Related
http://forum.xda-developers.com/xposed/official-xposed-lollipop-t3030118
go flash
Not working for me. Anyone get it to work on the N6?
Nobody with an N6 has reported it working so far in the Xposed thread. Kinda frustrating that the most important Android phone out is the only one that can't seem to get it going.
Rovo89 says, Note that this is still an alpha version and for Lollipop on ARMv7+ devices only. Please install it only if you're willing to take the risk of boot loops. Just because it's working fine and stable for me doesn't mean it will work for everyone the same way.
Sane1 said:
Not working for me. Anyone get it to work on the N6?
Click to expand...
Click to collapse
nope not here but wont be long by the looks of it
There's a second upload that works on the n6. Check the op. But it only works after a soft reboot for me, if I do a full reboot it won't work.
stacio88 said:
There's a second upload that works on the n6. Check the op. But it only works after a soft reboot for me, if I do a full reboot it won't work.
Click to expand...
Click to collapse
See thread in n6 general. Yea you have to soft reboot to have xposed run after you are in permissive mode for selinux. Its the only way right now. If you full reboot, xposed runs before selinux is permissive
Would love to have it was excited now disappointed. Owell guess I'll wait it out along with everyone else
stacio88 said:
There's a second upload that works on the n6. Check the op. But it only works after a soft reboot for me, if I do a full reboot it won't work.
Click to expand...
Click to collapse
That's likely your kernel not allowing it to write to system. I could be wrong though but this happened to me on jellybean.
troyd28 said:
Would love to have it was excited now disappointed. Owell guess I'll wait it out along with everyone else
Click to expand...
Click to collapse
Works great what's up with yours
Can't find the second link that works on the nexus 6
Jeremiah_1988 said:
Can't find the second link that works on the nexus 6
Click to expand...
Click to collapse
You don't need a second link download the two files. Download selinux make sure you set permissions to permissive. Boot into recovery flash framework, boot up install xposed, reboot into recovery again install framework. If it does not active do a soft reboot in xposed
Sent from my Nexus 6 using XDA Free mobile app
What modules are actually working on our gadget please?
I got RootCloak working. To verify this I opened Soft Card before Xposed was installed and it detected root. After Xposed was installed, I then installed RootCloak, checked the box in modules, added Soft Card in the app. Then I went back to Xposed and did a soft reboot. Then I rechecked Soft Card and it worked!
marvi0 said:
What modules are actually working on our gadget please?
Click to expand...
Click to collapse
i got youtube away and gel settings there the only ones ive tried so far
Crappalinks works.
jaythenut said:
i got youtube away and gel settings there the only ones ive tried so far
Click to expand...
Click to collapse
brizey said:
Crappalinks works.
Click to expand...
Click to collapse
Great that's a good start at least. Haven't used exposed for so long, so got used to not having it.
jaythenut said:
Works great what's up with yours
Click to expand...
Click to collapse
Didn't install it yet. It seems to be a process besides most features I used were implemented on lollipop so I shall wait.
jaythenut said:
i got youtube away and gel settings there the only ones ive tried so far
Click to expand...
Click to collapse
Any one get the app DPI settings mod to work.??? Only thing I'm interested in from closed at the moment.
Sent from my Nexus 6 using XDA Free mobile app
stafly17 said:
Any one get the app DPI settings mod to work.??? Only thing I'm interested in from closed at the moment.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
It works, but I did not get the results I wanted. It may be the way lollipop handles things, but i tried to get the tablet style settings by picking a high resolution and it worked but was all crammed in the middle. So...the xposed module works, but lollipop may give you some trouble.
Has anyone deodex and successfully installed a stock system image yet? I haven't tried this yet but I am thinking of giving it a shot sometime soon. I was wondering if there were any potential issues of doing this such as wifi calling or what not. The reason I'm doing this is because I'm s-off'd and I'm hoping a deodexed system will allow xposed to successfully work.
minotauri said:
Has anyone deodex and successfully installed a stock system image yet? I haven't tried this yet but I am thinking of giving it a shot sometime soon. I was wondering if there were any potential issues of doing this such as wifi calling or what not. The reason I'm doing this is because I'm s-off'd and I'm hoping a deodexed system will allow xposed to successfully work.
