Hi all.
I download torrent all the time. Especially games
The problem is, most game are + 10gb
And my ext.SD is fat32 same as everyone
And fat32 don't have the ability to handle more than 4gb per file
I want a way to chang it and able to read it..
Plz step by step, iam very noob in this think
If anyone could make a software or guide how to do it it will be very nice
Thanks in advance and have a greet day
Sorry for my bad English
You're better off formatting to exFAT, which is specifically designed for flash NAND memory and USB "Keys".
It removes the silly encryption that NTFS provides, giving a performance boost for things like writing to the card itself.
You can do this easily in Windows. Insert the Micro SD card into a reader that the computer can read. You can buy USB - Micro SD readers for around $10 off of EBay. Then, right click, format, and select exFAT from the drop down list.
THIS WILL ERASE ALL CONTENTS OF THE MICRO SD CARD
THIS WILL ERASE ALL CONTENTS OF THE MICRO SD CARD
THIS WILL ERASE ALL CONTENTS OF THE MICRO SD CARD
THIS WILL ERASE ALL CONTENTS OF THE MICRO SD CARD
THIS WILL ERASE ALL CONTENTS OF THE MICRO SD CARD
Once that's done, re-insert it into your device, and all is well.
Thanks alot. You made my day ^…^
Thumb up ?
Related
Help,
After i flashed my KAISER i have a problem. The sd card is not recognised anymore. Is there a solution for this problem?
I hope so, otherwise i have a brick
Storage card problem
I always used a 4 gig card, just tried an 512 mb card, and that one was recognised. Strange isn't it?
First, which method did you use to flash your new ROM?
If you used the USB method to flash your new ROM, did you remove your SD card during the flash process?
If you used the SD card method to flash your new ROM, did you do a hard reset with your SD card inserted?
Second, do you have an SD card reader for your computer? I would probably try to verify that the file system and data are intact on your SD card. If you have an SD card reader, you can also use it to reformat your card.
If none of this is helpful, provide some more information to fill in the gap between your microSD card working properly and not showing up on your phone.
Re
I flashed to TPCV5.1 full today. No sd in my phone.
My cars reader in the computer doesn't recognise the sd card either.
Strange thing is , when i use an other 4 gig sd card, the phone still doesn't recognise it, my card reader on my computer does, so why not on my phone.
I had a 2 gig sd card, and put all the data again on it, and it's working.
Stilli have a problem that my phone won't recognise a 4 gig sd card.
So far my story.
Does seem odd. What file system is your 4GB card formatted with? If it shows up as "RAW" or anything, I would definately format it to FAT32.
Edit: I was referring to your "other" 4GB card. I don't think I have any advice for the original one.
A while back ago I purchased a Disc with all kinds of recovery and maintenance programs for all versions of Winders from a company called "Spotmau". One of the uitlities in BootCare is a great partitioning program called Partition Genius, that enables you to move, shrink, add/subtract partitions without having to wipe entire drive. Specifically, I am able to modify an SD Micro card without having to flip the non-removable bit.
My question is, should I just leave the new ext3 or ext4 partition as such or should I go ahead and format it in Linux? The program has the ability for this.
This is a bootup CD so you'll work in a non-winders environment but it does the trick really good.
G1, on AT&T
CyanogenMod 4.2.13
16GB Sandisk SDHC.
Just use the recovery image in my sig, no need to have a card reader or anything extra on the computer.
Filp the non-removable bit?
Non-Removable bit
I was taught that a PC will not partition an SD card or a USB flash drive because it is addressed as a removable drive. By flipping this "Non-Removable Bit", the PC, and any partitioning program will now recognize the USB or SD card as a permanent or fixed drive. I tried a program that was published by Lexmark but I didn't get any results. I did, however, accomplished to partition any USB or SD card with Partition Genius which is a bootable program.
Diode
Oh yeah, thanx for your recovery image, highly appreciate it.
L8Tr 4 Now.
Hi all. I just got a new X1 a few days ago. Pretty happy to have it, however, I'm having chronic problems flashing a rom on it using the micro SD method. I have a PNY Micro SD card, and after hard spl-ling my phone, I put a rom on the micro SD card in the root, renamed it to KOVSIMG.nbh, powered the phone off. Removed the battery and micro SD, reinserted everything, and when I powered it back up, I got the tri-colored screen, then it said no image file. For some reason, this PNY card isn't being recognized by my computer, so I can't reformat it with my computer. Can somebody please either tell me how to format the card on my X1 or direct me to the most current and reliable USB method thread please. Thanks.
[A] Micro SD Flashing method won't work
Hi x1-pc7,
try this:
http://forum.xda-developers.com/showthread.php?t=787867
In Summary,
try to copy all your microsd contents somewhere else temporarily. e.g. your pc desk top
FORMAT you SD card as FAT or FAT32.
try the micro SD method.
sorry, i mis-read your post, you knew all that above...
To format your sd micro card, you would need a card reader to format your sd card.
card reader that handles the microsd, or put the micro sd into a sd card adapter, usually provided with the microsd card, and put this into a sd card reader.
Hope this helps!!
