hi guys
have some problem here and it s serious
so my man locked the bootloader with a tutorial from a Moto g and write wrong
locked the bootloader then flash it the system then erases the userdata and all cache etc
so no recovery,no boot.
now when is trying to unlock the bootloader says OEM allowed unlock or something similar
i was trying to flash 4..4.4 RETBR but got some errors
bootloader invalid sytem img
bootloader invalid prefailed flash
how can i make it work?
the phone stays in fastboot always
can t boot to recovery
please some help here
i was thinking 3 solutions.
unlocking the bootloader but how?
waiting for Lollipop img
or calling Motorola to unlock the bl
thank u
why would you relock your bootloader?
solution its simple, if you dont want to unlock it again, use rsd lite 6.2.9 and flash the firmware from the country of your moto maxx, if its a mexican moto maxx flash mexico ,if its puerto rico, PR or if its brasil, then brasil. you can flash them, those are flasheable with locked bootloader because they are signed, just the one where your phone was
Jaocagomez said:
why would you relock your bootloader?
solution its simple, if you dont want to unlock it again, use rsd lite 6.2.9 and flash the firmware from the country of your moto maxx, if its a mexican moto maxx flash mexico ,if its puerto rico, PR or if its brasil, then brasil. you can flash them, those are flasheable with locked bootloader because they are signed, just the one where your phone was
Click to expand...
Click to collapse
But RSD doesnt recognize the phone
guivalli said:
But RSD doesnt recognize the phone
Click to expand...
Click to collapse
You need your phone on fastboot and use rsd 6.2.4
Jaocagomez said:
You need your phone on fastboot and use rsd 6.2.4
Click to expand...
Click to collapse
Yes!! rsd 6.2.4 recognize!
But result fail gpt.bin
---------- Post added at 04:33 AM ---------- Previous post was at 03:48 AM ----------
guivalli said:
Yes!! rsd 6.2.4 recognize!
But result fail gpt.bin
Click to expand...
Click to collapse
i replace gpt.bin than lollipop OTA and its ok!
but fail in boot.img, recovery.img and system.img_sp...0,1,2,3,4 fail too
guivalli said:
Yes!! rsd 6.2.4 recognize!
But result fail gpt.bin
---------- Post added at 04:33 AM ---------- Previous post was at 03:48 AM ----------
i replace gpt.bin than lollipop OTA and its ok!
but fail in boot.img, recovery.img and system.img_sp...0,1,2,3,4 fail too
Click to expand...
Click to collapse
Please don't do that, lollipop it's supposed to install via recovery and not thru fastboot, please check that you downloaded the retail version of your Moto maxx and not carrier one.
Jaocagomez said:
Please don't do that, lollipop it's supposed to install via recovery and not thru fastboot, please check that you downloaded the retail version of your Moto maxx and not carrier one.
Click to expand...
Click to collapse
i tired both and same errors
before that problem in my moto, i was in lollipop...
do u think thats the problem?
guivalli said:
i tired both and same errors
before that problem in my moto, i was in lollipop...
do u think thats the problem?
Click to expand...
Click to collapse
First things first, it's your Moto maxx from mexico, puerto rico or Brasil?
Jaocagomez said:
First things first, it's your Moto maxx from mexico, puerto rico or Brasil?
Click to expand...
Click to collapse
Brasil
guivalli said:
Brasil
Click to expand...
Click to collapse
It's retail version or from claro or another company?
Jaocagomez said:
It's retail version or from claro or another company?
Click to expand...
Click to collapse
Retail
guivalli said:
Retail
Click to expand...
Click to collapse
Download this firmware and then flash it with rsd lite
https://mega.co.nz/#!KtYX2A7S!LTexE6weRap6e2g9l_ve8aBdShW-sGMpp2ZI4-xT_EA
Jaocagomez said:
Download this firmware and then flash it with rsd lite
https://mega.co.nz/#!KtYX2A7S!LTexE6weRap6e2g9l_ve8aBdShW-sGMpp2ZI4-xT_EA
Click to expand...
Click to collapse
i tried this one...
Failed everytime... i think its cause i used a Lolli before
guivalli said:
i tried this one...
Failed everytime... i think its cause i used a Lolli before
Click to expand...
Click to collapse
Then you have to manually flash all the files with fastboot, unzip all the contents to your fastboot folder and flash them one by one let me look for the fastboot commands
Jaocagomez said:
Then you have to manually flash all the files with fastboot, unzip all the contents to your fastboot folder and flash them one by one let me look for the fastboot commands
Click to expand...
Click to collapse
Jaocagomez,
i tried flash manual, 2danger try to me too
But with bootloader locked + impossible unlock cause lolli demand check one option in settings to unlock... all failed
guivalli said:
Jaocagomez,
i tried flash manual, 2danger try to me too
But with bootloader locked + impossible unlock cause lolli demand check one option in settings to unlock... all failed
Click to expand...
Click to collapse
You flash those files in fastboot mode, lollipop has nothing to do with it
This is fastboot mode:
http://forum.xda-developers.com/showthread.php?t=3011311
Jaocagomez said:
You flash those files in fastboot mode, lollipop has nothing to do with it
This is fastboot mode:
http://forum.xda-developers.com/showthread.php?t=3011311
Click to expand...
Click to collapse
Yes, my Moto doesnt exit fastboot mode
guivalli said:
Yes, my Moto doesnt exit fastboot mode
Click to expand...
Click to collapse
Do you have android sdk installed on your pc? You need that to flash without rsd
Jaocagomez said:
Do you have android sdk installed on your pc? You need that to flash without rsd
Click to expand...
Click to collapse
I have fastboot, mfastboot, adb... everything =/
guivalli said:
I have fastboot, mfastboot, adb... everything =/
Click to expand...
Click to collapse
ok unzip all the contents of firmware you downloaded on the fastboot folder.
using cmd write
Code:
fastboot devices
if a device show with any code like d654654
then your phone its detected
after that write this in cmd:
you can copy and paste it:
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot bootloader.img
fastboot flash radio radio.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
fastboot erase cache
fastboot erase userdata
fastboot erase clogo
fastboot oem fb_mode_clear
and your phone will work.
Related
Hello anyone! I'm looking for some help.
My phone was running android 4.4.2, then i modified the buil.prop for increasing the display density & my phone got off, then i tried and tried and tried turn it on, then i did it & i fash my stock rom (for XT1058 america movil MX) the OTA told me about the update & i accept it... Well my phone now is in fastboot & he says this (yep ''he'' LOL):
downgraded security version
update gpt_maim¡n version failed
Failed to check for gpt_backup: 0x35
CID Read failure
Invalid CID status 0x69
Customer ID eroor. Contact dealer: 0xdead
No SP partition found
Fastboot reason: Invalid CID
Well, i wish someone could help me, i don't want to have a beautiful $400 paperweight, thanks a lot XDA
TUESONER said:
Hello anyone! I'm looking for some help.
