Carliv Touch Recovery for Canvas Turbo A250/Clones
Requirements
1. Phone Rooted and Mobile Uncle Tools (Flash through Phone)
2. Sp Flash Tool(Fflash it from PC)
Downloads
NEW: Carliv Touch Recovery v2.7 (port using stock recovery) Original Thread by @carliv
Old: Carliv Touch Recovery 2.4 (build with CTR 2.4) Original Thread by @yuweng
Instructions (Flash using phone)
1. Download the recovery to your internal sd-card and rename it to "recovery.img"
2. Open Mobile uncle tools and select Recovery Update
3. Flash recovery file
4. Done
Instructions (Flash through SP Flash Tools)
1. Install drivers for your phone and download SP Flash Tools and drivers.
2. Click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device (you can drag from your stock rom folder)
3.Check only recovery.img, preloader and uncheck all others.
4. Switch off your phone (Wait 1 min).
5. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
6. Click the Download option (present on the right of Firmware > Upgrade option) and SP Flash Tools will start looking for your phone.
7. Connect your phone. SP Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
8. After the process completes, a green ring will appear on your device signalling that the process was successful.
9.Disconnect and turn on your phone.
Credits
@carliv
@adrpat
@yuweng
@FSadino
ALWAYS REMEMBER!!!
I Will Not Be Responsible For Any Bricked Devices or Any Problem So Use It At Your Own Risk.
XDA:DevDB Information
Carliv Touch Recovery OLD 2.4 & NEW 2.7, Tool/Utility for the Micromax Canvas Turbo A250
Contributors
FSadino, @carliv, @adrpat, @yuweng
Source Code: http://forum.xda-developers.com/android/development/guide-how-to-port-custom-cwm-based-t2970004
Version Information
Status: Stable
Created 2015-02-09
Last Updated 2015-02-11
Reserved
F.A.Q.
* Canvas A210/Clones *
If you like to see, this is my Carliv Touch Recovery (2.4) http://www.mediafire.com/download/ycj0f0r8wjbhv7i/recovery.img
Aroma File manager don't work with touch (only keys), the rest, the touch it´s ok
flashable with mobileuncle MTK tool
Continua o Bom trabalho !!!
adrpat said:
If you like to see, this is my Carliv Touch Recovery (2.4) http://www.mediafire.com/download/ycj0f0r8wjbhv7i/recovery.img
Aroma File manager don't work with touch (only keys), the rest, the touch it´s ok
flashable with mobileuncle MTK tool
Continua o Bom trabalho !!!
Click to expand...
Click to collapse
device?
Wiko darkfull and clones....
adrpat said:
Wiko darkfull and clones....
Click to expand...
Click to collapse
Where you download it? Can you share the sorce link?
FSadino said:
Where you download it? Can you share the sorce link?
Click to expand...
Click to collapse
it´s made by me ...
the sorce it´s the same as yours
used carlivImageKitchen
adrpat said:
it´s made by me ...
the sorce it´s the same as yours
used carlivImageKitchen
Click to expand...
Click to collapse
Which base carliv-recovery you used? I think mine doesn't have touch
FSadino said:
Which base carliv-recovery you used? I think mine doesn't have touch
Click to expand...
Click to collapse
use "CarlivTouch-recovery-2_4-1080x1920" its more stable
---------- Post added at 10:49 PM ---------- Previous post was at 10:21 PM ----------
I noticed that already exists a final version a Carliv Touch Recovery v2.7 rebuilt from base (cwm 6.0.3.7)
so here you have already compiled by me
DOWNLOAD
you can use this kitchen to compile your way, just edit the res folder in ramdisk. use as sorce my recovery27 in the link above
recalls that the result recovery can not pass 6 Mb
Credits for Carliv (obvious...)
adrpat said:
use "CarlivTouch-recovery-2_4-1080x1920" its more stable
---------- Post added at 10:49 PM ---------- Previous post was at 10:21 PM ----------
I noticed that already exists a final version a Carliv Touch Recovery v2.7 rebuilt from base (cwm 6.0.3.7)
so here you have already compiled by me
DOWNLOAD
you can use this kitchen to compile your way, just edit the res folder in ramdisk. use as sorce my recovery27 in the link above
recalls that the result recovery can not pass 6 Mb
Credits for Carlvic (obvious...)
Click to expand...
Click to collapse
I didnt use this kitchen to compile my recovery but tomorrow i will use carliv_2.7 and kitchen.
If i succed, i will update this thread and give you the right credits
Thanks you so much
greets
@adrpat Now i see were you get the information to port default.prop... I used CTRv2.4 to port automatically carliv_recovery_v2.4 and then i get that info (from default.prop) and port manually carliv_recovery_2.7
Thanks for your help bro.
Related
This is the first ever thread dedicated to Micromax Canvas Turbo A250/ Blu Life One X / Explay Dream.
Micromax Canvas Turbo A250 / Blu Life One X / Explay Dream / Wiko Darkfull
Warning for blu life one x users: As I dont have blu life one x stock rom so please take backup of everything including nvram folder, Modem.img etc. The Sim unlock code is 12345678 and its same for other Blu devices as well apparently. The catch is you'll have to use it EVERY TIME you reboot the phone and you also lose 4G.
Micromax Canvas Turbo Stock Rom V1, V2, V3 & V4
Explay Dream Stock Rom V1 & V2
Wiko Darkfull Stock Rom V1
CWM Recovery
TWRP Recovery
CTR Recovery
Rooting methods
Windows 7/8 32 Bit and 64 Bit Driver
Custom ROMs
Other Forum Links
Read everything or risk a brick. Standard disclaimer. Your warranty is now void. Use at your own risk. In other words, it is your choice to use this method; I am not responsible for any damage or problems. Always take backup of everything e.g. Nvram folder using various tools like recovery, titanium backup, root browser etc. Don’t do it if you don’t know what is rooting and custom rom / firmware.
