Database Develop

[Q] OTA update on stock ROM, but custom recovery

Good morning, all:
I just got my HTC One the other day and, in the process of transferring content from my Galaxy SIII, I rooted and installed CWM recovery, but kept the stock ROM because I liked the change from what I'd been using on the SIII (CM).
Unfortunately, in the last day or so, an OTA update was released for the One and, as I found out (and you likely know), you can't perform OTA updates with a custom recovery. The constant notifications are enough to make me want to update, besides the obvious benefits of increased stability.
I was wondering if I could flash the recovery found in the [Recovery] Stock HTC One post (http://forum.xda-developers.com/showthread.php?t=2158763) to the device so that I could update? Also, would this break my root/superuser? The device is a TELUS model (if they differentiate by carrier) with software no° 1.29.661.5.
Any advice would be appreciated. Thanks!
------------------------------
UPDATE - 2:38 PM
------------------------------
Hey, guys:
Sorry for all of this noise, I figured things out and wanted to delete this thread, but can't seem to do that.
For those of you experiencing similar issues, who followed mike1986.'s Complete Flashing Guide post, the process for restoring your stock Recovery image to do OTA updates is actually super simple:
- Connect your phone to your computer and pull the backup you did of your device before flashing the custom recovery image.
- Open the folder and move the Recovery.img file to your Android SDK folder.
-Boot your device in fastboot mode (like you did during unlocking bootloader - power off the device and turn it on using power + vol down buttons and select "FASTBOOT")
-Open up command prompt ( Start > Run > type cmd and hit enter ). The window that appears is called Command Prompt. <click here to see the image>
- Navigate to [your SDK directory] (type in Command Prompt: cd c:\[directory]).
- In the Command Prompt type following command: fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Using this method, you could flash your stock recovery back onto the device, perform the OTA, then flash the custom Recovery.img back onto your device all in the span of 5 minutes.
This is probably standard stuff for most people on this forum.

[DELETED]

Could you please post your custom recovery?
I need to do the same procedure as yours, and I am currently on same fw, from Telus.
Many thanks.
Sent from a pizza

millicent said:
Could you please post your custom recovery?
Click to expand...
Click to collapse
Sure thing, millicent.
Tried attaching it to the post, but that wasn't working so here's a DropBox link: HTC One Stock Recover (1.29.661.5). Happy OTA updating!

I've tried this, but the OTA update package won't install. Flashing the Recovery.img isn't enough.

Sonnyw said:
I've tried this, but the OTA update package won't install. Flashing the Recovery.img isn't enough.
Click to expand...
Click to collapse
I assume you're running a stock ROM, so did you delete any stock apps(i.e bloatware)? If so, you will need to NAND restore to a stock backup or get those apps back. First thing an official OTA does is check the signatures on all the files it'd expecting to be on the device and if any come back wrong or missing, update aborts.
Sent from my Galaxy S4

unremarked said:
I assume you're running a stock ROM, so did you delete any stock apps(i.e bloatware)? If so, you will need to NAND restore to a stock backup or get those apps back. First thing an official OTA does is check the signatures on all the files it'd expecting to be on the device and if any come back wrong or missing, update aborts.
Sent from my Galaxy S4
Click to expand...
Click to collapse
Remember that unlocking the bootloader automatically deletes a few apps, which you will need to install back

MacHackz said:
Remember that unlocking the bootloader automatically deletes a few apps, which you will need to install back
Click to expand...
Click to collapse
So I was just wondering, if i install the bloatware/default apps back manually (using the .apk files) and flash the recovery back to stock. Will I be able to do an OTA update Without loss of data? If that´s possible, I wil flash the custom bootloader back after performing the OTA update.

Guys, thanks for helping me out. I've done an OTA update without any data loss, you can read about it in thishttp://forum.xda-developers.com/showthread.php?p=42122514#post42122514 Thread.

MacHackz said:
Remember that unlocking the bootloader automatically deletes a few apps, which you will need to install back
Click to expand...
Click to collapse
Really? I did not know this! Out of my curiosity, do you know what apps get deleted?
Sent from my Galaxy S4

unremarked said:
Really? I did not know this! Out of my curiosity, do you know what apps get deleted?
Sent from my Galaxy S4
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

MacHackz said:
Click to expand...
Click to collapse
What a strange assortment of apps to be removed. Thanks for the info!