My phone was running android 4.4.2, then i modified the buil.prop for increasing the display density & my phone got off, then i tried and tried and tried turn it on, then i did it & i fash my stock rom (for XT1058 america movil MX) the OTA told me about the update & i accept it... Well my phone now is in fastboot & he says this (yep ''he'' LOL):
downgraded security version
update gpt_maim¡n version failed
Failed to check for gpt_backup: 0x35
CID Read failure
Invalid CID status 0x69
Customer ID eroor. Contact dealer: 0xdead
No SP partition found
Fastboot reason: Invalid CID
Well, i wish someone could help me, i don't want to have a beautiful $400 paperweight, thanks a lot XDA
Click to expand...
Click to collapse
try to flash with mfastboot the recovery from 4.4.2 the FIRMWARE U HAVE IT FIRST
MUST BE THE SAME VERSION THAT U HAVE FIRST THAT UR PHONE BRICKED
after u flash the recovery,reboot bootloader and try to flash all firmware
TUESONER said:
Hello anyone! I'm looking for some help.
My phone was running android 4.4.2, then i modified the buil.prop for increasing the display density & my phone got off, then i tried and tried and tried turn it on, then i did it & i fash my stock rom (for XT1058 america movil MX) the OTA told me about the update & i accept it... Well my phone now is in fastboot & he says this (yep ''he'' LOL):
downgraded security version
update gpt_maim¡n version failed
Failed to check for gpt_backup: 0x35
CID Read failure
Invalid CID status 0x69
Customer ID eroor. Contact dealer: 0xdead
No SP partition found
Fastboot reason: Invalid CID
Well, i wish someone could help me, i don't want to have a beautiful $400 paperweight, thanks a lot XDA
Click to expand...
Click to collapse
You had 4.4.2 on your phone, I'm betting the "stock rom" you had then tried flashing was 4.4 or lower.
As danger2u said, the first thing you'll want to try is to flash the ROM for your phone. Since you had 4.4.2 on there, you'll need to find the 4.4.2 SBF for your carrier (I don't see american movil mx listed on -> http://sbf.droid-developers.org/phone.php?device=0 ), and flash it.
If that doesn't work, you'll want to see this thread -> http://forum.xda-developers.com/moto-x/general/tut-resurrecting-bricked-moto-x-corrupt-t2629057 It too requires you have the correct ROM for your device
If you manage to get it working.. DO NOT DOWNGRADE YOUR ROM!!!!! (i.e. once on 4.4.2 do NOT flash 4.4 or below!!!!)
KidJoe said:
You had 4.4.2 on your phone, I'm betting the "stock rom" you had then tried flashing was 4.4 or lower.
As TUESONER said, the first thing you'll want to try is to flash the ROM for your phone. Since you had 4.4.2 on there, you'll need to find the 4.4.2 SBF for your carrier (I don't see american movil mx listed on -> TUESONER ), and flash it.
If that doesn't work, you'll want to see this thread -> http://forum.xda-developers.com/moto-x/general/tut-resurrecting-bricked-moto-x-corrupt-t2629057 It too requires you have the correct ROM for your device
If you manage to get it working.. DO NOT DOWNGRADE YOUR ROM!!!!! (i.e. once on 4.4.2 do NOT flash 4.4 or below!!!!)
Click to expand...
Click to collapse
I got my phone with 4.2.2 out of the box, then i recivied the 4.4.2 via OTA, at&t us have the XT1058, would i install the rom on 4.4 fot at&t then flash the modem?
TUESONER said:
I got my phone with 4.2.2 out of the box, then i recivied the 4.4.2 via OTA, at&t us have the XT1058, would i install the rom on 4.4 fot at&t then flash the modem?
Click to expand...
Click to collapse
No. If you received 4.4.2 OTA... you need to flash 4.4.2. do NOT flash 4.4.
Due to changes in 4.4.2, you either will brick, or set yourself up to brick if you try to downgrade your rom version... i.e. 4.4.2 -> 4.4 will brick or set you up for it.
Were you running an ATT ROM on your phone? or something else?
KidJoe said:
No. If you received 4.4.2 OTA... you need to flash 4.4.2. do NOT flash 4.4.
Due to changes in 4.4.2, you either will brick, or set yourself up to brick if you try to downgrade your rom version... i.e. 4.4.2 -> 4.4 will brick or set you up for it.
Were you running an ATT ROM on your phone? or something else?
Click to expand...
Click to collapse
I'm wrong, i wanted to write 4.4.2. I was running my stock rom, america movil 4.2.2, recivied the OTA for 4.4.2, in the page of firmwares i can´t find the firmware for america movil 4.4.2, probabbly it doesn´t exist, so, can i flash the rom for the at&t XT1058, then i got the modem for my carrier flashed?
TUESONER said:
I'm wrong, i wanted to write 4.4.2. I was running my stock rom, america movil 4.2.2, recivied the OTA for 4.4.2, in the page of firmwares i can´t find the firmware for america movil 4.4.2, probabbly it doesn´t exist, so, can i flash the rom for the at&t XT1058, then i got the modem for my carrier flashed?
Click to expand...
Click to collapse
I don't know the differences in the ATT Rom vs America Movil... I know the ATT rom has a lot of bloat.
I don't think the ATT 4.4.2 SBF was leaked yet (it wasn't when i looked earlier)...
TUESONER said:
I'm wrong, i wanted to write 4.4.2. I was running my stock rom, america movil 4.2.2, recivied the OTA for 4.4.2, in the page of firmwares i can´t find the firmware for america movil 4.4.2, probabbly it doesn´t exist, so, can i flash the rom for the at&t XT1058, then i got the modem for my carrier flashed?
Click to expand...
Click to collapse
the only Movil 4.4.2 is this
http://sbf.droid-developers.org/download.php?device=0&file=835
so i think u have this version of firmware on 4.2.2
download it
extract firmware
flash only the recovery
reboot bootloader
then flash entire rom
let us know
KidJoe said:
You had 4.4.2 on your phone, I'm betting the "stock rom" you had then tried flashing was 4.4 or lower.
As danger2u said, the first thing you'll want to try is to flash the ROM for your phone. Since you had 4.4.2 on there, you'll need to find the 4.4.2 SBF for your carrier (I don't see american movil mx listed on -> TUESONER ), and flash it.
If that doesn't work, you'll want to see this thread -> http://forum.xda-developers.com/moto-x/general/tut-resurrecting-bricked-moto-x-corrupt-t2629057 It too requires you have the correct ROM for your device
If you manage to get it working.. DO NOT DOWNGRADE YOUR ROM!!!!! (i.e. once on 4.4.2 do NOT flash 4.4 or below!!!!)
Click to expand...
Click to collapse
This ^^
If you downgraded and then took an ota, that usually leads to a brick. Read the thread kid Joe posted and hopefully you can recover.
Good luck!
Oh, and as said....the best moto x advice there is, is once on 4.4.2.....stay on 4.4.2. Unfortunately.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
Thanks anyone for the suport, tomorrow imma try with that rom, i'm reall tired today, was a lng day at my work, i will post the results, again, thanks everyone, wait for my post tomorow.
