Database Develop

BootLoop and now Nothing

Hay guys
Heres the deal
I used flashtool 0.9.13.0 and flashed the UK .244 C6603 on my Xperia Z
Then using the method in Excelsus_Z_V5.5.7 to change the kernel to the .423
After words I used the Root tool DoomLord Ver18 to root the device and then the TWRP till now all is GOOD
When I flashed the ROM the Recovery gave an error mid way through the setup
So when I restarted the device I got stuck
Now I have the Sony logo all the time
I can't even go to flash mode to reFlash a stock TFT
Please Help.....

Fastbootmode? Volum up & plug in usb
---------- Post added at 03:57 PM ---------- Previous post was at 03:56 PM ----------
Do you tryed to flash back to stock rom with flashtool or SUS?

gripfly said:
Fastbootmode? Volum up & plug in usb
---------- Post added at 03:57 PM ---------- Previous post was at 03:56 PM ----------
Do you tryed to flash back to stock rom with flashtool or SUS?
Click to expand...
Click to collapse
I cant get into flash mode
it keeps rebooting
and at best I get a blank screen with a red LED

sshashlan said:
I cant get into flash mode
it keeps rebooting
and at best I get a blank screen with a red LED
Click to expand...
Click to collapse
vul up + power will restart your phone, keep it pressed both for more than 10 sec and it will shutdown your phone hardwarely! then you can go to flashmode, fastboot and etc.

sijav said:
vul up + power will restart your phone, keep it pressed both for more than 10 sec and it will shutdown your phone hardwarely! then you can go to flashmode, fastboot and etc.
Click to expand...
Click to collapse
NO nothing
the phone goes OFF but when I connect the USB the RED LED comes UP and NO Flash Mode

sshashlan said:
NO nothing
the phone goes OFF but when I connect the USB the RED LED comes UP and NO Flash Mode
Click to expand...
Click to collapse
I'm not sure if you doing this the right way,
1. you must hold down the vul down
2. and then connect the USB!
3. make sure your drivers are installed and your pc find your phone!

sijav said:
I'm not sure if you doing this the right way,
1. you must hold down the vul down
2. and then connect the USB!
3. make sure your drivers are installed and your pc find your phone!
Click to expand...
Click to collapse
Nop
I know how to do this
I tried to do it more than once by pressing the Vol Down for the flash mode and/or Vol UP for the fastboot mode
yet NOTHING ;(

sshashlan said:
I cant get into flash mode
it keeps rebooting
and at best I get a blank screen with a red LED
Click to expand...
Click to collapse
For fastboot mode you dont need flashmode..
Open flashtool
Klick on fastbootmode
Connect phone with holding volume up button
What happens now?

gripfly said:
For fastboot mode you dont need flashmode..
Open flashtool
Klick on fastbootmode
Connect phone with holding volume up button
What happens now?
Click to expand...
Click to collapse
I m getting the same thing with the red LED
on Flashtool LOG
04/047/2013 16:47:08 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/049/2013 16:49:32 - INFO - Device disconnected
04/049/2013 18:49:06 - INFO - Device connected with USB debugging off
04/049/2013 18:49:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/051/2013 18:51:22 - INFO - Device disconnected
it stays blank for some time and it comes back up with the Sony logo and back with the LOOP

sshashlan said:
NO nothing
the phone goes OFF but when I connect the USB the RED LED comes UP and NO Flash Mode
Click to expand...
Click to collapse
Only Off and no restart??
EDIT:
http://forum.xda-developers.com/showthread.php?t=2229250
give a look at this thread, If you need your phone quckly. Now I don't have more time for next hours.

gripfly said:
Only Off and no restart??
EDIT:
http://forum.xda-developers.com/showthread.php?t=2229250
Give a look at this thread, If you need your phone quickly. Now I don't have more time for next hours.
Click to expand...
Click to collapse
Man Thank you So Much
It appears I had a soft Break
but this link saved Me
All OF YOU
THANK YOU

sshashlan said:
Man Thank you So Much
It appears I had a soft Break
but this link saved Me
All OF YOU
THANK YOU
Click to expand...
Click to collapse
You're welcome

Unlock bootloader on 133?

So I just downgraded from Emui 3 to 133 and I want to know if the bootloader is unlocked. If not, does anyone know How to unlock it? Thanks in advance
Enviado desde mi SM-T320 usando XDA Premium HD app

To checking it just boot into bootloader mode. Turn off device. Connect to PC by USB cable and press and hold Power + Vol(-).
Sent from my HUAWEI P7-L10

Ziolek67 said:
To checking it just boot into bootloader mode. Turn off device. Connect to PC by USB cable and press and hold Power + Vol(-).
Sent from my HUAWEI P7-L10
Click to expand...
Click to collapse
i think that wrong .. you need to just hold vol. down and connect usb to go to bootloader.. and to recovery hold vol. up and connect usb

mrcs64 said:
you are right. but it works on powered off device?
Click to expand...
Click to collapse
only powered off ...
when i wanna flash something I always power phone off then i have ready cable in laptop then am holding desired vol + or - btn and just plug usb to the phone ...

