[Q] Problem with startup screen, what with this? - Galaxy S III Mini Q&A, Help & Troubleshooting

Hi
I try flash mobile with firmware Lollipop 5.0.2 (CyanogenMod 12.0) from http://novafusion.pl/downloads/
Flash process was a corrupted with error message.
When I then want flash I have problem go to boot menu, but finally I flash to original firmware who was modified by brand operator. But this change disappear on flash mobile.
When I start (restart) mobile, I have broken screen 10-15 second - show on the picture ( i8190n.jpg)
It is possible do with this?
Exist any repair firmware for i8190n?
Thank you

Dwonload the bootlogo from http://novafusion.pl/downloads/ > Extras > Select your model and flash the Original bootlogo with ODIN.

Hi soralz
When I flash "original-bootlogo-nfc.zip", problem startup screen disappear.
Problem is only logo? not working S3?
Thank you

I have the same problem with my s3.
And now i cant start recovery mode and isnt recognized by a PC..
Im dead.. . i dont fine a solution..
Write me if you have a solution.

Hi
When flash and your phone still reboot and phone was not usable I use some steps.
Get off battery.
Most useful is Vol+ + Home + Power (then write me repair....)
Vol- + Home + Power and then flash via Odin
Best regards

So you have screen with info s3mini but no logo samsung with swirl.
Hmm, try in recovery Restore default setting to get rom without any bugs, after this go to download mode, install non branding stock rom by odin - You dont lose anything without addons from cell operator. After install turn off phone, go to recovery and do clean dalvik and cache and restart phone. Now might work properly.
I have a simillary problem in Dec 2013 when Nova fusion bring firsts cm11 releases. It will help me with this.
Sent from my GT-I8190 using XDA Free mobile app

Related

Downgrade from Cyanogen 9 to Stock ROM.. Flashing Issue!

I'm facing a problem due to flashing my GT-S5830 (ACE)
I tried New release Cyanogen MOD 9 and didn't like it.. (Still many bugs, and FC! >.<)
So I went back to recovery mode in CMW5, and do..
1. Wipe Data+System+Dalvik
2. Restore my backup (Samsung Stock ROM, Gingerbread 2.3.3)
3. Reboot
But, then my ACE stuck in GT-S5830 Screen for a long time, till it's black screen blank.
I've tried the ODIN v4.38, ODin 3 v1.83
Download the ACE Stock package..
Start... And stuck at setup connection line..
Anyone can help me? I need my phone back.. :'(
Biboltz said:
I'm facing a problem due to flashing my GT-S5830 (ACE)
I tried New release Cyanogen MOD 9 and didn't like it.. (Still many bugs, and FC! >.<)
So I went back to recovery mode in CMW5, and do..
1. Wipe Data+System+Dalvik
2. Restore my backup (Samsung Stock ROM, Gingerbread 2.3.3)
3. Reboot
But, then my ACE stuck in GT-S5830 Screen for a long time, till it's black screen blank.
I've tried the ODIN v4.38, ODin 3 v1.83
Download the ACE Stock package..
Start... And stuck at setup connection line..
Anyone can help me? I need my phone back.. :'(
Click to expand...
Click to collapse
try to download and do not perform a backup
if didn't help try force download by :
pull out the battery
hold the power button+home+vol down
then insert the battery while holding " nedd some one assistance"
Biboltz said:
I'm facing a problem due to flashing my GT-S5830 (ACE)
I tried New release Cyanogen MOD 9 and didn't like it.. (Still many bugs, and FC! >.<)
So I went back to recovery mode in CMW5, and do..
1. Wipe Data+System+Dalvik
2. Restore my backup (Samsung Stock ROM, Gingerbread 2.3.3)
3. Reboot
But, then my ACE stuck in GT-S5830 Screen for a long time, till it's black screen blank.
I've tried the ODIN v4.38, ODin 3 v1.83
Download the ACE Stock package..
Start... And stuck at setup connection line..
Anyone can help me? I need my phone back.. :'(
Click to expand...
Click to collapse
Hey
Try removing the battery a couple of minutes, then put it in Download Mode and flash. Run Odin as Administrator.
If it doesn't work, try removing the SIM and SD Card.
If not, try doing it very quickly. I exolain, it seems that if you let the phone connected during a lot of time it won't work with Odin. Put it in Download Mode connect it to the PC and flash.
If it still doesn't work, turn off the Firewall and Antivirus.
Finally, if not, download Odin 4.42:
http://www.mediafire.com/?s5b38cc3qeeaj19
and Odin 4.43:
https://rs305p6.rapidshare.com/files/2608670876/Odin_Multi_Downloader_v4.43.rar
Put the device in Download Mode, and try flashing with Odin 4.42, if it stucks at Setuo connection, close it and open Odin 4.43 and flash.
If not, sorry :
Hit the Thanks button if helped
Sent from my GT-S5830 using xda app-developers app
First u need to enter in recovery menu and wipe data/cache/dalvin
Then flash stock rom
When it's done, MUST enter in recovery menu again and wipe data and cache
Now it's work !
100% :silly:
Only after this flash custom recovery and restore backup !

