it...
Am i allowed to use this ROM as Base for next Custom ROM?
So Far So Good
Awesome UI & Smooth :good:
Consistent Sim Unlock Screen :bad:
SuperUser Not Working
Will update as I use it more!!
kingserpent said:
Awesome UI & Smooth :good:
Consistent Sim Unlock Screen :bad:
SuperUser Not Working
Will update as I use it more!!
Click to expand...
Click to collapse
Build 3 Uploaded!
CedArctic said:
WiFi-Probably fixed. If you still have wifi problems, install Lupus kernel do a fresh install and flash LuPus WiFi modules and PM me the results. Thank you.
Click to expand...
Click to collapse
u say to flash modules in LuPuS kernel but there are no modules needed to be flash we have to just flash the kernel
kvrjsoni said:
u say to flash modules in LuPuS kernel but there are no modules needed to be flash we have to just flash the kernel
Click to expand...
Click to collapse
I was told that modules had to be flashed... anyways did you test it?
Seems interesting! Going to try
Lord_Snake said:
Seems interesting! Going to try
Click to expand...
Click to collapse
If you have tested it a bug report would be great thanks .
CedArctic said:
If you have tested it a bug report would be great thanks .
Click to expand...
Click to collapse
I'm downloading. Should I use Lupus directly and ignore the kernel on the zip?
Lord_Snake said:
I'm downloading. Should I use Lupus directly and ignore the kernel on the zip?
Click to expand...
Click to collapse
You can try the original kernel and if the wifi does not work make a fresh install with lupus...
Lord_Snake said:
I'm downloading. Should I use Lupus directly and ignore the kernel on the zip?
Click to expand...
Click to collapse
I was not able to install. Got an error:
set_perm: some changes failed
(Status 7)
Installation aborted!
Lord_Snake said:
I was not able to install. Got an error:
set_perm: some changes failed
(Status 7)
Installation aborted!
Click to expand...
Click to collapse
Ignore it... just proceed to boot.
Nope.... i try with lupus, but still no wifi. i dont have connection not even with data usage.
SU works fine with out the fix.
CedArctic said:
Ignore it... just proceed to boot.
Click to expand...
Click to collapse
Yes, strangely, it booted.
parginos said:
Nope.... i try with lupus, but still no wifi. i dont have connection not even with data usage.
SU works fine with out the fix.
Click to expand...
Click to collapse
+1. Wifi does not work... LiGux Blocker force close. LiGux App Weather widget also FC.
Shame, cus the ROM is super snappy and I just love the lockescreen.
I AM WHOLEHEARTEDLY THANKFUL TO THEM FOR ENABLING OUR DEVICE WITH CYANFOX
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanFox is a free, community built distribution of Android 4.4.2 kitkat which greatly extends the capabilities of your phone and to increase performance and reliability over stock Android for your device.
*
OFFICIAL CYANFOX THREAD
Cyan Fox is a light-weight Android 4.4.2 custom ROM, which is based on AOSP/Android (4.4.2) and CyanogenMod (11) source bases.
Supported devices:
- 70+ devices
CURRENTLY EVERYTHING IS WORKING PERFECTLY.PLEASE REPORT BUGS AND WHAT ALL ISNT WOKRING.
*MEOW KERNEL WORKS WITH THIS ROM :good:CyanFox features:
- Dark UI mode
- Paranoid Halo notifications
- Screen Recording
- NavBar settings and native enabling
Features in progress:
- Unread notifications count-icons with new 4.4 API for any app/launcher
- Apps sidebar-launcher
- Advanced Recent Apps RAM bar
- Multi-color/alpha status/nav bars
- Network speed indicator in status bar
- List view animations
- More new features coming soon... UNLOCK BOOTLOADER IS A PRE REQUISITE FOR THIS ROM AS IT NEEDS FLASHING A CUSTOM KERNEL
PROCEED AT YOUR OWN RISK,CYANFOX TEAM SHALL NOT BE RESPONSIBLE FOR BRICKED DEVICES AND UNWANTED DATA LOSSES.HOWEVER,FULL SUPPORT IS PROVIDED AND ALWAYS WILL BE PROVIDED
INSTALLATION:-
*DOWNLOAD ROM AND LATEST GApps
*move them to sdcard
*TO AVOID RECOVERY ISSUES, PLEASE PUT YOUR DEVICE INTO FASTBOOT AND FASTBOOT BOOT IMG
fastboot flash boot boot.img
Click to expand...
Click to collapse
*LOAD RECOVERY BY PRESSING VOL UP/DOWN DURING BOOT
*WIPE DATA /FACTORY RESET
*FLASH BOTH ZIPS
*ENJOY :laugh:DOWNLOADS: CYAnfox-rom.com/downloads/
GOOGLE+ : https://plus.google.com/communities/103538505102439103284
https://github.com/CyanFox
https://github.com/CyanogenMod/andro...cm-1110/kernel
Email us at: [email protected]
Download at http://www.cyanfox-rom.com/downloads/
Please submit bugs to: https://code.google.com/p/cyanfox/issues/list
And feature requests to: http://cyanfox.uservoice.com/forums/220748-general
Help us out!
http://forum.xda-developers.com/dona....php?u=5302565
Credits to:
Mantas Zilius [MNT]
XDA:DevDB Information
CYANFOX, a ROM for the Sony Xperia Z
Contributors
Aka91, cyanfox developers
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: UNLOCKED BOOTLOADER, ROOT , RECOVERY
Based On: CYANOGENMOD
Version Information
Status: Testing
Current Beta Version: CYANFOX 2.0.2 EXPERI
Beta Release Date: 2013-12-19
Created 2014-01-16
Last Updated 2014-01-18
Reserved
Screenies will be uploaded soon!
Aka91 said:
Screenies will be uploaded soon!
Click to expand...
Click to collapse
Hi my friend! Just downloaded the latest 2.0.2 version but it fails flashing! I've tried several times but there should be an issue in the updater binary. Would you pls. look into it?
Thanks a million! :fingers-crossed:
ItalDiamond2008 said:
Hi my friend! Just downloaded the latest 2.0.2 version but it fails flashing! I've tried several times but there should be an issue in the updater binary. Would you pls. look into it?
Thanks a million! :fingers-crossed:
Click to expand...
Click to collapse
It must be a bad download or bad zip...
Try downlaoding again..clear data and then flash!
Sent from my C6603 using XDA Premium 4 mobile app
Aka91 said:
It must be a bad download or bad zip...
Try downlaoding again..clear data and then flash!
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi pal, I've tried to download it a couple of times with the same results! This is not my first time I flash a custom rom you know. Very weird? :crying: Pls. advise.
ItalDiamond2008 said:
Hi pal, I've tried to download it a couple of times with the same results! This is not my first time I flash a custom rom you know. Very weird? :crying: Pls. advise.
Click to expand...
Click to collapse
I am sure there is no problem with the binary..recovery is the iasue...
Flash the boot.img on fastboot by
FASTBOOT FLASH BOOT BOOT.IMG
Click to expand...
Click to collapse
Aka91 said:
I am sure there is no problem with the binary..recovery is the iasue...
Flash the boot.img on fastboot by
FASTBOOT FLASH BOOT BOOT.IMG
It worked like a charm! Thank you my friend!:victory:
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I've been following the cyanfox progress on Google+ and it's a rock solid ROM.
Weekly builds and nightlys coming soon too
Sent from my C6603 using XDA Premium 4 mobile app
golfgtiedition30 said:
I've been following the cyanfox progress on Google+ and it's a rock solid ROM.
Weekly builds and nightlys coming soon too
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah..it is the smoothest yet..i hav tried so many of them..but this has great feature list.
The OP willcbe updated with latest features!
Latest Gapps are for 4.3, are they good for this rom?
Does this have the listview scrolling animations and active display?
Do I need unlocked bootloader for this?
U should UB
@lepi use latest cm11 gapss! @tiskewlio those are yet to be implemented @hafini and @binh_hdda you guys need unlocked bootloader!
I'm curious on how CyanFox performs in term of battery life. Anyone care to enlighten me?
kingrion88 said:
I'm curious on how CyanFox performs in term of battery life. Anyone care to enlighten me?
Click to expand...
Click to collapse
It performs decently but im experiencing issues where android os is keeping my phone awake
Techpenguin5 said:
It performs decently but im experiencing issues where android os is keeping my phone awake
Click to expand...
Click to collapse
that is the problem with manly all 2.0.2 users
will be fixed in the next build!
remember..these are early builds...we want your support in tracking the bugs!
:cheers:
Aka91 said:
that is the problem with manly all 2.0.2 users
will be fixed in the next build!
remember..these are early builds...we want your support in tracking the bugs!
:cheers:
Click to expand...