vol +and vol - plus usb cable will do the same as 3Button method... auto update from stock recovery... vol- plus usb cable goes to fastboot and vol+ and usb cable goes to stock recovery...
How to check if your bootloader is unlocked:
-Open a cmd console
-Type: adb reboot-bootloader
-Type: fastboot oem get-bootinfo
-Done

There is usually more than one way to do something, just because some one does it slightly differently from you doesn't make them wrong or make you right...you are both wrong and both right...
Seriously guys...please stop the arguing and name calling!

help to recover Z1 from hard brick

my z1 doesn't boot or charging
this happened after flashing a custom rom
can i recover it ??
what should i find a replacment for the motherboard ?
sorry for my bad english
hope to find any one to help

Steliyos said:
my z1 doesn't boot or charging
this happened after flashing a custom rom
can i recover it ??
what should i find a replacment for the motherboard ?
sorry for my bad english
hope to find any one to help
Click to expand...
Click to collapse
post stat of your phone -->
1. flashmode & fastboot working?
2. LED when power key is pressed?
3. what rom you flashed?

DectonX said:
post stat of your phone -->
1. flashmode & fastboot working?
2. LED when power key is pressed?
3. what rom you flashed?
Click to expand...
Click to collapse
none of them is working
led isn't working too
DU10.5

yes you can fix your hard brik xperia z1
Steliyos said:
my z1 doesn't boot or charging
this happened after flashing a custom rom
can i recover it ??
what should i find a replacment for the motherboard ?
sorry for my bad english
hope to find any one to help
Click to expand...
Click to collapse
i was facing the same problem with my z1 c6902
only red led while charging
no sony logo
no fastboot mode
pc recognize it in flash mode
how i solved it?
i used xperia companion,
connect your z1 with pc
select repair software
follow the instructions you'll get yur z1 unbricked

vjluvanee said:
i was facing the same problem with my z1 c6902
only red led while charging
no sony logo
no fastboot mode
pc recognize it in flash mode
how i solved it?
i used xperia companion,
connect your z1 with pc
select repair software
follow the instructions you'll get yur z1 unbricked
Click to expand...
Click to collapse
ok the device is seen by the computer but it doesn't boot to download mode
when i connect it shows that there is a device connected to the computer but it's shown as it's a usb input device
can u help me with this?

Have you installed drivers!
---------- Post added at 08:42 PM ---------- Previous post was at 08:40 PM ----------
Steliyos said:
ok the device is seen by the computer but it doesn't boot to download mode
when i connect it shows that there is a device connected to the computer but it's shown as it's a usb input device
can u help me with this?
Click to expand...
Click to collapse
Drivers are installed?
Which os u r using?

vjluvanee said:
Have you installed drivers!
---------- Post added at 08:42 PM ---------- Previous post was at 08:40 PM ----------
Drivers are installed?
Which os u r using?
Click to expand...
Click to collapse
yes of course it's
windows 10 -64 bit

If PC recognizes your phone, can you use that to boot into fastboot mode?
Either use adb command "adb reboot fastboot" in PC
Or press and hold VOLUME_UP button then connect your phone to PC via USB (should see blue LED)

P9 Hard Bricked - No recovery, no fastboot

Hi,
First i'm sorry for my bad english.
I've a P9, and i tried to update to Nougat. But something went wrong, and now, i can't boot my phone, no recovery no fastboot. When i plug it on my pc, my phone is recognize as "USB SER". How to unbricked ?

Hold volume down + power for 15 seconds, hold it even longer to try to get into fastboot mode. Was the battery low? Maybe you need to charge the phone up.

My phone is charged.
I tried your solution, but didn't work..

theoh88 said:
My phone is charged.
I tried your solution, but didn't work..
Click to expand...
Click to collapse
Put rescue firmware in dload folder in sd card and boot and hold power + and -...

rayman95 said:
Put rescue firmware in dload folder in sd card and boot and hold power + and -...
Click to expand...
Click to collapse
It only boots to fastboot from adb shell or if i plug it in my computer and hold vol down + power if i dont plug it in it will not boot into fastboot.

I don't have access to fastboot or recovery. I have black screen, when i try all combinations. When it's plugged, it's only recognized as " USB SER "

theoh88 said:
I don't have access to fastboot or recovery. I have black screen, when i try all combinations. When it's plugged, it's only recognized as " USB SER "
Click to expand...
Click to collapse
Even with Pwr + - buttons hold for 5 or 10 secs????

rayman95 said:
Even with Pwr + - buttons hold for 5 or 10 secs????
Click to expand...
Click to collapse
Yes, nothing happens

Hold Vol Down while inserting a USB cable connected to your computer, assuming you have one.

Yes, i have a computer. I tried to insert usb cable with vol down, but my phone is always recognized as USB SER

theoh88 said:
Yes, i have a computer. I tried to insert usb cable with vol down, but my phone is always recognized as USB SER
Click to expand...
Click to collapse
Hey mate, did you find a solution, same thing happened to me ... the only thing I get from the phone is "USB SER" ... never unlocked, rooted or flashed my phone. Could be a hardware failure?

AneirinIV said:
Hey mate, did you find a solution, same thing happened to me ... the only thing I get from the phone is "USB SER" ... never unlocked, rooted or flashed my phone. Could be a hardware failure?
Click to expand...
Click to collapse
No, i found nothing...

How did you try to update to nougat? Can you boot into erecovery?

theoh88 said:
Hi,
First i'm sorry for my bad english.
I've a P9, and i tried to update to Nougat. But something went wrong, and now, i can't boot my phone, no recovery no fastboot. When i plug it on my pc, my phone is recognize as "USB SER". How to unbricked ?
Click to expand...
Click to collapse
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial

zgfg said:
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
I already tried DC phoenix, but my phone isn't recognized so i can't use it

Hi,
After hours of search, i found a python program for honor 4C. This program can communicate with p9 with usb serial port. So, i got Linux on my pc, tried to be familiar with python.
Now, i need some information:
startframe
headframe
bootheadaddress
bootdownloadaddress
If guys can give me this information or tell me where to find them, please leave reply !

My phone is the same with yours. Waiting for good news from you. Try this solution, i dont have this tool.

Could somebody find firmware with testpoint for eva-l09 ?

Hey mate I managed to revive my phone ... it had to be something hardware related. I opened it up, disconnected the battery cable for a couple of minutes, reconnected and re-screwed everything and it turned on. I didn't even lose any data.

Same trouble
Hi every body 'im so sorry for my english, i'm french...
Could some one please help me, i've tryed to restore a mate 10 pro who as in demo mode but i made a mistake with a "update.zip" file and now the phone is always off, no fastboot or recovry mode, the phone stay off when i press the power bouton. when i plug the USB cable, it appear "USB SER" only.
Thanks for your attention

i dont have download mode ???

strange thing!!!
i try to turn off my note 9 exynos then press power+bixby+volume down together but it dont get to download mode but only bootloop till i release the buttons why?
i didn able to get to download mode with the usb hold the bixby and volume down then plug the usb and it did go to download mode
is my phone not good ?

bubu23 said:
strange thing!!!
i try to turn off my note 9 exynos then press power+bixby+volume down together but it dont get to download mode but only bootloop till i release the buttons why?
i didn able to get to download mode with the usb hold the bixby and volume down then plug the usb and it did go to download mode
is my phone not good ?
Click to expand...
Click to collapse
Why would you wanna go into download-mode?
No: your phone is NOT defective, only there's a new procedure to get your phone in download-mode:
https://forum.xda-developers.com/showpost.php?p=77250579&postcount=1

henklbr said:
Why would you wanna go into download-mode?
No: your phone is NOT defective, only there's a new procedure to get your phone in download-mode:
https://forum.xda-developers.com/showpost.php?p=77250579&postcount=1
Click to expand...
Click to collapse
just wanted to check my bootloader so wanted to go to download mode and in youtube people show just to hold the three combine keys but not working for me

bubu23 said:
just wanted to check my bootloader so wanted to go to download mode and in youtube people show just to hold the three combine keys but not working for me
Click to expand...
Click to collapse
If that's not working,can't you use the ADB command adb reboot bootloader ?

KOLIOSIS said:
If that's not working,can't you use the ADB command adb reboot bootloader ?
Click to expand...
Click to collapse
no my friend it works via usb i say that befor and as i see every body say to get to download mode with usb they call it the new methud dont know why lolll

bubu23 said:
no my friend it works via usb i say that befor and as i see every body say to get to download mode with usb they call it the new methud dont know why lolll
Click to expand...
Click to collapse
OK,how about booting to recovery using this (then use the recovery menu to go to bootloader mode):
https://www.hardreset.info/devices/samsung/samsung-galaxy-note-9/recovery-mode/

KOLIOSIS said:
OK,how about booting to recovery using this (then use the recovery menu to go to bootloader mode):
https://www.hardreset.info/devices/samsung/samsung-galaxy-note-9/recovery-mode/
Click to expand...
Click to collapse
nope i try this before and try to get to bootloader like this but it just start my phone regular lollll i can get to bootloader only with usb why??

bubu23 said:
nope i try this before and try to get to bootloader like this but it just start my phone regular lollll i can get to bootloader only with usb why??
Click to expand...
Click to collapse
I can get to it via recovery on my Note 9,I have no explanation as to why you're having issues.
Perhaps try the method given in post #2 of this thread.

New method now for Note 9 download mode. Power off, hold Bixby+Vol Down and connect USB cable to PC to trigger it.

Can't boot into download mode too....
Australia ver....

shirakani said:
New method now for Note 9 download mode. Power off, hold Bixby+Vol Down and connect USB cable to PC to trigger it.
Click to expand...
Click to collapse
Yip, this works...but tricky combo to hold down Bixby and Vol Down while plugging into USB power...I almost took my device in for fixing because I just could't for the life of me boot into Download mode after encountering the dreaded custom binary error on trying to boot up...