TUESONER said:
Thanks anyone for the suport, tomorrow imma try with that rom, i'm reall tired today, was a lng day at my work, i will post the results, again, thanks everyone, wait for my post tomorow.
Click to expand...
Click to collapse
kj2112 said:
This ^^
If you downgraded and then took an ota, that usually leads to a brick. Read the thread kid Joe posted and hopefully you can recover.
Good luck!
Oh, and as said....the best moto x advice there is, is once on 4.4.2.....stay on 4.4.2. Unfortunately.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
Click to expand...
Click to collapse
danger2u said:
the only Movil 4.4.2 is this
xxx
so i think u have this version of firmware on 4.2.2
download it
extract firmware
flash only the recovery
reboot bootloader
then flash entire rom
let us know
Click to expand...
Click to collapse
It did't work at all, i flashed the recovery then the entire rom, now thce cellphone turn on, then i see the message of the unlocked bootloader, then the screen goes black & for something like half second i see the image of andy (the android caracter) & the legend ''updating'' then another image for half second or less that says ''error''
The rom has flashed correctly, i can enter in fastboot mode too
TUESONER said:
It did't work at all, i flashed the recovery then the entire rom, now thce cellphone turn on, then i see the message of the unlocked bootloader, then the screen goes black & for something like half second i see the image of andy (the android caracter) & the legend ''updating'' then another image for half second or less that says ''error''
The rom has flashed correctly, i can enter in fastboot mode too
Click to expand...
Click to collapse
flash it manually
try another firmware that is 4.4.2 and compatible with ur country and operator
now if turns on is no more bricked. u are on the good way
danger2u said:
flash it manually
try another firmware that is 4.4.2 and compatible with ur country and operator
now if turns on is no more bricked. u are on the good way
Click to expand...
Click to collapse
flash manually? that's with fastboot or mfastboot? what comands do i need to use?
TUESONER said:
flash manually? that's with fastboot or mfastboot? what comands do i need to use?
Click to expand...
Click to collapse
mfastboot
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear
danger2u said:
mfastboot
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear
Click to expand...
Click to collapse
Careful.. That is an example for Verizon. It might not match the XML that is in whatever rom TUESONER is trying to flash on an XT1058.
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
TUESONER said:
flash manually? that's with fastboot or mfastboot? what comands do i need to use?
Click to expand...
Click to collapse
First off, which SBF are you trying to flash? is it 4.4.2 or 4.4?
Past or attach the XML which is inside the SBF you are using. We'll help you convert it to the correct series of mFastboot commands.
KidJoe said:
Careful.. That is an example for Verizon. It might not match the XML that is in whatever rom TUESONER is trying to flash on an XT1058.
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
First off, which SBF are you trying to flash? is it 4.4.2 or 4.4?
Past or attach the XML which is inside the SBF you are using. We'll help you convert it to the correct series of mFastboot commands.
Click to expand...
Click to collapse
he can pass the comand
mfastboot oem config carrier vzw
it works without this too
KidJoe said:
Careful.. That is an example for Verizon. It might not match the XML that is in whatever rom TUESONER is trying to flash on an XT1058.
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
First off, which SBF are you trying to flash? is it 4.4.2 or 4.4?
Past or attach the XML which is inside the SBF you are using. We'll help you convert it to the correct series of mFastboot commands.
Click to expand...
Click to collapse
i will use this one, i erased the line of ''max download size''
TUESONER said:
i will use this one, i erased the line of ''max download size''
Click to expand...
Click to collapse
Is that the exact 4.4.2 ROM that was on your phone originally? If not, there is a chance this still might not fix you...
Its extremely similar to what @danger2u has already posted.
(based on Moto's web site and the XML you posted) after unzipping the "CLARO-BR_GHOST..." SBF, you'd want to try the following commands from the folder where you unzipped the SFB after booting the phone to fastboot/bootloader mode....
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot reboot
NOTE: by Mfastboot, I mean the Moto modified version of fastboot, not the one that comes with the standard Android SDK/Platform Tools. The moto modified Fastboot.exe can sometimes be found in a windows folder inside an SBF, or you can download from -> http://mark.cdmaforums.com/X-STUFF/Mfastboot-4.4.zip
KidJoe said:
Is that the exact 4.4.2 ROM that was on your phone originally? If not, there is a chance this still might not fix you...
Its extremely similar to what @danger2u has already posted.
(based on Moto's web site and the XML you posted) after unzipping the "CLARO-BR_GHOST..." SBF, you'd want to try the following commands from the folder where you unzipped the SFB after booting the phone to fastboot/bootloader mode....
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot reboot
NOTE: by Mfastboot, I mean the Moto modified version of fastboot, not the one that comes with the standard Android SDK/Platform Tools. The moto modified Fastboot.exe can sometimes be found in a windows folder inside an SBF, or you can download from -> http://mark.cdmaforums.com/X-STUFF/Mfastboot-4.4.zip
Click to expand...
Click to collapse
The ROM isn't the original that was running my phone, i got 4.2.2 out of the box, now i will indtsll thst ROM because is 4.4.2 & i will not brick or have problems, the fastboot that you attached doesn't work with the comands ''mfastboot'' i use just ''fastboot''?
i did it!
GUYS! THANK YOU A LOT! i did it, mi moto X is alive, thanks @KidJoe, @danger2u & @kj2112, you helped me without even knowing me.
I used the comands that @KidJoe gave me, but using just ''fastboot'' everything is working fine, even the 4G connection.
Thanks, really, really thanks... Now i feel i'm a real XDA member & i wish my post help people.
Hello everyone,
i have a XT1092. I am rooted. I heard that I would not be receiving the OTA or getting it to work if I have a custom recovery installed. That is apparently correct as I had a small 12mb update today and I have not been able to flash it . The phone got stuck in a boot loop. Anyways, I am out of the loop now and all is good. I just want to know how do i revert to stock recovery? I am on stock room but the phone is rooted with twrp installed. So do I just need to flash the stock recovery image, if yes then how? or do i need to flash the stock rom all over again, again if yes then please guide me with the same.
Also, can I flash XT1095 images on my device?
Thank you
roddem said:
Hello everyone,
i have a XT1092. I am rooted. I heard that I would not be receiving the OTA or getting it to work if I have a custom recovery installed. That is apparently correct as I had a small 12mb update today and I have not been able to flash it . The phone got stuck in a boot loop. Anyways, I am out of the loop now and all is good. I just want to know how do i revert to stock recovery? I am on stock room but the phone is rooted with twrp installed. So do I just need to flash the stock recovery image, if yes then how? or do i need to flash the stock rom all over again, again if yes then please guide me with the same.
Also, can I flash XT1095 images on my device?
Thank you
Click to expand...
Click to collapse
I do have the exact same problem. I had to do a fullwipe to get out of the bootloop.
PLS help us out guys! I also need to get the stock recovery back for upcoming updates.
This is what i did to take the 12 mb update
Just flash these commands in fastboot
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img_sparsechunk.0
$ fastboot flash system system.img_sparsechunk.1
$ fastboot flash system system.img_sparsechunk.2
$ fastboot flash system system.img_sparsechunk.3
$ fastboot flash system system.img_sparsechunk.4
$ fastboot flash system system.img_sparsechunk.5
$ fastboot flash system system.img_sparsechunk.6
$ fastboot flash system system.img_sparsechunk.7
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot reboot
You also have the option to erase all the data on your device with
$ fastboot erase userdata
$ fastboot erase cache
Just make sure that you type each command one by one
if you update to xt1095 you have to be careful when u downgrade, u might brick your device
While downgrading dont flash the below 3 commands
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
blademaster1990 said:
This is what i did to take the 12 mb update
Just flash these commands in fastboot
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img_sparsechunk.0
$ fastboot flash system system.img_sparsechunk.1
$ fastboot flash system system.img_sparsechunk.2
$ fastboot flash system system.img_sparsechunk.3
$ fastboot flash system system.img_sparsechunk.4
$ fastboot flash system system.img_sparsechunk.5
$ fastboot flash system system.img_sparsechunk.6
$ fastboot flash system system.img_sparsechunk.7
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot reboot
You also have the option to erase all the data on your device with
$ fastboot erase userdata
$ fastboot erase cache
Just make sure that you type each command one by one
if you update to xt1095 you have to be careful when u downgrade, u might brick your device
While downgrading dont flash the below 3 commands
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
Click to expand...
Click to collapse
Thanks a lot for your time. So this would flash the stock recovery? and this all is uncompressed from which file? from where will i get the .imgs and all?
roddem said:
Thanks a lot for your time. So this would flash the stock recovery? and this all is uncompressed from which file? from where will i get the .imgs and all?
Click to expand...
Click to collapse
Go to this page:
http://www.androidgb.com/download-moto-x-2nd-gen-2014-android-5-0-lollipop-factory-image-784/
It should link you to factory image which is a zip file
Unzip the file in the place where you have your adb set up
once u have extracted the file, follow the instructions above
blademaster1990 said:
Go to this page:
http://www.androidgb.com/download-moto-x-2nd-gen-2014-android-5-0-lollipop-factory-image-784/
It should link you to factory image which is a zip file
Unzip the file in the place where you have your adb set up
once u have extracted the file, follow the instructions above
Click to expand...
Click to collapse
awesome. also what if i flash xt1095's image? would that be any beneficial? I guess itll help me get quicker updates. No?
there is a thread where it helps people who want to convert their xt1092 to xt1095.
But be careful when to change to xt1095 you have to backup your radio, since xt 1095 has different radio to ours.
There have been some people complaining about bricking their device while downgrading
Please check and only do it if your really comfortable with flashing
moto x 2nd gen hard bricked-xt1092
hi there my moto x 2nd gen got hard bricked..now i want to recover it..can you please help me....i will pay you if you want....
achchu93 said:
hi there my moto x 2nd gen got hard bricked..now i want to recover it..can you please help me....i will pay you if you want....
Click to expand...
Click to collapse
Nobody here can fix a hard brick. You will have to send it to motorola for repair.
Sent from my XT1095 using Tapatalk
achchu93 said:
hi there my moto x 2nd gen got hard bricked..now i want to recover it..can you please help me....i will pay you if you want....
Click to expand...
Click to collapse
You have only the green light, and no signal or image on you screen?
AGISCI said:
Nobody here can fix a hard brick. You will have to send it to motorola for repair.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
yeah i send it for repair..but they say it doesnt recognize in their power checking machine. they said it has a motherboard fault..but im damn sure it is only a software issue.because when i downgrade it to stock lolipop from cm13 only it happened...can i get blankflash file????
---------- Post added at 12:39 PM ---------- Previous post was at 12:36 PM ----------
cyker31 said:
You have only the green light, and no signal or image on you screen?
Click to expand...
Click to collapse
yeah..only green light when switch on and when i plugged into pc....otherwise no responses from it....
achchu93 said:
yeah i send it for repair..but they say it doesnt recognize in their power checking machine. they said it has a motherboard fault..but im damn sure it is only a software issue.because when i downgrade it to stock lolipop from cm13 only it happened...can i get blankflash file????
---------- Post added at 12:39 PM ---------- Previous post was at 12:36 PM ----------
yeah..only green light when switch on and when i plugged into pc....otherwise no responses from it....
Click to expand...
Click to collapse
Not blankflash files for Victara get (moto x 2014) still has not been made public, for months, users ask for it via officials channels, but there has been no response by Motorola, (Motorola only replace the mother board, both US, EU and South American countries)
only as been released for the nexus moto and the X 2013, but the files don't match
cyker31 said:
Not blankflash files for Victara get (moto x 2014) still has not been made public, for months, users ask for it via officials channels, but there has been no response by Motorola, (Motorola only replace the mother board, both US, EU and South American countries)
only as been released for the nexus moto and the X 2013, but the files don't match
Click to expand...
Click to collapse
U mean then in india they can only change motherboard??? But they are also a service station..then why cant they troubleshoot this???dont they have blankflash file?????
achchu93 said:
U mean then in india they can only change motherboard??? But they are also a service station..then why cant they troubleshoot this???dont they have blankflash file?????
Click to expand...
Click to collapse
Motorola has the blankflash files, we do not have them. They WILL NOT release them. They never have released blankflash files nor will they ever do it in the future. We may get it someday only if it leaks.
So ONLY motorola can fix this.
Sent from my XT1095 using Tapatalk
AGISCI said:
Motorola has the blankflash files, we do not have them. They WILL NOT release them. They never have released blankflash files nor will they ever do it in the future. We may get it someday only if it leaks.
So ONLY motorola can fix this.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Yeah that is why i send it to indian motorola service canter..but they just saying they cant do it...does not motorola release those file to indian service stations?????
achchu93 said:
Yeah that is why i send it to indian motorola service canter..but they just saying they cant do it...does not motorola release those file to indian service stations?????
Click to expand...
Click to collapse
In no country really, Motorola only say »phone is dead» , a leak in this point, would be the only way ( as has happened with other moto phones ) but for now, nothing happened
achchu93 said:
Yeah that is why i send it to indian motorola service canter..but they just saying they cant do it...does not motorola release those file to indian service stations?????
Click to expand...
Click to collapse
I guess they don't have it if they say they can't fix a hard brick.
Sent from my XT1095 using Tapatalk
AGISCI said:
I guess they don't have it if they say they can't fix a hard brick.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
That is the thing.... So have to put this phone in trash????
achchu93 said:
That is the thing.... So have to put this phone in trash????
Click to expand...
Click to collapse
Personally I would save it and hope that one day the blankflash files leak.
Sent from my XT1095 using Tapatalk
Hello need help tracking down stock turbo firmware. The Motofirmware website (http://motofirmware.center/files/category/23-droid-turbo/downloads) are corrupted. The links in this thread are all dead: http://forum.xda-developers.com/moto-maxx/general/quark-stock-firmware-moto-maxx-droid-t3063470. Does anyone know of another source for stock 5.1?
http://motofirmware.center/
Stanleywinthrop said:
Hello need help tracking down stock turbo firmware. Does anyone know of another source for stock 5.1?
