Hello there!
I'm new in this section of XDA. And I'm a bit confused. There are many different threads how to root etc.
What order am I supposed to do things in?
In my previous section, the order was something like:
1. Root phone
2. Unlock bootloader
3. Flash kernel
4. Enter CWM and flash custom rom
Thanks in advance!
richard.elgh said:
Hello there!
I'm new in this section of XDA. And I'm a bit confused. There are many different threads how to root etc.
What order am I supposed to do things in?
In my previous section, the order was something like:
1. Root phone
2. Unlock bootloader
3. Flash kernel
4. Enter CWM and flash custom rom
Thanks in advance!
Click to expand...
Click to collapse
you shouldnt flash kernel before rom. because some kernels are not competitable with some roms. Roms comes with kernels anyway.
1. you should root your phone
2. install TWRP ( its used by most ROMs atm., its easier if you want to use CM or Omni or etc.) some apps in market helps to install TWRP and etc. ( Rashr if i remmember correct.)
3. Flash which ROM you want to ( but i suggest first make a nandroid backup in case things go wrong.) a.)go in recovery whipe data/system/dalvik/dalvik cache
b.) flash your rom from sd card.( zip file)
c.) flash gapps after you flash your rom.
d.) wipe dalvik and dalvik cache and reboot and youre good to go.
4. if you want to use different kernel which your ROM comes with. you can flash your kernel after your rom.
You can also flash your rom with odin. its easier and you can find how to flash with odin and when you flash with odin, you will also have recovery anyway and mostly ROMs comes with root after you flash. ( You should root your phone like go in recovery and flash supersu. if you going to use OmniRom as it not comes with root.)
hope it may help tho.
ersersoy said:
you shouldnt flash kernel before rom. because some kernels are not competitable with some roms. Roms comes with kernels anyway.
1. you should root your phone
2. install TWRP ( its used by most ROMs atm., its easier if you want to use CM or Omni or etc.) some apps in market helps to install TWRP and etc. ( Rashr if i remmember correct.)
3. Flash which ROM you want to ( but i suggest first make a nandroid backup in case things go wrong.) a.)go in recovery whipe data/system/dalvik/dalvik cache
b.) flash your rom from sd card.( zip file)
c.) flash gapps after you flash your rom.
d.) wipe dalvik and dalvik cache and reboot and youre good to go.
4. if you want to use different kernel which your ROM comes with. you can flash your kernel after your rom.
You can also flash your rom with odin. its easier and you can find how to flash with odin and when you flash with odin, you will also have recovery anyway and mostly ROMs comes with root after you flash. ( You should root your phone like go in recovery and flash supersu. if you going to use OmniRom as it not comes with root.)
hope it may help tho.
Click to expand...
Click to collapse
Thanks, I hope it will help. Not quite sure how to root yet though.
I had a Xperia Mini, always flashed kernel first for that phone.
Do I not need to flash a kernel seperately on this phone?
richard.elgh said:
Thanks, I hope it will help. Not quite sure how to root yet though.
I had a Xperia Mini, always flashed kernel first for that phone.
Do I not need to flash a kernel seperately on this phone?
Click to expand...
Click to collapse
oh after you install TWRP, you can install latest supersu zip from xda, and you can flash it to your phone and then you will have root, or there are some programs for one click root for samsung s3 mini, but not sure, didnt try them. but people say they are working good.
and yea, you flash your kernel after you flash your ROM, you can check in kernel parts and see if they are working with your rom and then you can flash it.
ersersoy said:
oh after you install TWRP, you can install latest supersu zip from xda, and you can flash it to your phone and then you will have root, or there are some programs for one click root for samsung s3 mini, but not sure, didnt try them. but people say they are working good.
and yea, you flash your kernel after you flash your ROM, you can check in kernel parts and see if they are working with your rom and then you can flash it.
Click to expand...
Click to collapse
I read this post: http://forum.xda-developers.com/showthread.php?t=2400123
But it doesn't say anything about installing a kernel.
Can I just follow this guide?
richard.elgh said:
I read this post: http://forum.xda-developers.com/showthread.php?t=2400123
But it doesn't say anything about installing a kernel.
Can I just follow this guide?
Click to expand...
Click to collapse
yes when you are installing a new ROM follow that guide. its pretty well written and it is definitely correct, just before you do anything and wipe any data. go to back up and make a nandroid back up to be safe. then you can restore it if anything goes wrong.
About kernel, you will do the same like rom. when you install your new rom and gapps just reboot your phone after you check around a bit and then flash kernel zip like how you installed your rom. just do not wipe anything and here are some kernels people use in samsung s3 mini.
http://forum.xda-developers.com/galaxy-s3-mini/development/kernel-fkernel-4-4-x-roms-f2fs-t2898666
http://forum.xda-developers.com/gal...nt/1n4148-kernel-i8190-cpu-oc-gpu-oc-t2959201
Thanks for your help! Tried to root with a program, iroot, but that did not work. :/
Sent from my GT-I8190 using XDA Free mobile app
richard.elgh said:
Thanks for your help! Tried to root with a program, iroot, but that did not work. :/
Sent from my GT-I8190 using XDA Free mobile app
Click to expand...
