Database Develop

[Q] Going back to the XT1092 model from the XT1095

Dear all!
I converted my European XT1092 to the American XT1095 Pure Edition to flash Lollipop.
Now the European ROMs are rolling out - and I would like to go back to the original model number to receive future ota updates in my country. Unfortunately flashing back KitKat for the XT1092 didn´t work...(nor did the European Lollipop firmware)
Does anyone know how I can convert my Moto X 2014 back to its initial state when I bought it? From XT1092 to XT1095 and now back again to XT1092?
Thanks in advance!
Edit: Found the problem and solved it!

Komplize said:
Dear all!
I converted my European XT1092 to the American XT1095 Pure Edition to flash Lollipop.
Now the European ROMs are rolling out - and I would like to go back to the original model number to receive future ota updates in my country. Unfortunately flashing back KitKat for the XT1092 didn´t work...(nor did the European Lollipop firmware)
Does anyone know how I can convert my Moto X 2014 back to its initial state when I bought it? From XT1092 to XT1095 and now back again to XT1092?
Thanks in advance!
Edit: Found the problem and solved it!
Click to expand...
Click to collapse
How?

knepe said:
How?
Click to expand...
Click to collapse
Yeah how? I need this also. Would be very kind of you to post it.

Just use the mfastboot commands from this post but use a uk firmware image.. Flash them one by one and all should be fine
[quote name="AllenLoyola23" post=57633988]Hey any ideas how i can go about installing that? Ive tried to use Multi tool to get stock but now it says my phone is xt1095 but it was originally xt1092 :/ ive tried to find the uk stock firmware but no luck.[/QUOTE]
It's a factory image you can flash it over anything you currently have running. Open the Multi tool folder and you will see some called 'msfastboot' Make a new folder on your desktop and place that in there, then download the factory image I gave you the link for and extract it into the same folder you placed the msfastboot into. Then, whilst in that folder hold the shift key on your keyboard and then right click on your mouse and select 'open a command window here' Then put your phone in fastboot by turning it off and holding the power and volume down keys at the same time. Then, in the terminal you opened earlier type these commands one at a time:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin (REMOVES YOUR CUSTOM BOOTLOGO (Not neccessary))
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata (FACTORY RESETS YOUR FLASH MEMORY (Not neccessary))
mfastboot erase customize (REMOVES MOTOMAKER CUSTOMIZATIONS (Not neccessary))
mfastboot erase clogo (REM
mfastboot reboot
---------- Post added at 07:36 PM ---------- Previous post was at 07:23 PM ----------
http://forum.xda-developers.com/showthread.php?p=57591807 here is a link for the firmware IMG.

Locked bootloader,NO OS and failed to flash??

hi guys
have some problem here and it s serious
so my man locked the bootloader with a tutorial from a Moto g and write wrong
locked the bootloader then flash it the system then erases the userdata and all cache etc
so no recovery,no boot.
now when is trying to unlock the bootloader says OEM allowed unlock or something similar
i was trying to flash 4..4.4 RETBR but got some errors
bootloader invalid sytem img
bootloader invalid prefailed flash
how can i make it work?
the phone stays in fastboot always
can t boot to recovery
please some help here
i was thinking 3 solutions.
unlocking the bootloader but how?
waiting for Lollipop img
or calling Motorola to unlock the bl
thank u

why would you relock your bootloader?
solution its simple, if you dont want to unlock it again, use rsd lite 6.2.9 and flash the firmware from the country of your moto maxx, if its a mexican moto maxx flash mexico ,if its puerto rico, PR or if its brasil, then brasil. you can flash them, those are flasheable with locked bootloader because they are signed, just the one where your phone was

Jaocagomez said:
why would you relock your bootloader?
solution its simple, if you dont want to unlock it again, use rsd lite 6.2.9 and flash the firmware from the country of your moto maxx, if its a mexican moto maxx flash mexico ,if its puerto rico, PR or if its brasil, then brasil. you can flash them, those are flasheable with locked bootloader because they are signed, just the one where your phone was
Click to expand...
Click to collapse
But RSD doesnt recognize the phone

guivalli said:
But RSD doesnt recognize the phone
Click to expand...
Click to collapse
You need your phone on fastboot and use rsd 6.2.4

