Please help I tried to unbrick my phone with odin and everything went right
It says PASS but the phone on bootanimation logo goes black and stays that way
What should I do??????
marius1985 said:
Please help I tried to unbrick my phone with odin and everything went right
It says PASS but the phone on bootanimation logo goes black and stays that way
What should I do??????
Click to expand...
Click to collapse
Did you have anything else, like pulse blue light ? What software you flash on what phone?
Clicking from notecable N910A
marius1985 said:
Please help I tried to unbrick my phone with odin and everything went right
It says PASS but the phone on bootanimation logo goes black and stays that way
What should I do??????
Click to expand...
Click to collapse
If your phone is ATT S5,
Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Sent from my SAMSUNG-SM-G900A
norbarb said:
Did you have anything else, like pulse blue light ? What software you flash on what phone?
Clicking from notecable N910A
Click to expand...
Click to collapse
Yes the blue light pulse and the screen is off
marius1985 said:
Yes the blue light pulse and the screen is off
Click to expand...
Click to collapse
How long did you wait? If blue light is pulsing means phone is working. Try get to recovery mode and clear cache and davik.
marius1985 said:
Please help I tried to unbrick my phone with odin and everything went right
It says PASS but the phone on bootanimation logo goes black and stays that way
What should I do??????
Click to expand...
Click to collapse
I need more information what did you do that made you have to use Odin? What are you flashing and why? What tar did you use? Which version of Odin?
norbarb said:
How long did you wait? If blue light is pulsing means phone is working. Try get to recovery mode and clear cache and davik.
Click to expand...
Click to collapse
The light stays on, it pulse low to high light. Enter into recovery doesnt do anything. In odin 3.09 it says that PASS when I try to install the stock firmware 4.4.2 SM-G900A G900AUCU1ANCE and the installation was succesfull but when it is on bootanimation of SAMSUNG it freeze the light stays blue, it pulse, the screen goes black and stays that way??
Please let me know
OPOfreak said:
I need more information what did you do that made you have to use Odin? What are you flashing and why? What tar did you use? Which version of Odin?
Click to expand...
Click to collapse
I was trying to install a costum rom and before that I did an advance wipe than the installation fails. than try to go back to stock firmware but this happened.
The light stays on, it pulse low to high light. Enter into recovery doesnt do anything. In odin 3.09 it says that PASS when I try to install the stock firmware 4.4.2 SM-G900A G900AUCU1ANCE and the installation was succesfull but when it is on bootanimation of SAMSUNG it freeze the light stays blue, it pulse, the screen goes black and stays that way??
Please let me know
marius1985 said:
I was trying to install a costum rom and before that I did an advance wipe than the installation fails. than try to go back to stock firmware but this happened.
The light stays on, it pulse low to high light. Enter into recovery doesnt do anything. In odin 3.09 it says that PASS when I try to install the stock firmware 4.4.2 SM-G900A G900AUCU1ANCE and the installation was succesfull but when it is on bootanimation of SAMSUNG it freeze the light stays blue, it pulse, the screen goes black and stays that way??
Please let me know
Click to expand...
Click to collapse
One more question... Were you on 4.4.4 OA1?
OPOfreak said:
One more question... Were you on 4.4.4 OA1?
Click to expand...
Click to collapse
Yes that I installed from the third part of this quote
http://forum.xda-developers.com/att...to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120
marius1985 said:
Yes that I installed from the third part of this quote
http://forum.xda-developers.com/att...to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120
Click to expand...