Click to collapse
well you can try these if you like,
http://forum.xda-developers.com/showthread.php?t=2459910
http://forum.xda-developers.com/showthread.php?t=2473747 im not sure about kingo root but people say its working.
first one install chineese market i guess but you can delete it, it wont cause any trouble i think. and after you flash your ROM all data will wipe and you will have root access anyway. im not sure if they work correctly but based on people comment, they are good to go
ersersoy said:
well you can try these if you like,
http://forum.xda-developers.com/showthread.php?t=2459910
http://forum.xda-developers.com/showthread.php?t=2473747 im not sure about kingo root but people say its working.
first one install chineese market i guess but you can delete it, it wont cause any trouble i think. and after you flash your ROM all data will wipe and you will have root access anyway. im not sure if they work correctly but based on people comment, they are good to go
Click to expand...
Click to collapse
Tried both vroot and kingo root, none of them worked. :/
Got it to work finally. Thanks for your help
richard.elgh said:
Got it to work finally. Thanks for your help
Click to expand...
Click to collapse
glad its working mate. cheers
Related
Hope to not disturb, today my Note arrived, so right now i got 4 hours with it. Impressions?!? You all know, is a great device.
So, since this morning i start reading and reading, but are alot of infos here, i lose some and i become confuse, so i will need some help in my order questions.
My build number is GINGERBREAD.XXLA6 (i understand users with it can easily brick the device), so here all my questions:
PS: Please post links too:
1- first step is to root and install cwm (how and link please), or i need to flash a new kernel to be sure my device will never be bricked (how and link please)?
2- after i flash custom kernel and install a new rom, i can make wipe all from custom recovery? After that danger situationto brick it will be forever gone?
3- i would like to unlock the sim network, it is working and it is safe?
4- i know about warranty, but i suppose i can allways go back to stock (i need stock kernel too or only rom?)
Dont know what to ask more, users who will read and write, please, write ALL STEPS, 1by1, from first to last, what i need to do, this phone was a big effort for me to buy it, without any jokes.
Thanks in advance!
darktyroll said:
Hope to not disturb, today my Note arrived, so right now i got 4 hours with it. Impressions?!? You all know, is a great device.
So, since this morning i start reading and reading, but are alot of infos here, i lose some and i become confuse, so i will need some help in my order questions.
My build number is GINGERBREAD.XXLA6 (i understand users with it can easily brick the device), so here all my questions:
PS: Please post links too:
1- first step is to root and install cwm (how and link please), or i need to flash a new kernel to be sure my device will never be bricked (how and link please)?
2- after i flash custom kernel and install a new rom, i can make wipe all from custom recovery? After that danger situationto brick it will be forever gone?
3- i would like to unlock the sim network, it is working and it is safe?
4- i know about warranty, but i suppose i can allways go back to stock (i need stock kernel too or only rom?)
Dont know what to ask more, users who will read and write, please, write ALL STEPS, 1by1, from first to last, what i need to do, this phone was a big effort for me to buy it, without any jokes.
Thanks in advance!
Click to expand...
Click to collapse
As long as you are on GB kernel, you are safe to wipe.
1. Check my sig. for excellent rooting guide by Dr.Ketan (post #3 for LA6), it will help in installing cwmr too.
2. You can wipe on any of the safe custom ICS kernels (if you flash custom ICS rom) just do not wipe on stock ICS kernels.
3. check galaxy_S unlock in play store to unlock, I dont think it is unsafe to do it (except some carrier terms, may be)
4. Once you flash stock firmware you will be back to normal. flashing stock firmware will also change kernel to stock.
I would suggest read a lot before doing anything as flashing custom roms, kernels or modding always include some risk.
jeetu1981 said:
As long as you are on GB kernel, you are safe to wipe.
1. Check my sig. for excellent rooting guide by Dr.Ketan (post #3 for LA6), it will help in installing cwmr too.
2. You can wipe on any of the safe custom ICS kernels (if you flash custom ICS rom) just do not wipe on stock ICS kernels.
3. check galaxy_S unlock in play store to unlock, I dont think it is unsafe to do it (except some carrier terms, may be)
4. Once you flash stock firmware you will be back to normal. flashing stock firmware will also change kernel to stock.
Click to expand...
Click to collapse
Thanks for the quick reply, and fluidity.
I will write back is something is wrong, thanks again.
And btw, what is the best kernel and rom untill now? I know allot depends by kernel...i need some speed and BATTERY
darktyroll said:
Thanks for the quick reply, and fluidity.
I will write back is something is wrong, thanks again.
And btw, what is the best kernel and rom untill now? I know allot depends by kernel...i need some speed and BATTERY
Click to expand...
Click to collapse
No prob, and by the way, why don't you simply flash pre-rooted GB rom (look for it in my sig.), it is already rooted and includes CWM recovery too. All you have to do is to just flash it and then flash any custom rom of your choice using cwm recovery.