Jaocagomez said:
You need your phone on fastboot and use rsd 6.2.4
Click to expand...
Click to collapse
Yes!! rsd 6.2.4 recognize!
But result fail gpt.bin
---------- Post added at 04:33 AM ---------- Previous post was at 03:48 AM ----------
guivalli said:
Yes!! rsd 6.2.4 recognize!
But result fail gpt.bin
Click to expand...
Click to collapse
i replace gpt.bin than lollipop OTA and its ok!
but fail in boot.img, recovery.img and system.img_sp...0,1,2,3,4 fail too

guivalli said:
Yes!! rsd 6.2.4 recognize!
But result fail gpt.bin
---------- Post added at 04:33 AM ---------- Previous post was at 03:48 AM ----------
i replace gpt.bin than lollipop OTA and its ok!
but fail in boot.img, recovery.img and system.img_sp...0,1,2,3,4 fail too
Click to expand...
Click to collapse
Please don't do that, lollipop it's supposed to install via recovery and not thru fastboot, please check that you downloaded the retail version of your Moto maxx and not carrier one.

Jaocagomez said:
Please don't do that, lollipop it's supposed to install via recovery and not thru fastboot, please check that you downloaded the retail version of your Moto maxx and not carrier one.
Click to expand...
Click to collapse
i tired both and same errors
before that problem in my moto, i was in lollipop...
do u think thats the problem?

guivalli said:
i tired both and same errors
before that problem in my moto, i was in lollipop...
do u think thats the problem?
Click to expand...
Click to collapse
First things first, it's your Moto maxx from mexico, puerto rico or Brasil?

Jaocagomez said:
First things first, it's your Moto maxx from mexico, puerto rico or Brasil?
Click to expand...
Click to collapse
Brasil

guivalli said:
Brasil
Click to expand...
Click to collapse
It's retail version or from claro or another company?

Jaocagomez said:
It's retail version or from claro or another company?
Click to expand...
Click to collapse
Retail

guivalli said:
Retail
Click to expand...
Click to collapse
Download this firmware and then flash it with rsd lite
https://mega.co.nz/#!KtYX2A7S!LTexE6weRap6e2g9l_ve8aBdShW-sGMpp2ZI4-xT_EA

Jaocagomez said:
Download this firmware and then flash it with rsd lite
https://mega.co.nz/#!KtYX2A7S!LTexE6weRap6e2g9l_ve8aBdShW-sGMpp2ZI4-xT_EA
Click to expand...
Click to collapse
i tried this one...
Failed everytime... i think its cause i used a Lolli before

guivalli said:
i tried this one...
Failed everytime... i think its cause i used a Lolli before
Click to expand...
Click to collapse
Then you have to manually flash all the files with fastboot, unzip all the contents to your fastboot folder and flash them one by one let me look for the fastboot commands

Jaocagomez said:
Then you have to manually flash all the files with fastboot, unzip all the contents to your fastboot folder and flash them one by one let me look for the fastboot commands
Click to expand...
Click to collapse
Jaocagomez,
i tried flash manual, 2danger try to me too
But with bootloader locked + impossible unlock cause lolli demand check one option in settings to unlock... all failed

guivalli said:
Jaocagomez,
i tried flash manual, 2danger try to me too
But with bootloader locked + impossible unlock cause lolli demand check one option in settings to unlock... all failed
Click to expand...
Click to collapse
You flash those files in fastboot mode, lollipop has nothing to do with it
This is fastboot mode:
http://forum.xda-developers.com/showthread.php?t=3011311

Jaocagomez said:
You flash those files in fastboot mode, lollipop has nothing to do with it
This is fastboot mode:
http://forum.xda-developers.com/showthread.php?t=3011311
Click to expand...
Click to collapse
Yes, my Moto doesnt exit fastboot mode

guivalli said:
Yes, my Moto doesnt exit fastboot mode
Click to expand...
Click to collapse
Do you have android sdk installed on your pc? You need that to flash without rsd

Jaocagomez said:
Do you have android sdk installed on your pc? You need that to flash without rsd
Click to expand...
Click to collapse
I have fastboot, mfastboot, adb... everything =/

guivalli said:
I have fastboot, mfastboot, adb... everything =/
Click to expand...
Click to collapse
ok unzip all the contents of firmware you downloaded on the fastboot folder.
using cmd write
Code:
fastboot devices
if a device show with any code like d654654
then your phone its detected
after that write this in cmd:
you can copy and paste it:
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot bootloader.img
fastboot flash radio radio.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
fastboot erase cache
fastboot erase userdata
fastboot erase clogo
fastboot oem fb_mode_clear
and your phone will work.

Moto x Soft Brick after try downgrade

Hi,
i think i just brick my phone (xt1095)
i have a moto x (2014) with CM12, i install the latest cm13's nightles via update option from the configurations of cyanogen
after that, the phone doesn't work properly (constantly display "google play services stop working" message)
i tried to fix it but i couldn't so i tried to back to a stock rom (5.0.2) via fastboot using this commands
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
Click to expand...
Click to collapse
after rebooting the phone stuck in the motorola logo, i tried this method (2nd method)
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
but still get frozen in the motorola logo( this method didn't works either)
so, any ways to repair muy phone?
Thanks in advance
PD: sorry if my english sucks

flash stock 5.1 by RSD

md07 said:
flash stock 5.1 by RSD
Click to expand...
Click to collapse
rsd doesn't recognize my phone, can i flash it by Fastboot? (with all the command from method 2?)
EDIT: i flash by fastboot and is alive!
my question now is can i receive the OTA, in some thread says that you can't do this because is a hardbrick

Cloud099 said:
rsd doesn't recognize my phone, can i flash it by Fastboot? (with all the command from method 2?)
EDIT: i flash by fastboot and is alive!
my question now is can i receive the OTA, in some thread says that you can't do this because is a hardbrick
Click to expand...
Click to collapse
use RSD 6.2.4, it's compatible with Moto X 2nd.
You shouldn't update OTA, i think flash full fw with RSD is safest way, cleanest, and fastest.

md07 said:
use RSD 6.2.4, it's compatible with Moto X 2nd.
You shouldn't update OTA, i think flash full fw with RSD is safest way, cleanest, and fastest.
Click to expand...
Click to collapse
i search that version and worked, but i already flash by fastboot xD
if i want 6.0 i have to find a stock firmware or just root device/install recovery/falsh rom right?
i have the brazilian stock rom and The OTA doesn't show
EDIT: i just install 6.0 by RSD lite 6.2.4 using this stock rom
http://forum.xda-developers.com/moto-x-2014/development/rom-installation-rsd-t3263800
i can reply in that thread, but is working fine for now

How to update Moto x (2nd Gen) To marshmallow

Hey There, i just got Motorola Moto x (2nd Gen) and it's currently running android 4.4.4 and is AT&T variant. Can any one tell me how can i update it to Marshmallow with/without international variant ?
Update process from PC will be preferred.

abdullah.ahsan11 said:
Hey There, i just got Motorola Moto x (2nd Gen) and it's currently running android 4.4.4 and is AT&T variant. Can any one tell me how can i update it to Marshmallow with/without international variant ?
Update process from PC will be preferred.
Click to expand...
Click to collapse
As its att and bootloader is locked so you cant go further.. Wait for officially update.. Well why you are on kitkat still? You should get lolipop by now..

Salik Iqbal said:
As its att and bootloader is locked so you cant go further.. Wait for officially update.. Well why you are on kitkat still? You should get lolipop by now..
Click to expand...
Click to collapse
Yes i am now at 5.1.1. Is there anyway i can unlock my bootloader?

abdullah.ahsan11 said:
Yes i am now at 5.1.1. Is there anyway i can unlock my bootloader?
Click to expand...
Click to collapse
Go into Settings, About Phone, tap Build Number 7 times, then go back one screen to Developer Options, enable Allow Bootloader Unlock, and USB Debugging.
Boot into Bootloader Mode and try:
fastboot oem unlock
That may not work on your phone.
Try to get the unlock code from Motorola:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
If you are able to unlock the bootloader, you have two choices: you can flash the 6.0 stock firmware from another variant, or you can flash a MarshMallow ROM, such as CyanogenMod.
Here's a link to stock Moto X 2014 firmwares:
https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg

abdullah.ahsan11 said:
Yes i am now at 5.1.1. Is there anyway i can unlock my bootloader?
Click to expand...
Click to collapse
Your bootloader is locked. To unlock it you need to use kingroot, then sunshine to unlock it. After that you can flash a marshmallow rom.
Sent from my XT1095 using Tapatalk

AGISCI said:
Your bootloader is locked. To unlock it you need to use kingroot, then sunshine to unlock it. After that you can flash a marshmallow rom.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I am a noob . Can You please refer me a link/tutorial. I know about king root but sunshine is new to me
UPDATE:
I tried to root with kingroot and it failed

For links to relevant guides and tutorials see Tony Stark's sticky at the top of the general forum.

Hi Sir, Gus Ghanem, pleased take two minutes to help me
Gus Ghanem said:
Go into Settings, About Phone, tap Build Number 7 times, then go back one screen to Developer Options, enable Allow Bootloader Unlock, and USB Debugging.
Boot into Bootloader Mode and try:
fastboot oem unlock
That may not work on your phone.
Try to get the unlock code from Motorola:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
If you are able to unlock the bootloader, you have two choices: you can flash the 6.0 stock firmware from another variant, or you can flash a MarshMallow ROM, such as CyanogenMod.
Here's a link to stock Moto X 2014 firmwares:
https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg
Click to expand...
Click to collapse
Dear sir,
I have Verizon xt 1096 and want to install Android 6.0 from other variants like xt 1092 from stock firmwares which links that you provided above. I will unlock my bootloader.
You please guide me how I can install using fastboot on my windows PC. I don't care about CDMA, it should work on GSM networks 2G and UMTS 3G and LTE because now I am in UAE and not using Verizon.
I need marshmallow 6.0. ... and I don't want to install custom recovery, ROM or root it, if it not necessary for upgrade process.
I will be very thankful to you.
Sorry I forgotten to mention, now I am on stock 5.1
Please also post some commands for fastboot. Thanks

abrarakram19 said:
Dear sir,
I have Version xt 1096 and want to install Android 6.0 from other Version like xt 1092 from stock firmwares which links that you provided above. I will unlock my bootloader.
You please guide me how I can install using fastboot on my windows PC. I don't care about CDMD, it should work on GSM networks 2G and 3G because now I am in UAE and not using Verizon.
I need marshmallow 6.0. ... and I don't want to install custom recovery, ROM or root it, if is it not necessary for upgrade process.
I will be very thankful to you.
Click to expand...
Click to collapse
Install Motorola USB drivers:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Extract/unzip the firmware file. Put adb.exe, fastboot.exe, AdbWinApi.dll, AdbWinUsbApi.dll inside that folder with the firmware files. Shift + Right click in the folder, and select Open command window here, paste these commands:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot

Gus Ghanem said:
Install Motorola USB drivers:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Extract/unzip the firmware file. Put adb.exe, fastboot.exe, AdbWinApi.dll, AdbWinUsbApi.dll inside that folder with the firmware files. Shift + Right click in the folder, and select Open command window here, paste these commands:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Thank you very much sir. I will try and I hope it will be done with your cooperation. If I felt any trouble I will beg some help from you. Thanks again.

Gus Ghanem said:
Install Motorola USB drivers:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Extract/unzip the firmware file. Put adb.exe, fastboot.exe, AdbWinApi.dll, AdbWinUsbApi.dll inside that folder with the firmware files. Shift + Right click in the folder, and select Open command window here, paste these commands:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Great sir, I followed your instructions and I successfully upgraded my moto x2 xt 1096 (5.1) to official 6.0 xt1092 without any trouble or changing my recovery or any thing else. Thanks for your help.
one thing is when I restart my device one warning screen appear like (your device's bootloader is unlocked and some more cautions) and moto boot animation is changed. Is it possible to get rid from these by simply re locking bootloader by fastboot command....... "fastboot oem lock"
Or after changing firmware it's not possible to re lock it simply myself or any other code is required.
And one more question can i later install other update like 6.0.1 if it is available in same way or will you upload any future updated firmware in same location MEGA from where I downloaded earlier.
And will I get any future OTA from Motorola i.e. 6.0.1 or higher and should I install that OTA if arrives, or not?
I will wait for your reply. Thank again

abrarakram19 said:
Great sir, I followed your instructions and I successfully upgraded my moto x2 xt 1096 (5.1) to official 6.0 xt1092 without any trouble or changing my recovery or any thing else. Thanks for your help.
one thing is when I restart my device one warning screen appear like (your device's bootloader is unlocked and some more cautions) and moto boot animation is changed. Is it possible to get rid from these by simply re locking bootloader by fastboot command....... "fastboot oem lock"
or after changing firmware it's not possible to re lock it simply myself or any other code is required.
And one more question can i later install other update like 6.0.1 if it is available in same way or will you upload any futur updated firmware in same location MEGA from where I downloaded earlier.
I will wait for your reply. Thank again
Click to expand...
Click to collapse
Yes, when you unlock your bootloader, the boot logo changes to the warning logo, and the boot animation was changed by Motorola for 6.0.
You should be able to relock the bootloader by "fastboot oem lock". You can also flash a different boot logo and animation, but then the phone will not be pure stock anymore.
Because you flashed pure stock firmware, you should get System updates for XT1092 when they are released by Motorola, you don't need to reflash the full firmware.
The factory firmwares on MEGA are not mine, but thank you to whoever is uploading them there.

Gus Ghanem said:
Yes, when you unlock your bootloader, the boot logo changes to the warning logo, and the boot animation was changed by Motorola for 6.0.
You should be able to relock the bootloader by "fastboot oem lock". You can also flash a different boot logo and animation, but then the phone will not be pure stock anymore.
Because you flashed pure stock firmware, you should get System updates for XT1092 when they are released by Motorola, you don't need to reflash the full firmware.
The factory firmwares on MEGA are not mine, but thank you to whoever is uploading them there.
Click to expand...
Click to collapse
Thanks dear Sir for your guidance.
So it mean if I re lock the bootloader by entering command "fastboot oem lock", then I can install future OTA update if it arrives for xt1092 without bricking my device? Or my device has official stock but hybrid firmware or some parts of firmware. (xt1096 +xt1092) and may brick while installing official motorola OTAs? Or now it is 100% pure xt1092.?
This is last request And I don't wat to waste your time any more because you already given your precious time to me.
Thanks again for your guidance.

abrarakram19 said:
Thanks dear Sir for your guidance.
So it mean if I re lock the bootloader by entering command "fastboot oem lock", then I can install future OTA update if it arrives for xt1092 without bricking my device? Or my device has official stock but hybrid firmware or some parts of firmware. (xt1096 +xt1092) and may brick while installing official motorola OTAs? Or now it is 100% pure xt1092.?
This is last request And I don't wat to waste your time any more because you already given your precious time to me.
Thanks again for your guidance.
Click to expand...
Click to collapse
1) You don't need to lock the bootloader to receive ota updates. Updates work with the bootloader unlocked.
2) Don't worry about updates, Motorola said marshmallow 6.0 is the last update this phone gets. There will not be anymore OTA updates.
Sent from my XT1095 using Tapatalk

abrarakram19 said:
Thanks dear Sir for your guidance.
So it mean if I re lock the bootloader by entering command "fastboot oem lock", then I can install future OTA update if it arrives for xt1092 without bricking my device? Or my device has official stock but hybrid firmware or some parts of firmware. (xt1096 +xt1092) and may brick while installing official motorola OTAs? Or now it is 100% pure xt1092.?
This is last request And I don't wat to waste your time any more because you already given your precious time to me.
Thanks again for your guidance.
Click to expand...
Click to collapse
Hi sir I tried to re lock the bootloader by entering command " fastboot oem lock " and failed as........
..... (bootloader) FAIL: please run fastboot oem lock begin first!
(bootloader) sst lock failure!
Then I entered... fastboot oem lock begin
and returnd string is follow
.... ( bootloader ) ready to flash signed images
Then I can't understand what to do now.?
And an other thing when I connect my phone to PC it is still recognise and mention it's name XT 1096 however I installed firmware of XT 1092 and every thing inside is totally new corresponding to 6.0 and is XT 1092.
Is there any thing wrong, or its bootloader could be re locked. Or I should repeat the whole flashing process and at last befor entering "fastboot reboot", I should try fastboot oem lock. Is that maters or not before rebooting first time, or should I re flash the boot.img now to lock the bootloader or it is more difficult to do or it is impossible. Any idea or help or any other link please.
---------- Post added at 04:10 PM ---------- Previous post was at 04:10 PM ----------
abrarakram19 said:
Thanks dear Sir for your guidance.
So it mean if I re lock the bootloader by entering command "fastboot oem lock", then I can install future OTA update if it arrives for xt1092 without bricking my device? Or my device has official stock but hybrid firmware or some parts of firmware. (xt1096 +xt1092) and may brick while installing official motorola OTAs? Or now it is 100% pure xt1092.?
This is last request And I don't wat to waste your time any more because you already given your precious time to me.
Thanks again for your guidance.
Click to expand...
Click to collapse
Hi sir I tried to re lock the bootloader by entering command " fastboot oem lock " and failed as........
..... (bootloader) FAIL: please run fastboot oem lock begin first!
(bootloader) sst lock failure!
Then I entered... fastboot oem lock begin
and returnd string is follow
.... ( bootloader ) ready to flash signed images
Then I can't understand what to do now.?
And an other thing when I connect my phone to PC it is still recognise and mention it's name XT 1096 however I installed firmware of XT 1092 and every thing inside is totally new corresponding to 6.0 and is XT 1092.
Is there any thing wrong, or its bootloader could be re locked. Or I should repeat the whole flashing process and at last befor entering "fastboot reboot", I should try fastboot oem lock. Is that maters or not before rebooting first time, or should I re flash the boot.img now to lock the bootloader or it is more difficult to do or it is impossible. Any idea or help or any other link please.
---------- Post added at 04:17 PM ---------- Previous post was at 04:10 PM ----------
AGISCI said:
1) You don't need to lock the bootloader to receive ota updates. Updates work with the bootloader unlocked.
2) Don't worry about updates, Motorola said marshmallow 6.0 is the last update this phone gets. There will not be anymore OTA updates.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Hi sir I tried to re lock the bootloader by entering command " fastboot oem lock " and failed as........
..... (bootloader) FAIL: please run fastboot oem lock begin first!
(bootloader) sst lock failure!
Then I entered... fastboot oem lock begin
and returnd string is follow*
.... ( bootloader ) ready to flash signed images
Then I can't understand what to do now.
And an other thing when I connect my phone to PC it is still recognise and mention it's name XT 1096 however I installed firmware of XT 1092 and every thing inside is totally new corresponding to 6.0 and is XT 1092.*
Is there any thing wrong, or its bootloader could be re locked. Or I should repeat the whole flashing process and at last befor entering "fastboot reboot", I should try fastboot oem lock. Is that maters or not before rebooting first time, or should I re flash the boot.img now to lock the bootloader or it is more difficult to do or it is impossible. Any idea or help or any other link please. Actually I hate this warnings screen and cautions every time when I power on my device and moto boot animation is terrible since I unlocked the bootloader.

verizon unlocked device.
sir i have an unlocked verizon moto x 2nd generation. can i get official motorola 6.0 update? is there any way?
thanks

Yes sure, follow the instructions in first page of this thread given by Gus Ghanem and say thanks to XDA developer team and their members
---------- Post added at 02:19 PM ---------- Previous post was at 02:15 PM ----------
There is also a MEGA link to download stock marshmallow 6.0 firmwares
---------- Post added at 02:25 PM ---------- Previous post was at 02:19 PM ----------
But only proceed to flash marshmallow 6.0 firmwares if you are not using Verizon network because you will loose CDMA but you can use GSM and UMTS networks

abrarakram19 said:
Yes sure, follow the instructions in first page of this thread given by Gus Ghanem and say thanks to XDA developer team and their members
---------- Post added at 02:19 PM ---------- Previous post was at 02:15 PM ----------
There is also a MEGA link to download stock marshmallow 6.0 firmwares
---------- Post added at 02:25 PM ---------- Previous post was at 02:19 PM ----------
But only proceed to flash marshmallow 6.0 firmwares if you are not using Verizon network because you will loose CDMA but you can use GSM and UMTS networks
Click to expand...
Click to collapse
For those who use verizon service there is this rom:
http://forum.xda-developers.com/showthread.php?t=3327345
Verizon cdma works in this custom stock rom.
Sent from my XT1095 using Tapatalk

Hi,
i just got brand new unused Moto X 2nd gen (2014), It has 4.4 Android on it, but OTA update does not want to work anymore, as of 15.1.2020.
It is unlocked XT1095.
I am looking for somebody to help me over Skype to update it to 5.1 and then to 6.0 - the way usual update would go, and would donate to you via PayPal.

Firmware/Rom downgrade XT1072 -No sound-

Hi All!
Here is my situation, I have a moto g xt1072 (Jan 2016) which came with a faulty problem, no sound after 5 seconds of been started. I checked everything (Factory reset via recovery), including both speakers, (both working at 7.5 ohms). Do you think a firmware change or a different ROM can help or it's time to let it go?
Base band: M8926_309101.02.03.19R THEA_EMEA_CUST
Kernel: 3.4.42-gef77327 [email protected] #1
System Version: 24.41.34.thea_retes.retesall.en.EU retes
Complation numer: MPB24.65-34
Everything is stock, no changes were made.
Thanks in advance!!!
@lost101

did you look here
http://forum.xda-developers.com/moto-g-lte

sd_shadow said:
did you look here
http://forum.xda-developers.com/moto-g-lte
Click to expand...
Click to collapse
Yep, if you are familliar with this process could you mind writing me a list of steps in order? I'll investigate 1 by 1 later, I've found so much info that's confusing. My phone is unlcock for any cellphone company, but It's not root, it's stock.
I used to install custom ROM's on my old Defy + but I things are very different now for what I'm seening. :S

Fastboot flash the latest full factory firmware image for your model.
mfastboot download: https://www.androidfilehost.com/?fid=24052804347778493
XT1072 Retail Spain Android 6.0 Factory Firmware Image: https://www.androidfilehost.com/?fid=24533103863143791
Fastboot tutorial: http://forum.xda-developers.com/showthread.php?t=2542219 (See specific fastboot commands below)
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot​

murrayhawk said:
Yep, if you are familliar with this process could you mind writing me a list of steps in order? I'll investigate 1 by 1 later, I've found so much info that's confusing. My phone is unlcock for any cellphone company, but It's not root, it's stock.
I used to install custom ROM's on my old Defy + but I things are very different now for what I'm seening. :S
Click to expand...
Click to collapse
please dont mess up the flash.. because then you're pretty much ****ed.. as far ive seen and read and heard and tried, there will be no fix..

lost101 said:
Fastboot flash the latest full factory firmware image for your model.
mfastboot download: https://www.androidfilehost.com/?fid=24052804347778493
XT1072 Retail Spain Android 6.0 Factory Firmware Image: https://www.androidfilehost.com/?fid=24533103863143791
Fastboot tutorial: http://forum.xda-developers.com/showthread.php?t=2542219 (See specific fastboot commands below)
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot​
Click to expand...
Click to collapse
mfastboot download: Done
firmware download : Done
Fastboot: I'm not quite sure what is this about, is this for the new firmware installation? The guide you point says something about downgrading 4.3 to 4.2 and I'm running 6.0 stock.
I tried the first command (mfastboot flash partition gpt.bin) and it got stuck at : Waiting for device.
should I root the phone first?
can I use RSD Lite?

ora69 said:
please dont mess up the flash.. because then you're pretty much ****ed.. as far ive seen and read and heard and tried, there will be no fix..
Click to expand...
Click to collapse
I don't have anything to lose, this phone is rebooting itselft every 2 minutes.

murrayhawk said:
I don't have anything to lose, this phone is rebooting itselft every 2 minutes.
Click to expand...
Click to collapse
please, if anything gives a fail, post it on the thread! I myself have hard bricked this device, and now im trying to find the testpoint for it, ive already invested hours into this.. and i have no progress!, its worth it to post it on a thread

murrayhawk said:
mfastboot download: Done
firmware download : Done
Fastboot: I'm not quite sure what is this about, is this for the new firmware installation? The guide you point says something about downgrading 4.3 to 4.2 and I'm running 6.0 stock.
I tried the first command (mfastboot flash partition gpt.bin) and it got stuck at : Waiting for device.
should I root the phone first?
can I use RSD Lite?
Click to expand...
Click to collapse
The guide I linked to is not about downgrading. Ignore references to Android 4.3 - it still applies to Android 6.0. It sounds like you have not installed the usb drivers for your phone in Windows. This is a prerequisite. These Moto G drivers will also work for your phone:
Moto G USB Drivers (WinXP/7/8/10 32Bit-64Bit)​
Test Fastboot is working by typing: fastboot devices
You may also be able to use RSD Lite - but this again will require you have installed USB drivers for your phone.

