I have been looking around the internet on how to unlock this tab (both English and Japanese websites) and I have came across this:
http://berorin.blog.shinobi.jp/Entry/1489/
According to this blogger, he unlocked his tablet by doing the following:
1. (本来使えないキャリアのSIMが刺さってる状態で)*7465625*638*#に電話
2. 使いたいSIMのMCC/MNCを入力(SBなら440/20)
3. ControlKeyに97286414
4. Unlock Saccessfull!的なメッセージが出たら再起動
5. 刺してあったSIMが認識される=アンロック完了
Translation
1. (With another carrier's sim card in the tablet) dial *7465625*638*#
2. Enter the sim card's MCC/MNC (For softbank it would be 440/20)
3. Enter 97286414 on the control key blank
4. A message like "Unlock Successful" would appear, and then reboot
5. The sim card's provider will be recognized (on your tablet) = unlock complete
SIMロック限定解除を解く場合。
To solve the limited sim unlock problem:
次に「#7465625*638*CODE#」をコール。
表示されるNetwork LockのEnter Network Lock Control Key欄に「97286414」を入力⇒OKをタップ。するとUnlock Successlyと表示される。
Next, dial #7465625*638*CODE#
The Network Lock screen with a Enter Network Control Key column should appear. Enter 97286414 then press/click ok. Once you do so, a message stating "Unlock success" should appear.
Now, I have the Overcome rom on my tab and tried this. It did not work. However, I am curious if someone with the original stock rom (Docomo) can successfully unlock this.
I do have network lock, network subset lock, SP lock, CP lock, and Data lock off but for some reason I still get the "Enter Network Control Key" message when I boot it up with another sim card.
Further references:
http://jimporterblog.blogspot.com/
http://jimporterblog.blogspot.com/2011/02/galaxy-tabsc-01csim.html
(Japanese)
Have you tried this one?
http://forum.xda-developers.com/showthread.php?t=843323
- If you use hexedit app, for clearer instruction do the procedure below :
1. Root the Tab, z4root.1.3.0.apk: http://forum.xda-dev...ad.php?t=833953
2. Install Super Manager as your root explorer. Enable root function in settings.
3. Backup /efs folder with Super Manager to your SDcard to be sure.
4. Open a copy of nv_data.bin in a hex editor. I installed HexEditor. Change 00181462 to 00 (note edit point is currently 01. It is the first two digits after seven "ff").
5. Open /efs with Super Manager set to Mount R/W and your modified nv_data.bin in the Root Explorer clipboard.
6. Rename or delete nv_data.bin and nv_data.bin.md5 and paste nv_data.bin (you have the originals in your /efs backup).
7. Power off the tab.
8. Insert new sim carrier.
9. Power on.
*Reference : http://www.thegalaxytabforum.com/index.php?/topic/168-guide-unlocking-samsung-galaxy-tab/
- - - please inform me if this works!
This method did work for the Docomo version of the galaxy tab. Many have attempted this and still had the network lock screen popping up.
sshimomichi said:
This method did work for the Docomo version of the galaxy tab. Many have attempted this and still had the network lock screen popping up.
Click to expand...
Click to collapse
I assume you mean did not work?
I also have a Docomo tab and am moving back to Australia after some time living in Japan and was hoping to unlock my tab. It's disappointing that the SC01C uses a different lock mechanism. I guess one of these little SIM boards that stick to your SIM to fool the device into thinking they are still on a different carrier might be an option. Selling it has become another option for me - I'm really annoyed that Samsung released this thing with all sorts of little arbitrary differences between different reasons creating lots of confusion about which roms can be run. Disappointing.
By the way I returned my SC01C back to stock, but I don't have a Docomo SIM so I have been using it WIFI only. I might see if I have another carrier SIM to try...