Click to expand...
Click to collapse
well, i deodexed the arm64 system files using svadeodexer and flashed it to my phone. we'll see what happens...
minotauri said:
well, i deodexed the arm64 system files using svadeodexer and flashed it to my phone. we'll see what happens...
Click to expand...
Click to collapse
Any luck? A deodexed rom would be a huge help for the development community to work on this phone, especially with WiFi calling and voice over lte.
I made a flashable zip, but forgot to change permissions on the apk's on it. It still booted up into android and then android performed it's "upgrading" function at startup and then it rebooted into a bootloop. I had to go somewhere so I ended up flashing back my backup and have not gotten back to it since then as I just got home. I'll try it some more tomorrow or over the weekend.
Any luck on the deodex process? If you need a tester, I'd be glad to help.
jmwils3 said:
Any luck on the deodex process? If you need a tester, I'd be glad to help.
Click to expand...
Click to collapse
same here would love to help.
Hi,
No I haven't had time to work on it any further. I am using a mac so the deodex arm64 tools are all in windows so that's been one challenge, but I was able to do some of that work on my work laptop. The other issue is that I am having trouble getting my updater binary to work. It's failing in TWRP. I'm going to set up a linux environment and install archikitchen when I have more free time, but I've been pretty busy lately.
For whatever reason, I was able to get my original zip to install and reboot and even do the android upgrading function, but then it rebooted into a bootloop. I revised the script to set permissions properly, but then it just fails updating. Sighs.
I'm not sure what I'm doing wrong. I made a few different attempts at system images but all cause bootloops. I may have to try re-doing the deodex part again, but I used my own zip and script as well as one generated by ArchiKitchen and all caused bootloops, so it's probably my deodex files failing. Will try again when I have more free time.
minotauri said:
I'm not sure what I'm doing wrong. I made a few different attempts at system images but all cause bootloops. I may have to try re-doing the deodex part again, but I used my own zip and script as well as one generated by ArchiKitchen and all caused bootloops, so it's probably my deodex files failing. Will try again when I have more free time.
Click to expand...
Click to collapse
heres a link to a deodexed Tmobile stockish rom that we were working on for a bit, but havent had time to add to much to it. has just a few basic addons and has been fully optimized. based on the .33 tmo base.
https://www.androidfilehost.com/?fid=23991606952596069
steal25 said:
heres a link to a deodexed Tmobile stockish rom that we were working on for a bit, but havent had time to add to much to it. has just a few basic addons and has been fully optimized. based on the .33 tmo base.
https://www.androidfilehost.com/?fid=23991606952596069
Click to expand...
Click to collapse
Thanks! This took a long time to do an initial boot but it works and I didn't wipe data and kept stock kernel. Also xposed was installed without bootloop and s-off, though i waited to install it after initial boot. So big thanks!
Sent from my HTC One M9 using XDA Free mobile app
minotauri said:
Thanks! This took a long time to do an initial boot but it works and I didn't wipe data and kept stock kernel. Also xposed was installed without bootloop and s-off, though i waited to install it after initial boot. So big thanks!
Sent from my HTC One M9 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah deodexed roms take considerably longer then odexed roms. I think I clocked 19minutes from the time I rebooted from recovery till android was done optimizing.
minotauri said:
Thanks! This took a long time to do an initial boot but it works and I didn't wipe data and kept stock kernel. Also xposed was installed without bootloop and s-off, though i waited to install it after initial boot. So big thanks!
Sent from my HTC One M9 using XDA Free mobile app
Click to expand...
Click to collapse
Did you ever get your deodexed rom to work, or did you give up on that after getting the one posted by @Steel25? I've deodexed mine using the same tool as you, but now I'm stuck on how to get it to install on my device. All of the info that seems to be out there for this pertains to 32 bit roms, and doesn't seem to work on this one. I really appreciate the one provided by @Steel25, but I also really want to accomplish this myself. If someone can help me do this please post or link or PM me. Thank you in advance.
jbfountain said:
Did you ever get your deodexed rom to work, or did you give up on that after getting the one posted by @Steel25? I've deodexed mine using the same tool as you, but now I'm stuck on how to get it to install on my device. All of the info that seems to be out there for this pertains to 32 bit roms, and doesn't seem to work on this one. I really appreciate the one provided by @Steel25, but I also really want to accomplish this myself. If someone can help me do this please post or link or PM me. Thank you in advance.