Can you tell me where to find the stock recovery I'm moto e
No one ever mentions where to find the stock recovery file for a noob like me
When I find it, Should I flash it via cmd and I'll get my stock recovery back?I want it back to install official lollipop 5.1 I downloaded.It won't install after downloading but just takes me to the TWRP Screen(ya I have TWRP installed)

HELP ME PLEASEEE said:
No one ever mentions where to find the stock recovery file for a noob like me
When I find it, Should I flash it via cmd and I'll get my stock recovery back?I want it back to install official lollipop 5.1 I downloaded.It won't install after downloading but just takes me to the TWRP Screen(ya I have TWRP installed)
Click to expand...
Click to collapse
This is the HTC One M7 forum, if you need help with your Moto E post in the Moto E forum.
http://forum.xda-developers.com/moto-e

CWM Flashable B609 for P7-L10 (Complete Update Package)

Here is The Complete Update Package of The B609 Extracted from The Update.app Provided by Huawei . I Extracted It and Removed Set.Immutable.list and Added HRT Kernel for Full Root Capabilities and Made CWM Flashable Package .
Let us Begin with Preparing Your Phone .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1) First of All Download This Specific CWM Recovery for EMUI 3.0 From Here
2)Connect Your Phone To Your PC with ADB Enabled . Then Apply The Following Commands from The Terminal or CMD
adb reboot recovery
Click to expand...
Click to collapse
then cd to the directory where the cwm recovery is .... if you are a windows user then i should be something like this
Code:
cd Downloads
then type
fastboot flash recovery recovery_cwm_emui3.0.img
Click to expand...
Click to collapse
then Type
fastboot reboot
Click to expand...
Click to collapse
.
3) Now Download The CWM Package From Here
And If You Want Root Then Download This Package From Here
And Now
The Flashing ​Copy The Rom and Other Necessary Files onto External SD Card . and Reboot into Recovery
On The First Boot Into Recovery it will ask whether You Need English Language Or Chinese . Choose on Your Own Consideration :silly:
Then Wipe Data/Factory Reset or Go to Mounts And Storage and wipe What you Think Should Be Wiped .
Then Install Zip from External SD Card and If You need Root then flash the SuperSU Package Provided and Reboot and Also Choose Fix Root .
Now Just Setup Your Device .
One Word of Advice :
Some Users Reported That If The Update is Done with The Removal of Sim card Then The Motion Control Is Shown .
Please Try and Report Back .
And Now
The Credits ​1) For Kernel/Recovery/Updater-Script of Se7en-Rom V1.x Goes To @natorus87
2) For The B609 Complete Update Package to HuaweiBlog.de
3) For Making The Update Package ME .
If I Forgot To Mention anyone Then Do Let me Know .:silly:

thanks for the package.
The only reservation i have is the HRT Kernel:
are there any details known about this kernel? it's older than 609 i guess; what fw is it based on?

bertolehm said:
thanks for the package.
The only reservation i have is the HRT Kernel:
are there any details known about this kernel? it's older than 609 i guess; what fw is it based on?
Click to expand...
Click to collapse
It is From B608 Provided in the Thread By @natorus87
Also I Created a Slimmed Out Package of B609 of Only 655MB Size .... Will Test it and Provide Soon

Is this ROM flashable over any version ROM?

andromodgod said:
It is From B608 Provided in the Thread By @natorus87
Also I Created a Slimmed Out Package of B609 of Only 655MB Size .... Will Test it and Provide Soon
Click to expand...
Click to collapse
Hi Andromodgod
thanks for your work. Would be possible to have a CWM flashable zip with the stock kernel? I would prefere to have a full stock routed version.
Thanks again for your support.

jkmaxfli said:
Is this ROM flashable over any version ROM?
Click to expand...
Click to collapse
I Dont Know ..... U Should Be On Any Version of EMui 3.0 ..... I Haven't Tried it From Emui 2.3 ..... If You Want TO Try from 2.3 Then Remove Set.immutable List from ur Phone Before Flashing

andromodgod
Links are not working... (

You are wrong
Mik Komarov said:
andromodgod
Links are not working... (
Click to expand...
Click to collapse
Links are working. I just tested all of them and are working well with mega server. :good:

Can I flash it from internal memory? My SD card just broke down...