EDIT: I might not be much help as it appears my Docomo Tab is actually unlocked already. When I inserted an Australia Vodafone SIM in it accepted it but said 'No Service'. I would have thought it would have told me 'Invalid SIM' or words to that effect. Secondly, I tried the Softbank SIM from my HTC Desire in my Tab and it said 'Not registered on network', rather than warned me about the SIM. Is there any option I need to go to in order to test it further? I used my tab exclusively as a WIFI tab so far...
@zetsurin,
Have you tried changing the nv_data.bin on the /efs folder?
Rotohammer posted it works on all GSM Galaxy Tab.
Just be sure to back-up your original files, so you can revert it back.
Sent from my GT-P1000 using XDA Premium App
Success!!
Ok, I decided to try the codes and I am roaming on Softbank with an Australian Vodafone SIM using my SC01C Docomo tab!
Firstly, to summarise everything the following Samsung codes are involved:
*#7465625# = Check the locks
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
The whole 'Code' business confused me. So basically you enter it like this:
Firstly, I entered *7465625*638*#. If I enter '505/03' (Vodafone Aus) and then 97286414 for the control key, I actually get a 'Lock successful' message, and in fact I saw some other Japanese blogs mention this. This is because that's a lock request, rather then unlock request. So I decided to enter the lock check (first code) and it confirmed I have a lock on.
Then I entered #7465625*638*#. It requests the control code only this time. So I then entered 97286414 and bingo I see the 'unlock successful' message and then the lock check confirmed my tab is unlocked.
Finally I selected Softbank for roaming with my SIM and it worked perfectly. I believe this is the correct way to unlock the SC01C we have as it doesn't have the same format nv_data (I've seen several sources say this actually).
thanks!!!
i was able to unlock it.
problem is, im not able to register to either docomo or softbank. i wonder what's wrong since i can do this on my galaxy s.
Thanks Everyone, unlock successful!
zetsurin said:
Ok, I decided to try the codes and I am roaming on Softbank with an Australian Vodafone SIM using my SC01C Docomo tab!
Firstly, to summarise everything the following Samsung codes are involved:
*#7465625# = Check the locks
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
The whole 'Code' business confused me. So basically you enter it like this:
Firstly, I entered *7465625*638*#. If I enter '505/03' (Vodafone Aus) and then 97286414 for the control key, I actually get a 'Lock successful' message, and in fact I saw some other Japanese blogs mention this. This is because that's a lock request, rather then unlock request. So I decided to enter the lock check (first code) and it confirmed I have a lock on.
Then I entered #7465625*638*#. It requests the control code only this time. So I then entered 97286414 and bingo I see the 'unlock successful' message and then the lock check confirmed my tab is unlocked.
Finally I selected Softbank for roaming with my SIM and it worked perfectly. I believe this is the correct way to unlock the SC01C we have as it doesn't have the same format nv_data (I've seen several sources say this actually).
Click to expand...
Click to collapse
Hi Everyone,
thank you so much for the information, this is the easiest way to unlock my docomo galaxy tab, now I can use my t-mobile with the tab, I am super happy... I have been searching for an answer for a week and still cannot find the best way to unlock the docomo galaxy tab (so many people root it and did not work), until I saw this thread, only took me 2 seconds and now it's unlocked.. Thank you guys!
zetsurin said:
Ok, I decided to try the codes and I am roaming on Softbank with an Australian Vodafone SIM using my SC01C Docomo tab!
Firstly, to summarise everything the following Samsung codes are involved:
*#7465625# = Check the locks
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
The whole 'Code' business confused me. So basically you enter it like this:
Firstly, I entered *7465625*638*#. If I enter '505/03' (Vodafone Aus) and then 97286414 for the control key, I actually get a 'Lock successful' message, and in fact I saw some other Japanese blogs mention this. This is because that's a lock request, rather then unlock request. So I decided to enter the lock check (first code) and it confirmed I have a lock on.
Then I entered #7465625*638*#. It requests the control code only this time. So I then entered 97286414 and bingo I see the 'unlock successful' message and then the lock check confirmed my tab is unlocked.
Finally I selected Softbank for roaming with my SIM and it worked perfectly. I believe this is the correct way to unlock the SC01C we have as it doesn't have the same format nv_data (I've seen several sources say this actually).
Click to expand...
Click to collapse
This really worked..... Thank you so much!!
works, but ony until restart
Hi!
This is the first method, that really works with my docomo galaxy tab. Thank you verry much, for the manual!
Unfortunately it only works until I restart the phone. After restart it asks for network lock key again, and I have to do the whole process from the begining.
Is there any way to make this unlock permanent?
(I also tried several other methods, like haxediting, etc,)
I have an ATT SGT with Overcome ROM, and just unlocked my TAB with an app I got on the Market called Galaxy Tab Unlock. Worked without a hitch. I had no unlock code or anything from ATT. I have used different SIM's and they all work. Also have data working with non ATT SIM's after putting in the APN's. The app, once installed, is called Galaxy S Unlock, but works with my TAB. Painless!
Yes, it worked until i reboot the tab.
no solution for this issue yet?
zetsurin said:
Ok, I decided to try the codes and I am roaming on Softbank with an Australian Vodafone SIM using my SC01C Docomo tab!
Firstly, to summarise everything the following Samsung codes are involved:
*#7465625# = Check the locks
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
The whole 'Code' business confused me. So basically you enter it like this:
Firstly, I entered *7465625*638*#. If I enter '505/03' (Vodafone Aus) and then 97286414 for the control key, I actually get a 'Lock successful' message, and in fact I saw some other Japanese blogs mention this. This is because that's a lock request, rather then unlock request. So I decided to enter the lock check (first code) and it confirmed I have a lock on.
Then I entered #7465625*638*#. It requests the control code only this time. So I then entered 97286414 and bingo I see the 'unlock successful' message and then the lock check confirmed my tab is unlocked.
Finally I selected Softbank for roaming with my SIM and it worked perfectly. I believe this is the correct way to unlock the SC01C we have as it doesn't have the same format nv_data (I've seen several sources say this actually).
Click to expand...
Click to collapse
Did your procedure here but the tab still can't detect my SIM. But it said its already successfully unlocked.
I'm from Philippines. Hope you can help me here. thank you.
Unlock success
I WAS ABLE TO UNLOCK IT WITH ODIN,
just flashed with JPZ modem, so easy and 100% working,
mmrizmy said:
I WAS ABLE TO UNLOCK IT WITH ODIN,
just flashed with JPZ modem, so easy and 100% working,
Click to expand...
Click to collapse
Thanks. I have just flushed JPZ modem from http://forum.xda-developers.com/showthread.php?t=1069727 and it is unlocked
Yep
Ok
Ok I'm wondering if someone could help me out here. I picked up a Korean SKT Galaxy Note today, however the LTE isn't compatible with docomo's network. I did some searching online and found that there is a code you can put into the dialer to access a STK hidden menu, which ultimately let's you alter the phone to accept WCDMA frequencies and such. The code is:
319712358
However the phone then requires a password. I found 774632 as the password but when I put in the sequence, nothing happens.
I bought this phone used for 65,000 yen (about $720) and it is apparently unlocked, as I can use my docomo number without a problem. I desperately want to keep the phone (the store said I could return it) but have no use for it without the data, and thus would be incredibly grateful if someone could help me out...
May be try to use 996412 instead of 774632
TokyoGuy said:
Ok I'm wondering if someone could help me out here. I picked up a Korean SKT Galaxy Note today, however the LTE isn't compatible with docomo's network. I did some searching online and found that there is a code you can put into the dialer to access a STK hidden menu, which ultimately let's you alter the phone to accept WCDMA frequencies and such. The code is:
319712358
However the phone then requires a password. I found 774632 as the password but when I put in the sequence, nothing happens.
I bought this phone used for 65,000 yen (about $720) and it is apparently unlocked, as I can use my docomo number without a problem. I desperately want to keep the phone (the store said I could return it) but have no use for it without the data, and thus would be incredibly grateful if someone could help me out...