Click to expand...
Click to collapse
I am currently just using the ROM that @steal25 posted. I tried several things and for whatever reason, I couldn't get it working except for my initial time but that restarted into a bootloop. Archikitchen also doesnt have a deodexer for lollipop, so if there's a some info on what would work let me know.
A lot of things have happened in my personal life that has taken up a lot of my time so I dont have too much time to tinker around with this stuff lately.
I am currently using the one posted by @Steel25 with Xposed using Xtended settings, and everything is working well. My only complaint is that the cores 4-7 can only be clocked to a maximum of 1.5GHZ. However, I am still searching for a way to properly deodex the stock rom and make it installable.
I Truly Enjoy XDA-Developers.com with this Fabulous HTC One M9
steal25 said:
heres a link to a deodexed Tmobile stockish rom that we were working on for a bit, but havent had time to add to much to it. has just a few basic addons and has been fully optimized. based on the .33 tmo base.
Click to expand...
Click to collapse
Been running awesome, thanks. Any chance of updating this to the 5.1 update?
m9droid said:
Been running awesome, thanks. Any chance of updating this to the 5.1 update?
Click to expand...
Click to collapse
+1, would love to get xposed running on the latest T-Mo build.
I have deodexed the latest T-Mobile 5.1 build, but I don't know how to make it flashable yet. I'm still learning. If anyone who knows how is willing to give me some guidance please PM me. I'm kinda stuck getting a working update-binary and updater-script.
I Truly Enjoy XDA-Developers. Com with this Fabulous HTC One M9
jbfountain said:
I have deodexed the latest T-Mobile 5.1 build, but I don't know how to make it flashable yet. I'm still learning. If anyone who knows how is willing to give me some guidance please PM me. I'm kinda stuck getting a working update-binary and updater-script.
I Truly Enjoy XDA-Developers. Com with this Fabulous HTC One M9
Click to expand...
Click to collapse
Someone help the man out! I don't have a clue either, lol
Sent from my HTC One M9 using Tapatalk
5.1 de-odexed Rom
I built a stock 5.1 De-odexed Rom, If anyone wants to try it out PM me
Hello,
I am wondering if the latest Xposed version is working fine on N6 5.1.1 Stock ROM. I have never tried Xposed on Lollipop since the official version doesn't support it.
Wondering if anyone using it can shine some light on the installation procedure. The Permissive thing is required or not?
Thanks
Yes it works. Flash the zip and install the apk. Nothing more to it than that. Just take a backup first. Permissive is not required.
danarama said:
Yes it works. Flash the zip and install the apk. Nothing more to it than that. Just take a backup first. Permissive is not required.
Click to expand...
Click to collapse
Where do you get the install .zip for it? The one in the Lollipop Xposed thread is SDK 21 and when I try to install on my 5.1.1 N6, it says I need SDK 22.
imnotmikal said:
Where do you get the install .zip for it? The one in the Lollipop Xposed thread is SDK 21 and when I try to install on my 5.1.1 N6, it says I need SDK 22.
Click to expand...
Click to collapse
Go to the xposed forum on xda
imnotmikal said:
Where do you get the install .zip for it? The one in the Lollipop Xposed thread is SDK 21 and when I try to install on my 5.1.1 N6, it says I need SDK 22.
Click to expand...
Click to collapse
Download the APK from here: http://forum.xda-developers.com/showthread.php?t=3034811
and
Flashable ZIP from here: http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
@danarama The modules are working great, but am experiencing a bit of a lag after installing Xposed. Is there anything I can do it fix it? Am running Stock ROM (5.1.1) and ElementalX kernel.
ReSkid said:
Download the APK from here: http://forum.xda-developers.com/showthread.php?t=3034811
and
Flashable ZIP from here: http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
@danarama The modules are working great, but am experiencing a bit of a lag after installing Xposed. Is there anything I can do it fix it? Am running Stock ROM (5.1.1) and ElementalX kernel.
Click to expand...
Click to collapse
I don't experience any lags so not sure.
danarama said:
I don't experience any lags so not sure.
Click to expand...
Click to collapse
I figured out the problem after restoring Nandroid and reinstalling Xposed, the lag happened when I installed Greenify and Amplify.
ReSkid said:
I figured out the problem after restoring Nandroid and reinstalling Xposed, the lag happened when I installed Greenify and Amplify.
Click to expand...
Click to collapse
Some modules don't play nice together. I can't speak about that particular combination, but it happens.
I've got both Greenify and Amplify installed (stock 5.1.1, unencrypted with Franco kernel). My N6 has never been snappier, no lag whatsoever. Was actually a little surprised at how smooth it feels after I flashed 5.1.1.
I have greenify and Amplify installed too.
Didgeridoohan said:
I've got both Greenify and Amplify installed (stock 5.1.1, unencrypted with Franco kernel). My N6 has never been snappier, no lag whatsoever. Was actually a little surprised at how smooth it feels after I flashed 5.1.1.
Click to expand...
Click to collapse
danarama said:
I have greenify and Amplify installed too.
Click to expand...
Click to collapse
Well then am not sure why mine was lagging. Now I unencrypted my phone by flashing Elemental X and formatting userdata. Then Xposed gave troubles of low system space, fixed it by wiping cache and dalvik.
Haven't installed Greenify or Amplify after but still the system isn't as snappier as it was when it was just stock rooted with custom kernel. Any tips or modules you guys can suggest to make it more snappier?
Thanks
ReSkid said:
Download the APK from here: http://forum.xda-developers.com/showthread.php?t=3034811
and
Flashable ZIP from here: http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
@danarama The modules are working great, but am experiencing a bit of a lag after installing Xposed. Is there anything I can do it fix it? Am running Stock ROM (5.1.1) and ElementalX kernel.
Click to expand...
Click to collapse
Hi! I am a total newb to flashing. From the link to download the zip, which version is the nexus 6? I believe it's just the arm and not arm64. So, as of today, it's xposed-v65-sdk22-arm-by-romracer-20150701.zip. Is that correct?
Thank you!
zkyevolved said:
Hi! I am a total newb to flashing. From the link to download the zip, which version is the nexus 6? I believe it's just the arm and not arm64. So, as of today, it's xposed-v65-sdk22-arm-by-romracer-20150701.zip. Is that correct?
Thank you!
Click to expand...
Click to collapse
Yes. You want arm. N6 is 32 bit. Arm 64 is for 64bit like N9.
prdog1 said:
Yes. You want arm. N6 is 32 bit. Arm 64 is for 64bit like N9.
Click to expand...
Click to collapse
Thank you, that's what I figured. But I didn't want to flash anything without asking first if that was the correct one...
zkyevolved said:
Thank you, that's what I figured. But I didn't want to flash anything without asking first if that was the correct one...
Click to expand...
Click to collapse
Yes, you were right. Flash the 32 bit ZIP. Keep the Uninstaller Zip handy incase anything goes wrong and also take a Nandroid before you do this.
ReSkid said:
Yes, you were right. Flash the 32 bit ZIP. Keep the Uninstaller Zip handy incase anything goes wrong and also take a Nandroid before you do this.
Click to expand...
Click to collapse
Yes, that's what I did first. Created a 6GB file which I then uploaded to my server just in case. Everything went fine, but now I'm having an issue
http://forum.xda-developers.com/nexus-6/help/xposed-amplify-t3148382
Any ideas?
Thank you again for your time ReSkid
zkyevolved said:
Yes, that's what I did first. Created a 6GB file which I then uploaded to my server just in case. Everything went fine, but now I'm having an issue
http://forum.xda-developers.com/nexus-6/help/xposed-amplify-t3148382
Any ideas?
Thank you again for your time ReSkid
Click to expand...
Click to collapse
As far as I know, you need to set your SELinux to Permissive for Amplify to work properly.
Download & Flash the attached ZIP file. Then reboot, open Xposed and reenable the Amplify module and do a Soft Reboot.