How can I...
How can I know If set. immutable.list is gone or my device is fully rooted???? Since I use rootexplorer to find the file and still appears in /sbin/ folder. I follow all your instructions and files to flash B609 fully rooted

the file in /sbin doesn't have a .list extension - i think you can ignore it;
you can test for 100% by uninstalling some preinstalled g-app like G+, if it's back after a restart you're only 99%;

Code don't work
When I type the code it says adb command not found!! help please

aissasell said:
When I type the code it says adb command not found!! help please
Click to expand...
Click to collapse
try adb reboot bootloader

nfc
Does Ngoc works for u guys? I mean if it really works not just the menu

chma said:
try adb reboot bootloader
Click to expand...
Click to collapse
thanks for responding, that problem is fixed, but i have an another problem when i type fastboot flash recovery cwm.img it says waitnig for device and it stay like that for many time and nothing happened.
and when i type adb reboot bootloader it reboot with a screen saying "phone unlocked".
I was in the rom b133 but i did an upgrade to b609 so i lost the root and it wont be rooted.
Thank you!

aissasell said:
thanks for responding, that problem is fixed, but i have an another problem when i type fastboot flash recovery cwm.img it says waitnig for device and it stay like that for many time and nothing happened.
and when i type adb reboot bootloader it reboot with a screen saying "phone unlocked".
I was in the rom b133 but i did an upgrade to b609 so i lost the root and it wont be rooted.
Thank you!
Click to expand...
Click to collapse
Type adb reboot bootloader, when you see "phone unlocked" on the screen you phone is ready for flashing with fastboot.
Do not touch the phone, just type fastboot flash recovery cwm.img

samoborac said:
Type adb reboot bootloader, when you see "phone unlocked" on the screen you phone is ready for flashing with fastboot.
Do not touch the phone, just type fastboot flash recovery cwm.img
Click to expand...
Click to collapse
I tried this. But when i write this command it doesnt answer. He said something is false.

samoborac said:
Type adb reboot bootloader, when you see "phone unlocked" on the screen you phone is ready for flashing with fastboot.
Do not touch the phone, just type fastboot flash recovery cwm.img
Click to expand...
Click to collapse
It worked, thank you soo mush. The rom is update also the root! Im gratful! :victory:

I have a problem me too ...
After B126 - root, B133 - root, I can't root B609. I can't install ADB & fastboot ("adb_fastboot_and_other_tools.zip" or "adb-setup-1.4.2.exe") into my PC. I read it all the instructions, tutorials, but without succes. If I try to root it without ADB, after I start Root Genius - loading Root Genius - restarting the phone at 38% and 64% - stop rooting (sad emoticon of Root Genius).
Is not the first time when I'm rooting the phone; I tried to downgrade it to B133, I put it the "dload" folder on the sd card, again without succes. I'll try to put B602 and downgrade after that at B133 ... I you have some advice, please tell me how to solve that ...

Shymmy said:
I have a problem me too ...
After B126 - root, B133 - root, I can't root B609. I can't install ADB & fastboot
Click to expand...
Click to collapse
You definitely can get adb to run, there's really no other option if you want to make progress with root.
Did you install Huwaei HiSuite for the drivers; authorize pc connection; install hisuite helper app on phone?

Software update via OTA arrived Unable to install because ROOT

I have already asked this question on Italian forum but no one knows me answer
Yesterday on my mate's huawui arrived update via ota CRR-L09C432B177, but my terminal for business problems and for an app I need and it only works with root, it fails to make the upgrade to the new version .
I also moddata TWRP Recovery 2.8.7.0-carrera
Is there a way to do this update?
I read that the problem is the recovery, serving recovery stocks and not the TWRP
I found on the XDA forum CRR recovery stock-l09 .... B145 from having to put in place the TWRP.
I confirm that this is correct and so I can do the OTA update?
otherwise I can put the new firmware in dload folder and perform an upgrade?
That will clear me all my data, and take me back to not having the root, right?

you need to flash the recovery of your current firmware, not the b145 one..
unroot is also recommended before flashing recovery..
in your case i would flash also the stock boot.img aswell (of the current running firmware)..
you do this on your own risk!!!
Gesendet von meinem HUAWEI CRR-L09 mit Tapatalk

@cacash
You said you need root? With B177 you can't open twrp recovery. A few guys in german forums bricked their phone with flashing twrp and trying to open it.
I tried it today to, but my mate s ended up in bootloop.
After flashing the B177 stock recovery the phone started normally.
I don't know if there's an other way to root the mate s with B177, but with twrp recovery and installing supersu zip it fails.

The EMUI Update Installer is part of the Huawei Recovery. If you replace your stock recovery it with TWRP, your phone "forgets" how to install updates.
That means you have to flash stock recovery or you can´t use any Update.APP file.
Because of the lack of support for the Mate S, the current TWRP Recovery doesn´t work with every Build. So now you habe the choose between B177 and TWRP but not both.

Let's see if I understand:
1 I should flash the stock recovery by removing the TWRP
2 do unroot
3 flash the firmware again CRR-L09C432B145
Now I should get back everything as original and I could then receive the OTA update.
All this is right?

Switch 1 and 2 and forget 3.
First you need to unroot your phone over supersu, then you should flash the stock recovery.
You don't need to flash the B145 again.
After unroot and flashing stock recovery, the B177 ota update should work.
But with B177 you cannot root your phone! If you need root, you must stay on B145, flash the B321 marshmallow update manually or wait for a new ota update which can be rooted.

Thanks for answers, now having done a long time ago I do not remember how to root to make unroot.
I do unroot directly from supersu? ("Settings" and choose the "Complete unroot option") or can I use the program can be downloaded from playstore "Simply Unroot"?
Then if all this is possible, how do I install the stock recovery?
What program do I need?
I forgot, first install the stock recovery and after I unroot, right?

Yeah you can unroot your phone with the "complete unroot option" in supersu.
For installing stock recovery you need to extract the recovery from your current firmware with the Huawei Extractor (you'll find it at xda) and then flash the recovery via fastboot with:
fastboot flash recovery recovery.img
First do the unroot and after unrooting, flash stock recovery via fastboot.

Znaaps said:
Yeah you can unroot your phone with the "complete unroot option" in supersu.
For installing stock recovery you need to extract the recovery from your current firmware with the Huawei Extractor (you'll find it at xda) and then flash the recovery via fastboot with:
fastboot flash recovery recovery.img
First do the unroot and after unrooting, flash stock recovery via fastboot.
Click to expand...
Click to collapse
Then I downloaded from the site HuaweiUpdateExtractor_0.9.9.3
Now I always downloaded from xda forum "HUAWEI_Mate S_firmware_CRR-L09_Android 5.1.1_EMUI 3.1_05013FSY_C432B145CUSTC432D003_Sweden" which is the only one who found it.
since then I UPDATE.APP extracted file.
I started HuaweiUpdateExtractor, but could not find Huawei's mate and I set Huawei mate (1)
then what file I have to pull out of the present?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
question?
I could use the "Create flashable Zip" option
then flash the zip recovery of the stock with TWRP

you don´t have to chose anything in the Exctractor. just drag and drop the update.app into the blank space.
and no, you can´t use the "Create flashable Zip". won´t work. don´t try it. just do what we told you.
open Huawei extractor
drag and drop update.app
right click on recovery.img and extract
flash via fastboot AFTER UNROOT VIA SUPERSU

Meanwhile, a thank you I did everything as you said, and the update has been successful.
But to my amazement the restart I checked the version ...........
I found myself with CRR-L09C432B177 version software
Android version 5.1
Version 3.1 EMUI
But it was not an upgrade to macmellow
Where is the macmellow for Mate S?

Not released. There is just the beta you have to flash manualy.

for extract Mate S FW with Huawei Firmware Extractor use Huawei Mate 7, that works nice.

Huawei P8 Lite Android 6.0 Marshmallow B564 Root

Huawei P8 Lite Android 6.0 Marshmallow B564 Root
I want to create a topic about how to root new version of Android 6.0 B564 P8 Lite phone. :cyclops:
Write here any suggestion please:

damian12866 said:
Huawei P8 Lite Android 6.0 Marshmallow B564 Root
I want to create a topic about how to root new version of Android 6.0 B564 P8 Lite phone. :cyclops:
Write here any suggestion please:
Click to expand...
Click to collapse
A moment i'm try and say you.
What TWPR versión have you instaled?
The 3.0.2 it's for MM android and the 2.7.8 it's for android Lollipoo

damian12866 said:
Huawei P8 Lite Android 6.0 Marshmallow B564 Root
I want to create a topic about how to root new version of Android 6.0 B564 P8 Lite phone. :cyclops:
Write here any suggestion please:
Click to expand...
Click to collapse
:good::good::good::good:
Files:
1. BETA-SuperSU-v2.62: https://mega.nz/#!nJ9FXAjD!Jgelz-zLH...cNaPT-GD2ICsxA
2. BETA-SuperSU-v2.66: https://mega.nz/#!uNsxwIbB!AXQzZL67N...jATIYyvrYshTsQ
3. UPDATE-unSU: https://mega.nz/#!3ZMCBDpJ!Lj9Fc1YMI...46ZNE-esov2Rbg
Thanks John Miller for the files upload.
Process follow by me
1.- The C432B564 in the phone
2.- I flash the TWRP 3.0.2 ADB flasboot mode
2.- In the TWPR i install the SuperSu-v2.62
3.- I turn off the phone
4.- I turn on my phone in TWPR and i install SuperSu-v2.66
5.- I reboot the phone and here it is
Regards
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

lokopepe said:
:good::good::good::good:
Files:
1. BETA-SuperSU-v2.62: https://mega.nz/#!nJ9FXAjD!Jgelz-zLH...cNaPT-GD2ICsxA
2. BETA-SuperSU-v2.66: https://mega.nz/#!uNsxwIbB!AXQzZL67N...jATIYyvrYshTsQ
3. UPDATE-unSU: https://mega.nz/#!3ZMCBDpJ!Lj9Fc1YMI...46ZNE-esov2Rbg
Thanks John Miller for the files upload.
Process follow by me
1.- The C432B564 in the phone
2.- I flash the TWRP 3.0.2 ADB flasboot mode
2.- In the TWPR i install the SuperSu-v2.62
3.- I turn off the phone
4.- I turn on my phone in TWPR and i install SuperSu-v2.66
5.- I reboot the phone and here it is
Regards
View attachment 3767872 View attachment 3767873
View attachment 3767874
Click to expand...
Click to collapse
Thank you a lot dude! )))

lokopepe said:
:good::good::good::good:
Files:
1. BETA-SuperSU-v2.62: https://mega.nz/#!nJ9FXAjD!Jgelz-zLH...cNaPT-GD2ICsxA
2. BETA-SuperSU-v2.66: https://mega.nz/#!uNsxwIbB!AXQzZL67N...jATIYyvrYshTsQ
3. UPDATE-unSU: https://mega.nz/#!3ZMCBDpJ!Lj9Fc1YMI...46ZNE-esov2Rbg
Thanks John Miller for the files upload.
Process follow by me
1.- The C432B564 in the phone
2.- I flash the TWRP 3.0.2 ADB flasboot mode
2.- In the TWPR i install the SuperSu-v2.62
3.- I turn off the phone
4.- I turn on my phone in TWPR and i install SuperSu-v2.66
5.- I reboot the phone and here it is
Regards
View attachment 3767872 View attachment 3767873
View attachment 3767874
Click to expand...
Click to collapse
What is a purpose of that last file? Unroot?
And Thank you!

Bazilli said:
What is a purpose of that last file? Unroot?
And Thank you!
Click to expand...
Click to collapse
I think it's SuperSu Uninstaller

damian12866 said:
I think it's SuperSu Uninstaller
Click to expand...
Click to collapse
Yes

I did same as lokopepe but instead of outdated BETA-SuperSU-v2.66, i used newer v2.74-2-BETA-System-mode.zip from here http://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
I can confirm that it works also. Most important is to remember flash BETA-SuperSU-v2.62 first.