Click to expand...
Click to collapse
hi
if urs is shv-e160s , the code is 996412 hope it help
thank you very much lancechg, 996412 works on my e160s. my major problem is how to remove the restriction on camera and usb connection wich prevents me from rooting my gnote. can you give sn advice on to remove it. thanks in advance...
Hey dose anyone know how to unlock the note 3 threw the service it ms menu like you can on other galaxy phones ? I just got the phone on rogers and need to unlock it so I can use it with telus. Or does anyone know some good cheap sites that work for this phone without a processing time ?
GMoneyDTP said:
Hey dose anyone know how to unlock the note 3 threw the service it ms menu like you can on other galaxy phones ? I just got the phone on rogers and need to unlock it so I can use it with telus. Or does anyone know some good cheap sites that work for this phone without a processing time ?
Click to expand...
Click to collapse
Sorry for the late reply as I too was looking for this info and stumbled upon you post. The Note 3 doesn't seem to have the same options as the Galaxy S3 or Note 2. You can access it through *#197328640#. But there is no option for "network lock" as described in this thread:
http://forum.xda-developers.com/showthread.php?t=2176721
I'm not sure about unlocking option in the service menu. You can, however, unlock the note 3 by rooting and then running chainfire's regionlock away.
Hello Guys,
Would like to seek your expertise on how to SIM unlock my Galaxy S4 Active. I have tried to use these codes (116631) to access the utility manager however its only showing options 1-4, tried using the back key and menu key to enter 6, but its not showing up. my current OS is 4.4.4. kindly help, really wanted to use this phone and it was a gift from my brother in US. thanks in advance!
Hey all. Very annoying problem (one of many really) here with my xperia sp. I want to change network providers and got my unlock code no problem from my current carrier, no issue there. However when I put in the unlock code I'm told network unlock unsuccessful. I've attempted it twice as I don't want to risk making things worse. I've tried to check the service menu to see if the counter still has attempts but I can't access that either using *#*#7378423#*#*. The code disappears but nothing happens. I'm using paranoid nexus android version 4.4 and I've a locked bootloader if that makes any difference. I did buy the phone second hand so I realise the person before me could've used up all the attempts but it was only about a month old at the time and the person was on the same network as I am (I got the receipt when I bought it off them). Just wondering if anyone has any idea how I could possibly unlock the phone by whatever means or even get a look at my service menu??
My network is Meteor in Ireland if that makes any difference.
spiritcrusher88 said:
Hey all. Very annoying problem (one of many really) here with my xperia sp. I want to change network providers and got my unlock code no problem from my current carrier, no issue there. However when I put in the unlock code I'm told network unlock unsuccessful. I've attempted it twice as I don't want to risk making things worse. I've tried to check the service menu to see if the counter still has attempts but I can't access that either using *#*#7378423#*#*. The code disappears but nothing happens. I'm using paranoid nexus android version 4.4 and I've a locked bootloader if that makes any difference. I did buy the phone second hand so I realise the person before me could've used up all the attempts but it was only about a month old at the time and the person was on the same network as I am (I got the receipt when I bought it off them). Just wondering if anyone has any idea how I could possibly unlock the phone by whatever means or even get a look at my service menu??
My network is Meteor in Ireland if that makes any difference.
Click to expand...
Click to collapse
I think it's possible that you have to be on stock rom to unlock your device.
And service menu is not accessible in costum roms. Possible that it could be installed, I don't know.
Do the following steps:
1. Make a nandroid backup.
2. Go back to stock rom using the tool "Emma".
3. Do your unlock stuff.
4. Root and install recovery (get the same recovery as you use now!)
5. Go back to your current configuration by restoring your backup.
If you haven't used up all your attempts and your old carrier has given you the correct code, this will surely work!
If you have any further problems with unlocking, reply to this thread by quoting me! That way I'll get a notification. It's better to ask and wait before you've used up all your attempts
Gesendet von meinem
Sony Xperia SP - Cyanogenmod 12.1