Have a Happy New Year!!
chinkyeyed09 said:
Hi x1-pc7,
try this:
http://forum.xda-developers.com/showthread.php?t=787867
In Summary,
try to copy all your microsd contents somewhere else temporarily. e.g. your pc desk top
FORMAT you SD card as FAT or FAT32.
try the micro SD method.
sorry, i mis-read your post, you knew all that above...
To format your sd micro card, you would need a card reader to format your sd card.
card reader that handles the microsd, or put the micro sd into a sd card adapter, usually provided with the microsd card, and put this into a sd card reader.
Hope this helps!!
Have a Happy New Year!!
Click to expand...
Click to collapse
Listen. I said that my micro SD does not get recognized by my computer. I have an adapter, but my computer won't recognize it. Read the whole post, and please show me where it talks about how to use the USB method to flash because the micro SD method will absolutely not work for me.
Thanks.
Happy New Year to you too.
usb method is simple
just turn device off.push the volume bottom in(& keep it in) then push power & keep both in until bootloader screen appears.then connect to usb.run Xperia Software Upgrade...Done!
x1-pc7 said:
Listen. I said that my micro SD does not get recognized by my computer. I have an adapter, but my computer won't recognize it. Read the whole post, and please show me where it talks about how to use the USB method to flash because the micro SD method will absolutely not work for me.
Click to expand...
Click to collapse
You could try to change your USB to PC setting to "Disk Drive" (Start » Settings » Connections). This way your phone will only show your microSD card instead of both internal memory and SD contents.
See if that enables you to format your SD card.
x1-pc7 said:
For some reason, this PNY card isn't being recognized by my computer, so I can't reformat it with my computer.
Click to expand...
Click to collapse
Not even without the X1, i.e. when using only your adapter?
Sounds like either the card or the adapter is broken - any chance to cross-check with another card/another PC?
Make sure your adapter can handle the card: (µ)SDHC cannot be read by older (µ)SD adapters....
Need some help pls. I formatted my SD card, inserted in the phone, came into boot loader mode, but no onscreen instuctions. Am I suppsed to run the upgrade sofeware becos the error from there is my phone is corrupted.
julyjat said:
Need some help pls. I formatted my SD card, inserted in the phone, came into boot loader mode, but no onscreen instuctions. Am I suppsed to run the upgrade sofeware becos the error from there is my phone is corrupted.
Click to expand...
Click to collapse
Are you trying to flash your phone? If you do, have you copy the new ROM to the SD card? (in root, not in any folder) And rename the ROM to "KOVSimg.nbh"
Then the boot loader mode will detect the ROM and show instructions.
However, if you're not trying to flash your phone, you don't need to enter the boot loader mode. Just do battery pull, and start your phone normally.
not dev related, therefore moved to q&a
Hi guys,
I tried partitioning my external sd card to linux swap, and something must have gone wrong. Now,a notification on my Galaxy S reads "Damaged SD card - SD card damaged. You may have to reformat it." This was the first thing I tried, but the Internal SD is formatted instead when I try. (Rom bug?). When i mount my phone via USB, only the formatted (damnit) internal SD is found.
I'm currently on TiramiSlim (best rom!!) with Devil 0.94. If you have any help it would be appreciated, any further questions don't hesitate!
yahoo907
In first i think that partition ext sd card is useless but it's my opinion.
In fact if you want to recover your ext sd i advise you to reformat your sd card with the windows disk utility: you select all volumes, delete them and recreate a new one with ntfs format (android will do his work when you'll insert your sd in the device).
If it doesn't work try to make the same but with a Linux system (Linux is powerful ^^).
Please reply me your results.
Have you tried to format the SD card with an SD Adapter & then make sure that USB debug is enabled on the device.
I had this issue.
Sometimes it shows that the card is damaged & then it reads it later on!
I plugged the Card into my Digi-Cam Formatted it.
Changed the Rom.
Now it works.
Anyways safely remove the drive when plugged into a computer!
i don't have an sd-card adapter unfortunately, the only way i can plug it in is via my phone. I cannot seem to find a disk utility on windows that will read the external sd, i can only find the internal from my computer.
i will try and get hold of an sd-adapter and let you know if it works
fixed the problem!
yahoo907 said:
fixed the problem!
Click to expand...
Click to collapse
how did you fix the problem?
My phone recognizes the internal storage but i keep getting "sd card is damaged, try reformatting it" in the notification bar.
when I click on format, it says "unmounting sd card" but nothing happens.
Thanks,
Luke
*edit.. nvm.
I put my SD card in my old x10 and in settings/storage I erased my SD card.
Works fine now
Hi,
I just tried to read an exFAT formatted microSD card via OTG (with a SD card converter and then a USB card reader) but fail.
When I did some search, I heard from other people that Note 8 can read exFAT format, but mostly they are referring to if I put the microSD card to one of the sim card slot.
However for my case, I don't want to put it there, since the microSD card that I want to access is from my Mavic Air, which I want to copy those 4K video and RAW photos to my phone directly. It is too troublesome if I need to remove the sim card slot, put it in, copy and then pull it out again...
So is there really no way that Note 8 can read exFAT microSD card via the OTG way?
Many thanks for any help that can be offered.:laugh: