Related
Hello everyone,yesterday i got my new galaxy S i9000 and i did install latest CM9.
I was wondering,how do i get back the STOCK firmware with its original kernel(obiviously locked bootloader) and without root? Thanks to everyone who will help me!
Hi there,
you just have to install the galaxy S divers on your computer and use odin to reinstall the stock ROM. Go on samfirmware to choose the Stock ROM you prefer...
I can't find the official thread here on XDA, but you should be alright with samfirmware (look it up on google).
(tick repartition!!!)
Wolf80 said:
Hello everyone,yesterday i got my new galaxy S i9000 and i did install latest CM9.
I was wondering,how do i get back the STOCK firmware with its original kernel(obiviously locked bootloader) and without root? Thanks to everyone who will help me!
Click to expand...
Click to collapse
you need to download 3 file odin from here http://hotfile.com/dl/146501544/03b0f87/I9000XXJVU_I9000OXAJVU_OXA.zip.html
and flash via odin
and post in q&a forum
Will flashing a Stock ROM lock the bootloader again?
512 pit file n reparation tick... right?
Sent from my GT-I9000
Wolf80 said:
Hello everyone,yesterday i got my new galaxy S i9000 and i did install latest CM9.
I was wondering,how do i get back the STOCK firmware with its original kernel(obiviously locked bootloader) and without root? Thanks to everyone who will help me!
Click to expand...
Click to collapse
just wanted to know that which method you used to root your phone and switched to cm9..?
When you are flashing a 3-file ROM (with PIT, yes, 512), TICK Re-Partition, when you are flashing a 1-file ROM (e.g. from samfirmware) do NOT tick Re-Partition
Ajoslaf said:
When you are flashing a 3-file ROM (with PIT, yes, 512), TICK Re-Partition, when you are flashing a 1-file ROM (e.g. from samfirmware) do NOT tick Re-Partition
Click to expand...
Click to collapse
Thank you very much bro... and what about boot loader ?? Tick or untick..??. sorry for noob questions
Sent from my GT-I9000 using xda premium
u.bindal said:
just wanted to know that which method you used to root your phone and switched to cm9..?
Click to expand...
Click to collapse
I flashed Semaphore 2.5.0 kernel with Odin,then i downloaded CM7,installed,configured,and installed CM9
Downloaded now the firmware from samfirmware! I have to tick repartion or not?? And,where should i insert the zip in odin??
I am using Android 2.3.3 on my Galaxy S i9000.... can i root it using 'Super-one-click'.....??
Guys,got a little problem...i flashed the STOCK firmware,but all i get is bootloop! I flashed latest version (2.3.6)
Will you root best cf-root kernel version of your firmware .. otherwise superoneclick must be on the GB.
---------- Post added at 07:37 PM ---------- Previous post was at 07:36 PM ----------
Wolf80 said:
Guys,got a little problem...i flashed the STOCK firmware,but all i get is bootloop! I flashed latest version (2.3.6)
Click to expand...
Click to collapse
It fw.pro samsung galaxy, you have a signature in a different model?
Now that i remember,before installing CM9,I had Gingerbread 2.3.6 and when the phone was booting up i had vodafone logo..
Wolf80 said:
Now that i remember,before installing CM9,I had Gingerbread 2.3.6 and when the phone was booting up i had vodafone logo..
Click to expand...
Click to collapse
After this, I recommend flash stock 3 fw.s pit.512 file and re-partition.
Flashing with 3 files now,i'll let you know!
misacek said:
After this, I recommend flash stock 3 fw.s pit.512 file and re-partition.
Click to expand...
Click to collapse
Maybe XXJVP 2.3.4, pda, modem, csc, and re-pit512 partition.Je version of it that helped me ..
Wolf80 said:
Flashing with 3 files now,i'll let you know!
Click to expand...
Click to collapse
3-files (PDA, Phone, CSC) & re-partition (w/ 512.pit) is mandatory when coming from CM7/9/10, since those are using different flash layout (MTD vs. BML). So just grab some stock rom (JW4 for example) and flash it.
Only tick re-partition (leave other settings as they were) (SGS bootloaders aint locked so no need to worry about those..)
You should be fine with these instructions..I have flashed my phone several times like this (back from CM9 etc..)