murrayhawk said:
mfastboot download: Done
firmware download : Done
Fastboot: I'm not quite sure what is this about, is this for the new firmware installation? The guide you point says something about downgrading 4.3 to 4.2 and I'm running 6.0 stock.
I tried the first command (mfastboot flash partition gpt.bin) and it got stuck at : Waiting for device.
should I root the phone first?
can I use RSD Lite?
Click to expand...
Click to collapse
my opinion is use RSD lite first, unless there is not a specific firmware file for your carrier/region...
or there is a high rate of flashing failure with the firmware available.
if RSD lite fails, best to post errors from pc and phone here
before try again, if there's not an obvious fix
then try mfastboot.exe
fastboot.exe is generic android, mfastboot.exe is Motorola specific, for moto's unique system.img...
avoid usb 3.0 ports
make sure the firmware downloaded is correct size, verified MD5 is best.
verify drivers are correct when the device is in fastboot mode
I have generic moto instructions in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my KFFOWI using XDA Labs

sd_shadow said:
my opinion is use RSD lite first, unless there is not a specific firmware file for your carrier/region...
or there is a high rate of flashing failure with the firmware available.
if RSD lite fails, best to post errors from pc and phone here
before try again, if there's not an obvious fix
then try mfastboot.exe
fastboot.exe is generic android, mfastboot.exe is Motorola specific, for moto's unique system.img...
avoid usb 3.0 ports
make sure the firmware downloaded is correct size, verified MD5 is best.
verify drivers are correct when the device is in fastboot mode
I have generic moto instructions in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse
i think the tip you gave to avoid usb 3.0 ports will really help, didnt realize i was using the usb 3.0 port

Ok, this is what I did so far: (I'm running Windows 7 64b).
1. RSD Lite 6.2.4: Installed
2. Motorola Mobile Drivers Installation 6.4.0: Installed
3. Motorola Device Manager: Installed
1. I started the mobile into the recovery mode
2. Connected the moto cable to the pc
3. Opened RSD Lite, loaded the new firmware and hit start boton
4. The process reached a "please reboot manually...."
5. The phone starts but with the old firmware in it.

More Updates: I ran mfastboot sequence and every command returned OKAY. The issue still remains intact, sound works for 5 seconds, and the firmware has not been updated.
Any thoughts?

murrayhawk said:
More Updates: I ran mfastboot sequence and every command returned OKAY. The issue still remains intact, sound works for 5 seconds, and the firmware has not been updated.
Any thoughts?
Click to expand...
Click to collapse
I want to see a full and complete log of the fastboot flashing process. Copy and paste command prompt screen. Take screenshots if necessary.

lost101 said:
I want to see a full and complete log of the fastboot flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
Click to expand...
Click to collapse
Ok, please check the attachment.

It looks increasingly like your issue is hardware, not software related. The only remaining software option I can suggest is via PC, do the following wipe: (requires working ADB setup - google it)
http://forum.xda-developers.com/showpost.php?p=65431978&postcount=22​

lost101 said:
It looks increasingly like your issue is hardware, not software related. The only remaining software option I can suggest is via PC, do the following wipe: (requires working ADB setup - google it)
http://forum.xda-developers.com/showpost.php?p=65431978&postcount=22​
Click to expand...
Click to collapse
Can you explain why does it retain the original firmware after mfastboot commandas ran well?

Just a quick reminder. This moto g XT1702 Jan2016, is not rooted, bootloader is locked and has everything stock, it came with Android 6.0 installed.

murrayhawk said:
Can you explain why does it retain the original firmware after mfastboot command as ran well?
Click to expand...
Click to collapse
How do you mean original Firmware? You are flashing a Stock Android 6.0 firmware image.

lost101 said:
How do you mean original Firmware? You are flashing a Stock Android 6.0 firmware image.
Click to expand...
Click to collapse
What I have right now is : System Version: 24.41.34.thea_retes.retesall.en.EU retes and after flashing to XT1072_THEA_RETES_6.0_MPB24.65-34_cid7_subsidy-DEFAULT_CFC.xml. I'm still having 24.41.34.thea_retes.retesall.en.EU retes.