Click to expand...
Click to collapse
Here is the file download link for the latest xt1254 droid turbo 5.1 lollipop firmware:
https://www.androidfilehost.com/?fid=24052804347843637
Thanks, jala, but if you had bothered to fully read you'd see that the files on that website are corrupted.
jalal-jap said:
http://motofirmware.center/
Click to expand...
Click to collapse
Thanks, classic, i'll give this a try.
classic757 said:
Here is the file download link for the latest xt1254 droid turbo 5.1 lollipop firmware:
https://www.androidfilehost.com/?fid=24052804347843637
Click to expand...
Click to collapse
Stanleywinthrop said:
Thanks, classic, i'll give this a try.
Click to expand...
Click to collapse
No problem. Please let me know how it turns out.
Stanleywinthrop said:
Thanks, jala, but if you had bothered to fully read you'd see that the files on that website are corrupted.
Click to expand...
Click to collapse
i have same problem. extract it whit "7ZIP" and no corrupted for me.
http://www.rootjunkysdl.com/getdown...o/Firmware/VRZ_XT1254_SU4TL-44_44_CFC.xml.zip -> Full firmware (not OTA) of the most recent version of 5.1
TheSt33v said:
http://www.rootjunkysdl.com/getdown...o/Firmware/VRZ_XT1254_SU4TL-44_44_CFC.xml.zip -> Full firmware (not OTA) of the most recent version of 5.1
Click to expand...
Click to collapse
I get this error:
http://i.imgur.com/EOPsxnB.png
dmginc said:
I get this error:
http://i.imgur.com/EOPsxnB.png
Click to expand...
Click to collapse
Are you using RSDlite? If so, you're getting this error (I think) because the PRODUCT_CONFIGURATION.xml file has instructions for other phone models besides the Turbo in it. If I remember correctly, I got around this by deleting the info for everything not labeled QUARK_VERIZON in this file. However, since RSDlite basically just automates fastboot, a better option is to use fastboot to flash this firmware, in my opinion.
If you decide to flash the firmware this way, place all of the files from the full firmware into the directory that you installed fastboot, and enter the following commands after your phone is plugged into your computer in bootloader mode:
fastboot flash partition gpt.bin
fastboot flash motoboot bootloader.img
fastboot flash radio radio.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
<repeat until all sparsechunks are flashed>
fastboot erase ddr
fastboot erase cache
fastboot erase userdata (NOTE: this command effectively performs a factory reset, and will erase all of your data)
Then boot, and you will have done everything that RSDlite would have done.
Oh thanks. Good info. Is there a write up on using fastboot anywhere? These forums are pretty poorly maintained and no good stickies anywhere
Edit: Oh, you edited your post. Awesome. Thanks.
The root junky fxz is that for rsd lite when I look at the contents the system image is in several sections and says system.img sparsechunk and has 10 sections. I have never seen this in an fxz. Is this a new way of flashing the system image.
TheSt33v said:
Are you using RSDlite? If so, you're getting this error (I think) because the PRODUCT_CONFIGURATION.xml file has instructions for other phone models besides the Turbo in it. If I remember correctly, I got around this by deleting the info for everything not labeled QUARK_VERIZON in this file. However, since RSDlite basically just automates fastboot, a better option is to use fastboot to flash this firmware, in my opinion.
If you decide to flash the firmware this way, place all of the files from the full firmware into the directory that you installed fastboot, and enter the following commands after your phone is plugged into your computer in bootloader mode:
fastboot flash partition gpt.bin
fastboot flash motoboot bootloader.img
fastboot flash radio radio.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
<repeat until all sparsechunks are flashed>
fastboot erase ddr
fastboot erase cache
fastboot erase userdata (NOTE: this command effectively performs a factory reset, and will erase all of your data)
Then boot, and you will have done everything that RSDlite would have done.
Click to expand...
Click to collapse
Is it possible for me to relock my bootloader using adb fastboot? I don't want to do it accidentally while messing around with different roms and wiping my way back to stock.
When in fastboot, type "fastboot oem lock" (without the quotations"
Btrusa said:
When in fastboot, type "fastboot oem lock" (without the quotations"
Click to expand...
Click to collapse
Wouldn't that lock the bootloader?
Is it even possible to re-lock?
From what I understand he wants to avoid locking the bootloader...
Edit: nevermind I looked it up... Should have just done that the first time... ("I have seen quite of few people screw up their devices by not knowing what they are doing. So I am making this thread to simply tell people not familiar with fastboot what they should and should not do.
Fastboot oem unlock will unlock your bootloader and do a complete wipe of your device. As far as I know the only way for something to go wrong here is if you're device is low on battery and shuts off during the process. Either plug it in or have a "good" amount of juice left in your battery. To be 100 percent sure plug it in.
Before I get into oem lock IMHO you should only use this command for one thing only. Getting the device ready to send into motorola for the LGT upgrade or a another warranty repair or some sort. When done properly it is completely safe but there is no reason to do to go back to "stock".
Fastboot oem lock. Do not issue this command unless you are absolutely sure you have the correct software on your device. The correct software is what you get from the motodev site for your device. You need the official sofware images for your specific device AND REGION. If it is not released then DO NOT re-lock the device. If you have a OTA installed you will need to flash back to the motodev images first.")
dmginc said:
Is it possible for me to relock my bootloader using adb fastboot? I don't want to do it accidentally while messing around with different roms and wiping my way back to stock.
Click to expand...
Click to collapse
Nope
So is the fastboot flash motoboot bootloader.img just the Motorola "M" splash screen?
Sent from my XT1254 using Tapatalk
dmginc said:
So is the fastboot flash motoboot bootloader.img just the Motorola "M" splash screen?
Click to expand...
Click to collapse
No, that is the actual bootloader. The code that manages device startup, takes fastboot commands, and prohibits unsigned images from booting (when locked).
The splash screen is flashed with:
fastboot flash logo logo.bin
unhappybirthday said:
No, that is the actual bootloader. The code that manages device startup, takes fastboot commands, and prohibits unsigned images from booting (when locked).
The splash screen is flashed with:
fastboot flash logo logo.bin
Click to expand...
Click to collapse
So, back to my original question. When flashing back to stock with adb, but wanting to keep my bootloader unlocked, what should I do?
dmginc said:
So, back to my original question. When flashing back to stock with adb, but wanting to keep my bootloader unlocked, what should I do?
Click to expand...
Click to collapse
I can only speak from my experience. I was on the KitKat bootloader and used mofo to flash lollipop. I unlocked with sunshine and installed twrp. Then I flashed the lollipop bootloader with the fastboot command . Still unlocked.
Sent from my DROID Turbo using Tapatalk.
Hi all!
Early this year I transformed XT1097 RT Brasil into XT1095 because this one received Android 5.1 before and because I thought that the XT1095 being the Pure version for US was the one that would receive the updates before anybody else.
Well......I was totally wrong. XT1095 hasn't even received the soak 6.0 yet and the XT1097 from Brasil and Mexico, and the Europeans already are enjoying Marshmallow.
So what I want to do is to go back to the 5.1 XT1097 RT Brasil. Searching the web I came with this very easy tutorial but I'm not sure if I will brick my phone since I'm quiet a noob. Please can you let me know if I can do this tutorial safely?: http://motox-brasil.blogspot.cl/2015/06/firmware-motox2-xt1097-firmware-retail.html
Thanks so much in advance.
Cheers!
titotito1983 said:
Hi all!
Early this year I transformed XT1097 RT Brasil into XT1095 because this one received Android 5.1 before and because I thought that the XT1095 being the Pure version for US was the one that would receive the updates before anybody else.
Well......I was totally wrong. XT1095 hasn't even received the soak 6.0 yet and the XT1097 from Brasil and Mexico, and the Europeans already are enjoying Marshmallow.
So what I want to do is to go back to the 5.1 XT1097 RT Brasil. Searching the web I came with this very easy tutorial but I'm not sure if I will brick my phone since I'm quiet a noob. Please can you let me know if I can do this tutorial safely?: http://motox-brasil.blogspot.cl/2015/06/firmware-motox2-xt1097-firmware-retail.html
Thanks so much in advance.
Cheers!
Click to expand...
Click to collapse
There's already a full firmware of Android 6.0 Marshmallow for RETBR XT1097 (File Size 1.4 GB)
https://mega.nz/#!YZIwlQpB!jcwWyvMmNrGHIQ_mF1WT4_MDtbta8voc7eiz_svAbUo
fastboot -w
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot -w
fastboot reboot
---------- Post added at 12:39 PM ---------- Previous post was at 12:23 PM ----------
Extract the zip, then put these four files inside, with the firmware files:
adb.exe
fastboot.exe
AdbWinApi.dll
AdbWinUsbApi.dll
Shift+Right Click, Open command window here
Paste the commands
(You can also paste the commands into Notepad and create a .bat file)
Gus.Ottawa said:
There's already a full firmware of Android 6.0 Marshmallow for RETBR XT1097 (File Size 1.4 GB)
https://mega.nz/#!YZIwlQpB!jcwWyvMmNrGHIQ_mF1WT4_MDtbta8voc7eiz_svAbUo
fastboot -w
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot -w
fastboot reboot
---------- Post added at 12:39 PM ---------- Previous post was at 12:23 PM ----------
Extract the zip, then put these four files inside, with the firmware files:
adb.exe
fastboot.exe
AdbWinApi.dll
AdbWinUsbApi.dll
Shift+Right Click, Open command window here
Paste the commands
(You can also paste the commands into Notepad and create a .bat file)
Click to expand...
Click to collapse
Thanks. The problem I have is that in Win 10 adb doesn't work. But RSD Lite it does. I can flash the 6.0 with RSD? I don't have risk of hard brick doing this right?
titotito1983 said:
Thanks. The problem I have is that in Win 10 adb doesn't work. But RSD Lite it does. I can flash the 6.0 with RSD? I don't have risk of hard brick doing this right?
Click to expand...
Click to collapse
I'm on Win 10 x64; you should install the usb drivers from Motorola so that they show up in Windows Device Manager under "Android Device" at the top (Motorola ADB Interface). My phone does show as connected in Bootloader Mode.
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
I have no experience with RSD Lite, so I can't say. Usually bricking happens when you try to downgrade gpt.bin and motoboot.img, or try to flash an incompatible firmware, which is not the case here.
I hope someone else with RSD Lite experience can better help.
Gus.Ottawa said:
I'm on Win 10 x64; you should install the usb drivers from Motorola so that they show up in Windows Device Manager under "Android Device" at the top (Motorola ADB Interface). My phone does show as connected in Bootloader Mode.
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
I have no experience with RSD Lite, so I can't say. Usually bricking happens when you try to downgrade gpt.bin and motoboot.img, or try to flash an incompatible firmware, which is not the case here.
I hope someone else with RSD Lite experience can better help.
Click to expand...
Click to collapse
OK thanks a lot. I will then give it a try. I suppose that there shouldn't be any issue then. Because I will go from 5.1 to 6.0.
OK I used RSD Lite and flash the 6.0 RETBR in my XT1095 and worked perfectly!!! I transformed the XT1095 into XT1097 and have 6.0!!!!! No problem with the modems
titotito1983 said:
OK I used RSD Lite and flash the 6.0 RETBR in my XT1095 and worked perfectly!!! I transformed the XT1095 into XT1097 and have 6.0!!!!! No problem with the modems
Click to expand...
Click to collapse
Excellent! Keep the firmware file, don't delete, in case you may need it later on, if you try other things with your phone.
titotito1983 said:
OK I used RSD Lite and flash the 6.0 RETBR in my XT1095 and worked perfectly!!! I transformed the XT1095 into XT1097 and have 6.0!!!!! No problem with the modems
Click to expand...
Click to collapse
Is it necessary to have the bootloader unlocked to do that?
vagoj said:
Is it necessary to have the bootloader unlocked to do that?
Click to expand...
Click to collapse
I think yes, at least I have it unlocked.
vagoj said:
Is it necessary to have the bootloader unlocked to do that?
Click to expand...
Click to collapse
Yes, the bootloader must be unlocked.
Sent from my XT1095 using Tapatalk
The XT1097 is the ATT model? Ididnt think anyone had rooted that, or unlocked its bootloader. At least not that I have found, am I wrong?
EliFinn said:
The XT1097 is the ATT model? Ididnt think anyone had rooted that, or unlocked its bootloader. At least not that I have found, am I wrong?
Click to expand...
Click to collapse
Read more carefully, he has the xt1097 from Brazil. The xt1097 from at&t can't be unlocked nor rooted. However the xt1097 from Canada, Chile, Brazil, Peru, etc can all be unlocked and rooted.
It is ONLY the AT&T in the USA which is locked and can't be unlocked.
Sent from my XT1095 using Tapatalk
AGISCI said:
Read more carefully, he has the xt1097 from Brazil. The xt1097 from at&t can't be unlocked nor rooted. However the xt1097 from Canada, Chile, Brazil, Peru, etc can all be unlocked and rooted.
It is ONLY the AT&T in the USA which is locked and can't be unlocked.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Correct. I have the XT1097 from Chile (originally) not Brasil I transformed first to XT1097 RETBR to get 5.0, then the XT1095 got if first, so I transformed it to XT1095. And now with 6.0 since the Pure is not even in soak yet I transformed it to XT1097 RETBR again
Hey There, i just got Motorola Moto x (2nd Gen) and it's currently running android 4.4.4 and is AT&T variant. Can any one tell me how can i update it to Marshmallow with/without international variant ?
Update process from PC will be preferred.
abdullah.ahsan11 said:
Hey There, i just got Motorola Moto x (2nd Gen) and it's currently running android 4.4.4 and is AT&T variant. Can any one tell me how can i update it to Marshmallow with/without international variant ?
Update process from PC will be preferred.
Click to expand...
Click to collapse
As its att and bootloader is locked so you cant go further.. Wait for officially update.. Well why you are on kitkat still? You should get lolipop by now..
Salik Iqbal said:
As its att and bootloader is locked so you cant go further.. Wait for officially update.. Well why you are on kitkat still? You should get lolipop by now..
Click to expand...
Click to collapse
Yes i am now at 5.1.1. Is there anyway i can unlock my bootloader?
abdullah.ahsan11 said:
Yes i am now at 5.1.1. Is there anyway i can unlock my bootloader?
Click to expand...
Click to collapse
Go into Settings, About Phone, tap Build Number 7 times, then go back one screen to Developer Options, enable Allow Bootloader Unlock, and USB Debugging.
Boot into Bootloader Mode and try:
fastboot oem unlock
That may not work on your phone.
Try to get the unlock code from Motorola:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
If you are able to unlock the bootloader, you have two choices: you can flash the 6.0 stock firmware from another variant, or you can flash a MarshMallow ROM, such as CyanogenMod.
Here's a link to stock Moto X 2014 firmwares:
https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg
abdullah.ahsan11 said:
Yes i am now at 5.1.1. Is there anyway i can unlock my bootloader?
Click to expand...
Click to collapse
Your bootloader is locked. To unlock it you need to use kingroot, then sunshine to unlock it. After that you can flash a marshmallow rom.
Sent from my XT1095 using Tapatalk
AGISCI said:
Your bootloader is locked. To unlock it you need to use kingroot, then sunshine to unlock it. After that you can flash a marshmallow rom.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I am a noob . Can You please refer me a link/tutorial. I know about king root but sunshine is new to me
UPDATE:
I tried to root with kingroot and it failed
For links to relevant guides and tutorials see Tony Stark's sticky at the top of the general forum.
Hi Sir, Gus Ghanem, pleased take two minutes to help me
Gus Ghanem said:
Go into Settings, About Phone, tap Build Number 7 times, then go back one screen to Developer Options, enable Allow Bootloader Unlock, and USB Debugging.
Boot into Bootloader Mode and try:
fastboot oem unlock
That may not work on your phone.
Try to get the unlock code from Motorola:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
If you are able to unlock the bootloader, you have two choices: you can flash the 6.0 stock firmware from another variant, or you can flash a MarshMallow ROM, such as CyanogenMod.
Here's a link to stock Moto X 2014 firmwares:
https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg
Click to expand...
Click to collapse
Dear sir,
I have Verizon xt 1096 and want to install Android 6.0 from other variants like xt 1092 from stock firmwares which links that you provided above. I will unlock my bootloader.
You please guide me how I can install using fastboot on my windows PC. I don't care about CDMA, it should work on GSM networks 2G and UMTS 3G and LTE because now I am in UAE and not using Verizon.
I need marshmallow 6.0. ... and I don't want to install custom recovery, ROM or root it, if it not necessary for upgrade process.
I will be very thankful to you.
Sorry I forgotten to mention, now I am on stock 5.1
Please also post some commands for fastboot. Thanks
abrarakram19 said:
Dear sir,
I have Version xt 1096 and want to install Android 6.0 from other Version like xt 1092 from stock firmwares which links that you provided above. I will unlock my bootloader.
You please guide me how I can install using fastboot on my windows PC. I don't care about CDMD, it should work on GSM networks 2G and 3G because now I am in UAE and not using Verizon.
I need marshmallow 6.0. ... and I don't want to install custom recovery, ROM or root it, if is it not necessary for upgrade process.
I will be very thankful to you.
Click to expand...
Click to collapse
Install Motorola USB drivers:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Extract/unzip the firmware file. Put adb.exe, fastboot.exe, AdbWinApi.dll, AdbWinUsbApi.dll inside that folder with the firmware files. Shift + Right click in the folder, and select Open command window here, paste these commands:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Gus Ghanem said:
Install Motorola USB drivers:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Extract/unzip the firmware file. Put adb.exe, fastboot.exe, AdbWinApi.dll, AdbWinUsbApi.dll inside that folder with the firmware files. Shift + Right click in the folder, and select Open command window here, paste these commands:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Thank you very much sir. I will try and I hope it will be done with your cooperation. If I felt any trouble I will beg some help from you. Thanks again.
Gus Ghanem said:
Install Motorola USB drivers:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Extract/unzip the firmware file. Put adb.exe, fastboot.exe, AdbWinApi.dll, AdbWinUsbApi.dll inside that folder with the firmware files. Shift + Right click in the folder, and select Open command window here, paste these commands:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Great sir, I followed your instructions and I successfully upgraded my moto x2 xt 1096 (5.1) to official 6.0 xt1092 without any trouble or changing my recovery or any thing else. Thanks for your help.
one thing is when I restart my device one warning screen appear like (your device's bootloader is unlocked and some more cautions) and moto boot animation is changed. Is it possible to get rid from these by simply re locking bootloader by fastboot command....... "fastboot oem lock"
Or after changing firmware it's not possible to re lock it simply myself or any other code is required.
And one more question can i later install other update like 6.0.1 if it is available in same way or will you upload any future updated firmware in same location MEGA from where I downloaded earlier.
And will I get any future OTA from Motorola i.e. 6.0.1 or higher and should I install that OTA if arrives, or not?
I will wait for your reply. Thank again
abrarakram19 said:
Great sir, I followed your instructions and I successfully upgraded my moto x2 xt 1096 (5.1) to official 6.0 xt1092 without any trouble or changing my recovery or any thing else. Thanks for your help.
one thing is when I restart my device one warning screen appear like (your device's bootloader is unlocked and some more cautions) and moto boot animation is changed. Is it possible to get rid from these by simply re locking bootloader by fastboot command....... "fastboot oem lock"
or after changing firmware it's not possible to re lock it simply myself or any other code is required.
And one more question can i later install other update like 6.0.1 if it is available in same way or will you upload any futur updated firmware in same location MEGA from where I downloaded earlier.
I will wait for your reply. Thank again
Click to expand...
Click to collapse
Yes, when you unlock your bootloader, the boot logo changes to the warning logo, and the boot animation was changed by Motorola for 6.0.
You should be able to relock the bootloader by "fastboot oem lock". You can also flash a different boot logo and animation, but then the phone will not be pure stock anymore.
Because you flashed pure stock firmware, you should get System updates for XT1092 when they are released by Motorola, you don't need to reflash the full firmware.
The factory firmwares on MEGA are not mine, but thank you to whoever is uploading them there.
Gus Ghanem said:
Yes, when you unlock your bootloader, the boot logo changes to the warning logo, and the boot animation was changed by Motorola for 6.0.
You should be able to relock the bootloader by "fastboot oem lock". You can also flash a different boot logo and animation, but then the phone will not be pure stock anymore.
Because you flashed pure stock firmware, you should get System updates for XT1092 when they are released by Motorola, you don't need to reflash the full firmware.
The factory firmwares on MEGA are not mine, but thank you to whoever is uploading them there.
Click to expand...
Click to collapse
Thanks dear Sir for your guidance.
So it mean if I re lock the bootloader by entering command "fastboot oem lock", then I can install future OTA update if it arrives for xt1092 without bricking my device? Or my device has official stock but hybrid firmware or some parts of firmware. (xt1096 +xt1092) and may brick while installing official motorola OTAs? Or now it is 100% pure xt1092.?
This is last request And I don't wat to waste your time any more because you already given your precious time to me.
Thanks again for your guidance.
abrarakram19 said:
Thanks dear Sir for your guidance.
So it mean if I re lock the bootloader by entering command "fastboot oem lock", then I can install future OTA update if it arrives for xt1092 without bricking my device? Or my device has official stock but hybrid firmware or some parts of firmware. (xt1096 +xt1092) and may brick while installing official motorola OTAs? Or now it is 100% pure xt1092.?
This is last request And I don't wat to waste your time any more because you already given your precious time to me.
Thanks again for your guidance.
Click to expand...
Click to collapse
1) You don't need to lock the bootloader to receive ota updates. Updates work with the bootloader unlocked.
2) Don't worry about updates, Motorola said marshmallow 6.0 is the last update this phone gets. There will not be anymore OTA updates.
Sent from my XT1095 using Tapatalk
abrarakram19 said:
Thanks dear Sir for your guidance.
So it mean if I re lock the bootloader by entering command "fastboot oem lock", then I can install future OTA update if it arrives for xt1092 without bricking my device? Or my device has official stock but hybrid firmware or some parts of firmware. (xt1096 +xt1092) and may brick while installing official motorola OTAs? Or now it is 100% pure xt1092.?
This is last request And I don't wat to waste your time any more because you already given your precious time to me.
Thanks again for your guidance.
Click to expand...
Click to collapse
Hi sir I tried to re lock the bootloader by entering command " fastboot oem lock " and failed as........
..... (bootloader) FAIL: please run fastboot oem lock begin first!
(bootloader) sst lock failure!
Then I entered... fastboot oem lock begin
and returnd string is follow
.... ( bootloader ) ready to flash signed images
Then I can't understand what to do now.?
And an other thing when I connect my phone to PC it is still recognise and mention it's name XT 1096 however I installed firmware of XT 1092 and every thing inside is totally new corresponding to 6.0 and is XT 1092.
Is there any thing wrong, or its bootloader could be re locked. Or I should repeat the whole flashing process and at last befor entering "fastboot reboot", I should try fastboot oem lock. Is that maters or not before rebooting first time, or should I re flash the boot.img now to lock the bootloader or it is more difficult to do or it is impossible. Any idea or help or any other link please.
---------- Post added at 04:10 PM ---------- Previous post was at 04:10 PM ----------
abrarakram19 said:
Thanks dear Sir for your guidance.
So it mean if I re lock the bootloader by entering command "fastboot oem lock", then I can install future OTA update if it arrives for xt1092 without bricking my device? Or my device has official stock but hybrid firmware or some parts of firmware. (xt1096 +xt1092) and may brick while installing official motorola OTAs? Or now it is 100% pure xt1092.?
This is last request And I don't wat to waste your time any more because you already given your precious time to me.
Thanks again for your guidance.
Click to expand...
Click to collapse
Hi sir I tried to re lock the bootloader by entering command " fastboot oem lock " and failed as........
..... (bootloader) FAIL: please run fastboot oem lock begin first!
(bootloader) sst lock failure!
Then I entered... fastboot oem lock begin
and returnd string is follow
.... ( bootloader ) ready to flash signed images
Then I can't understand what to do now.?
And an other thing when I connect my phone to PC it is still recognise and mention it's name XT 1096 however I installed firmware of XT 1092 and every thing inside is totally new corresponding to 6.0 and is XT 1092.
Is there any thing wrong, or its bootloader could be re locked. Or I should repeat the whole flashing process and at last befor entering "fastboot reboot", I should try fastboot oem lock. Is that maters or not before rebooting first time, or should I re flash the boot.img now to lock the bootloader or it is more difficult to do or it is impossible. Any idea or help or any other link please.
---------- Post added at 04:17 PM ---------- Previous post was at 04:10 PM ----------
AGISCI said:
1) You don't need to lock the bootloader to receive ota updates. Updates work with the bootloader unlocked.
2) Don't worry about updates, Motorola said marshmallow 6.0 is the last update this phone gets. There will not be anymore OTA updates.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Hi sir I tried to re lock the bootloader by entering command " fastboot oem lock " and failed as........
..... (bootloader) FAIL: please run fastboot oem lock begin first!
(bootloader) sst lock failure!
Then I entered... fastboot oem lock begin
and returnd string is follow*
.... ( bootloader ) ready to flash signed images
Then I can't understand what to do now.
And an other thing when I connect my phone to PC it is still recognise and mention it's name XT 1096 however I installed firmware of XT 1092 and every thing inside is totally new corresponding to 6.0 and is XT 1092.*
Is there any thing wrong, or its bootloader could be re locked. Or I should repeat the whole flashing process and at last befor entering "fastboot reboot", I should try fastboot oem lock. Is that maters or not before rebooting first time, or should I re flash the boot.img now to lock the bootloader or it is more difficult to do or it is impossible. Any idea or help or any other link please. Actually I hate this warnings screen and cautions every time when I power on my device and moto boot animation is terrible since I unlocked the bootloader.
verizon unlocked device.
sir i have an unlocked verizon moto x 2nd generation. can i get official motorola 6.0 update? is there any way?
thanks
Yes sure, follow the instructions in first page of this thread given by Gus Ghanem and say thanks to XDA developer team and their members
---------- Post added at 02:19 PM ---------- Previous post was at 02:15 PM ----------
There is also a MEGA link to download stock marshmallow 6.0 firmwares
---------- Post added at 02:25 PM ---------- Previous post was at 02:19 PM ----------
But only proceed to flash marshmallow 6.0 firmwares if you are not using Verizon network because you will loose CDMA but you can use GSM and UMTS networks
abrarakram19 said:
Yes sure, follow the instructions in first page of this thread given by Gus Ghanem and say thanks to XDA developer team and their members
---------- Post added at 02:19 PM ---------- Previous post was at 02:15 PM ----------
There is also a MEGA link to download stock marshmallow 6.0 firmwares
---------- Post added at 02:25 PM ---------- Previous post was at 02:19 PM ----------
But only proceed to flash marshmallow 6.0 firmwares if you are not using Verizon network because you will loose CDMA but you can use GSM and UMTS networks
Click to expand...
Click to collapse
For those who use verizon service there is this rom:
http://forum.xda-developers.com/showthread.php?t=3327345
Verizon cdma works in this custom stock rom.
Sent from my XT1095 using Tapatalk
Hi,
i just got brand new unused Moto X 2nd gen (2014), It has 4.4 Android on it, but OTA update does not want to work anymore, as of 15.1.2020.
It is unlocked XT1095.
I am looking for somebody to help me over Skype to update it to 5.1 and then to 6.0 - the way usual update would go, and would donate to you via PayPal.