Database Develop

Reverting back from EMUI 3.0 to 2.3

Stuffs needed:
1. P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B604.zip - http://www.filespr.com/NDMwMTY4Ng/P7-L05-L07-EMUI3-0-Android4-4-V100R001C01B604-zip-speedyshare.html
2. dload_3.0_down_2.3.zip - https://yadi.sk/d/WtJNRpZjcNpto
3. P7-L07-L05_EMUI2.3_Android 4.4_V100R001C01B125SP03.zip - https://mega.co.nz/#!4IFCwaga!mRiDJ4GPlXbnhqFlUzk4FnBzgEsG6-02AThx2zExWdg
4. P7-L10_V100R001C00B135SP03_BACK_TO_L10.zip - https://yadi.sk/d/lcopBbXycNq4Q
5. Huawei_Ascend_P7-L10_V100R001C00B135_Israel_Android_4.4.2_EMUI_2.3.zip or B138
(Just ask uncle google about these stuffs)
From EMUI_3.0_for_P7-L10
1. Force update using EMUI 3.0 stock recovery the P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B604 or P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B606 on your P7 L07-L10 B604. (Just wait until it finish with error. Just ignore and let your phone boot). Note: If you are using CWM, flash EMUI 3.0 Stock recovery first using fastboot, if not just ignore and continue this step).
2. Next force update with dload_3.0_down_2.3. (Also, wait until it finish with error. Ignore and boot your phone again).
3. Next force update with P7-L07-L05_EMUI2.3_Android 4.4_V100R001C01B125SP03. (It will update using 2.3 stock recovery, just after a few second it will boot again into emui 3.0 recovery (sometimes it will hang from 2.3 stock recovery, just power off your phone and power it on again and it will boot into stock recovery 3.0 updating your phone). Just let it finish and an error will occur. Just ignore and turn your phone off and boot it again. Finally, you are in 2.3 firmware but you are still in L07.)
4. Next force update with P7-L10_V100R001C00B135SP03_BACK_TO_L10 and let it finish. And finally you are in 2.3 firmware with L10. (At this time you can now install any L10 2.3 firmware. But this firmware is a –test version only.)
5. Finally, install L10 firmware you want. Like: Huawei_Ascend_P7-L10_V100R001C00B135_Israel_Android_4.4.2_EMUI_2.3 or B138.
Good Luck!
Credits to Oxalis of http://4pda.ru/forum/index.php?showtopic=573880&st=1800#entry35337240
I just added 1 step. The first step, because in my phone the TUT is not working without it.

majcomtech said:
Stuffs needed:
1. P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B604.zip or P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B606.zip
2. dload_3.0_down_2.3.zip
3. P7-L07-L05_EMUI2.3_Android 4.4_V100R001C01B125SP03.zip
4. Huawei_Ascend_P7-L10_V100R001C00B135_Israel_Android_4.4.2_EMUI_2.3.zip
5. Huawei_Ascend_P7-L10_V100R001C00B135_Israel_Android_4.4.2_EMUI_2.3.zip or B138
(Just ask uncle google about these stuffs)
From EMUI_3.0_for_P7-L10
1. Force update using EMUI 3.0 stock recovery the P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B604 or P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B606 on your P7 L07-L10 B604. (Just wait until it finish with error. Just ignore and let your phone boot). Note: If you are using CWM, flash EMUI 3.0 Stock recovery first using fastboot, if not just ignore and continue this step).
2. Next force update with dload_3.0_down_2.3. (Also, wait until it finish with error. Ignore and boot your phone again).
3. Next force update with P7-L07-L05_EMUI2.3_Android 4.4_V100R001C01B125SP03. (It will update using 2.3 stock recovery, just after a few second it will boot again into emui 3.0 recovery. Just let it finish and an error will occur. Just ignore and turn your phone off and boot it again. Finally, you are in 2.3 firmware but you are still in L07.)
4. Next force update your with P7-L10_V100R001C00B135SP03_BACK_TO_L10 and let it finish. And finally you are in 2.3 firmware with L10. (At this time you can now install any L10 2.3 firmware. But this firmware is a –test version only.)
5. Finally, install L10 firmware you want. Like: Huawei_Ascend_P7-L10_V100R001C00B135_Israel_Android_4.4.2_EMUI_2.3 or B138.
Good Luck!
Credits to Oxalis of http://4pda.ru/forum/index.php?showtopic=573880&st=1800#entry35337240
I just added 1 step. The first step, because in my phone the TUT is not working without it.
Click to expand...
Click to collapse
Much easier to downgrade from EMUI 3.0 is install EMUI 2.3 ROM like B135/B138 via ADB .
Flashing on images:good:

jkmaxfli said:
Much easier to downgrade from EMUI 3.0 is install EMUI 2.3 ROM like B135/B138 via ADB .
Flashing on images:good:
Click to expand...
Click to collapse
Yes, I know that. 'Coz you only have to flash images using fastboot. But let me ask you, flashing images using abd/fastboot, will 2.3 stock recovery works? I will answer that, it is NO. Now, since the stock recovery of 2.3 is not working, do you think it is the correct way to fully revert back EMUI 3.0 to UI 2.3? The TUT will fully revert back your EMUI 3.0 to UI 2.3.
Anyway, I just posted this revised TUT just to help. Still users have a choice which way they will use.
1. The easiest way by flashing, but not fully reverted back 'coz of not working 2.3 stock recovery.
2. Or the hardiest one (needs patience) which 100% fully reverted back to 2.3.

majcomtech said:
Stuffs needed:
1. P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B604.zip or P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B606.zip
2. dload_3.0_down_2.3.zip
3. P7-L07-L05_EMUI2.3_Android 4.4_V100R001C01B125SP03.zip
4. Huawei_Ascend_P7-L10_V100R001C00B135_Israel_Android_4.4.2_EMUI_2.3.zip
5. Huawei_Ascend_P7-L10_V100R001C00B135_Israel_Android_4.4.2_EMUI_2.3.zip or B138
(Just ask uncle google about these stuffs)
From EMUI_3.0_for_P7-L10
1. Force update using EMUI 3.0 stock recovery the P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B604 or P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B606 on your P7 L07-L10 B604. (Just wait until it finish with error. Just ignore and let your phone boot). Note: If you are using CWM, flash EMUI 3.0 Stock recovery first using fastboot, if not just ignore and continue this step).
2. Next force update with dload_3.0_down_2.3. (Also, wait until it finish with error. Ignore and boot your phone again).
3. Next force update with P7-L07-L05_EMUI2.3_Android 4.4_V100R001C01B125SP03. (It will update using 2.3 stock recovery, just after a few second it will boot again into emui 3.0 recovery. Just let it finish and an error will occur. Just ignore and turn your phone off and boot it again. Finally, you are in 2.3 firmware but you are still in L07.)
4. Next force update your with P7-L10_V100R001C00B135SP03_BACK_TO_L10 and let it finish. And finally you are in 2.3 firmware with L10. (At this time you can now install any L10 2.3 firmware. But this firmware is a –test version only.)
5. Finally, install L10 firmware you want. Like: Huawei_Ascend_P7-L10_V100R001C00B135_Israel_Android_4.4.2_EMUI_2.3 or B138.
Good Luck!
Credits to Oxalis of http://4pda.ru/forum/index.php?showtopic=573880&st=1800#entry35337240
I just added 1 step. The first step, because in my phone the TUT is not working without it.
Click to expand...
Click to collapse
Certainly an interesting guide that is appreciated.
Just would like to functional links to the necessary files and ROM.
I would like to try it.
thanks :good:

Hi
I have P7-L10.
How can I update to EMUI 3.0?
Downloaded the EMUI 3.0 package.
Thx
this : http://emui.huawei.com/plugin.php?id=hwdownload&mod=detail&mid=71

HassanTakno said:
Hi
I have P7-L10.
How can I update to EMUI 3.0?
Downloaded the EMUI 3.0 package.
Thx
this : http://emui.huawei.com/plugin.php?id=hwdownload&mod=detail&mid=71
Click to expand...
Click to collapse
That is not the firmware update of EMUI 3.0 for L10.