Hey Friends…
1. XDA Forum Link : http://forum.xda-developers.com/canvas-turbo
2. Russian 4pda Forum Link for Explay Dream: http://4pda.ru/forum/index.php?showtopic=528404
3. Official Support Link of Explay Dream :http://support.explay.ru/product/303
4. French Forum Link for Wiko Darkfull Hell: http://www.wikoandco.fr/forum/wiko-darkfull
5. Stock Rom V1: http://www.mediafire.com/download/deneem8tnwuc288/Micromax+A240+Canvas+5+Stock+firmware.rar
6. Stock Rom V2:http://www.mediafire.com/download/depjhd14hokmcv8/S9311_MP_IN_MMX_16_flasher_user.rar
7. Stock Rom V3:http://www.mediafire.com/download/up99dajbr7m643z/MMX_A250_V3.zip
8. Stock Rom V4:https://docs.google.com/uc?id=0B74b7RoIPJyfdExlek5nMDNJUGc&export=download This link contains same file two times. That is why it's file size is double. Please suggest some other link of Stock V4.
9. Explay Dream Stock Rom V1: http://explay.ru/download/firmware/mobile/dream/Dream_10.10.2013_v1.00.rar
10. Explay Dream Stock Rom V2: http://explay.ru/download/firmware/mobile/dream/Dream_03.04.2013_V1.01.rar
This is great stock Rom. You should try this. Before flashing this via SP Tool, take backup of IMEI by mobile uncle as it will ERASE IMEI. Restore by the same method. In WiFi It will show NVRam Error also; that can easily be fixed by the methods available on XDA Forum. (Or ask me in this thread)
11. Wiko Darkfull Stock ROM V1: https://drive.google.com/file/d/0BxSrpG01GSZ9Z0loLWpweGpUc3c/edit?usp=sharing
12. Drivers (Windows 32 Bit):http://www.mediafire.com/download/hl0jj1f74lazoc7/Mobistel_Cynus_T1_Drivers_x86.exe or http://www.medIafIre.com/download/nv96xclhjmaiclu/Mobistel_Cynus_T1_Drivers_x86.exe
13: Drivers (Windows 64 Bit):http://explay.ru/download/firmware/mobile/dream/Win8 SmartPhoneDriver.rar
14. SP Tool:http://www.mediafire.com/download/8bauf98i2dri2jj/SP_Flash_Tool_exe_v3.1312.0.139.zip
15. Steps for flashing stock ROM via SP Tool:
a) You need to download Rom and SP Tool from above link.
b) Download AND Install MTK Drivers.
c) Reboot your PC.
d) Unrar S9311_MP_IN_MMX_15_flasher_user.rar and unzip SP_Flash_Tool_exe_v3.1312.0.139.zip using any Unrar tool like peazip, 7zip, winrar.
e) You will have two folder S9311_MP_IN_MMX_15_flasher_user and SP_Flash_Tool_exe_v3.1312.0.139.
f) Switch off Your Phone. Make sure you have sufficient battery charged or use laptop to do this. (Do NOT connect phone to PC)
g) Open Flash_tool.exe from folder SP_Flash_Tool_exe_v3.1312.0.139.
h) Click Scatter-Loading button, choose MT6589_Android_scatter.txt file from folder S9311_MP_IN_MMX_15_flasher_user.
i) Wait file to be added into Flash Tool.
j) Choose Option->USB Model, click USB Model.
k) Choose Option->DA DownLoad All->Speed->High Speed, click High Speed.
l) Click Firmware download.
m) Now connect phone.
n) Software start downloading.
o) After few minutes you will see big green circle.
p) Done. Boot your phone.
16. Rooting Method: Version Link Updated. It is working with all firmware now.
a) Install frameroot.apk Place downloaded apk in to internal sd card and install it.http://forum.xda-developers.com/attachment.php?attachmentid=2566341&d=1391850491
b) select super su
c) click on Boromir
d) reboot.
e) Its Rooted.
f) Done.
17. CWM Recovery Link: http://www.mediafire.com/?33tcc9j7k3o4wgt
18. TWRP 2.6.3.0 Recovery : http://forum.xda-developers.com/can...overy-twrp-2-6-3-0-recovery-micromax-t2665322
19. CTR Recovery: http://forum.xda-developers.com/attachment.php?attachmentid=2598464&d=1393269137
20. Rooting Method Via CWM / TWRP Recovery Flashable ZIP: http://www.mediafire.com/download/a7l8084akth2lf5/root.zip
21. Flashing Method of CWM / TWRP via Mobile Uncle (Play Store App):
a) Place downloaded CWM / TWRP Recover in to root of your internal storage of phone.
b) Download from play store.
c) Grant Root Permissions to it.
d) Select Update recovery.
e) Select the recovery that is in internal storage.
f) Flash.
g) Reboot.
h) Done Enjoy...
22. Flashing Method of CWM / TWRP via SP tool.
Steps:
a) You need to download Rom and SP Tool from above link.
b) Download AND Install MTK Drivers.
c) Reboot your PC.
d) Unrar S9311_MP_IN_MMX_15_flasher_user.rar and unzip SP_Flash_Tool_exe_v3.1312.0.139.zip using any Unrar tool like peazip, 7zip, winrar.
e) You will have two folder S9311_MP_IN_MMX_15_flasher_user and SP_Flash_Tool_exe_v3.1312.0.139.
f) Switch off Your Phone. Make sure you have sufficient battery charged or use laptop to do this. (Do NOT connect phone to PC)
g) Open Flash_tool.exe from folder SP_Flash_Tool_exe_v3.1312.0.139.
h) Click Scatter-Loading button, choose MT6589_Android_scatter.txt file from folder S9311_MP_IN_MMX_15_flasher_user.
i) Wait file to be added into Flash Tool. Now uncheck all options except Recovery. Click on Recovery and select CWM / TWRP Recovery Provided in Link.
j) Choose Option->USB Model, click USB Model.
k) Choose Option->DA DownLoad All->Speed->High Speed, click High Speed.
l) Click Firmware download.
m) Now connect phone.
n) Software start downloading.
o) After few minutes you will see big green circle.
p) Done. Boot your phone.
23. Untouched Stock ROM V1 Nandroid backup: http://www.mediafire.com/download/w8sw6inakd6yl5i/clockworkmod.zip
24. Stock Boot: http://www.mediafire.com/download/ao7g1740t2tjaly/boot.img
25. Stock Recovery: http://www.mediafire.com/download/8l51ilzyai9nkxm/recovery.img
26. Custom ROMs: None of the following rom has all 10 sensors working.
a) Lenovo Based ROM: http://www.mediafire.com/download/958r85q3b339r71/Lenovo Based Custom Rom Canvas Turbo A250.ZIP
b) LeWa OS: http://www.mediafire.com/download/a89smk0bbzr25oy/LeWa OS Canvas Turbo A250.zip
c) MiUi: http://www.mediafire.com/download/bt7wmtxhs3ah3qd/MiUi Canvas Turbo A250.ZIP
d) Color OS: http://www.mediafire.com/download/64k81lumjqvi8au/ColorOS Canvas Turbo A250.ZIP
e) Xperia Based: http://www.mediafire.com/download/513ife18cgn839j/Xperia Based.zip
f) Pure Android Based: http://www.mediafire.com/download/3h34gzezv42abfr/Pure Android 4.2.1.zip
g) [4.4.2][ultimate] Kitkat themed rom[ok google +++] PROJECT SJO : http://forum.xda-developers.com/canvas-turbo/development/4-4-2-kitkat-themed-rom-t2679445
h) Deleted by Developer.
i) Hike OS : http://forum.xda-developers.com/canvas-turbo/development/rom-hike-os-pandora-2-t2683859
j) Color OS V2 : https://docs.google.com/uc?id=0B89MM549_xaLQkdpQlJmWGVGTzQ&export=download (Most Loved Custom Rom based on User Review)
k)[NOTE 3 v3 By Remzej] Ported to A250 [Multiwindow]: http://forum.xda-developers.com/canvas-turbo/development/rom-ported-to-a250-t2686622
l) Stock ROM Canvas Turbo Tweaked [PreRooted][Deodexed] : http://forum.xda-developers.com/canvas-turbo/development/rom-stock-rom-canvas-turbo-tweaked-t2688869
m) [Stock & Advanced]-SLT TSUNAMI Ex-Advanced Edition: http://forum.xda-developers.com/can.../rom-slt-tsunami-ex-advanced-edition-t2692995
n) [Lite] [Stable] NineTails Roms V1.0 : http://forum.xda-developers.com/canvas-turbo/development/lite-ninetails-roms-v1-0-t2691834
o) Lenovo Vibe For Micromax A250 [4.2.2] : http://forum.xda-developers.com/canvas-turbo/development/rom-lenovo-vibe-micromax-a250-t2696463
p) Tweaked Deodexed [Stock ROM] Micromax A250 Rom Ver.1.0 [17-4-14]: http://forum.xda-developers.com/can.../stock-rom-tweaked-deodexed-micromax-t2720361
q) [MIUI] [4.4.4] Unofficial MIUI V5 - Multi languages : http://forum.xda-developers.com/can...t-unofficial-miui-v5-multi-languages-t2695066
r) [XPERIA][4.4.2-LIKE] PureXperia Z2 FOR A250 and clones [Performance + Gaming + Battery Life]: http://forum.xda-developers.com/canvas-turbo/development/xperia-purexperia-z2-a250-clones-t2748902
s) [ROM][JB 4.2.2] ROYAL ROM: http://forum.xda-developers.com/can...m-royal-rom-canvas-turbo-a250-stable-t2751635
t) COLOSSUS™ 4.0.0603: http://forum.xda-developers.com/canvas-turbo/development/colossus-4-0-0603-t2775076
u) [Port] [MIUI] [4.4.4] Unofficial MIUI V5 - Multi languages: http://forum.xda-developers.com/can...t-unofficial-miui-v5-multi-languages-t2695066
Please Press Thanks if I helped.
Special Thanks to : manishswami, saurabh2012, Dzzhyn, Srika, sansans90, suhas.holla
Thank You nrupesh2912 for porting many ROMs for our device, This thread is incomplete without your development
Any rom available for A250.???
Sent from my A250 using XDA Premium 4 mobile app
manishswami said:
Any rom available for A250.???
Sent from my A250 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
same question.
Nice & Smile
Thanks bro keep it up
Custom Rom
Reserved 1
Thanks
Reserved 2
Please Try TO PORT Note3 ROM
CWM RECOVERY FOR A250 MICROMAX TURBO
Sent from my A250 using XDA Premium 4 mobile app
Not Working Recovery
Reserved 3
Reserved 4
CWM Working ...Thanks
Micromax A250 New Software Update
A250: The software version “S9311_MP_IN_MMX_16_flasher_user” is confirmed. [build time: Fri Nov 8 11:39:12 cst 2013]
Release note:
Disable the flash light function during continuous shot
http://hotfile.com/dl/254834956/c06863f/S9311_MP_IN_MMX_16_flasher_user.rar.html
manishswami said:
A250: The software version “S9311_MP_IN_MMX_16_flasher_user” is confirmed. [build time: Fri Nov 8 11:39:12 cst 2013]
Release note:
Disable the flash light function during continuous shot
http://hotfile.com/dl/254834956/c06863f/S9311_MP_IN_MMX_16_flasher_user.rar.html
Click to expand...
Click to collapse
Thanks Manish. I have uploaded this ROM to Meadiafire and Linked to our forum first post.
Thankx Pressed.
manishswami said:
Any rom available for A250.???