Click to collapse
I hope so as im very certain this is related to the new 4.3 blobs being implemented as i was having this same issue on stock firmware 4.3 and it still hasnt been fixed
Techpenguin5 said:
I hope so as im very certain this is related to the new 4.3 blobs being implemented as i was having this same issue on stock firmware 4.3 and it still hasnt been fixed
Click to expand...
Click to collapse
i never ran stock 4.3
i am currently downloading the UK GENERIC right nw!
will check for a full battery runtime and post screenies..(am talking about the STOCK ROM)!
:good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Liquid0624
Deadman96385
jsnweitzel
Somber73
TheBr0ken
CPA-Poke
Cdub50
Code:
Linaro 4.9 GCC Toolchain
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimaztions
Slims DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slims QuickSettings
Halo (Renamed to bubble in settings)
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working wifi Tethering
Cell Broadcasts
Slims Configurable Power Menu
Slims Configurable Nav Bar
Custom animation controls (Listview)
LockScreen Notifications
And way more than this...
Code:
[url="http://pastebin.com/WNTJMS6k"]LiquidSmooth v3.0 Full list of features[/URL]
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
Code:
[url="http://www.drdevs.com/devs/teamliquid/Nightly/Xperia%20Z%20Tablet%20GSM/"]Pollux Download[/URL]
[url="http://www.drdevs.com/devs/teamliquid/Nightly/Xperia%20Z%20Tablet%20Wifi/"]Pollux_Windy Download [/URL]
[url="http://www.drdevs.com/devs/teamliquid/Gapps/"]Slim AIO Gapps Download[/URL]
Please Support Liquid by Donating HERE
XDA:DevDB Information
[ROM] [4.4.2] [OFFICIAL] LiquidSmooth v3.0 Beta, a ROM for the Sony Xperia Tablet Z
Contributors
deadman96385
Version Information
Status: Testing
Created 2014-03-06
Last Updated 2014-03-09
This is a stable beta build for the Xperia Tablet Z.
Bugs:
No confirmation that Theme has been applied, requires reboot to see the theme
Pie needs a reboot to show up
Click to expand...
Click to collapse
Xperia Tablet Z specific bugs:
Boot Animation is not sized properly
Click to expand...
Click to collapse
Mine just in case
Hey deadman96385,
will try ur pollux_windy build tomorrow.
my build wont install through TWRecovery ... today i did a fresh build ... again installation aborted.
i ftf flashed back to stock to get rid of my fotakernel TWRecovery and tried to install my build through
cwm ... installation was ok but it wont boot.
so lets see if ur build is usable.
btw i can test the whole stuff for u and sen u some logs and error reports ef u like!
Greetings and thanks for ur help in the last days!
c0llal0 said:
Hey deadman96385,
will try ur pollux_windy build tomorrow.
my build wont install through TWRecovery ... today i did a fresh build ... again installation aborted.
i ftf flashed back to stock to get rid of my fotakernel TWRecovery and tried to install my build through
cwm ... installation was ok but it wont boot.
so lets see if ur build is usable.
btw i can test the whole stuff for u and sen u some logs and error reports ef u like!
Greetings and thanks for ur help in the last days!
Click to expand...
Click to collapse
There our three methods (That may work) to try if it does not want to flash in twrp they our
1. Unmount system then flash
2. Factory Reset, reboot to recovery again then flash
3. Flash CWM and in this case try flashing a alt kernel
Edit: Windy is up
deadman96385 said:
There our three methods (That may work) to try if it does not want to flash in twrp they our
1. Unmount system then flash
2. Factory Reset, reboot to recovery again then flash
3. Flash CWM and in this case try flashing a alt kernel
Edit: Windy is up
Click to expand...
Click to collapse
Seen ... downloaded and tested ...
same bug with ur build ... i get bootloops ... it wont come pass sony logo.
can anybody confirm this or is something different broken over here???
need some sleep now
c0llal0 said:
Seen ... downloaded and tested ...
same bug with ur build ... i get bootloops ... it wont come pass sony logo.
can anybody confirm this or is something different broken over here???
need some sleep now
Click to expand...
Click to collapse
You sure none of those methods worked?
Need to try third method.
I need some sleep first got to be at work in about 7 hours.
But first and second method left me behind with the same bugs i had with my build.
Sent from my C6603 using XDA Premium 4 mobile app
I give up for now ... no chance to mek it boot over here!
maybe the fault sits in front of the tablet, don't know ...
anybody else tested to install liquidsmooth???
any feedback for deadman??? come on ...