majcomtech said:
Stuffs needed:
1. P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B604.zip - http://www.filespr.com/NDMwMTY4Ng/P7-L05-L07-EMUI3-0-Android4-4-V100R001C01B604-zip-speedyshare.html
2. dload_3.0_down_2.3.zip - https://yadi.sk/d/WtJNRpZjcNpto
3. P7-L07-L05_EMUI2.3_Android 4.4_V100R001C01B125SP03.zip - https://mega.co.nz/#!4IFCwaga!mRiDJ4GPlXbnhqFlUzk4FnBzgEsG6-02AThx2zExWdg
4. P7-L10_V100R001C00B135SP03_BACK_TO_L10.zip - https://yadi.sk/d/lcopBbXycNq4Q
5. Huawei_Ascend_P7-L10_V100R001C00B135_Israel_Android_4.4.2_EMUI_2.3.zip or B138
(Just ask uncle google about these stuffs)
From EMUI_3.0_for_P7-L10
1. Force update using EMUI 3.0 stock recovery the P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B604 or P7-L05-L07_EMUI3.0_Android4.4_V100R001C01B606 on your P7 L07-L10 B604. (Just wait until it finish with error. Just ignore and let your phone boot). Note: If you are using CWM, flash EMUI 3.0 Stock recovery first using fastboot, if not just ignore and continue this step).
2. Next force update with dload_3.0_down_2.3. (Also, wait until it finish with error. Ignore and boot your phone again).
3. Next force update with P7-L07-L05_EMUI2.3_Android 4.4_V100R001C01B125SP03. (It will update using 2.3 stock recovery, just after a few second it will boot again into emui 3.0 recovery (sometimes it will hang from 2.3 stock recovery, just power off your phone and power it on again and it will boot into stock recovery 3.0 updating your phone). Just let it finish and an error will occur. Just ignore and turn your phone off and boot it again. Finally, you are in 2.3 firmware but you are still in L07.)
4. Next force update with P7-L10_V100R001C00B135SP03_BACK_TO_L10 and let it finish. And finally you are in 2.3 firmware with L10. (At this time you can now install any L10 2.3 firmware. But this firmware is a –test version only.)
5. Finally, install L10 firmware you want. Like: Huawei_Ascend_P7-L10_V100R001C00B135_Israel_Android_4.4.2_EMUI_2.3 or B138.
Good Luck!
Credits to Oxalis of http://4pda.ru/forum/index.php?showtopic=573880&st=1800#entry35337240
I just added 1 step. The first step, because in my phone the TUT is not working without it.
Click to expand...
Click to collapse
hi bro tnx for your great job ! i have a question , i updated my phone from b604 to b608 , so now can i revert back to emui 2.3 L-10 from b608 L07 with this way ???

farzin0123 said:
hi bro tnx for your great job ! i have a question , i updated my phone from b604 to b608 , so now can i revert back to emui 2.3 L-10 from b608 L07 with this way ???
Click to expand...
Click to collapse
hi...
yes you can. same steps...

farzin0123 said:
hi bro tnx for your great job ! I have a question , i updated my phone from b604 to b608 , so now can i revert back to emui 2.3 l-10 from b608 l07 with this way ???
Click to expand...
Click to collapse
داداش من که تو انجمن گفتم این روش تضمینی انجام بده نگران نباش

PEYMANSTAR said:
داداش من که تو انجمن گفتم این روش تضمینی انجام بده نگران نباش
Click to expand...
Click to collapse
jesus u cant write here like this .. xda will delete it ..

I just wanted to say THANK YOU!
After the update to 3.0 failed I tried a lot of different methods, but this ultimately saved the day!

Hello
Can you help him?
B609 is now on my phone, and I want to return to the factory, B133 was back.
P7-L10 (Hun)
Before it was the official B133SP01 it.
What is the solution? As described above tab through all the steps to do it?
Or is it just the "dload_3.0_down_2.3.zip" should flash and then go up the B133 stock rom?
How do I do that?
(pls.sorry for my english)

kkrisz75 said:
Hello
Can you help him?
B609 is now on my phone, and I want to return to the factory, B133 was back.
P7-L10 (Hun)
Before it was the official B133SP01 it.
What is the solution? As described above tab through all the steps to do it?
Or is it just the "dload_3.0_down_2.3.zip" should flash and then go up the B133 stock rom?
How do I do that?
(pls.sorry for my english)
Click to expand...
Click to collapse
https://mega.co.nz/#!oEM3ABpa!oxqO8vtQvruGF2Ac12sfzhECGENpp-rex7qNlMTg3cY ROLLBACK133SP01
Only L10 & only B609!
Good Luck))

oxalis1970 said:
https://mega.co.nz/#!oEM3ABpa!oxqO8vtQvruGF2Ac12sfzhECGENpp-rex7qNlMTg3cY ROLLBACK133SP01
Only L10 & only B609!
Good Luck))
Click to expand...
Click to collapse
Thank you.
But how to install.
Copy only the sdcard, dload folder and run the phone with 3 buttons.
or still need to install anything before this? eg .: (dload_3.0_down_2.3)?

kkrisz75 said:
Thank you.
But how to install.
Copy only the sdcard, dload folder and run the phone with 3 buttons.
or still need to install anything before this? eg .: (dload_3.0_down_2.3)?
Click to expand...
Click to collapse
Just flash as normal firmware. It works.Not locally!!

works fine thanks oxalis1970 revert back after in b121 for france

meLIanTQ said:
works fine thanks oxalis1970 revert back after in b121 for france
Click to expand...
Click to collapse
does this installation revert to fully functional stock b133?
2.3 recovery, 2.3 boot.... ?
one step only and you go back?

andre1970 said:
does this installation revert to fully functional stock b133?
2.3 recovery, 2.3 boot.... ?
one step only and you go back?
Click to expand...
Click to collapse
One of my friends tried this approach before I could have done that.
In the meantime, it has come to the phone switched off, and then on and off again. Did not stop the process.
Then power button is turned off. He has now reached a point where the recovery is emui2.3 above. However, none of update.app not run. Neither the B133 or B609. In each FAIL get feedback.
ADB is unable to use recovery mode.
I do not dare to start the downgrade to the 2.3 was not to become a brick. I'm afraid to ruin the phone.
Do you have any advice on this?

just copy the dload on sd and install (for me i get a force install)

kkrisz75 said:
One of my friends tried this approach before I could have done that.
In the meantime, it has come to the phone switched off, and then on and off again. Did not stop the process.
Then power button is turned off. He has now reached a point where the recovery is emui2.3 above. However, none of update.app not run. Neither the B133 or B609. In each FAIL get feedback.
ADB is unable to use recovery mode.
I do not dare to start the downgrade to the 2.3 was not to become a brick. I'm afraid to ruin the phone.
Do you have any advice on this?
Click to expand...
Click to collapse
Everything is done at your own risk. Your friend first with a similar problem.Flash only three fingers!

[Q] profiles.xml for Huawei Ascend P7

Hi There.
I was wondering if anybody had the profiles.xml file, or knows where to get it for the P7. i tried installing custom firmware but that got me stuck in a bootloop. I can access TWRP but no further. I tried to restore some backups but they did nothing, so I was just going to create a flash-able zip (Huawei update extractor) but it needs the .xml file mentioned earlier. (Attached is two images of the Huawei update extractor.)
Any help would be greatly appreciated
Thank you.

kenkko said:
Hi There.
I was wondering if anybody had the profiles.xml file, or knows where to get it for the P7. i tried installing custom firmware but that got me stuck in a bootloop. I can access TWRP but no further. I tried to restore some backups but they did nothing, so I was just going to create a flash-able zip (Huawei update extractor) but it needs the .xml file mentioned earlier. (Attached is two images of the Huawei update extractor.)
Any help would be greatly appreciated
Thank you.
Click to expand...
Click to collapse
Flash official recovery (Emui 2.3 for ver. 133 or Emui 3.0 for 609), download 133 or 609 and then try 3 button update.

ibeqa said:
Flash official recovery (Emui 2.3 for ver. 133 or Emui 3.0 for 609), download 133 or 609 and then try 3 button update.
Click to expand...
Click to collapse
Tried that but it didnt work, it wont flash into recovery, luckily i have the warranty for the phone and i am getting it fixed under that.

kenkko said:
Tried that but it didnt work, it wont flash into recovery, luckily i have the warranty for the phone and i am getting it fixed under that.
Click to expand...
Click to collapse
Extract official recovery, shut down your phone, put official recovery in the root of SD card, boot to recovery!
or http://forum.xda-developers.com/ascend-p7/help/to-stock-recovery-t2893281

Cant update nor rollback rom version

Hi someone, i hope...
Recently i do a bad upgrade (I think that i flashed recovery on boot, ups!) and after a long, long while i have the phone working again But....
I can't change rom!!!!
Now i have:
- B609 boot unlocked
- B609 stock recovery
- B609 (Flashed through CWM, the only way i can do it)
But i can't change rom, not by dload, neither twrp, neither cwm
Some help? Any idea?
I can flash every recovery and i have tried to roolback b133, update b620 and even b805, but it doesnt work
Can i try another solution?
Thanks in advance!

I'm having the same issue, neither the original stock rom with emui 2.3 or any 3.0 rom install on my p7, all roms ends with an error and after booting there's some apps missing
EDIT: I've followed the only two guides on this forum and still can't install stock rom emui 2.3

So no way to downgrade from b805???

Hey guys... Look @ my edited answer here:
http://forum.xda-developers.com/showthread.php?p=60766165

I'll try! Thanks!
Tonight i've discovered another issue... :-/
When i switch off the phone and connect usb for charging, the phone switchs on, no charging screen, it boots

I think your phone is "dirty". I dont know the right word in english. Try my solution and be happy

Ohhhh! No luck! It gives me the same error, install failed
I've tried to erase the partitions with fastboot and it says: Command nos allowed, i think' perhaps i have security on, but i dont know how to s-off this terminal

I've entered in engineering mode and i can see: fastboot P7-L10C900B805 while i am in b609 (b805 was installed before the fail) so i have to try to downgrade fastboot. Unfortunately it cannot be done with fastboot, again "Command not allowed" :-S

Try to make a install via fastboot with all partions. I think you can try it with b609. If that not work - i have no idea ! I think that you have to wait for full b805, install that via dload and then you can downgrade. The same issue i have with b609 @ beginn

Flash MyROM 3.3, then flash a 3.0 stock recovery. Now do a normal update to the full b609 using the dload folder. Use thw update feature from the settings menu, and not the 3 button method. From here you can do the same for b621 and then b805.
Hope that helps.

I see this http://forum.xda-developers.com/showthread.php?t=3163748
I think thats help

No way
Nadir_Baderoon said:
Flash MyROM 3.3, then flash a 3.0 stock recovery. Now do a normal update to the full b609 using the dload folder. Use thw update feature from the settings menu, and not the 3 button method. From here you can do the same for b621 and then b805.
Hope that helps.
Click to expand...
Click to collapse
I've tried, same results It's is being complicated...

I can believe it!
87insane said:
I see this http://forum.xda-developers.com/showthread.php?t=3163748
I think thats help
Click to expand...
Click to collapse
Yujuuuuu!!!
I'm now in b800, crossing fingers and copying b609 to flash it.... Flashing!!! Fantastic!!!!!
Huawei cust fail, update post process fail
But I'm on b609, then let's try...
Flashing b621! It's solved!!!!
Thank you very much for your support!
:good::good::good::good::good::good::good::good:
The transition package was the key, but i wasn't thinking in emui version anytime....
b805 again... And.... Success!!!
TWRP and Root (http://forum.xda-developers.com/ascend-p7/general/guide-root-b803-recovery-version-t3157477)
All ok!!!
Thanks, thanks, thanks!

onosenday said:
Yujuuuuu!!!
I'm now in b800, crossing fingers and copying b609 to flash it.... Flashing!!! Fantastic!!!!!
Huawei cust fail, update post process fail
But I'm on b609, then let's try...
Flashing b621! It's solved!!!!
Thank you very much for your support!
:good::good::good::good::good::good::good::good:
The transition package was the key, but i wasn't thinking in emui version anytime....
b805 again... And.... Success!!!
TWRP and Root (http://forum.xda-developers.com/ascend-p7/general/guide-root-b803-recovery-version-t3157477)
All ok!!!
Thanks, thanks, thanks!
Click to expand...
Click to collapse
I'm going to try this method too, wish me luck

[ SOLED] EMUI 3.1 roll back manually

How to manually revert back to from lollipop to EMUI 3. on Kitkat.
I tried to install flashing boot.img and recovery.img and force update, but failed and bricked the phone.
No chance for transition pack since the phone is only in fast boot mode, wiped all data.
(All mistake, but please help)

Its not bricket
Flash Boot.IMG and recover.IMG from 3.1 and then use transition pack. first you have to bring up your system with lollipop / 3.1 - Think in EMUI not in Android.