[Q] Need help with Jelly Bean Rom

Hi,
I have Galaxy Note with 4.0.3 rooted already. I tried to installed the Ultimate JB v5.1 from this thread
http://forum.xda-developers.com/showthread.php?t=1970626
Now I am having a problem. The Philz Touch 3 seems working now, but when I am trying to flash the rom. There is absolutely no progress BAR!
After 5-10 minutes the phone reboot itself. Then the JB rom was not installed. It stuck at a screen displays Installing applications.....
It will be like that forever.
and I can't go back to 4.0.3. I did not backup....
It seems like the OLD ICS is still on my phone but I can not enter the system. It says Installing Applications forever. Then if I connect a usb,
I actually can goto Setting, then I see the phone is still on 4.0.3.
Seems like I only partially wiped out the old ICS? I could not see the internalsd from my PC after connect the USB.
I have also formatted EMMC... am I screwed?
Is there a way to save the phone?
Please help.
Many many thanks
Tony
Are you able to go into download mode? If yes then flash a stock ics through pc odin. This should boot up your phone normally
nokiamodeln91 said:
Are you able to go into download mode? If yes then flash a stock ics through pc odin. This should boot up your phone normally
Click to expand...
Click to collapse
Thanks for replying, I think I am able to Reboot Download from Philz Touch 3. I will certainly try that.
Currently it seems like I still have old system remained in my phone but partially. That might be why I could not boot.
I will try that option.
Thanks
Tony
Yes, there is; your phone boots so all is still well. Download odin, and put your phone into download mode (volume up + home + power; pressed at tge sane time it will automagically reboot and only when you see the galaxy note icon you release these buttons. Now also download a stock pre-rooted GINGERBREAD rom and glash this rom via odin, there will be 3 things to flash; csc, phone and if I remember corrrectly also modem. Now just let it boot and you will be safe again. Now you can experiment again....
hom.hom said:
Yes, there is; your phone boots so all is still well. Download odin, and put your phone into download mode (volume up + home + power; pressed at tge sane time it will automagically reboot and only when you see the galaxy note icon you release these buttons. Now also download a stock pre-rooted GINGERBREAD rom and glash this rom via odin, there will be 3 things to flash; csc, phone and if I remember corrrectly also modem. Now just let it boot and you will be safe again. Now you can experiment again....
Click to expand...
Click to collapse
Thank you so much!. I will try that.:good::good:
Tony

[Q] Dead? Blackscreen without logo N7000 4.0.3

Hi,
I'm a newbie who has a Galaxy Note N7000, 4.0.3 with kernal LQ3.
I wanted to root and install a new room.
I downloaded "PhilZ-cwm6-XXLQ3-OXX-v3.99" and successfully installed it via my microSD-card.
Without booting my phone I by mistake installed "gapps-jb-20130301-signed" and it worked flawless as well, so I thought why not try install the ROM directly as well - without rebooting the phone hence I started the installation of "JellyBeer-v4.32-29062013-101059-n7000". This was made without choosing "wipe data/cache".
Everything seemed to work fine, and it was in the stage "installing".
Without noticing the screen turned black and I got panic and after 20 sec I removed the battery. Now the phone doesn't react on either the power button or recover mode. The screen just continues to stay black. Can see any indication once connected to the charger either....
Can you please help me with advises?
Can you enter the download mode (vol down + home + power). If you can, download one of the stock ROMs from sammobile.com and flash using PC ODIN. This should take you back to the stock ROM after which u can again root using the Philz kernel. And before flashing, please read the instructions carefully. You have to flash the ROM first after a data/cache wipe and then gapps (if needed).
Hi,
It dosen't seem to react to the download mode....
Is it possible to do something by entering the phone's hardware? Remove battery - for cache restore or similar?
Varad297 said:
Can you enter the download mode (vol down + home + power). If you can, download one of the stock ROMs from sammobile.com and flash using PC ODIN. This should take you back to the stock ROM after which u can again root using the Philz kernel. And before flashing, please read the instructions carefully. You have to flash the ROM first after a data/cache wipe and then gapps (if needed).
Click to expand...
Click to collapse