Reason why I suggested flashing pre-rooted GB is that your rom seems to be non directly rootable and I think only option is to flash pre-rooted rom. (atleast as per my understanding)
jeetu1981 said:
No prob, and by the way, why don't you simply flash pre-rooted GB rom (look for it in my sig.), it is already rooted and includes CWM recovery too. All you have to do is to just flash it and then flash any custom rom of your choice using cwm recovery.
Reason why I suggested flashing pre-rooted GB is that your rom seems to be non directly rootable and I think only option is to flash pre-rooted rom. (atleast as per my understanding)
Click to expand...
Click to collapse
Well i think this i`m doing.
Right now i download SGN_XX_OXA_KJ1_FACTORYFS (GB Pre rooted ROM)
After that, since that pre-rooted rom have root, i can install cwm right?
Then i want to install an custom kernel and ICS rom (i think ics 4.0.4 is the best option for now, 4.1.1 i suppose it have bugs, i saw they are started only) -> that i asked you what is the best kernel and rom so far (ics)
Hope i`m doing good steps here
Update your phone the official way ie go into settings/about phone/ and your phone should update to ics. Then flash notecores kernal http://forum.xda-developers.com/showthread.php?t=1749863 using odin then your good to go i personally find this rom the besthttp://forum.xda-developers.com/showthread.php?t=1716088 but every1 has diffrent opinions depends wat u want.
Sent from my GT-N7000 using xda premium
darktyroll said:
Well i think this i`m doing.
Right now i download SGN_XX_OXA_KJ1_FACTORYFS (GB Pre rooted ROM)
After that, since that pre-rooted rom have root, i can install cwm right?
Then i want to install an custom kernel and ICS rom (i think ics 4.0.4 is the best option for now, 4.1.1 i suppose it have bugs, i saw they are started only) -> that i asked you what is the best kernel and rom so far (ics)
Hope i`m doing good steps here
Click to expand...
Click to collapse
If you choose to flash pre-rooted GB rom, then no need to install cwm separately, as it already includes cwmr, you just have to choose some custom rom and flash it using cwm recovery.
I was about to suggest you the other method of updating to stock ICS first and then rooting but it will take more time and it is of no use as your end motive is to flash custom roms
jeetu1981 said:
If you choose to flash pre-rooted GB rom, then no need to install cwm separately, as it already includes cwmr, you just have to choose some custom rom and flash it using cwm recovery.
I was about to suggest you the other method of updating to stock ICS first and then rooting but it will take more time and it is of no use as your end motive is to flash custom roms
Click to expand...
Click to collapse
Well, i will chose the method proviced by kyleastley too, seems more easy this way.
1- I will update to stock ics
2- then flash custom kernel .tar via odin
3- root and install cwm (if the custom kernel include already, dont know)
4- install custom rom (from cwm) since i can wipe after
Is ok this way?
So many questions, sorry guys }{
darktyroll said:
Well, i will chose the method proviced by kyleastley too, seems more easy this way.
1- I will update to stock ics
2- then flash custom kernel .tar via odin
3- root and install cwm (if the custom kernel include already, dont know)
4- install custom rom (from cwm) since i can wipe after
Is ok this way?
So many questions, sorry guys }{
Click to expand...
Click to collapse
Step 2 u can skip as its already done (dont know about root but definatly cmw) u wil not need root anyway as u can power down phone and reeboot into recovery via 3 button trick.
May i add step 6 install triangle away from play store as it will remove the triangle At boot as u flashed a kernal using odin.
As allways read and read again as uay already know that this phone has the brick problem but if u do everything by the book u will b ok.
Sent from my GT-N7000 using xda premium
darktyroll said:
Well, i will chose the method proviced by kyleastley too, seems more easy this way.
1- I will update to stock ics
2- then flash custom kernel .tar via odin
3- root and install cwm (if the custom kernel include already, dont know)
4- install custom rom (from cwm) since i can wipe after
Is ok this way?
So many questions, sorry guys }{
Click to expand...
Click to collapse
That's is completely fine if you want to go this way , step 1 and 2 are okay but step 3 not required as flashing custom kernel via odin will root and install cwmr. You will get yellow triangle and custom binary count by flashing custom kernel, which can be reset using triangle away. check rooting guide in my sig, once you are on stock ICS or ask here.
Checked above post after I posted mine, seems like its getting confusing here, okay so once you are on Stock ICS you have two methods to root and install cwmr,
1. once you are on stock ICS just flash some custom kernel using odin, it will root your device and flash cwmr too, then use triangle away app to remove yellow triangle and reset binary count. (method 2 in rooting guide in my sig.)
OR
2. Once you are on stock ICS, follow method 1 in rooting guide in my sig. in this you can root using stock recovery and then can flash custom kernel using mobile odin, so no yellow triangle or custom binary count.
jeetu1981 said:
That's is completely fine if you want to go this way , step 1 and 2 are okay but step 3 not required as flashing custom kernel via odin will root and install cwmr. You will get yellow triangle and custom binary count by flashing custom kernel, which can be reset using triangle away. check rooting guide in my sig, once you are on stock ICS or ask here.
Checked above post after I posted mine, seems like its getting confusing here, okay so once you are on Stock ICS you have two methods to root and install cwmr,
1. once you are on stock ICS just flash some custom kernel using odin, it will root your device and flash cwmr too, then use triangle away app to remove yellow triangle and reset binary count. (method 2 in rooting guide in my sig.)
2. Once you are on stock ICS, follow method 1 in rooting guide in my sig. in this you can root using stock recovery and then can flash custom kernel using mobile odin, so no yellow triangle or custom binary count.
Click to expand...
Click to collapse
Good you clarify me
5% left from download and then i will flash the update to ics.
let me see if i understand, after update to ics i will flash a custom kernel via odin (this will have root and cwm too), i will restart the phone and install yellow triangle and reset binary count
then i must root using stock recovery as you say and install again a custom kernel since the yellow triangle doesnt show up anymore? or you want to say i can flash custom rom since the triangle dont show up? -> confuse!
darktyroll said:
Good you clarify me
5% left from download and then i will flash the update to ics.
let me see if i understand, after update to ics i will flash a custom kernel via odin (this will have root and cwm too), i will restart the phone and install yellow triangle and reset binary count
then i must root using stock recovery as you say and install again a custom kernel since the yellow triangle doesnt show up anymore? or you want to say i can flash custom rom since the triangle dont show up? -> confuse!
Click to expand...
Click to collapse
No, don't follow what you have understood so far about rooting. these are 2 different methods for root, check rooting guide in my sig. it will clear everything.
And just want to make sure, are you downloading ICS rom or are you talking about percentage in kies?
jeetu1981 said:
No, don't follow what you have understood so far about rooting. these are 2 different methods for root, check rooting guide in my sig. it will clear everything.
And just want to make sure, are you downloading ICS rom or are you talking about percentage in kies?
Click to expand...
Click to collapse
Rom was donwloaded in phone, and installed as an update. Now i wait to finish the update.
darktyroll said:
Rom was donwloaded in phone, and installed as an update. Now i wait to finish the update.
Click to expand...
Click to collapse
Oh OTA, that's cool , now once you are on ICS (confirm it in setting/about phone before rooting) and then check rooting guide in my sig. and follow either method one OR method 2 described in it.
jeetu1981 said:
Oh OTA, that's cool , now once you are on ICS (confirm it in setting/about phone before rooting) and then check rooting guide in my sig. and follow either method one OR method 2 described in it.
Click to expand...
Click to collapse
I`m on ICS, trying to flash a custom kernel now via odin (or i must root first?)
and odin dont see my phone after i put in downloading mode.
darktyroll said:
I`m on ICS, trying to flash a custom kernel now via odin (or i must root first?)
and odin dont see my phone after i put in downloading mode.
Click to expand...
Click to collapse
No need to have root to flash custom kernel via odin, it will root it automatically.
Do you have Samsung drivers installed on your PC? If yes then try restarting your phone once again.
jeetu1981 said:
No need to have root to flash custom kernel via odin, it will root it automatically.
Do you have Samsung drivers installed on your PC? If yes then try restarting your phone once again.
Click to expand...
Click to collapse
Yes, drivers was. Anyhow i reinstalled other drivers, now odin see my phone :X
I flash custom kernel (HydraCore_v1 build12)
Indeed, SU is installed now.
Now i must install that apk to remove the triangle and then i can install custom rom? If yes, when i will install custom ics, i can wife before it now?
darktyroll said:
Yes, drivers was. Anyhow i reinstalled other drivers, now odin see my phone :X
I flash custom kernel (HydraCore_v1 build12)
Indeed, SU is installed now.
Now i must install that apk to remove the triangle and then i can install custom rom? If yes, when i will install custom ics, i can wife before it now?
Click to expand...
Click to collapse
You don't have to remove yellow triangle to install custom rom, you can still do it. Traingle away is just to remove the yellow triangle and to reset binary count for warranty purpose. Yes, you can wipe now, as you are on safe kernel.
Download any custom rom, which you wish to install, put it in your SD, boot in CWMR , perform full wipe and then flash the rom .zip.
jeetu1981 said:
You don't have to remove yellow triangle to install custom rom, you can still do it. Traingle away is just to remove the yellow triangle and to reset binary count for warranty purpose. Yes, you can wipe now, as you are on safe kernel.
Download any custom rom, which you wish to install, put it in your SD, boot in CWMR , perform full wipe and then flash the rom .zip.
Click to expand...
Click to collapse
Ok, i will try this last step.
Sorry, i late with writing, seems i got problems with all xp drivers, dunno why but i cannot transfer nothing betwheen pc and phone :|
THANKS FOR ALL!
I have a Samsung Galaxy Note N7000, where my brother somehow crashed the stock OS or something. Anyway, it can't run its 2.3 Gingebread OS, it can run only on recovery mode.
All the posts that I've scoured through this site requires me too root my current OS first, & then start flashing, which is not(if I'm not mistaken) an option for me, since I can't run the phone's functions.
Is there any way for me to flash my phone starting from recovery mode? Thanks a lot in advance.
PS: In all the posts I've seen for the note, I have to copy the ROM to my phone first. Now, I've flashed my windows phone(Samsung i800 Omnia) countless times, but there, I had the ROM on my PC, not my phone, & I did not have to do anything on my phone beforehand. If I can do something similar with my note, I think I can manage it.
Can't you do a factory reset?
JulGer01 said:
Can't you do a factory reset?
Click to expand...
Click to collapse
isn't factory reset done through settings? If so, It's impossible, since the OS does not run... If not, please tell me how. Thanks
JulGer01 said:
Can't you do a factory reset?
Click to expand...
Click to collapse
Just checked on the net on how to do it... The phone isn't with me right now, but I should have it in my hands tomorrow. I'll try it & let you know. Thanks.
While we're at it, IS there a way for me to flash & install a new OS direct from the recovery mode? I don't want the stock OS with useless features hogging the RAM, I prefer a vanilla custom JB, or Kitkat OS.... Thanks
baaler aga said:
Just checked on the net on how to do it... The phone isn't with me right now, but I should have it in my hands tomorrow. I'll try it & let you know. Thanks.
While we're at it, IS there a way for me to flash & install a new OS direct from the recovery mode? I don't want the stock OS with useless features hogging the RAM, I prefer a vanilla custom JB, or Kitkat OS.... Thanks
Click to expand...
Click to collapse
There's no safer wa than to flash a stock rom using odin first, then flash a safe kernel like philz with recovery, then you can flash custom roms that you want through recovery. You might want to direct flash philz recovery in stock recovery but since you don't know your build number, you might do damage to your phone instead.
Jackwu696 said:
There's no safer wa than to flash a stock rom using odin first, then flash a safe kernel like philz with recovery, then you can flash custom roms that you want through recovery. You might want to direct flash philz recovery in stock recovery but since you don't know your build number, you might do damage to your phone instead.
Click to expand...
Click to collapse
ok thanks man
Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
annie22 said:
Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
Click to expand...
Click to collapse
You came so far, its to late to turn back...
If only you had read the instructions...
Then you would know...
That you need a more recent version of your recovery...
Which is part of a kernel...
So flash raw kernel...
And then flash C-Rom...
annie22 said:
Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
Click to expand...
Click to collapse
To Flash ANY/ALL KK Based Roms (4.4+) you need base recovery 0f 6.0.4.4+. Can you still reboot to recovery? What rom vers are you previously on? Rooted? What recovery? If your charging port has been damaged, how are you gonna charge your phone? Get it repaired ASAP before doing anything else. Loss of battery during Rom flashing can make your phone a nice desk decoration.
Jackwu696 said:
To Flash ANY/ALL KK Based Roms (4.4+) you need base recovery 0f 6.0.4.4+. Can you still reboot to recovery? What rom vers are you previously on? Rooted? What recovery? If your charging port has been damaged, how are you gonna charge your phone? Get it repaired ASAP before doing anything else. Loss of battery during Rom flashing can make your phone a nice desk decoration.
Click to expand...
Click to collapse
Yes i can boot to recovery, thats all my phone does is load with the Samsung boot logo then the recovery screen. Im on the offical samsung stock rom. Yes its rooted.CWM, I use a universal battery charger, the battery was full before i tried flasing the C-Rom.
annie22 said:
Yes i can boot to recovery, thats all my phone does is load with the Samsung boot logo then the recovery screen. Im on the offical samsung stock rom. Yes its rooted.CWM, I use a universal battery charger, the battery was full before i tried flasing the C-Rom.
Click to expand...
Click to collapse
Do you still remember your Stock Rom's Build number? If yes, then you can try downloading philz safe kernel with recovery that is compatible with your build number, flash it in cwm recovery, then reboot to RECOVERY, from there do a factory reset wipe, all formats (system, data, cache, preload) wipe dalvik cache (If you don't understand any of the terms I mentioned above, please go to philz page and read) and Flash a TW BASED custom rom first (you can find and download any rom as long as it's TW based). See if that boots.
Ultimately you WILL need that charging/USB Port fixed so please make that a TOP Priority
Azeazezar said:
You came so far, its to late to turn back...
If only you had read the instructions...
Then you would know...
That you need a more recent version of your recovery...
Which is part of a kernel...
So flash raw kernel...
And then flash C-Rom...
Click to expand...
Click to collapse
I read the entire C-ROM tutorial, before doing anything.
Jackwu696 said:
Do you still remember your Stock Rom's Build number? If yes, then you can try downloading philz safe kernel with recovery that is compatible with your build number, flash it in cwm recovery, then reboot to RECOVERY, from there do a factory reset wipe, all formats (system, data, cache, preload) wipe dalvik cache (If you don't understand any of the terms I mentioned above, please go to philz page and read) and Flash a TW BASED custom rom first (you can find and download any rom as long as it's TW based). See if that boots.
Ultimately you WILL need that charging/USB Port fixed so please make that a TOP Priority
Click to expand...
Click to collapse
No i dont remember it...
annie22 said:
No i dont remember it...
Click to expand...
Click to collapse
Then I suggest you fix that port so you can use odin, otherwise follow @Azeazezar advice
annie22 said:
I read the entire C-ROM tutorial, before doing anything.
Click to expand...
Click to collapse
Follow these instructions.
Azeazezar said:
Follow these instructions.
Click to expand...
Click to collapse
Ohh, , okay will do.
@annie22 you could also download any JB kernel (if you were on JB) of philz and flash it in recovery, reboot recovery, then flash Raw kernel r4 or r5 and reboot recovery and from there flash C-Rom or any other KK rom. You can use any philz kernel irrespective of the build number as long as you are using it only to flash another kernel and then rom of your choice. Make sure to download the .zip version of the philz kernel and put that and raw kernel and rom on external sd card. Keep back up of these kernels and roms on pc as well so that you can connect memory card to pc and transfer those files back to card, as it so happened that i while doing full wipe on philz kernel it also wiped my external card.
treacherous_hawk said:
@annie22 you could also download any JB kernel (if you were on JB) of philz and flash it in recovery, reboot recovery, then flash Raw kernel r4 or r5 and reboot recovery and from there flash C-Rom or any other KK rom. You can use any philz kernel irrespective of the build number as long as you are using it only to flash another kernel and then rom of your choice. Make sure to download the .zip version of the philz kernel and put that and raw kernel and rom on external sd card. Keep back up of these kernels and roms on pc as well so that you can connect memory card to pc and transfer those files back to card, as it so happened that i while doing full wipe on philz kernel it also wiped my external card.
Click to expand...
Click to collapse
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
You should be able to flash raw kernel from just about any custom recovery. Just skip philz
Azeazezar said:
You should be able to flash raw kernel from just about any custom recovery. Just skip philz
Click to expand...
Click to collapse
Problem is, both r4 n r5 download links are dead... do u know any mirror? I'd like to keep a copy of r5 too just in case I need TWRP.
Sent from my GT-N7000 using XDA Free mobile app
Jackwu696 said:
Problem is, both r4 n r5 download links are dead... do u know any mirror? I'd like to keep a copy of r5 too just in case I need TWRP.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
The links work fine here.
If you have trouble I could send you a copy.
Azeazezar said:
The links work fine here.
If you have trouble I could send you a copy.
Click to expand...
Click to collapse
Yes I'd really like that mate. Gonna DL it 1st thing tomorrow. Just the raw5 will do. Thanks again for your trouble
Sent from my GT-N7000 using XDA Free mobile app
annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
Can't search, Can't help.
annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
if you r on cwm based or any custom recovery
goto android development page download forest cm11 kernel and flash it have latest philz recovery
if you are on stock
then
got original android development page >philz*******>download odin flashable md5> flash>install forestcm11 kernel> install c rom or any other
i dont know why u people search for single when you have an alternate
thanks to @forest1971
Flash success!!!! Bricked no more.
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
annie22 said:
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
Click to expand...
Click to collapse
Glad to hear that, Remember to change your thread by adding [SOLVED] to let others know and also as reference to others facing the same problem.
---------- Post added at 07:14 AM ---------- Previous post was at 07:14 AM ----------
annie22 said:
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
Click to expand...
Click to collapse
Glad to hear that, Remember to change your thread title by adding [SOLVED] to let others know and also as reference to others facing the same problem.
Hi Guys. short (and maybe dumb) question but i have to be sure before messing up the phone of my friend.
I would like to flash CM11 nightlies with clockworkmod on a Samsung Galaxy Note GT-N7000.
I have read several tutorials for flashing the GT-N7000 and i'm not sure which is the best way to do it.
It is neccesary to update or change the (current stock) kernel? Or is it possible to just copy the recovery and ROM to the SD card, boot into download mode, install from there?
Sorry i only have experience with flashing my HTC One X.
Thanks in advance,
Greetings
I am in the same possition. A friend of mine wants to help him install a custom rom to his n7000.
He has the stock samsung rom and the phone is LAGGY!!
I only have experience with flashing cm11 to my own galaxy s3 with philz touch recovery.
I am reading for 4 hours now and i am lost...
Should i only use TWRP?
but twrp has a version only for cm 10...(i havent found by searching any cm11 twrp version for n7000)
Should i use cm 10 then and all is ok??
Thanks a lot
I am reading things about installing kernel for recovery (philz touch)
After installing that, its just wipe data / cache and install Rom from Zip.
Im still bit confused about the rooting process -> Trough Zip or trough Odin.
I hope some1 can help me.
First you need root. Then you can flash a custom rom.
To root your device tgere a several ways possible. All written here in sticky threads.
Easy way via Philz Kernel. You will get custom recovery and root in in step. What Rom is currentky installed? Last five digits are enough.
User_99 said:
First you need root. Then you can flash a custom rom.
To root your device tgere a several ways possible. All written here in sticky threads.
Easy way via Philz Kernel. You will get custom recovery and root in in step. What Rom is currentky installed? Last five digits are enough.
Click to expand...
Click to collapse
Stock rom is currently installed. I uploaded a picture with the specs within an attachment
Search for XXLTA Kernel in PhilZ thread and flash this one. All written in PhilZ thread. After that take your new Rom an follow the instructions in the thread again. For CM 11 you need also Raw4 kernel first. Only after that flash the custom rom. But that's all written 100000 times here....
User_99 said:
Search for XXLTA Kernel in PhilZ thread and flash this one. All written in PhilZ thread. After that take your new Rom an follow the instructions in the thread again. For CM 11 you need also Raw4 kernel first. Only after that flash the custom rom. But that's all written 100000 times here....
Click to expand...
Click to collapse
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
hosseltietjes1990 said:
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
Click to expand...
Click to collapse
you also need gapps
eveles said:
you also need gapps (and maybe for later use one custom kernel )
Click to expand...
Click to collapse
Yes i know, to install play store and other applications. But for the flashing part, that is enough right? The kernel, ROM and Philz Recovery?
hosseltietjes1990 said:
Yes i know, to install play store and other applications. But for the flashing part, that is enough right? The kernel, ROM and Philz Recovery?
Click to expand...
Click to collapse
yes that is enough but gapps are usually installed right after the ROM so having it together with the other files is a good idea.
- transfer ROM, Kernels to internal or external SD.
- flash Philz JB kernel compatible with your device [ follow the instruction in Philz kernel thread on how to flash with no yellow triangle ] and reboot then verify that root is working (just try and give a file explorer root access or install an app like root checker from playstore)
- Once root is verified reboot to recovery (you should now be in philz touch recovery) I recommend you take a nandroid backup but the choice is yours
- Wait for the backup to complete or if you are skipping backup then
a) wipe data factory reset
b) wipe cache
c) format system by going into mounts and storage
d) wipe dalvik cache
- flash raw kernel and reboot recovery.
- Now in TWRP recovery (you can again choose to do steps a to d which is totally optional) find and flash the ROM you want
- flash gapps
- reboot
That should do it
and now just in case you don't like what you flashed you can always go back to your ROM if you took a nandroid backup as suggested in the installation steps
hope it helps
Restore instructions :
I don't know if CWM recovery takes he same path to backup as Philz recovery but if it does it pretty simple
- just reboot to recovery and do the steps a to d from the above installation steps and restore backup
But in case you are not able to find backup file in CWM then do this
- reboot to recovery
- flash Philz kernel (same one you flashed during installation )
-go to advanced and select "reboot recovery"
- now you should be in Philz recovery again
- do steps from a to d again and restore
Simple
REVENGE SOLVES EVERYTHING
tysonraylee said:
yes that is enough but gapps are usually installed right after the ROM so having it together with the other files is a good idea.
- transfer ROM, Kernels to internal or external SD.
- flash Philz JB kernel compatible with your device [ follow the instruction in Philz kernel thread on how to flash with no yellow triangle ] and reboot then verify that root is working (just try and give a file explorer root access or install an app like root checker from playstore)
- Once root is verified reboot to recovery (you should now be in philz touch recovery) I recommend you take a nandroid backup but the choice is yours
- Wait for the backup to complete or if you are skipping backup then
a) wipe data factory reset
b) wipe cache
c) format system by going into mounts and storage
d) wipe dalvik cache
- flash raw kernel and reboot recovery.
- Now in TWRP recovery (you can again choose to do steps a to d which is totally optional) find and flash the ROM you want
- flash gapps
- reboot
That should do it
and now just in case you don't like what you flashed you can always go back to your ROM if you took a nandroid backup as suggested in the installation steps
hope it helps
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Very clear! Thank you very much. Sorry for being a noob with this but it i think you cant be too sure when you are flashing kernels. Got my Nexus S bricked once while i was flashing a custom kernel.
And i dont have any experience with flashing samsung phone. Only HTC.
Thanks again and have a good day!
hosseltietjes1990 said:
Very clear! Thank you very much. Sorry for being a noob with this but it i think you cant be too sure when you are flashing kernels. Got my Nexus S bricked once while i was flashing a custom kernel.
And i dont have any experience with flashing samsung phone. Only HTC.
Thanks again and have a good day!
Click to expand...
Click to collapse
I was in the same boat 2 years ago so i understand the situation I am glad i could help and if you are coming from nexus I am pretty sure you won't have any issues at all. Just one or two flashes and you will know everything
and who knows I might need your help one day as I am thinking of buying the N6 myself
oh and btw let me tell you that recovery and kernel are in the same partition for N7000 so you can't have "this kernel and that recovery" here as you would in other devices. Thus if you need a certain recovery then you have to flash a certain kernel and if you need a certain kernel then it will install the recovery that comes with it overwriting the previous one. Also even if you flash just recovery somehow, the device will restore the one with the kernel upon reboot
So yeah
REVENGE SOLVES EVERYTHING
tysonraylee said:
I was in the same boat 2 years ago so i understand the situation I am glad i could help and if you are coming from nexus I am pretty sure you won't have any issues at all. Just one or two flashes and you will know everything
and who knows I might need your help one day as I am thinking of buying the N6 myself
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
I just recently flashed my HTC one X And the One X of a friend of mine. No need there to flash the kernel on that phone, only recovery trough adb and flash rom. So i really dont wanna mess with kernels
I you would like to ask something, feel free to ask! Thanks for the support
hosseltietjes1990 said:
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
Click to expand...
Click to collapse
In the guide below
http://forum.xda-developers.com/showthread.php?p=53346482
it clearly says ''-Download Raw Kernel r5 and copy it to either your internal or external memory''
You have downloaded raw_kernel_r4_j43
Why is that?
Am i missing something?
My friend's n7000 runs on 4.1.2 as well and my goal is to install cm11 as well.
Saying that, which is the appropriate raw_kernel???
The kernel code name should match the currently installed TW rom (4.1.2) or should it match the CM11 rom you intend to flash (4.4.4)????
to answer my own question : In XxPixX's quide of course it says r5 so 4.4.4 )
Anyway the kernel that you have downloaded is neither r5 nor r1 (i beleive that r1 is for 4.1)
Thanks, i hope someone with more experiense would clarify that!!
eveles said:
In the guide below
http://forum.xda-developers.com/showthread.php?p=53346482
it clearly says ''-Download Raw Kernel r5 and copy it to either your internal or external memory''
You have downloaded raw_kernel_r4_j43
Why is that?
Am i missing something?
My friend's n7000 runs on 4.1.2 as well and my goal is to install cm11 as well.
Saying that, which is the appropriate raw_kernel???
thanks!!!!!!
Click to expand...
Click to collapse
yes you have to download raw kernel because CM 11 or Android Kitkat requires SE Linux compatible recovery and raw kernel is the one that has this compatibility.
If you skip raw kernel then installation will fail giving you "status 7 installation aborted" error.
Downloading the latest Raw kernel for KitKat should do it just read in the kernel thread and download the latest one for kk.
the kernel code name should match the ROM (4.1.2) the one you currently have. Download the philz JB kernel for your JB ROM(follow the steps given in philz kernel thread)
There is no requirement as such for 4.4.4 ROM
REVENGE SOLVES EVERYTHING
tysonraylee said:
yes you have to download raw kernel because CM 11 or Android Kitkat requires SE Linux compatible recovery and raw kernel is the one that has this compatibility.
If you skip raw kernel then installation will fail giving you "status 7 installation aborted" error.
Downloading the latest Raw kernel for KitKat should do it just read in the kernel thread and download the latest one for kk.
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
hosseltietjes1990 said:
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
Click to expand...
Click to collapse
The download link you have provided links to r6 not r5
r6 says that is only for omniron 4.4
We were talking about cm11.
eveles said:
The download link you have provided links to r6 not r5
Click to expand...
Click to collapse
Oh i'm sorry haha. R6 should work right?
edit: sorry i did not read properly. r5 it is then
hosseltietjes1990 said:
Oh i'm sorry haha. R6 should work right?
Click to expand...
Click to collapse
No.
r5 should work.
Dude you are more confused than i am!!
hosseltietjes1990 said:
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
Click to expand...
Click to collapse
yes that should do it, download the k44 one
I haven't seen any videos about that but it is possible to do so but that's just using the recovery temporarily to flash a certain ROM but in the end that recovery is replaced by the ROMs kernel recovery its the same thing we are doing by using raw kernel here in these installation steps but its true that it gets a little confusing
I have updated my previous reply. Please refresh the page to see the explanation
eveles said:
The download link you have provided links to r6 not r5
Click to expand...
Click to collapse
R6 is the latest version. Please download the R6-k44.zip
REVENGE SOLVES EVERYTHING
Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
wingleaf said:
Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
Click to expand...
Click to collapse
Hi!
Maybe this will help: How to use Odin for GT-I9070
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
DjDiabolik said:
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
Click to expand...
Click to collapse
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
kilroy69 said:
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
Click to expand...
Click to collapse
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
DjDiabolik said:
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
Click to expand...
Click to collapse
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
kilroy69 said:
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
Click to expand...
Click to collapse
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
DjDiabolik said:
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
Click to expand...
Click to collapse
This is the right order for me after Odin;
in recovery: wipe, flash update.zip, flash mkkernel zip, flash root.zip and then custom rom + gapps.
I don't flash kernel on custom rom. You know that you need it or not. I think that's unnecessary. I would rather flashing kernel before flashing custom rom.