Sent from my A250 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
you have to wait for another one week or may be 2 ..developers are working hard to release bug free ROM for sizzling "TURBO" ... :angel:
Waiting... Which rom in process??? MIUI OR LIKE SAMSUNG ??
Sent from my A250 using XDA Premium 4 mobile app
First of all thanx for rooting and installing cwm procedures
Awesome work
can anyone port htc sense style task manager for mmx a250?
.
Make rom for CWM.
Upgrade/Update Micromax Canvas Turbo to 4.4 KitKat (FAKE OR ????)
Its FAKE or Real
Plz Check
http://jellybeankitkata.blogspot.in/2013/10/upgradeupdate-micromax-canvas-turbo-to.html ??
What is the advantage of the patched boot.img file over default boot.img?
what is this patched boot.img?
sizariya said:
Working CWM and Patched Boot.img added in first post.
My own compilation...
Click to expand...
Click to collapse
pradipsoman said:
What is the advantage of the patched boot.img file over default boot.img?
Click to expand...
Click to collapse
Hi @sizariya
Same question here! Why the patch required. Was it giving any problem? Or any improvement?
Good week-end ....
I try to share with the mixer rom,
What have this ROM ?
- It is a Rom MIX FROM:
* ENOX ROM 20D ( based on F4 ROM)
* G-XPlotion Rom From Alluccio (Based on SUN2 - Xensial ROM )
* LG Stock ROM 20D (LGE Original APK + KERNEL)
* LG G2 Deodex APP (LGE Original APK)
* LG G Deodex APP (LGE Original APK)
- Real Based on 20D LG 4.1.2 KERNEL + LIBS
- Stock Setting and Sound ( from g2)
- Qslide2 From LG G2
- SistemUI From LG G3 (ported from Giannif )
- Witout Problems WIFI,RADIO or Tethering ( test all )
- Heat problems Controled ( as 20D original ROM)
- Qmemo Save to Notebook witout size problems
- Change ring to to contats ok
- SMS AND MMS OK ( ORIGINAL VERSION)
- Change Contacts Information OK ( test only Google account contact )
- Unlock without problema
Bugs ?
yes, when launch LGEmail from qslidebar, "EMAIL FC" , solution ? drop EMAIl from QSlide Bar
the ROM have a Extenden Reboot MEnu on Italian Language, you can change put Xpossed Advance power Menu
My Device have a doublé press power to wake up, sometimes, i use Xpossed Action to remap the keys and solved it.
I can setting the LGVutalk services, but i can to test because i have not a other number or pone to call with this service.
Whatsapp service Works ok, and do not show alert for ROM Custom.
there are a other package to this rom and work very well,
Message App
bug ? yes, on principal screen , when you select some message to erase, the check or uncheck no show it. mms ok
The Rom is in 2 parts with self extractor ...
Part 1 ( 650 MB)
[URL="https://mega.co.nz/#!kZUmQS5C!1dk5-mKmP9qKuSsBb3Ul5WI22i_NXVeLx_QWPnh3Joc"]
parte 1
PArt 2 ( 48 MB)
parte 2
Special thanks to Allucio and Enerztr2005, Giannif by share your super rom .....:good:
Post EDIT: Enox ROM Nor G-Xplotion ROM are not from my properties, it is the hard work to translate from
F4 and Sun2, Enerztr2005 and Allucio (nicknames) are the translate father, this rom have your root on chinensse fórum, never I SAY: G-XEnox is my ROM ....G-XENOX is the best from your rom, only a mixer without any problema (99% works), but it is for all, that have a LG P880
How I install?
- Install LG Official 20D
- Bootloader unlocker
- rooted
- Last CWM Instaled (6.0.4.5)
- Enter In Recovery Mode
- Create a Backup Image
- Wipe data
- Wipe Cache
- format system (warning system)
- format data (warning data)
- format cache (warning cache)
- install zip from sd or external sd ( where have zip file)
- reboot system
- after enter and setting for first time
- Wipe data
- Wipe Cache
- Enjoy
great ! Can be installed from 4.4.4 Kitkat like Enox or I have to install from stock ?
no...
FunkyRasta said:
great ! Can be installed from 4.4.4 Kitkat like Enox or I have to install from stock ?
Click to expand...
Click to collapse
you nee install a official 20d ... clear install .. without problems ....
i install first time from 20B and i have problems with com.google.core ...
Seems to me that you are Italian...
Don't forget to mention Giannif for his great work...
No ... I am Venezuelan, default language is spanish ...
renzetti.s said:
Seems to me that you are Italian...
Don't forget to mention Giannif for his great work...
Click to expand...
Click to collapse
you can change the language default, change the build.prop, language default = EN and región GB ...
What Version Of Gxploison Is This.?
You're not allowed to use GXplosion'mods on your personal rom! Please remove!
Note: All Stock ROM
All Stock Rom To LG p880 are based on F4 ROM, Xensial Rom, Zaiben ROM and SUN2 ROM, or MOD from LG Optimus G, only the plublisher have translate or add imagen to the LG original APK ( reverse software ).
I no sales or get money with this, only i share a zip file with all xda community,
Allucio and Enerztr2005 and Giannif are a great developerts or ROM Maker ( ), and your work translate the F4 rom or sun2 rom ( from other developerts ) is amazing ..... :fingers-crossed:, and believed nothing rom mod have a copyright.
thanks for read me.
What Is Sun2?
Sun2, F4. D15 are a few roms from a chinese (?) forum
They did a great job of mixing stuff before it was cool :b
i can't install this rom...md5 error
any one can not install?
shadowfler said:
i can't install this rom...md5 error
Click to expand...
Click to collapse
I test the zip file, cwm recovery touch 6.0.4.5, are ok
im on TWPR
---------- Post added at 11:07 PM ---------- Previous post was at 11:06 PM ----------
Enox Reloaded V2 works and any more
sorry...
shadowfler said:
im on TWPR
---------- Post added at 11:07 PM ---------- Previous post was at 11:06 PM ----------
Enox Reloaded V2 works and any more
Click to expand...
Click to collapse
I upload a zip rom file from cwm format, no general zip to flash
Yeah I kinda figured that out when TWRP returned me an error a second after flashing....
Tks
armageddon_ve said:
I test the zip file, cwm recovery touch 6.0.4.5, are ok
Click to expand...
Click to collapse
mee tooo
i have only bootloop after flash
shadowfler said:
i can't install this rom...md5 error
Click to expand...
Click to collapse
me 2
OK
shadowfler said:
i have only bootloop after flash
Click to expand...
Click to collapse
Do you make all wipes?
Do you make step to step to install?
You are the first that report boot loop problem.
remember...
@stronaud said:
me 2
Click to expand...
Click to collapse
You need install cwm recovery....
In other forum have no problem to install and run..
Thank for try it.
New recovery is here with in-built nvram backup/restore plus rainbow effect support
Just a CWM Based Recovery with awesome feature such as rainbow effect,nvram backup/restore, others find yourself
Installation:: Same as all recoveries
Info:: If recovery automatically reboots press vol + button simultaneously to boot into Boot Menu then Select recovery mode Carliv will boot and it will work normally.
Download Home::
Bugs fixed!! Carliv recovery is now stable
Download here
Credits::
A special thank to the below, and ALL who I do not mention but did contribute a lot with their efforts
@carliv for his recovery and easy guide
@karan1038 for his support
Me for porting this recovery
XDA : DevDB Information
Carliv Touch - ClockworkMod Based Recovery,
Tool/Utility for the Android General
Contributors:
@Swapnil Solanki
Version Information:
Status: V1
Created 2014-12-06
Please Press thanks button if you like my work
Reserved
Hangs and reboots if I try to change any setting, for example enable rainbow mode ,etc.
Sent from my A1 using XDA Free mobile app
akhil1999 said:
Hangs and reboots if I try to change any setting, for example enable rainbow mode ,etc.
Sent from my A1 using XDA Free mobile app
Click to expand...
Click to collapse
Not happening in my phone but I'll check it out for that thnx for reporting
Nice work #Swapnil Solanki ! BTW I'll try it today and report you!:good::good:
Shreeshu10 said:
Nice work #Swapnil Sonlanki ! BTW I'll try it today and report you!:good::good:
Click to expand...
Click to collapse
Thanks shreeshu!! Report me the bugs for sure!!
:good::good::good: its Carvil Touch OR Carliv Touch Recovery
harsh0143 said:
:good::good::good: its Carvil Touch OR Carliv Touch Recovery
Click to expand...
Click to collapse
Carliv Touch Recovery
Bugs fixed!! Carliv recovery is now stable
Download here
Press thanks
Swapnil Solanki said:
Carvil Touch Recovery
Click to expand...
Click to collapse
Actually it's Carliv not Carvil You misspelled my username. Please correct in title and in your posts.
Thanks!
PS: about rebooting issue, after you test the new version, I want to see if that still happens.
carliv said:
Actually it's Carliv not Carvil You misspelled my username. Please correct in title and in your posts.
Thanks!
PS: about rebooting issue, after you test the new version, I want to see if that still happens.
Click to expand...
Click to collapse
Sorry for the misspelling.. is new version available now
Swapnil Solanki said:
Sorry for the misspelling.. is new version available now
Click to expand...
Click to collapse
No problem.
It's available for build from source now, and it will be available for porting in one-two days (I'm finishing now the port builds - I have 45 left x 20 min).
Cheers!
carliv said:
No problem.
It's available for build from source now, and it will be available for porting in one-two days (I'm finishing now the port builds - I have 45 left x 20 min).
Cheers!
Click to expand...
Click to collapse
When it will we available notify me! I'll port it!!
Great work
---------- Post added at 10:58 AM ---------- Previous post was at 10:56 AM ----------
Post some pics
Devam03 said:
Great work
---------- Post added at 10:58 AM ---------- Previous post was at 10:56 AM ----------
Post some pics
Click to expand...
Click to collapse
Thnx! Screenshots will be posted soon when I'll get free time! Carliv 3.0 coming soon!
Keep thanking! My work will continue for Sprout!
:good:
I'm ZR user, not DEV
If you are ZR user and use my port rom, please post any question in ZR topic, don't post in Z topic
Validus rom :
New: Validus_5.1.1_V8_20150607 port
http://forum.xda-developers.com/showpost.php?p=61353871&postcount=149
Old:
Validus_8.0_2015.05.07 port from @Alx31TLse ;
http://forum.xda-developers.com/showpost.php?p=60685073&postcount=120
Validus Rom v8.0-2015-04-22 port from @Alx31TLse :
http://forum.xda-developers.com/showpost.php?p=60317689&postcount=105
Resurrection Remix Rom:
New:
RR_Remix_5.4.4_2015.05.11_EvoMix-KMA port from @airlessproject
link: http://forum.xda-developers.com/showpost.php?p=60686891&postcount=121
OLD:
RR_v5.4.2_20150424 port from @airlessproject
Link: https://drive.google.com/file/d/0B-hTXkqVcs2Wb1NzNWVac3ktQ2c/view?usp=sharing
v5.4.1_20150411: http://forum.xda-developers.com/showpost.php?p=60075712&postcount=89
- Wipe all (dirty flash from 5.4.0 need test)
- Flash rom, gapps 5.1 and superSU
Old:
Resurrection Remix 5.4.0 (Lollipop 5.1) with EVOMIX kernel port from Yuga:
1. Link:
- TWRP 2.8.6.0: https://drive.google.com/file/d/0B-hTXkqVcs2WanFLT0ZqN1pjTU0/view?usp=sharing
- Rom RR_5.4.0: https://drive.google.com/file/d/0B-hTXkqVcs2WME5OaERoeTRENjg/view?usp=sharing
- Gapps 5.1: https://drive.google.com/file/d/0B-hTXkqVcs2WWU5ESzJYNm53YTA/view?usp=sharing
- SuperSU v2.4.6: https://drive.google.com/file/d/0B-hTXkqVcs2WWnI1MUVxVHhRV1U/view?usp=sharing
2. How to flash:
- Reboot to recovery and flash TWRP 2.8.6.0
- Press reboot recovery again: to enter new recovery TWRP 2.8.6.0
- Flash Rom RR_5.4.0 ; Gapps 5.1; superSU v2.4.6
- Reboot phone ...
- Wait for long time ..... (coffee or tea ...)
- Done
3. Known bug:
- Enter recovery by press volume key not working.
Fixed: http://forum.xda-developers.com/showpost.php?p=59923951&postcount=72
- Vibrator intensity not working
- Auto rotate when in landscape bug:
Fixed: Use root explorer and editor some number in system/etc/sensors.conf like below:
# Setup accelerometer axis
bma250input_axis_x = 0
bma250input_axis_y = 1
bma250input_axis_z = 2
bma250input_neg_x = 1
bma250input_neg_y = 0
bma250input_neg_z = 1
# Setup AKM8963 axis
ak896xmagnetic_layout = 0,0,1,0,1,0,-1,0,0
# Setup accelerometer calibration threshold and axis
accel_threshold_first = 250
accel_threshold_second = 50
accel_axis_x = 0
accel_axis_y = 0
accel_axis_z = -1
Save it and reboot. Done.
- Another bugs: You tell me ...
OLD:
Resurrection Remix LP v5.3.7 UNOFFICIAL from Z rom (2015.03.01)
V2: Resurrection remix 5.3.9_20150320
1. Advise: Full wipe before flash rom, gapps, superSUv2.46 (dirty flash will get some apps fc)
link fixed:
https://docs.google.com/file/d/0B-hTXkqVcs2WNkVDOVcyQ0xRZVk/edit?usp=docslist_api
2. Changlog from V5.3.7 to V5.3.9
https://gist.github.com/westcripp/8874051#file-resurrection-remix-changelog
OLD
V1_Resurrection_Remix_LP_v5.3.7_20150301_dogo
1. V1 Changlog:
- Fixed recovery: Rom included TWRP 2.8.5.0 (no more need flash recovery ....)
- Fixed bootanimation of rom fit to our ZR
2. How to flash V1:
- Download rom: V1_Resurrection_Remix_LP_v5.3.7_20150301_dogo zip
link: https://drive.google.com/file/d/0B-hTXkqVcs2WanlUVkNXNWg1Szg/view?usp=sharing
- Download gapps for lollipop zip (google search ..)
- Download superSUv2.46 zip (google search ..)
- Put 3 files to sdcard of ZR
- Flash Rom, flash gapps and flash superSUv2.46
- Reboot. DONE.
Tested
For older rom:
How to flash:
1. Download Resurrection_Remix v5.3.7 rom from link below
https://drive.google.com/file/d/0B-hTXkqVcs2WakprMFRKRzB0cFU/view?usp=sharing
- Download gapps lollipop zip and superSU 2.46 zip and put them into sdcard (use google search ... )
2. Download Philz_touch_recovery.zip (for easy to use and option) and put it to sdcard:
Link: https://drive.google.com/file/d/0B-hTXkqVcs2WYnhQc3pYeU85QlE/view?usp=sharing
3. Flash new rom:
- Reboot to recovery
- Goto : Wipe and format Otions
- Press: Clean to Install a New Rom.
- Flash new rom, gapps, SuperSU 2.46
4. Flash Philz touch recovery
- Install Philz_touch_recovery.zip
5. Reboot phone.
- Done.
6. Bug:
You tell me ...
7. Bootanimation resize fit to ZR
http://forum.xda-developers.com/showpost.php?p=59187027&postcount=7
Special Thanks: @Alx31TLse , @infected_ , @xenius9 , @Noel Macwan , @airlessproject for dev :highfive:
Welcome
nice post. but can you tell me this build is Resurrection_Remix_LP_v5.3.7-20150302 and i see original thread no any build ni Resurrection_Remix_LP_v5.3.7_20150301 so please this is build with new EvoMix custom kernel ????
Just installed. So far is amazing. Everything working. Will report any bugs. Very polished and many options compared to our other LP roms (except boot animation wrong size). I was on CM12 and wiped everything then installed as instructed (but without reinstalling recovery). Bundled recovery is the basic Mokee looking one. Wil try reflash TWRP.
Thank you very much.
EDIT: It reflashes recovery with rom so I reinstalled Philz via terminal app (as per method 1 instructions) after ROM install.
---------- Post added at 11:59 AM ---------- Previous post was at 11:16 AM ----------
vaja_dinesh2006 said:
nice post. but can you tell me this build is Resurrection_Remix_LP_v5.3.7-20150302 and i see original thread no any build ni Resurrection_Remix_LP_v5.3.7_20150301 so please this is build with new EvoMix custom kernel ????
Click to expand...
Click to collapse
Kernel is listed as 3.4.0-cm-gb3d8369 [email protected] #1 Feb 21 11:56:47 EST 2015
dannyglover said:
Just installed. So far is amazing. Everything working. Will report any bugs. Very polished and many options compared to our other LP roms (except boot animation wrong size). I was on CM12 and wiped everything then installed as instructed (but without reinstalling recovery). Bundled recovery is the basic Mokee looking one. Wil try reflash TWRP.
Thank you very much.
EDIT: It reflashes recovery with rom so I reinstalled Philz via terminal app (as per method 1 instructions) after ROM install.
---------- Post added at 11:59 AM ---------- Previous post was at 11:16 AM ----------
Kernel is listed as 3.4.0-cm-gb3d8369 [email protected] #1 Feb 21 11:56:47 EST 2015
Click to expand...
Click to collapse
Yes! Flash recovery via FOTA before or after flash rom is ok, but this menthod only guided to some one with no experience
I think philz touch is easy and more options to use
Thanks!
vaja_dinesh2006 said:
nice post. but can you tell me this build is Resurrection_Remix_LP_v5.3.7-20150302 and i see original thread no any build ni Resurrection_Remix_LP_v5.3.7_20150301 so please this is build with new EvoMix custom kernel ????
Click to expand...
Click to collapse
No new EvoMix custom kernel. Would you port or build kernel to our ZR? I try to port kernel but unsuccessful
New resize boot animation
- copy this file to /system/media overwrite old file
- set permissions: rw-r--r--
- reboot
@uncomment, this rom is not prerooted??
kash296 said:
@uncomment, this rom is not prerooted??
Click to expand...
Click to collapse
Half root
Sent from my Xperia ZR using XDA Free mobile app
Add updater script push twrp recovery img so does not require flashing recovery each time
Thank you for the ROM I will check it out!
Sent from my Xperia ZR using XDA Free mobile app
How do you do it?
I flashed recovery via FOTA once and now not need flash it again
Sent from my Xperia ZR using XDA Free mobile app
uncomment said:
How do you do it?
I flashed recovery via FOTA once and now not need flash it again
Sent from my Xperia ZR using XDA Free mobile app
Click to expand...
Click to collapse
Downloading :thumbup:
Sorry for quoting.Didn't mean it :screwy:
Tapped from my furious ZR
@uncomment perfect port bro. Cheers
Tks for your port @uncomment !
I had a problem with FOTA Kernel but what happen if I use TWRP ?
tonytee said:
Tks for your port @uncomment !
I had a problem with FOTA Kernel but what happen if I use TWRP ?
Click to expand...
Click to collapse
No problem, you can use TWRP or CMW cause recovery inside boot.img not good
Sent from my Xperia ZR using XDA Free mobile app
After flashed it,now I cant use recovery (CWM & TWRP)
I tried menthod 2 but it failed.
Sry my bad english!
tonytee said:
After flashed it,now I cant use recovery (CWM & TWRP)
I tried menthod 2 but it failed.
Sry my bad english!
Click to expand...
Click to collapse
Use Xperia Recovery Manager to push the recovery in FotaKernel partition :fingers-crossed:
V1 Resurrection_Remix_LP_v5.3.7_20150301 uploading .....
uncomment said:
V1 Resurrection_Remix_LP_v5.3.7_20150301 uploading .....
Click to expand...
Click to collapse
Changelog??
Tapped from my furious ZR
V1_Resurrection_Remix_LP_v5.3.7_20150301_dogo
1. Changlog:
- Fixed recovery: Rom included TWRP 2.8.5.0 (no more need flash recovery ....)
- Fixed bootanimation of rom fit to our ZR
2. How to flash:
- Download rom: V1_Resurrection_Remix_LP_v5.3.7_20150301_dogo zip
link: https://drive.google.com/file/d/0B-hTXkqVcs2WanlUVkNXNWg1Szg/view?usp=sharing
- Download gapps for lollipop zip (google search ..)
- Download superSUv2.46 zip (google search ..)
- Put 3 files to sdcard of ZR
- Flash Rom, flash gapps and flash superSUv2.46
- Reboot. DONE.
Tested
:good: A2K M9 port Sense7 5.1.1 Stable For i9300:good:
(Please download and flash this ROM if someone was to report the problem . So be modified .)
This is a maintainer thread for the Sense7 Rom made by A2K, build for the i9300.
************************************************** ************************************************** ********************
Important:
*You need at least 3 GB of internal Storage to flash ROM
*To discharge the maximum amount of RAM in ROM:
1-Set Zram on boeffla-configuer app (Tab Misscellaneous1 set Zram To 800M)
2-set Swappiness on boeffla-configuer app (Tab Misscellaneous1 Set to 60)
3-set screen off kill,regular kill startup kill to minimum Time on Advanced tas manager app (set on setting App)
************************************************** ************************************************** ********************
Quicklinks
FAQ
************************************************** ************************************************** ********************
Important:
For
Disclaimer:
Code:
************************************************** ****************************************
I take no responsibility for lost data, broken devices or anything else you encountered
during/after flashing this ROM.
You are responsible for what you are using on your devices!
Do some research before doing anything and always make sure to have a backup!
************************************************** ****************************************
Downloads
Mod Edit link removed
************************************************** ************************************************** ********************
Xposed (Correction Link)
Apk: https://mega.nz/#!PoUlmBDL!GDWu-FseeKV0mwX_nPOoumx8gwfge7DmhOBBIPTlIRQ
Zip: https://mega.nz/#!jtNmlCQL!TMiNaFd7gh0Ri9Xj6S1Tme2RCPOfpOeJ-Ythv51U4OY
After Flash zip Xposed SDK With Recovery ,Boot will take 4 minutes
main: Mega Host
mirror:N/A
Recommended Gapps: You will not need install Gapps.Gapps automatically Flash With Rom.
Recovery: TWRP official, TWRP unofficial
************************************************** ************************************************** ********************
Installation:
Clean (e.g. when you come from another ROM):
Download all needed files from Download section
Reboot to recovery
Make a backup!!!
Wipe /system, /data, /cache and if possible internel /sdcard as well
Flash Zip ROM(Rom=Rooted,gapps,Boeffla Kernel,htc appps,Necessary Apps....)
Reboot and have fun Sense 7(simulated)
If You Want install Xposed framework installer on Rom-(1-install xposed version 3-alpha4.apk after Flash xposed V80-sdk22-arm.zip )
************************************************** ************************************************** ********************
Changes:
A2K Rom Mail: [email protected]
************************************************** ************************************************** ********************
Features Rom:
50+... HTC M9 Apps
install Atuomatically apps :zapya,xplore,Firefox,ADM,Advanced Task Manager.....