On twrp.me I find only the huawei P8, does it work for the p8 lite or I have to find a kirin variant? and what's the difference with a kirin ?

axel59123 said:
On twrp.me I find only the huawei P8, does it work for the p8 lite or I have to find a kirin variant? and what's the difference with a kirin ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/p8lite/general/twrp-3-0-0-0-p8-lite-kirin-t3343320
Here you have TWRP for our device.

where can I download TWRP 3.0.2 for P8 Lite?

ReneGee said:
where can I download TWRP 3.0.2 for P8 Lite?
Click to expand...
Click to collapse
https://mega.nz/#!2JYV1KjI!i4O0wIBHNrpCIA1v56Ot_sCBGB7tKkRyGyP-fCMabe0
There you go the 3.0.2 by peleato
Sent from my ALE-L21 using XDA-Developers mobile app

when i type adb reboot bootloader it shows phone offline any solution plz ?

TornadoMiMo said:
when i type adb reboot bootloader it shows phone offline any solution plz ?
Click to expand...
Click to collapse
Have you enabled usb debug in developer settings?

Thanks a ton, lokopepe and Bazilli. I can confirm following their instructions works flawlessly on B564. I have TWRP 3.0.2 and SuperSU 2.74 now, all working. You might get a bootloop after installing SuperSU v2.62, but don't worry about it and just install the next one. Should be fine then.
So, noob question time. Once a new system update appears, what would be the safest way to get it? I assume unroot and go back to stock recovery before receiving it?
Can I do full unroot from within SuperSU, or should I use the provided file? Also, how do I revert to stock recovery? I imagine it's a matter of extracting recovery.img from the full stock B564 ROM and flashing that onto the phone?

wdua said:
Thanks a ton, lokopepe and Bazilli. I can confirm following their instructions works flawlessly on B564. I have TWRP 3.0.2 and SuperSU 2.74 now, all working. You might get a bootloop after installing SuperSU v2.62, but don't worry about it and just install the next one. Should be fine then.
So, noob question time. Once a new system update appears, what would be the safest way to get it? I assume unroot and go back to stock recovery before receiving it?
Can I do full unroot from within SuperSU, or should I use the provided file? Also, how do I revert to stock recovery? I imagine it's a matter of extracting recovery.img from the full stock B564 ROM and flashing that onto the phone?
Click to expand...
Click to collapse
If the update is a full update package (about 1.4Gb) you don't need to go back to stock recovery to install it. You don't even need to un-root.
As it replaces all partitions with its own images in the full update, it doesn't matter. You only have to re-flash twrp and root afterwards.

Bazilli said:
I did same as lokopepe but instead of outdated BETA-SuperSU-v2.66, i used newer v2.74-2-BETA-System-mode.zip from here http://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
I can confirm that it works also. Most important is to remember flash BETA-SuperSU-v2.62 first.
Click to expand...
Click to collapse
its works bro..
thanxs in advance

Hi everyone,
Just to inform newbies like me, the combo to get into TWRP is :
- Volume (+)
- Volume (-)
- Power
all together at boot.
I'm on C4332B564 but cannot boot into TWRP after install.. how can I do ?
- I just unlocked the bootloader
- I flash twrp.img (3.0.2) via ADB : fastboot flash recovery twrp.img
- The phone stays in the white screen with "Phone unlocked"
- I reboot but the phone goes only in the EMUI eRecovery, not TWRP.
thanks a lot !
Click to expand...
Click to collapse

magicyoda said:
Hi everyone,
Just to inform newbies like me, the combo to get into TWRP is :
- Volume (+)
- Volume (-)
- Power
all together at boot.
Click to expand...
Click to collapse
I think you need to rename twrp.img to recovery.img, and than "fastboot flash recovery recovery.img"
After that you go into recovery by pressing volume up + power.

Hello,
Do we need to move eu.chainfire.supersu-1 folder from "/data/app" to "/system/app" to keep root?

Stock recovery for Honor 9 Lite?

Hey there,
I recently purchased a brand new honor 9 lite.
It came stock with firmware LLD-L31 8.0.0.128(C432).
I unlocked bootloader. (Got code with DC Unlocker) FRP was already unlocked.
I then installed TWRP and rooted with Magisk.
So my device has full root access. However I want to update to the new firmware.
Current on my device LLD-L31 8.0.0.128(C432)-->LLD-L31 8.0.0.132(C432)
(Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
)
I have tried the dload>UPDATE.APP method. The install gets to 5% and then says "Software install failed!"
So really I am just looking for a way to install these updates. If it means removing TWRP and root etc. thats fine. I know how to backup everything i.e. Titanium Backup.
I am only asking here because I think I have tried all the methods that I can and I don't want to miss out on the GPU Turbo update next month. Maybe installing stock recovery would work but I can't find it and in Huawei update extractor there is not a "recovery.img" only "ramdisk_recovery.img".
Any help is greatly appreciated
Also feel free to ask me to clarify anything for you.
(This is my first ever post on XDA so let me know if i did anything wrong)

Right as you have TWRP installed on your phone then its easy enough.
Simply go to this forum thread:
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Download HuRUpdater and follow the instructions.
Firmware files your going to need are
update.zip: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2052/g1647/v144104/f1/full/update.zip
update_full_LLD-L31A_hw_eu.zip: http://update.hicloud.com:8180/TDS/...LLD-L31A_hw_eu/update_full_LLD-L31A_hw_eu.zip
update_data_full_public.zip: http://update.hicloud.com:8180/TDS/...LLD-L31A_hw_eu/update_full_LLD-L31A_hw_eu.zip
Click to expand...
Click to collapse
Once you have downloaded the files make a new folder on your SDCard best way is to name it to firmware so in your case it would be
LLD-L31C432B132 .
Then rename the files you downloaded like this: (-> Rename to)
update.zip -> update.zip
update_full_LLD-L31A_hw_eu.zip -> update_all_hw.zip
update_data_full_public.zip -> update_data_public.zip
now place the 4 zips HuRUpdater zip, update.zip ,update_all_hw.zip , update_data_public.zip into that LLD-L31C432B132 then reboot into twrp and install the HuRUpdater zip and follow the on screen instructions.
That should get you back to complete stock. Just remember to Factory Reset after using HuRUpdater to flash the firmware.
As for just reinstalling the stock recovery to so you could use OTA it wouldn't work like that as there would be changes to the firmware that would stop OTA updates, its best to go back full stock.
Normally i would get a new phone unlock its bootloader and root away, but since getting the Honor 9 Lite LLD-L31C432 i haven't done that i have my unlock code ready but i haven't used it.

hacktrix2006 said:
Right as you have TWRP installed on your phone then its easy enough.
Simply go to this forum thread:
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Download HuRUpdater and follow the instructions.
Firmware files your going to need are
Once you have downloaded the files make a new folder on your SDCard best way is to name it to firmware so in your case it would be
LLD-L31C432B132 .
Then rename the files you downloaded like this: (-> Rename to)
update.zip -> update.zip
update_full_LLD-L31A_hw_eu.zip -> update_all_hw.zip
update_data_full_public.zip -> update_data_public.zip
now place the 4 zips HuRUpdater zip, update.zip ,update_all_hw.zip , update_data_public.zip into that LLD-L31C432B132 then reboot into twrp and install the HuRUpdater zip and follow the on screen instructions.
That should get you back to complete stock. Just remember to Factory Reset after using HuRUpdater to flash the firmware.
As for just reinstalling the stock recovery to so you could use OTA it wouldn't work like that as there would be changes to the firmware that would stop OTA updates, its best to go back full stock.
Normally i would get a new phone unlock its bootloader and root away, but since getting the Honor 9 Lite LLD-L31C432 i haven't done that i have my unlock code ready but i haven't used it.
Click to expand...
Click to collapse
Thanks so much. This worked, I can use this when the GPU Turbo firmware gets released aswell right?

It should work i see no reason why not however your going to need the new links for B135 when it releases. It also means you need to have trwp installed etc and redo the steps. other then that it should work fine.

Dear friends,
the quoted 3. part of download "update_data_full_public.zip" is the same as the 2. part. Where I can download the right update_data_full_public.zip for Honor 9 lite?
br
Joy

joy.d said:
Dear friends,
the quoted 3. part of download "update_data_full_public.zip" is the same as the 2. part. Where I can download the right update_data_full_public.zip for Honor 9 lite?
br
Joy
Click to expand...
Click to collapse
Download the app Firmware Finder and use that to download your roms.