Edit: btw, this topic should be in Q&A..
Why is everyone is replying ?Wrong section ..This is not a Q/A Section ..Please don't reply
Before i also mention that you posted in the wrong section:
You need to flash a PIT file and not only tick repartition, how should the partition layout gets changed if you don't choose one to change to??
Now that you know it:
WRONG SECTION!
Tutorial for Making A CWM Flashable Modem
Many find it hard to get the specific modem (baseband) that is compatible with the ROM that they are using (flashing custom ROMs will still retain the baseband). Luckily, there is this thread [Bootloader] [Official Stock Firmwares , Kernels & Modems For i9100g] by neerajganga
However, not all modems are provided. Instead of whining and giving up hope and start the tedious process of flashing a stock firmware all over again just for the right baseband, why not make your own CWM flashable zip? It's really simple...
Instructions:
1. Download the right firmware (the one that contains the modem you require).
2. Change the extension of the firmware from .md5 to .tar (just delete off the .md5 by renaming the file and make sure the name ends with .tar)
3. Now you can open the firmware with Winrar or 7zip.
4. Extract modem.bin.
5. Download this preset CWM zip (with DXLP6 modem) modem_updater_i9100g.zip and replace the modem.bin inside the downloaded file with the one you just extracted. DO NOT modify other files.
6. You just made yourself a CWM zip with the modem of your choice...
Nyc :good:
nice, my friend got a problem with modem,
Ryuinferno said:
Tutorial for Making A CWM Flashable Modem
Many find it hard to get the specific modem (baseband) that is compatible with the ROM that they are using (flashing custom ROMs will still retain the baseband). Luckily, there is this thread [Bootloader] [Official Stock Firmwares , Kernels & Modems For i9100g] by neerajganga
However, not all modems are provided. Instead of whining and giving up hope and start the tedious process of flashing a stock firmware all over again just for the right baseband, why not make your own CWM flashable zip? It's really simple...
Instructions:
1. Download the right firmware (the one that contains the modem you require).
2. Change the extension of the firmware from .md5 to .tar (just delete off the .md5 by renaming the file and make sure the name ends with .tar)
3. Now you can open the firmware with Winrar or 7zip.
4. Extract modem.bin.
5. Download this preset CWM zip (with DXLP6 modem) modem_updater_i9100g.zip and replace the modem.bin inside the downloaded file with the one you just extracted. DO NOT modify other files.
6. You just made yourself a CWM zip with the modem of your choice...
Remember to click the thanks button if you find my post useful!
Click to expand...
Click to collapse
Thanks bro...I was wondering if an I9100 modem firmware work for an I9100G model? B'coz the G model has no existing firmware for my country not even IN GB...
Nope...cause different hardware...
Ryuinferno said:
Nope...cause different hardware...
Click to expand...
Click to collapse
thanks bro...Man I guess I'll get stuck with the Malaysian modem then...
i cannot update my modem. while i try flasing through cwm i'm facing with "installation aborted" error.
What kind of error? You will see a status ? (number)...may I know what number is that?
Ryuinferno said:
What kind of error? You will see a status ? (number)...may I know what number is that?
Click to expand...
Click to collapse
7
What model are you using? This modem updater is for the GT-I9100G......or you are currently using SuperICS kernel?
yes. i recognized shortly before it's due to superics. i cannot flash anything thanks for helping .
Thank you so much @Ryuinferno , you saved my ass Your method worked on my S4 GT-I9500
Thank you Ryu , i learned something new today
Thanks for this info. Is it also possible to flash this zip via TWRP (running on Omnirom 4.4) or is it CWM only?
Should work for both
Hi,
today I flashed this ROM : http://forum.xda-developers.com/showthread.php?t=2178346 from rarog. Working fine, but after flashing, no CSC is shown with *#1234*.
Something I have to think about ?
regards
Michael
Flash back stock recovery and flash firmware again.
Then you can go back to cwm again.
I've noticed that cwm can't seem to handle the csc.zip update upon reboot correctly. This worked for me.:good:
Edit : You can also try to flash same firmware as CSC in Odin.
if you have cwm-recovery try this .zip sec_csc_XXAMBA3-for-cwm.zip - 33.43 MB :good:
mkruseonline said:
Hi,
today I flashed this ROM : http://forum.xda-developers.com/showthread.php?t=2178346 from rarog. Working fine, but after flashing, no CSC is shown with *#1234*.
Something I have to think about ?
regards
Michael
Click to expand...
Click to collapse
Have you flashed with Odin? I had this problem with CSC once with a previous firmware. Affter reflashing, all the CSC were back.
enox.co said:
if you have cwm-recovery try this .zip sec_csc_XXAMBA3-for-cwm.zip - 33.43 MB :good:
Click to expand...
Click to collapse
Yes, I have cwm-recovery.
I will try this. Something I have to look at ?
And yes, I flashed with ODIN (2 Times) - same result.
tys0n said:
Flash back stock recovery and flash firmware again.
Then you can go back to cwm again.
I've noticed that cwm can't seem to handle the csc.zip update upon reboot correctly. This worked for me.
Click to expand...
Click to collapse
Where can I get Stock recovery ?
regards
Michael
mkruseonline said:
Yes, I have cwm-recovery.
I will try this. Something I have to look at ?
And yes, I flashed with ODIN (2 Times) - same result.
Where can I get Stock recovery ?
regards
Michael
Click to expand...
Click to collapse
just flash the .zip with cwm and reboot ....
enox.co said:
if you have cwm-recovery try this .zip sec_csc_XXAMBA3-for-cwm.zip - 33.43 MB :good:
Click to expand...
Click to collapse
Hi,
CSC is back.
Thank you :good:
regards
Michael
I8190ojvamc1
plz could u make a file for I8190OJVAMC1
...if someone can upload that sec_CSC.zip
Sent from my Nexus 4 using xda premium
how to upload it
so how we can get the file sec_csc.zip for I8190OJVAMC1
dr_kamhawy said:
so how we can get the file sec_csc.zip for I8190OJVAMC1
Click to expand...
Click to collapse
You'll need linux or cygwin I think.
Download fw and extract the cache.img from it if i'm not mistaken.
you need to unpack your firmware ( .tar.md5 ) with 7.zip ... inside your firmware is a cache.img ....take the cache.img and upload it and post the link here ..... i will convert it and make a sec_csc_cwm_flashable.zip ....
Hello,
I want to flash stock firmware from SamMobile, but my country is not there on the list,
So which firmware should I choose? I don't want to mess up things like modem or IMEI..
Thanks
verynoob said:
Hello,
I want to flash stock firmware from SamMobile, but my country is not there on the list,
So which firmware should I choose? I don't want to mess up things like modem or IMEI..
Thanks
Click to expand...
Click to collapse
If you use Odin you won't lose your IMEI number but yes you'll change your modem... flashing a full package might change it, but I'm not sure. In full package roms "PHONE" file contains modem's data... I've never tried to flash a rom without this file...or simply changing this file but it could be a posibility :S:S:S
Where are you from? Maybe we could find a flashable CWM modem file
Viper The Ripper said:
If you use Odin you won't lose your IMEI number but yes you'll change your modem... flashing a full package might change it, but I'm not sure. In full package roms "PHONE" file contains modem's data... I've never tried to flash a rom without this file...or simply changing this file but it could be a posibility :S:S:S
Where are you from? Maybe we could find a flashable CWM modem file
Click to expand...
Click to collapse
thanks,
so what exactly is this modem? I mean, isn't the S5830 an international phone? so why does it need to have so many different modem types..
can I somehow save my current modem and install it later after flashing stock firmware?
verynoob said:
thanks,
so what exactly is this modem? I mean, isn't the S5830 an international phone? so why does it need to have so many different modem types..
can I somehow save my current modem and install it later after flashing stock firmware?
Click to expand...
Click to collapse
Modem file contains data related with wireless connectivity, radio, network communications...
Yes you can to backup your current modem data, creating a flashable zip via CWM
Here it is the script
BACK UP YOUR ROM'S MODEM
1. Flash this zip via CWM
2. When the script finish you'll get a flashable zip in /sdcard/Backup_Modem with your current modem files
Original Thread by Lovetz
Viper The Ripper said:
Modem file contains data related with wireless connectivity, radio, network communications...
Yes you can to backup your current modem data, creating a flashable zip via CWM
Here it is the script
BACK UP YOUR ROM'S MODEM
1. Flash this zip via CWM
2. When the script finish you'll get a flashable zip in /sdcard/Backup_Modem with your current modem files
Original Thread by Lovetz
Click to expand...
Click to collapse
Thanks
Btw, I've done everything done by the instructions and now I am in a bootloop with Samsung logo..
I put the .OPS file , and checked "One Package" , chose the ".tar.md5" firmware that I downloaded from SamMobile, and I am stuck in samsung's logo
verynoob said:
Thanks
Btw, I've done everything done by the instructions and now I am in a bootloop with Samsung logo..
I put the .OPS file , and checked "One Package" , chose the ".tar.md5" firmware that I downloaded from SamMobile, and I am stuck in samsung's logo
Click to expand...
Click to collapse
Always you flash a stock rom via Odin, you'll need to boot into stock recovery and do wipe data/factory reset and wipe cache partition to avoid the bootloop.
Then enjoy!
Viper The Ripper said:
Always you flash a stock rom via Odin, you'll need to boot into stock recovery and do wipe data/factory reset and wipe cache partition to avoid the bootloop.
Then enjoy!
Click to expand...
Click to collapse
Omg I did that before watching your comment and I came here to say " nvm it worked after I did factory reset and wiped cache" but you replied too quickly!
Thank you for your quick support :cyclops:
verynoob said:
Omg I did that before watching your comment and I came here to say " nvm it worked after I did factory reset and wiped cache" but you replied too quickly!
Thank you for your quick support :cyclops:
Click to expand...
Click to collapse
You are welcome!
Viper The Ripper said:
You are welcome!
Click to expand...
Click to collapse
Hi again :laugh: I am facing a problem now with all of these stock firmwares, my original stock firmware had RTL fix , so that the phone can support right-to-left languages, but since SamMobile does not have the rom of my country, what can I do to fix the RTL problem? maybe there is another stock firmware on the SamMobile list that you can see , and might have RTL fix?
Thanks again !
verynoob said:
Hi again :laugh: I am facing a problem now with all of these stock firmwares, my original stock firmware had RTL fix , so that the phone can support right-to-left languages, but since SamMobile does not have the rom of my country, what can I do to fix the RTL problem? maybe there is another stock firmware on the SamMobile list that you can see , and might have RTL fix?
Thanks again !
Click to expand...
Click to collapse
You can try this, it should work in whatever GB rom
You'll need root and CWM to try it, do a backup first (CWM 5.0.2.6 Fixed) in case things get ugly
Turorial by Ahmed hamouda
http://forum.xda-developers.com/showthread.php?t=1970521
Tutorial by s-android
http://forum.xda-developers.com/showthread.php?t=1228753
Hello guys..
i have downloaded a firmware of another country from sammobile because my country is not listed there and when i flashed it with odin, my sim card is not working, its wtf.. can anyone help?? how to choose the right firmware for my samsung galaxy tab 3 ??
Thanks
Viper The Ripper said:
If you use Odin you won't lose your IMEI number but yes you'll change your modem... flashing a full package might change it, but I'm not sure. In full package roms "PHONE" file contains modem's data... I've never tried to flash a rom without this file...or simply changing this file but it could be a posibility :S:S:S
Where are you from? Maybe we could find a flashable CWM modem file
Click to expand...
Click to collapse
zimbabwe
friends
I need a Rom i9305 with separate files (boot, pda, modem, Csc).
To use as Odin
To try to repair a recovered i9305 dead boot
Now he just goes into Download Mode
grateful
Download a stock rom for your area from SamMobile then flash with Odin and reboot
Raistlin1158 said:
Download a stock rom for your area from SamMobile then flash with Odin and reboot
Click to expand...
Click to collapse
More Stock which rom?
Already downloaded over 10 and have not found a partitioned.
All are now up single file
Unzip , then unzip again to get the various components of the rom or go here: http://forum.xda-developers.com/gal...305/index-samsung-galaxy-s3-lte-roms-t2206898
Raistlin1158 said:
Unzip , then unzip again to get the various components of the rom or go here: http://forum.xda-developers.com/gal...305/index-samsung-galaxy-s3-lte-roms-t2206898
Click to expand...
Click to collapse
Thank Intent
Any more of them are Separate.
I need a Rom with the files (boot, pda, modem, Csc). separate