Click to collapse
That is what I though OK what you need to do is go to the troubleshooting section of that thread and download the G900A downgrade to NCE rar file and extract the G900A downgrade to NCE tar md5 and flash that in the ap slot of Odin 3.09 that will take you back to bone stock NCE then if you want to get back to NG3 rooted follow the steps in this thread exactly the thread is locked but the links are still good.
http://forum.xda-developers.com/showthread.php?p=55133105
OPOfreak said:
That is what I though OK what you need to do is go to the troubleshooting section of that thread and download the G900A downgrade to NCE rar file and extract the G900A downgrade to NCE tar md5 and flash that in the ap slot of Odin 3.09 that will take you back to bone stock NCE then if you want to get back to NG3 rooted follow the steps in this thread exactly the thread is locked but the links are still good.
http://forum.xda-developers.com/showthread.php?p=55133105
Click to expand...
Click to collapse
That is what I said in the 3rd post!lol
Sent from my SAMSUNG-SM-G900A
Waiting4MyAndroid said:
That is what I said in the 3rd post!lol
Sent from my SAMSUNG-SM-G900A
Click to expand...
Click to collapse
I know I knew what you posted but I wanted to make sure he was coming from 4.4.4 I did the exact same thing a couple days ago coming from OA1 it's not a hard fix at all and I wanted to make sure he was clear on what he did.
OPOfreak said:
I know I knew what you posted but I wanted to make sure he was coming from 4.4.4 I did the exact same thing a couple days ago coming from OA1 it's not a hard fix at all and I wanted to make sure he was clear on what he did.
Click to expand...
Click to collapse
The downgrade to NCE (G900A_Downgrade_to_NCE.tar) that @muniz_ri created is a life saver. I have used it many times myself.
Sent from my SAMSUNG-SM-G900A
OPOfreak said:
That is what I though OK what you need to do is go to the troubleshooting section of that thread and download the G900A downgrade to NCE rar file and extract the G900A downgrade to NCE tar md5 and flash that in the ap slot of Odin 3.09 that will take you back to bone stock NCE then if you want to get back to NG3 rooted follow the steps in this thread exactly the thread is locked but the links are still good.
http://forum.xda-developers.com/showthread.php?p=55133105
Click to expand...
Click to collapse
It worked thank you so much my friend
marius1985 said:
It worked thank you so much my friend
Click to expand...
Click to collapse
You're very welcome
solid blue light
will your fix work for that cuz i have a solid blue light and it goes halfway throught the samsung logo then stops and goes black screen
horslvr said:
will your fix work for that cuz i have a solid blue light and it goes halfway throught the samsung logo then stops and goes black screen
Click to expand...
Click to collapse
Can you provide info on what caused the problem? Were you flashing a ROM? What att firmware are you on?
Sent from my SAMSUNG-SM-G900A
ok i was flashing the stock 4.4.2 rom back to the phone using odin 3.09and a firmware fromsamsung that they gave me , but it all started one day when my data signal went hay wire and then somthing glitch and atnt told me to reflash the 4.4.2 firmware
horslvr said:
ok i was flashing the stock 4.4.2 rom back to the phone using odin 3.09and a firmware fromsamsung that they gave me , but it all started one day when my data signal went hay wire and then somthing glitch and atnt told me to reflash the 4.4.2 firmware
Click to expand...
Click to collapse
It should work. Follow the directions mentioned above.
Sent from my SAMSUNG-SM-G900A
Related
I have followed the rooting directions here:
http://forum.xda-developers.com/showthread.php?t=1424997
and the "if nothing else works heres how to root" thread here:
http://forum.xda-developers.com/showpost.php?p=18981227&postcount=4
However, I cannot seem to get the phone rooted. Everything appears to go fine in terms of using Odin to downgrade from 2.3.6 (which I understand cant be rooted, which is why you have to downgrade first), but when the phone restarts it just turns the white back light on and the phone is unresponsive - it doesnt actually boot. I can put it into download mode and put it back to its original ROM (N7000XXLA4), but thats it.
Basically, I am stuck trying to downgrade to root - anyone know what to do?
Try re downloading rom.. Sometimes downloaded files may corrupted somehow..