ReSkid said:
As far as I know, you need to set your SELinux to Permissive for Amplify to work properly.
Download & Flash the attached ZIP file. Then reboot, open Xposed and reenable the Amplify module and do a Soft Reboot.
Click to expand...
Click to collapse
You my friend rock! haha. Now, just a question, if I want to remove "permissive", how would I go about doing that (for future reference of course). Right now I want to play around with Amplify But it's good to know how to remove and undo these things.
zkyevolved said:
You my friend rock! haha. Now, just a question, if I want to remove "permissive", how would I go about doing that (for future reference of course). Right now I want to play around with Amplify But it's good to know how to remove and undo these things.
Click to expand...
Click to collapse
Glad to help
This would be an easy way, install the attached APK and use it. You can use it to toggle the Permissive/Enforcing option. Make sure you give it ROOT permission if it asks.
ReSkid said:
Glad to help
This would be an easy way, install the attached APK and use it. You can use it to toggle the Permissive/Enforcing option. Make sure you give it ROOT permission if it asks.
Click to expand...
Click to collapse
So normally nexus 6 is in enforcing mode? [emoji1]
Sent from my Nexus 6 using Tapatalk
I've been trying to install Viper on Marshmallow and keep getting installation errors since it is not enforcing. Can someone point me to the plaza where I can get accurate simple installation instructions for Android 6.0.1? Thanks so much.
tapPeD fROM my neXus 6
andrewjt19 said:
I've been trying to install Viper on Marshmallow and keep getting installation errors since it is not enforcing. Can someone point me to the plaza where I can get accurate simple installation instructions for Android 6.0.1? Thanks so much.
tapPeD fROM my neXus 6
Click to expand...
Click to collapse
i install it by flashing it in twrp recovery, never had a problem installing it. you can also unzip the app and place it unto /system/priv-app/ and then reboot.
simms22 said:
i install it by flashing it in twrp recovery, never had a problem installing it. you can also unzip the app and place it unto /system/priv-app/ and then reboot.
Click to expand...
Click to collapse
Where are you getting the zip from? I googled viper4android nexus 6 and found this website: http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
However, I followed the details exactly and it is not working. The driver status says abnormal.
tapPeD fROM my neXus 6
I copied it into /system/priv-app no go. Same thing
tapPeD fROM my neXus 6
odd. works fine here. works fine for everyone i know that uses it. thats where i got it from as well.
You will need something to switch it to either enforcing or permissive. Which ever one it calls for. Not all roms are set the same. Never found a use for it myself but there is a thread in the apps and themes section.
zelendel said:
You will need something to switch it to either enforcing or permissive. Which ever one it calls for. Not all roms are set the same. Never found a use for it myself but there is a thread in the apps and themes section.
Click to expand...
Click to collapse
After changing it over to permissive it worked. Question for you, does that effect the operation of the ROM in any way?
tapPeD fROM my neXus 6
andrewjt19 said:
After changing it over to permissive it worked. Question for you, does that effect the operation of the ROM in any way?
tapPeD fROM my neXus 6
Click to expand...
Click to collapse
Some say it makes it less secure but to be honest the rom I run has it set to permissive so that the built in theme engine works and I have never had an issue. Mind you I dont do alot with my device really. Just the normal. Calls, SMS and work stuff. The rest of the time is sits in my pocket.
zelendel said:
Some say it makes it less secure but to be honest the rom I run has it set to permissive so that the built in theme engine works and I have never had an issue. Mind you I dont do alot with my device really. Just the normal. Calls, SMS and work stuff. The rest of the time is sits in my pocket.
Click to expand...
Click to collapse
Is the theme engine the CM one on the Market? Or is it through xposed?
tapPeD fROM my neXus 6
andrewjt19 said:
Is the theme engine the CM one on the Market? Or is it through xposed?
tapPeD fROM my neXus 6
Click to expand...
Click to collapse
Neither. It has to be built into the rom.
Is there any to get this working without root enabled? The sound quality is awesome.
nookhdp said:
Is there any to get this working without root enabled? The sound quality is awesome.
Click to expand...