[Q] Boot Reboot [HELP]

This is what i did:
1. Try to change the modem
2. try to zip a new boot image.
Result:
The phone restart over and over again.
The phone do not enter into recovery mode.
The phone restart but the screen keep the last image (the android in download or white screen)
Im trying to download the stock firmware of samsung but ... im a little afraid
any advice?
Are you able to enter download mode?
Sent from my GT-I8190 MaclawStudio Carbon 4.4.2 using Tapatalk
jnicaragua said:
This is what i did:
1. Try to change the modem
2. try to zip a new boot image.
Result:
The phone restart over and over again.
The phone do not enter into recovery mode.
The phone restart but the screen keep the last image (the android in download or white screen)
Im trying to download the stock firmware of samsung but ... im a little afraid
any advice?
Click to expand...
Click to collapse
Dont worry aslong as the device turn on we can fix it flash threeway reccovery from here
Thanks guys
I think the reason was that i try to change the basemod and the modem and the bootloader image ...
The phone went into a hard brick, using a loooot of patience i was able to enter to download mode.
Then I got a Bootloop -_-° (was a long night) using a few tips fron here and there i finally was able to
enter in recovery mode...
Finally i was able to re - root and install twrp and use a my stock backup...
...........
Thanks for those advise and a HUGE thanks to the community. But someone should do a video tutorial of how to unbrick (hard and soft) a s3 mini cuz i just found video about s2 and s3 (and obviously the files arent the same )

how to downgrade gti9070 ddupl8 jellybean

When I downgrade my gti9070 from Indian jb to GB then it stuck at Samsung galaxy s advance named logo and no recovery .plz help and give another way to downgrade it.....:crying:
It should boot into recovery or download mode .
Then only it could work , try if any of the below mentioned steps sort it out for you.
1 : batter pull-up and then waiting 1 min then reinserting and REBOOT.
2: try getting into recovery mode if you are successful then just clean cache/dalvic - REBOOT.
2:try getting into download/ODIN mode and then try re-flashing the stock GB from ODIN(use the specific firmware as provided by manufacture it contains kernel and other information related for I9070) HERE ARE THE ORIGINAL FIRMWARES you`ll need a signup on sammobile to download don`t worry it doesn`t take much time but it will come in handy next time
You can try adb sideload booting GB i think its somewhere in thread just search for it .
BUt you`ll need to boot into recovery first for it to work,
i tried but i cant go to recovery mode
I tried but not access to recovery mode
.sammobile have 4 firmwares I confused what to flash .plz guide me
yadav anand said:
I tried but not access to recovery mode
.sammobile have 4 firmwares I confused what to flash .plz guide me
Click to expand...
Click to collapse
well if you can go to download mode , and want to downgrade to GB , flash the last one.
2015-08-10 India pda I9070DDLD4 csc I9070ODDLD4 .
thnx for reply
Iam new here and a little bit knowledge of flashing.bro you say that I have to flash I9070DDLD4 using odin.plz guide me complete odin process.sorry for bad english
yadav anand said:
Iam new here and a little bit knowledge of flashing.bro you say that I have to flash I9070DDLD4 using odin.plz guide me complete odin process.sorry for bad english
Click to expand...
Click to collapse
HERE see this thread
download odin`s latest version just google it ,
and PDA = PA in latest odin .
also check in developer settings are ON then allow android debugging and allow mock locations checked ok.
Hope this helps GOOD LUCK :good:
still stuck at samsung galaxy s advance named logo
Bro it still stuck at galaxy s advance named logo and no recovery
If you have an SD card inserted, power off, remove the card, and power on again. A corrupt card can sometimes cause problems.
Take battery out wait for few minutes then re-insert it and try booting into recovery by holding all three keys simultaneously (VOL UP + HOME + POWER) until you feel sort of vibration ,or repeat the process try getting into download mode by pressing and holding (VOL DOWN + HOME _ POWER ) buttons ... .. i hope your phone is not bricked yet ,
meanwhile wait for other people for their suggestions.
Sent by using XDA-developers premium mobile app
ok I will try this method
Ok I try this method and also waiting for other people suggestions

Categories

Resources