87insane said:
Its not bricket
Flash Boot.IMG and recover.IMG from 3.1 and then use transition pack. first you have to bring up your system with lollipop / 3.1 - Think in EMUI not in Android.
Click to expand...
Click to collapse
Thank you.
Tried to get 3.1 recovery and boot img but dint get.
Solved the issue with firmwares already with me.
1. Extracted boot, recovery, cust, system image from 609 firmware and flashed all to the phone with adb flash command, phone went into bootloop.
2. Force updated with 800.app (transition pack) in dload folder of SD card, power off, still in boot loop.
3. Force updated with 609.app firmware.
YESSS I am back.
Seems the transition pack brought back the IMUI from 3.1 to 3.0

dranilvt said:
Thank you.
Tried to get 3.1 recovery and boot img but dint get.
Solved the issue with firmwares already with me.
1. Extracted boot, recovery, cust, system image from 609 firmware and flashed all to the phone with adb flash command, phone went into bootloop.
2. Force updated with 800.app (transition pack) in dload folder of SD card, power off, still in boot loop.
3. Force updated with 609.app firmware.
YESSS I am back.
Seems the transition pack brought back the IMUI from 3.1 to 3.0
Click to expand...
Click to collapse
why u just didn't flash 800 in dload and then 609 viad dload again .. without messing some adb fastboot bootloops .. to much messin..

XDADEVX said:
why u just didn't flash 800 in dload and then 609 viad dload again .. without messing some adb fastboot bootloops .. to much messin..
Click to expand...
Click to collapse
Yes, i tried that, but update failed each time.
I did mistake very first, that led to all these mess, tried to install 133 with EMUI 2.3 over the Lollipop, it failed, tried fastboot flash method for 133 again ended up in update failure with all .APP files. That moment I requested for help here.
The above mentioned method only helped me.

You cant falsh a EMUI 2.3 Version over emui 3.1 or 3.0. You have to downgrade. Pls use search!
3 threats are availiable with this issue. Think in emui not in Android.
We try it again.
On witch Version of emui / android your phone starts without touble?

87insane said:
You cant falsh a EMUI 2.3 Version over emui 3.1 or 3.0. You have to downgrade. Pls use search!
3 threats are availiable with this issue. Think in emui not in Android.
We try it again.
On witch Version of emui / android your phone starts without touble?
Click to expand...
Click to collapse
OK, Now in detail.
I am very new to android phone, very new to all these procedures.
My phone after Update to Lollipop lost the key board, before trying any fixes i directly went for re installation.
Tried 133.APP but update failed,(Not aware of versions and other issues, to be honest) so i went for the boot.img, recovery.img extration and flashing using adb (as seen in many threads here), failed.
I tried wiping all data in phone.
So my phone was practically empty, only the flashed boot and recovery images.
Searched the post in forums found out 609, 621, 800 only after i did all wrong.

Okay i unterstand this:
Your phone was on b8xx / emui 3.1 at beginn?
Only keayboard issue was the Problem. And then you've tried to flash b133.
If thats correct you have to flash the last Rom thats booted up your phone. I think that was the lollipop beta. This Rom is not availible as full Rom! Only OTA Version. All *.IMG files must be flash via ADB. Than try to Boot up. If thats work you can downgrade via transition pack to b609 or b133 ......

87insane said:
Okay i unterstand this:
Your phone was on b8xx / emui 3.1 at beginn?
Only keayboard issue was the Problem. And then you've tried to flash b133.
If thats correct you have to flash the last Rom thats booted up your phone. I think that was the lollipop beta. This Rom is not availible as full Rom! Only OTA Version. All *.IMG files must be flash via ADB. Than try to Boot up. If thats work you can downgrade via transition pack to b609 or b133 ......
Click to expand...
Click to collapse
Yes, thats exactly what happened.
Since there is no full rom available, i did something else to come out of the mess.
Any way I learned many things, learning by doing its the best.

okay - its that solved or not? I dont unterstand your answer...

87insane said:
okay - its that solved or not? I dont unterstand your answer...
Click to expand...
Click to collapse
Yes, Now its ok, running on 621 with emui 3.0, but it takes some ram for graphics or so, show 1.85 Gb only dont know whether its normal.

Its normal...
Very nice!
Change thread to [solved] for our gys with the same issue.