Click to collapse
No you need root to change the settings or running a custom kernel
Dear xdains,
My Lenovo P2 is running Android N stock rom (S251_ROW) and rooted systemlessly with Magisk.
I can run pretty much any root app on the phone except xposed module. I've tried all different versions of xposed. I have installed latest Xposed installer. Tired it via TWRP's zip flashing, tried it via in-app installation, tried version 88.1, 88.2 for SDK24 and even version 89. However, every time phone gets stuck on boot animation screen.(blue dots on white background).
My main intention of installing Xposed is to change the default (boring) system animation. (Transition effect).
I've even tried stratum but only can make few cosmetic changes but touching the transition animation bricks the phone.
I didn't get any solution apart from flashing an AOSP based ROM or Lineage ROM etc.
I don't want to go for any custom ROM because isn't the whole point of rooting is to gain full control over the phone and make the current system work as we wish?
So, any expert, please tell me why does the stock ROM doesn't support Xposed? I mean, technically what is preventing it? What files should be modified to support Xposed on stock ROM?
If anyone knows any way to make xposed module work on Lenovo P2's latest stock rom S251 or to change transition animation/effect on the same, please let the community know.
Thanks.
Yes it happens.
But after flashing xposed on stock, first boot takes time.
After waiting for some time, click home button(or fingerprint button) it will boot. It will boot definitely.
It is the bug you have to face if flashing xposed on stock rom
Hit thanks if you like it.....
shailuk301 said:
Yes it happens.
But after flashing xposed on stock, first boot takes time.
After waiting for some time, click home button(or fingerprint button) it will boot. It will boot definitely.
It is the bug you have to face if flashing xposed on stock rom
Hit thanks if you like it.....
Click to expand...
Click to collapse
If that's true, bro you have given me the best new i've heard today...:laugh::laugh::laugh:
It's true, happens to me Everytime I flash Xposed on stock.
shailuk301 said:
It's true, happens to me Everytime I flash Xposed on stock.
Click to expand...
Click to collapse
downloading stock.
installing xposed in t - 15 min..:fingers-crossed::fingers-crossed::fingers-crossed:
You sir, deserve a medal!
shailuk301 said:
Yes it happens.
But after flashing xposed on stock, first boot takes time.
After waiting for some time, click home button(or fingerprint button) it will boot. It will boot definitely.
It is the bug you have to face if flashing xposed on stock rom
Hit thanks if you like it.....
Click to expand...
Click to collapse
@shailuk301 :- You are simply awesome! :good:IT REALLY WORKED!:good: You've just restored my faith in humanity and xda! A Million thanks! Have a nice day Sir... :victory:
I wonder why hasn't anyone posted about this anywhere!! Or may be I couldn't find it.. Anyhow, thanks again!!
You sir, deserve a medal!
shailuk301 said:
Yes it happens.
But after flashing xposed on stock, first boot takes time.
After waiting for some time, click home button(or fingerprint button) it will boot. It will boot definitely.
It is the bug you have to face if flashing xposed on stock rom
Hit thanks if you like it.....
Click to expand...
Click to collapse
@shailuk301 :- You are simply awesome! :good:IT REALLY WORKED!:good: You've just restored my faith in humanity and xda! A Million thanks! Have a nice day Sir... :victory:
I wonder why hasn't anyone posted about this anywhere!! Or may be I couldn't find it.. Anyhow, thanks again!!
BTW, I am hitting the Thanks button as hard as I can but somehow it just isn't working. May be a bug in the website!
Great to know that it was helpful....
sghegde87 said:
@shailuk301 :- You are simply awesome! :good:IT REALLY WORKED!:good: You've just restored my faith in humanity and xda! A Million thanks! Have a nice day Sir... :victory:
I wonder why hasn't anyone posted about this anywhere!! Or may be I couldn't find it.. Anyhow, thanks again!!
BTW, I am hitting the Thanks button as hard as I can but somehow it just isn't working. May be a bug in the website!
Click to expand...
Click to collapse
Enjoy ?
Best Xposed modules working on Stock S251
Gravity Box
YouTube adaway
Wifi password
Xui mod
Greenify
Hi,
Could you please give link about your Xposed install method?
Which file should I flash on s251?