Kernel :boeffla Kernel last version
Double touch to wake (Set On Boeffla configer this Rom)
Zram Maximum 800m
Double touch to sleep Statu bar
Full Work Sense Toolbox With Tweaak 100 Modules Sense Rom (Before install Xposed framework installer)
Full Work Themes Sense launcher And Edit
Full Work All Widget Sense 7
And ....
************************************************** ************************************************** ********************
Credits and big thanks to:
Arsham Delavari
Lord Boeffla for Boeffla Kernel& Sound Mod and Charge Levels
************************************************** ************************************************** ********************
ROM OS Version: 5.1.1 Lollipop
ROM Kernel: Linux 3.0.x
Based On:-------
Version Information
Status: Beta
Current Beta Version:3.6
Created 2016-02-11
Last Updated 2016-02-19
************************************************** ************************************************** ********************
Screen Shot :
http://uploads.im/WZ0lh.png
http://uploads.im/oRXAV.png
http://uploads.im/w6EmT.png
http://uploads.im/TlvHO.png
http://uploads.im/xeadq.png
http://uploads.im/Mc8wO.png
http://uploads.im/yrTa6.png
http://uploads.im/0JAxV.png
http://uploads.im/6Vcjv.png
@arsham1366 xposed two mega links are asking for decryption key, can please help?
thanks for your hard work. downloading them now
update: downloaded, combined. MD5 01BD9B295B34FF0116C40FAF76F09708. will flash later
why the rom is in 5 parts?
gabimx said:
why the rom is in 5 parts?
Click to expand...
Click to collapse
normally it's because of slow/unstable internet speed.
smaller parts uploading is better than restarting the full 813mb if disconnection happens
are you have video demo this rom
guide install or test Antutu, plz
gabimx said:
why the rom is in 5 parts?
Click to expand...
Click to collapse
OK.checked link.I will link change to 5 minutes
Sorry.I'm problem to speak english
hansonchen said:
@arsham1366 xposed two mega links are asking for decryption key, can please help?
thanks for your hard work. downloading them now
update: downloaded, combined. MD5 01BD9B295B34FF0116C40FAF76F09708. will flash later
Click to expand...
Click to collapse
Correction Link.link ready download
hansonchen said:
normally it's because of slow/unstable internet speed.
smaller parts uploading is better than restarting the full 813mb if disconnection happens
Click to expand...
Click to collapse
i'm live to iran.iran low speed upload intenet .sorry
How should this be flashed?
You can't flash RAR in TWRP!
Trafalgar Square said:
How should this be flashed?
You can't flash RAR in TWRP!
Click to expand...
Click to collapse
if you'd have read the OP, you will understand.
"Downloads
This Is Rom 5 Part.After Downloaded 5 Part ,copy 5 Part to folder & Open part 1 With Win rar & Extract zip Rom.
(Size Rom: 813 MB)"
the rar files combine up will have a zip file nside
What do I use to combine the rar files? (Android)
Sent from my GT-I9300 using Tapatalk
Yes, I already read it, but if I extract it via WinRAR or 7ZIP, I am getting an Error. RAR file corrupt.
arsham1366 said:
i'm live to iran.iran low speed upload intenet .sorry
Click to expand...
Click to collapse
i know @arsham1366, just explaining to gabimx.
i've same slow internet in my country too last time. so i know why big files are splitted up then combine again
---------- Post added at 09:08 PM ---------- Previous post was at 09:05 PM ----------
Trafalgar Square said:
Yes, I already read it, but if I extract it via WinRAR or 7ZIP, I am getting an Error. RAR file corrupt.
Click to expand...
Click to collapse
use winrar, it will show which part is corrupt.
just double click part1 then it will automatically combine. then unzip the single zip file to any folder on your pc
---------- Post added at 09:09 PM ---------- Previous post was at 09:08 PM ----------
snkmv said:
What do I use to combine the rar files? (Android)
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
use your pc & winrar to combine & extract the file
---------- Post added at 09:14 PM ---------- Previous post was at 09:09 PM ----------
i'm uploading to my mega then post the single extracted file link here
Trafalgar Square said:
How should this be flashed?
You can't flash RAR in TWRP!
Click to expand...
Click to collapse
first step: download ever 5 part
secound step:copy ever 5 part on folder after open A2K M9 Full port v3.6.part1.rar with winrar
next step select extract (on winrar app) zip rom (AA2K M9 Full Port v3.6.zip)
copy zip rom to phone
enter Twrp (recovery mode) and full wipe (cache ,devile cache,system , data)
flash zip rom
You cant add to rom pro version of apps (mx player pro and titanium backup pro)
Trafalgar Square said:
Yes, I already read it, but if I extract it via WinRAR or 7ZIP, I am getting an Error. RAR file corrupt.
Click to expand...
Click to collapse
no.I got tested again-test without problem
Maybe bad download file.open each file with winrar and right click on zip rom click repair archive .good lock:good:
kakalko4 said:
You cant add to rom pro version of apps (mx player pro and titanium backup pro)
Click to expand...
Click to collapse
Trafalgar dear.
are you download rom?no problem?
arsham1366 said:
Trafalgar dear.
are you download rom?no problem?
Click to expand...
Click to collapse
No, I won't download if there are pro apps included. Thread reported
Such small issue acting so righteous. @arsham1366 I'll remove ADM, mx player, netguard & titanium backup from the rom & help upload again to mega
Maybe you should read the forum rules. Don't post pro versions of a APP in a ROM. If you registered here, you accepted the rules:
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit members to request, post, promote or describe ways in which warez, cracks, serial codes or other means of avoiding payment, can be obtained or used. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community.
Click to expand...
Click to collapse
http://forum.xda-developers.com/announcement.php?f=1566