[solved] Stuck at B609, weird update behaviour

Hello all,
I want to get back to a "normal system" in order to upgrade to B830. What I did so far:
- When B830 wasn´t out, I changed vendor on B621 to "custc02_vodafone_za" in order to flash B817 --> went fine
- Planning to update to B830, tried to revert trough B800 transition package to B6xx, but got an error
- Few days later flashed B830 boot.img, then tried to flash B830 through dload (someone posted that that works – but not for me)
- Flashed MiUi 5.10.17, but android.system force closed
- Tried MyRom 3.3, but errors both in cwm and twrp
- Tried Se7en Rom 3.8 (based on B602), flashing went fine. But downgrade as in the description doesn´t work.
- Flashing of B609 through dload when on Se7en-Rom/ MiUi also fails
- Flashing flashable B609.zip worked finally
So, I am now on B609, but unable to flash B621/MyRom or whatever. The Update fails immediately.
Does anybody have an idea what I could do? I would really appreciate any help!
Best wishes!

try to replace the twrp/cwm recovery with stock b609 recovery..
then force upgrade b609 again..
after that maybe the b621 update may be flashed through local or force update..
finally the b623 should appear and then the b830 (if not then flash them through local update - especially the b623)..
hope this helps
Gesendet von meinem HUAWEI P7-L10 B830

Thanks for your reply! Unfortunately I already tried that without success, but forgot to mention. The same with 3.0to2.3-downgrade-package/B830/B817..
I assume that by changing the cust following this (http://forum.xda-developers.com/ascend-p7/general/b817-vodacom-users-cust-error-changing-t3211386) guide, something went wrong. Before I did this, all was fine.
@majcomtech sorry for asking so directly, but could you imagine what my problem is? Or what else I could try to revert?

I thought a while about what I´ve done so far and came to the conclusion that downgrading using B800 transition pack failed due to my root access. Flasing Miui (based on Android 4.4) was a mistake and made things complicated.
So I thought about flashing system.img/cust.img/userdata.img/boot.img/recovery.img of B817. Is that a bad idea?
I just don´t want to make things worse and ask first.
Thank you!

I finally made it by flashing system.img/cust.img/userdata.img/boot.img/recovery.img of B817, flashing boot.img(of B830) then updating through dload to B830. B830 had some bugs (no motion control etc.) -->B800-->B621-->cust change back to eu-->reflash B621-->B623-->B830. Maybe this will help anyone, if in a similar situation..

l3Nni said:
I thought a while about what I´ve done so far and came to the conclusion that downgrading using B800 transition pack failed due to my root access. Flasing Miui (based on Android 4.4) was a mistake and made things complicated.
So I thought about flashing system.img/cust.img/userdata.img/boot.img/recovery.img of B817. Is that a bad idea?
I just don´t want to make things worse and ask first.
Thank you!
Click to expand...
Click to collapse
1. Reboot to bootloader
2. Flash CWM 3.0
3. Reboot to recovery mode
3.1 Install from SDCARD1
a. Find My-RoMv3.3.zip
3.2 Back
3.3 Wipe data/factory reset.
3.4 Advance
3.5 Reboot to Bootloader
4. Flash stock recovery for 3.0
5. Flash B621
6. Flash vendor version you want
Now all are normal.

As i wrote above, I was able to solve the problem.. I already tested the way you described , but it didn´t work since I got alway errors in CWM/TWRP.
But now all is fine and thanks for your reply anyway!

l3Nni said:
I finally made it by flashing system.img/cust.img/userdata.img/boot.img/recovery.img of B817, flashing boot.img(of B830) then updating through dload to B830. B830 had some bugs (no motion control etc.) -->B800-->B621-->cust change back to eu-->reflash B621-->B623-->B830. Maybe this help anyone, if in a similar situation..
Click to expand...
Click to collapse
Hi how did you change back to European cust in B621? I'm unable to have the right cust. Thanks
Sent from my HUAWEI P7-L10 using Tapatalk

You can find the cust files here (http://forum.xda-developers.com/showthread.php?t=3211386) in Post #1. Flash them through dload on B621 and you should get back.

Im having something similar.
I have installed the s7ver rom, based on 602.
I changed the recovery to the base one.
Now i tried flashing the update.app from the 609.
tried by force update (Vol+ + Vol- + Power) and via updade from file.
both, give a "Software Update failed" just at start.
It boots normally
Any idea????
Thanks

Look in the Se7en-Rom-3.8 Thread, there is the process oft getting back described. It's because the Rom is based on B602, a beta which is not meant for L10 devices..

l3Nni said:
Look in the Se7en-Rom-3.8 Thread, there is the process oft getting back described. It's because the Rom is based on B602, a beta which is not meant for L10 devices..
Click to expand...
Click to collapse
Found it .... ><
Thanks
http://forum.xda-developers.com/showpost.php?p=56860553&postcount=2