Sent from my GT-N7000 using xda premium
LightinDarkness said:
I have followed the rooting directions here:
http://forum.xda-developers.com/showthread.php?t=1424997
and the "if nothing else works heres how to root" thread here:
http://forum.xda-developers.com/showpost.php?p=18981227&postcount=4
However, I cannot seem to get the phone rooted. Everything appears to go fine in terms of using Odin to downgrade from 2.3.6 (which I understand cant be rooted, which is why you have to downgrade first), but when the phone restarts it just turns the white back light on and the phone is unresponsive - it doesnt actually boot. I can put it into download mode and put it back to its original ROM (N7000XXLA4), but thats it.
Basically, I am stuck trying to downgrade to root - anyone know what to do?
Click to expand...
Click to collapse
Re-download a rootable rom form the above thread. Flash it via pc odin. And boot it. If it is struck at boot try clearing the caches in the Samsung recovery and reboot. Then download the corresponding cf kernel file and run root me now.bat after verifying that the zImage file is int he folder.
Try and let know your results!!
Cheers!
Hit thanks if it helped!
PLease help,
i tried to do an update to AT&T sm g900a . my fw was 4.4.2 ng3. and i tired to flash nd3 and tried to flash oc1. but my phone stuck wit open padlock. then i flash stock partitions on oc4. then it could not on the phone.(i belive it automaticaly select re-partitions). then it only turn on upto samsumng log and stuck there. after 5 sec it reboot again.
i tried a stock rom flash with odin 3files Ap, cp & CSC. but it is not recovering. then i think i do erase the nand erase all.
i have also .pit file for SM g900A 16gb, and also tried to flash the pit file by checking re-partitions in odin3.
nothing work out. then i tried to flash single ap file but it is failed.
kindly give some advise,
Jstn Antony said:
PLease help,
i tried to do an update to AT&T sm g900a . my fw was 4.4.2 ng3. and i tired to flash nd3 and tried to flash oc1. but my phone stuck wit open padlock. then i flash stock partitions on oc4. then it could not on the phone.(i belive it automaticaly select re-partitions). then it only turn on upto samsumng log and stuck there. after 5 sec it reboot again.
i tried a stock rom flash with odin 3files Ap, cp & CSC. but it is not recovering. then i think i do erase the nand erase all.
i have also .pit file for SM g900A 16gb, and also tried to flash the pit file by checking re-partitions in odin3.
nothing work out. then i tried to flash single ap file but it is failed.
kindly give some advise,
Click to expand...
Click to collapse
Try this,
http://forum.xda-developers.com/showthread.php?p=60012961
Waiting4MyAndroid said:
Try this,
http://forum.xda-developers.com/showthread.php?p=60012961
Click to expand...
Click to collapse
hi thank you, i tried this but now it is stuck on galaxy s5 logo with unlocked padlock. and there no reboot , just stay the phone on. no way to switch off except take out the battery.
please advise
Mine was like this and I also tried the above to no avail....the only way I found around it was to take it in to ATT store and have them "re-flash the Lolipop update" Wiped my phone but it works, now I just have to wait (patiently) for root exploit for the OTA 5.0.
twocrows said:
Mine was like this and I also tried the above to no avail....the only way I found around it was to take it in to ATT store and have them "re-flash the Lolipop update" Wiped my phone but it works, now I just have to wait (patiently) for root exploit for the OTA 5.0.
Click to expand...
Click to collapse
thank you, any one have better idea other than this. can we do complete reflash the os on samsung sm g900a At&t?
please help
Jstn Antony said:
thank you, any one have better idea other than this. can we do complete reflash the os on samsung sm g900a At&t?
please help
Click to expand...
Click to collapse
i flashed full stock 4.4.2 nce but still it is stuck in the sammsung boot logo...
Jstn Antony said:
i flashed full stock 4.4.2 nce but still it is stuck in the sammsung boot logo...
Click to expand...
Click to collapse
Try factory reset from recovery.
Jstn Antony said:
i flashed full stock 4.4.2 nce but still it is stuck in the sammsung boot logo...
Click to expand...
Click to collapse
Which file did you flash
archie87 said:
Which file did you flash
Click to expand...
Click to collapse
i flashed 4.4.2 nce stock rom, by odin containing 4 files BL,AP, CP, CSC (BL didn't used)
i believed that it happened to me like stuck on Samsung logo at first time, when i flashed oc4 stock partitions to my 4.4.2 ng3 .
after that it never rebooted.
when i try to from sdcard it will say e/footer is wrong, something like that.
but somebody told me that i can adb and what is that ? it will help me or not?
kindly advise....
Jstn Antony said:
i flashed 4.4.2 nce stock rom, by odin containing 4 files BL,AP, CP, CSC (BL didn't used)
i believed that it happened to me like stuck on Samsung logo at first time, when i flashed oc4 stock partitions to my 4.4.2 ng3 .
after that it never rebooted.
when i try to from sdcard it will say e/footer is wrong, something like that.
but somebody told me that i can adb and what is that ? it will help me or not?
kindly advise....
Click to expand...
Click to collapse
Flash this file instead and you should be back to normal.
http://forum.xda-developers.com/att...w-to-unbrick-flash-to-stocknce-g900a-t3077652
archie87 said:
Flash this file instead and you should be back to normal.
http://forum.xda-developers.com/att...w-to-unbrick-flash-to-stocknce-g900a-t3077652
Click to expand...
Click to collapse
thank you i am trying to download this file. but i could not success due to bad internet. before i tried almost same single fie in the ap folder of odin. but it was not success.
but iwil try this and give you the updates...
Hi Archie
Big thank you, its great working Back to normal...
archie87 said:
Flash this file instead and you should be back to normal.
http://forum.xda-developers.com/att...w-to-unbrick-flash-to-stocknce-g900a-t3077652
Click to expand...
Click to collapse
Sweet! I was in the same boat and saw the post about getting stuck on the Samsung screen. This solution worked perfectly!
Thanks!
I am running Alliance 9.1 rom and I was searching for my Safestrap recovery. I didn't find it and so I tried busybox "reboot into recovery" script. Doing that made my phone go crazy "go to att and let the service tech" look at it. I can't boot into recovery as it gives me this error and I have to use ODIN to flash the BL file. Now I can't get into my phone because of a Pin. I think that the script from busy box is still running and if I can get passed my pin, I want to see if I can disable the script. My main issue is, can I use the aforementioned process to just start over? I was told I cannot use ODIN to flash to stock rom. I have already found out that I have tripped my knox counter. PLEASE HELP. THIS IS MY ONLY PHONE AND MY WIFE IS GOING TO KILL ME.
Thank you for your help.:crying:
dwarftoaf said:
I am running Alliance 9.1 rom and I was searching for my Safestrap recovery. I didn't find it and so I tried busybox "reboot into recovery" script. Doing that made my phone go crazy "go to att and let the service tech" look at it. I can't boot into recovery as it gives me this error and I have to use ODIN to flash the BL file. Now I can't get into my phone because of a Pin. I think that the script from busy box is still running and if I can get passed my pin, I want to see if I can disable the script. My main issue is, can I use the aforementioned process to just start over? I was told I cannot use ODIN to flash to stock rom. I have already found out that I have tripped my knox counter. PLEASE HELP. THIS IS MY ONLY PHONE AND MY WIFE IS GOING TO KILL ME.
Thank you for your help.:crying:
Click to expand...
Click to collapse
If you can get to download mode, then you should be able to flash ALL four files in Odin which will wipe your phone clean [100% Stock] Lollipop 5.0 (N900AUCUEOC1) Odin Tars http://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 OR N900AUCUCNC2 ODIN Files http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136 Use all four this way your will wipe your phone. Can't help with Knox, once tripped that's it. Always do a "normal install" with busybox.
Whats the Difference?
Rooted i747 said:
If you can get to download mode, then you should be able to flash ALL four files in Odin which will wipe your phone clean [100% Stock] Lollipop 5.0 (N900AUCUEOC1) Odin Tars http://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 OR N900AUCUCNC2 ODIN Files http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136 Use all four this way your will wipe your phone. Can't help with Knox, once tripped that's it. Always do a "normal install" with busybox.
Click to expand...
Click to collapse
Thank you for your reply, I am down loading the (XXXXXXXcueoc1) files now, but I have all the files for the (XXXXXXXcucnc2) what is the difference of the two?
ALSO should I use the .pit file I have for it? HLTE_USA_ATT.pit?
dwarftoaf said:
Thank you for your reply, I am down loading the (XXXXXXXcueoc1) files now, but I have all the files for the (XXXXXXXcucnc2) what is the difference of the two?
ALSO should I use the .pit file I have for it? HLTE_USA_ATT.pit?
Click to expand...
Click to collapse
OC1 is Lollipop and NC2 is Kitkat. You can't root OC1 and NC2 you can. You wouldn't need the PIT file.
This is what i have so Far, Please help
Rooted i747 said:
If you can get to download mode, then you should be able to flash ALL four files in Odin which will wipe your phone clean [100% Stock] Lollipop 5.0 (N900AUCUEOC1) Odin Tars http://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 OR N900AUCUCNC2 ODIN Files http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136 Use all four this way your will wipe your phone. Can't help with Knox, once tripped that's it. Always do a "normal install" with busybox.
Click to expand...
Click to collapse
This is what is hapening right now:
Com port one is not opening
but two is doing all the work....
did i fup my phone?
dwarftoaf said:
This is what is hapening right now:
Com port one is not opening
but two is doing all the work....
did i fup my phone?
Click to expand...
Click to collapse
Is your phone in download mode and connected to computer?
Thank you !!!!!!!!!!!
Rooted i747 said:
OC1 is Lollipop and NC2 is Kitkat. You can't root OC1 and NC2 you can. You wouldn't need the PIT file.
Click to expand...
Click to collapse
THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU !!!!
IVE been reading through all the posts and i was just needing the help from someone that i'll all be okay!!!!!
THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU !!!
I shall sing your praises for all time!
COM number like mine shows 4 don't mean nothing. Just means it's connected.
Seems Good now
Rooted i747 said:
COM number like mine shows 4 don't mean nothing. Just means it's connected.
Click to expand...
Click to collapse
The phone booted and I've gone through the process. I was in download and while it did say "fail" on the com1 slot, the com 2 slot "passed" and I'm going through the setup process now. I am just happy I don't have an 800.00 brick.
Thank you so much for your help and I do appreciate your responses as I am new to this. I will most likely put alliance back on unless you have a Rom you use currently that you would recommend?
dwarftoaf said:
The phone booted and I've gone through the process. I was in download and while it did say "fail" on the com1 slot, the com 2 slot "passed" and I'm going through the setup process now. I am just happy I don't have an 800.00 brick.
Thank you so much for your help and I do appreciate your responses as I am new to this. I will most likely put alliance back on unless you have a Rom you use currently that you would recommend?
Click to expand...
Click to collapse
When you put the Alliance rom on it and to get to safestrap all you have to do is hold your power button have a sec and click restart then safestrap. BUT after you flash anything you have to flash the OC1 Kernel before leaving safestrap.
This just harder
Rooted i747 said:
When you put the Alliance rom on it and to get to safestrap all you have to do is hold your power button have a sec and click restart then safestrap. BUT after you flash anything you have to flash the OC1 Kernel before leaving safestrap.
Click to expand...
Click to collapse
NOOB QUESTION:
What is the OC1 Kernal and what does it do. Sorry I am taking up your time.
dwarftoaf said:
NOOB QUESTION:
What is the OC1 Kernal and what does it do. Sorry I am taking up your time.
Click to expand...
Click to collapse
It does a lot http://www.androidcentral.com/android-z-what-kernel
Education
Rooted i747 said:
It does a lot http://www.androidcentral.com/android-z-what-kernel
Click to expand...
Click to collapse
Thank you again for all your help! I will do more research and education before I mess with it again. I will root, and take off the bloatware and use the phone until i can get a hold of an experimental phone I can use.
Thank you again for all your Help!
Okay so I first rooted my 4.4.2 at&t g900a s5 with towelroot successfully. I then flashed a lollipop firmware with flashify directly from my phone and that firmware came with root. I didnt like lollipop so I flashed my orginal firmware (4.4.2) through odin and ended up sort of bricking my s5. When I turn it on, it goes in boot and makes the screen black and has a blue LED on top that stays on forever. I fixed the problem with this website:
http://www.galaxys5update.com/fix-black-screen-with-pulsating-blue-led-on-galaxy-s5-g900a/
I followed the steps and flashed the partition one first and got to the boot screen of the s5 and it had the lock symbol and said "custom" and paused there forever. I tried the modem one after it, but then the EXACT same thing happened with the partition one. All I want is to go back to stock or to lollipop or whatever, just a working phone. I tried factory resetting and wiping cache but nothing worked. PLEASE HELP ASAP
Hadi12317 said:
Okay so I first rooted my 4.4.2 at&t g900a s5 with towelroot successfully. I then flashed a lollipop firmware with flashify directly from my phone and that firmware came with root. I didnt like lollipop so I flashed my orginal firmware (4.4.2) through odin and ended up sort of bricking my s5. When I turn it on, it goes in boot and makes the screen black and has a blue LED on top that stays on forever. I fixed the problem with this website:
http://www.galaxys5update.com/fix-black-screen-with-pulsating-blue-led-on-galaxy-s5-g900a/
I followed the steps and flashed the partition one first and got to the boot screen of the s5 and it had the lock symbol and said "custom" and paused there forever. I tried the modem one after it, but then the EXACT same thing happened with the partition one. All I want is to go back to stock or to lollipop or whatever, just a working phone. I tried factory resetting and wiping cache but nothing worked. PLEASE HELP ASAP
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3076803
Go to the OP and scroll to the notes section on post #1. In step 5 it has the NCE downgrade firmware. As long as you didn't take the OTA, the downgrade firmware will fix you. Flash it with odin 3.09 in the AP slot.
dirtydodge said:
http://forum.xda-developers.com/showthread.php?t=3076803
Go to the OP and scroll to the notes section on post #1. In step 5 it has the NCE downgrade firmware. As long as you didn't take the OTA, the downgrade firmware will fix you. Flash it with odin 3.09 in the AP slot.
Click to expand...
Click to collapse
I was having the same problem that OP had and your solution just saved me! Thank you so much!!! :good:
i am stuck in a bootloop, i cant even get to recovery. its been like this for weeks, i odin flashed stock firmware like 50 times. i have the stock firmware from sammobile, if you can help that will be great, i pretty sure i tired everything i know of. help would be nice.
re: bootloops
proman505 said:
i am stuck in a bootloop, i cant even get to recovery. its been like this for weeks, i odin flashed stock firmware like 50 times. i have the stock firmware from sammobile, all i need (i hope) is the bootloader and baseband. if you can help that will be great, i pretty sure i tired everything i know of so help would be nice.
Click to expand...
Click to collapse
Which version of the firmware did you odin flash? I have download links for
the baseband and bootloader but I do not want to post the wrong versions.
I am certain of one thing though, your problem is not related at all to the baseband or the bootloader.
If you have successfully odin flashed the proper version of the N910T firmware then you already have
the bootloader and baseband in your phone.
What you really need to do is to go into download mode and odin flash the proper version of twrp.
Then pull the battery and replace it, once it's replaced hold down the volume-up, home key and
the power button at the same time until you feel the phone vibrate, then let go of all the buttons
and the phone will go into twrp recovery.
Once you get there do a full wipe:
System,data, cache and dalvik cache and last but not least do a factory reset.
Once that's done let twrp reboot your phone and you should be good to go except
you will need to odin flash cf-autoroot if you want root access.
Good luck,
Have a great day!
Misterjunky said:
Which version of the firmware did you odin flash? I have download links for
the baseband and bootloader but I do not want to post the wrong versions.
I am certain of one thing though, your problem is not related at all to the baseband or the bootloader.
If you have successfully odin flashed the proper version of the N910T firmware then you already have
the bootloader and baseband in your phone.
What you really need to do is to go into download mode and odin flash the proper version of twrp.
Then pull the battery and replace it, once it's replaced hold down the volume-up, home key and
the power button at the same time until you feel the phone vibrate, then let go of all the buttons
and the phone will go into twrp recovery.
Once you get there do a full wipe:
System,data, cache and dalvik cache and last but not least do a factory reset.
Once that's done let twrp reboot your phone and you should be good to go except
you will need to odin flash cf-autoroot if you want root access.
Good luck,
Have a great day!
Click to expand...
Click to collapse
N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar
That's the one i am flashing via odin. i opened kies restored everything i put my model # and serial # it installed the latest version of the stock firmware, i still have the same problem. my model # (on the back of the phone) SM-N910T
Okay, you don't need the bootloader or the base band.
Follow the instructions I posted for you.
Good luck!
Sent from my SM-G928T using Tapatalk
Misterjunky said:
Okay, you don't need the bootloa der or the base band.
Follow the instructions I posted for you.
Good luck!
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
i did, same problem. it seems like im the only one having this problem, nothing is helping.
proman505 said:
i did, same problem. it seems like im the only one having this problem, nothing is helping.
Click to expand...
Click to collapse
Okay, then odin flash the "N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar"
again, reboot the phone into download mode but before you do, remove and replace the battery.
Once in download mode go ahead and odin flash the "N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar".
Then go back into download mode and odin flash the twrp recovery. (first remove and replace the battery)
Be SURE you use the proper version of twrp before you odin
flash it, the proper version for N910T is "twrp trtetmo 2.8.7.0" ...
If the above don't work for you then you must not be following
the instructions 100% to a "T" ...
Good luck!
Misterjunky said:
Okay, then odin flash the "N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar"
again, reboot the phone into download mode but before you do, remove and replace the battery.
Once in download mode go ahead and odin flash the "N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar".
Then go back into download mode and odin flash the twrp recovery. (first remove and replace the battery)
Be SURE you use the proper version of twrp before you odin
flash it, the proper version for N910T is "twrp trtetmo 2.8.7.0" ...
Good luck!
Click to expand...
Click to collapse
i'll try that. thanks in advance
Misterjunky said:
Okay, then odin flash the "N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar"
again, reboot the phone into download mode but before you do, remove and replace the battery.
Once in download mode go ahead and odin flash the "N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar".
Then go back into download mode and odin flash the twrp recovery. (first remove and replace the battery)
Be SURE you use the proper version of twrp before you odin
flash it, the proper version for N910T is "twrp trtetmo 2.8.7.0" ...
If the above don't work for you then you must not be following
the instructions 100% to a "T" ...
Good luck!
Click to expand...
Click to collapse
i did exactly what it says, same problem. odin says pass on every flash. im about to go throw this phone in the trash this is really pissing me off
Just call tmobile tell them that the phone died and get a replacement. OK, why don't you try installing an older firmware?
justice26 said:
Just call tmobile tell them that the phone died and get a replacement. OK, why don't you try installing an older firmware?
Click to expand...
Click to collapse
i did they said i voided the warranty. i guess this note 4 is gonna be my new coaster
Quick question, what firmware version were you at before this started and have you tried installing an older or newer version like LP for example?. Also verify you are downloading the correct version for your model.