Edit:
Going back to stock rom and try to flash again.
It must be something wrong over here, i even can't
get omni to install.
Im following u guyz on G+ nice
So cool to see liquidsmooth spreading all over xperia models...i luv this rom on Yuga and will give a shot a bit later on tonite with my polluxwindy.
So cool thank u sir!
Whenever u need testerz pm me.
Tapatalked with my Yuga
c0llal0 said:
I give up for now ... no chance to mek it boot over here!
maybe the fault sits in front of the tablet, don't know ...
anybody else tested to install liquidsmooth???
any feedback for deadman??? come on ...
Edit:
Going back to stock rom and try to flash again.
It must be something wrong over here, i even can't
get omni to install.
Click to expand...
Click to collapse
Installed with no problem using TWRP 2.6.3.0 :good:
Backed up using TWRP (Was running PAC ROM android 4.3)
Factory wipe, + wipe Dalvik & cache to be sure.
Flashed LiquidSmooth
Wipe Dalvik & cache again - just incase
Reboot - no problem - running LiquidSmooth
I'm now going to flash the provided Slim Gapps zip. Will report back if there's a problem
Testing beta
I will flash this rom also once i'm off work. Thanks for bringing this to the tab Z!
I am curious about this rom. Does it have double tap to wake?
Not yet or i didnt see where to activate it...but double tap status bar to sleep yes :angel:
SplitView aka multiwindow is working perfect...only Pie; i had to reboot to get it work.
And getting some fc's here and there...will bring back logcats tomorrow
GretaLewd said:
Installed with no problem using TWRP 2.6.3.0 :good:
Backed up using TWRP (Was running PAC ROM android 4.3)
Factory wipe, + wipe Dalvik & cache to be sure.
Flashed LiquidSmooth
Wipe Dalvik & cache again - just incase
Reboot - no problem - running LiquidSmooth
I'm now going to flash the provided Slim Gapps zip. Will report back if there's a problem
Click to expand...
Click to collapse
Thanks for that, but i know how To .... Important for me is the information that it works because for me it always ends up in bootloops ... wether lsrom or omni ....
I got some serious trouble over here. Need to flash some older stock Rom than 4.3 and try again. God damn it
Sent from my C6603 using XDA Premium 4 mobile app
Is tape2wake feature implemented?
lupick said:
Is tape2wake feature implemented?
Click to expand...
Click to collapse
How about looking 2 posts before?
So far this ROM is working excellent on Pollux in Dalvik.
Been using for two days for a total of around 24 hours and not had a single major problem. Very impressed its the slickest ROM I have used yet on 4.4.
I was using cm11 fidelity, then got a random reboot halfway through a game and got stuck in bootloop so thought I'd give this a try.
For anyone having issues, I had flashed cm11 fidelity inc mods then booted into CWM, didn't reflash kernel from laptop (no access at minute) just factory reset and wiped cache and dalvik cache.
Not major but once orr twice on MX player had the common sound bug, where the sound seems to stall for half a second, didn't have this on fidelity but had it on every other 4.4 ROM. One other issue is if you get a notification with headphones in, it still plays through loudspeakers too.
Very well done with this ROM guys thank you.
I dirty flashed it and i dont know why people says to modify first post i got it first try and apparently im not the one...
Well, someone else having trouble to mount SD?
I tried then a clean install and same thing, and also tried it with omni kernel...same thing, also no sd access from rom.
Tapatalked with my Yuga
Could someone please test this new boot animation it is sized for this tablet, it is not flashable you will need to manually replace it, rename the 2560.zip to bootanimation.zip
Download Link: https://www.dropbox.com/sh/1h0mp8ekusdz1b9/5VRu5mD9VN/2560.zip
AOSPA 6.0.1 for the Xperia Z3 Tablet Compact!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Instructions
If installing fresh and/or coming from another ROM (including previous PA versions)
Reboot into Recovery (Please use the latest TWRP) and MAKE A BACKUP!
Wipe System, Data, Cache, and Dalvik Cache
Flash Latest OFFICIAL STOCK ROM - This will ensure a clean system and all bootloader etc updated to latest.
Wipe System, Data, Cache, and Dalvik Cache
Flash the ROM
Flash GApps
Flash SuperSU (if you want to have root, that is)
Wipe Caches and Reboot
Profit!
Download Links
Scorpion LTE: http://get.aospa.co/official/scorpion
Scorpion_Windy WiFi Only: http://get.aospa.co/official/scorpion_windy
AOSPA Links
Google+: https://plus.google.com/communities/112514149478109338346
Gerrit: http://gerrit.aospa.co/
GitHub: https://github.com/AOSPA
#StayParanoid
XDA:DevDB Information
Paranoid Android 6.0.x, ROM for the Sony Xperia Z3 Tablet Compact
Contributors
tomgus1, sonyxperiadev, PA Team
Source Code: https://github.com/AOSPA/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSPA
Version Information
Status: Stable
Created 2016-08-08
Last Updated 2016-08-11
Reserved
Successfully flash it on my SPG21 via TWRP
Problem :
sim not detected (no imei)
camera cant capture anything
Any solution
These are common known problems that PA is working on. A fix is expected in a next release of the rom.
I guess those issues should be mentionned in the Rom description.
Sorry I cannot help.
REundo said:
Successfully flash it on my SPG21 via TWRP
Problem :
sim not detected (no imei)
camera cant capture anything
Any solution
Click to expand...
Click to collapse
SIM will be fixed in the next release. This was due to missing modem blobs but these have now been added and will be present in the next release.
Camera: Can you please try different resolutions and maybe a different camera app. I don't personally own a Z3 Tablet so can't fully check for this device.
Finally unlocked and flashed a custom rom on my new tablet.
Great to be back to bare android, the bloat was really getting a P in the A :angel:
Still getting the hang of flashing on xperia, as i'm used to samsung and nexus devices.
But i think i got it right this time, all seems to be running smooth.
Thank you very much.
REundo said:
Successfully flash it on my SPG21 via TWRP
Problem :
sim not detected (no imei)
camera cant capture anything
Any solution
Click to expand...
Click to collapse
Until a fix gets released you can try this xposed module that allows you to edit your imei: http://forum.xda-developers.com/xposed/modules/hijack-suite-t3429770
Best is probably to put your own imei that should be on your phone box. I hope it will make your phone useable in the meantime.
anyone else has sd card corruption? aftery every reboot the external sd is corrupted. on stock rom and cm12.1 it is working fine.
when i flash the lastest rom,TWRP warns my SGP621 is z3 rather than Scorpion and flashing failed.The TWRP works well when i flash cm and stock rom.
I don't know why the error happened。
Please help me,thanks
[/COLOR]
hot12232s said:
when i flash the lastest rom,TWRP warns my SGP621 is z3 rather than Scorpion and flashing failed.The TWRP works well when i flash cm and stock rom.
I don't know why the error happened。
Please help me,thanks
Click to expand...
Click to collapse
It caused by flashing the wrong recovery img. Happend to me once when the TWRP warns my SPG21 as a Scorpion_windy and failed to flash the PA scorpion. Solve by flashing the correct twrp img. U can find it here http://forum.xda-developers.com/crossdevice-dev/sony/twrp-v2-8-6-0-f2fs-z1-z1c-z2-z3-z3c-t3098573 or here https://www.androidfilehost.com/?fid=4996503000517182028
---------- Post added at 12:34 PM ---------- Previous post was at 12:07 PM ----------
augustinleman said:
Until a fix gets released you can try this xposed module that allows you to edit your imei: http://forum.xda-developers.com/xposed/modules/hijack-suite-t3429770
Best is probably to put your own imei that should be on your phone box. I hope it will make your phone useable in the meantime.
Click to expand...
Click to collapse
Tried it but not working. Hijack suite detect my imei as null, i assume imei can't be edited if the imei didn't exist right and yep i tried put my own imei and few random imei. reboot a few times and no miracles happend. I glad i tried tho Thanks!
---------- Post added at 12:41 PM ---------- Previous post was at 12:34 PM ----------
tomgus1 said:
SIM will be fixed in the next release. This was due to missing modem blobs but these have now been added and will be present in the next release.
Camera: Can you please try different resolutions and maybe a different camera app. I don't personally own a Z3 Tablet so can't fully check for this device.
Click to expand...
Click to collapse
I tried few camera app like ProShot & Better Camera. Both app works well like auto focus, zoom... but it can't save the captured images. i guess it can't access the storage media ??
ps: i have rewrote these replies because accidentally mess up delete all replies (sorry if u got multiple emails)
Where/What is the " OFFICIAL STOCK ROM" mentioned in the previous step? I haven't installed TWRP on my device yet because I was waiting for a 6+ ROM like this one, so I'll be coming from 100% stock. Does it refer to a stock Sony ROM that's flashed?
sh0nuff said:
Where/What is the " OFFICIAL STOCK ROM" mentioned in the previous step? I haven't installed TWRP on my device yet because I was waiting for a 6+ ROM like this one, so I'll be coming from 100% stock. Does it refer to a stock Sony ROM that's flashed?
Click to expand...
Click to collapse
Yeah, Official Stock is Sony Stock ROM
tomgus1 said:
AOSPA 6.0.1 for the Xperia Z3 Tablet Compact!
Instructions
If installing fresh and/or coming from another ROM (including previous PA versions)
Reboot into Recovery (Please use the latest TWRP) and MAKE A BACKUP!
Wipe System, Data, Cache, and Dalvik Cache
Flash Latest OFFICIAL STOCK ROM - This will ensure a clean system and all bootloader etc updated to latest.
Wipe System, Data, Cache, and Dalvik Cache
Flash the ROM
Flash GApps
Flash SuperSU (if you want to have root, that is)
Wipe Caches and Reboot
Profit!
Download Links
Scorpion LTE: http://get.aospa.co/official/scorpion
Scorpion_Windy WiFi Only: http://get.aospa.co/official/scorpion_windy
AOSPA Links
Google+: https://plus.google.com/communities/112514149478109338346
Gerrit: http://gerrit.aospa.co/
GitHub: https://github.com/AOSPA
#StayParanoid
XDA:DevDB Information
Paranoid Android 6.0.x, ROM for the Sony Xperia Z3 Tablet Compact
Contributors
tomgus1, sonyxperiadev, PA Team
Source Code: https://github.com/AOSPA/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSPA
Version Information
Status: Stable
Created 2016-08-08
Last Updated 2016-08-11
Click to expand...
Click to collapse
+Tim Graham for Z3 Tablet Compact we need this commit for camera to work https://github.com/sonyxperiadev/de...mmit/16753458e20ea7b55bcb2e9333465f5e1310c530
tomgus1 said:
Yeah, Official Stock is Sony Stock ROM
Click to expand...
Click to collapse
Perfect, that's what I figured
nos1609 said:
+Tim Graham for Z3 Tablet Compact we need this commit for camera to work https://github.com/sonyxperiadev/de...mmit/16753458e20ea7b55bcb2e9333465f5e1310c530
Click to expand...
Click to collapse
Yep, thanks for the quote, I read this guide, I wanted to confirm that the ROM was 6.0.1 stock, as the Scorpion LTE ROM looks scarily small at ~350mb. Cheers.
sh0nuff said:
Perfect, that's what I figured
Yep, thanks for the quote, I read this guide, I wanted to confirm that the ROM was 6.0.1 stock, as the Scorpion LTE ROM looks scarily small at ~350mb. Cheers.
Click to expand...
Click to collapse
This is largely due to there being the bare minimum of apps pre-installed. You'll want to install a Gapps package from here for access to Google Play etc.
Can you guys add a recovery to the rom? It's such a pain in the ass to first flash another kernel, boot recovery, flash your stuff and reflash the kernel again. It's even worse when something goes wrong.
ckyy said:
Can you guys add a recovery to the rom? It's such a pain in the ass to first flash another kernel, boot recovery, flash your stuff and reflash the kernel again. It's even worse when something goes wrong.
Click to expand...
Click to collapse
Yes, that would be really great if not to difficult.
But no issue if not, love the rom!
tomgus1 said:
This is largely due to there being the bare minimum of apps pre-installed. You'll want to install a Gapps package from here for access to Google Play etc.
Click to expand...
Click to collapse
Great! I had that bookmarked from when I did my Nexus 6p..
Is there a good place to find the latest stock ROM thats TWRP flashable?? I haven't been able to find anything more recent than 5.1.1 in all the root threads.
Edit: NM, found it here.
Can anyone help me with finding a flashable root zip file? don't know where to look for it :angel: thanks in advance
krissztyoon said:
Can anyone help me with finding a flashable root zip file? don't know where to look for it :angel: thanks in advance
Click to expand...
Click to collapse
The method is described there: http://forum.xda-developers.com/z3-...torial-stock-android-marshmallow-6-0-t3409486
At the end of post #1 there is a link where you can download the latest Sony rooted stock file.