XT1064 (Canada) - Difficulty flashing recovery. - G 2014 Q&A, Help & Troubleshooting

Bought the xt1064 variant from Staples in Canada.
Device is unlocked. Upgraded to lollipop using this thread
Cannot flash recovery. Have tried Windroid tool as well as manually.
When trying to boot into recovery after failed attempt I just get the android with the open chest and an exclamation mark
I receive no errors when flashing recovery just the following text
Code:
cmd: getvar:partition-type:recovery
cmd: getvar:max-download-size
cmd: download:009e66000
cmd: flash:recovery

rb420 said:
Bought the xt1064 variant from Staples in Canada.
Device is unlocked. Upgraded to lollipop using this thread
Cannot flash recovery. Have tried Windroid tool as well as manually.
When trying to boot into recovery after failed attempt I just get the android with the open chest and an exclamation mark
I receive no errors when flashing recovery just the following text
Code:
cmd: getvar:partition-type:recovery
cmd: getvar:max-download-size
cmd: download:009e66000
cmd: flash:recovery
Click to expand...
Click to collapse
Use Flashify to flash TWRP 2.8.0.5 recovery. Its the easiest method

Duck86 said:
Use Flashify to flash TWRP 2.8.0.5 recovery. Its the easiest method
Click to expand...
Click to collapse
I've not gained root access yet.

rb420 said:
I've not gained root access yet.
Click to expand...
Click to collapse
Root the device before flashing recovery. Its always easier.
Follow this guide:
http://forum.xda-developers.com/moto-g-2014/general/xt1063-t3018818

Duck86 said:
Root the device before flashing recovery. Its always easier.
Follow this guide:
http://forum.xda-developers.com/moto-g-2014/general/xt1063-t3018818
Click to expand...
Click to collapse
Which one of these three do I choose for the xt1064?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

rb420 said:
Which one of these three do I choose for the xt1064?
Click to expand...
Click to collapse
My apologies, I didn't read your post properly and didn't realise that you are on the XT1064, use this method to root instead, it is universal and will also flash a recovery for you
http://forum.xda-developers.com/moto-g-2014/development/ultimate-moto-g-2014-toolkit-t2979862

Duck86 said:
My apologies, I didn't read your post properly and didn't realise that you are on the XT1064, use this method to root instead, it is universal and will also flash a recovery for you
http://forum.xda-developers.com/moto-g-2014/development/ultimate-moto-g-2014-toolkit-t2979862
Click to expand...
Click to collapse
Thanks so much. Got my Recovery installed.

rb420 said:
Thanks so much. Got my Recovery installed.
Click to expand...
Click to collapse
No problem! Glad to help

Related

[SPLASH] HTC YOU splash image

This is from the HTC YOU campaign modified to fit our device and edited the device to the dhd.
Preview:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions for eng-soff
1) Download the package
2) Extract the zip
3) Boot into fastboot
4) Run the installer
5) Reboot
Instructions for s-off (PD98IMG)
1) Download the file
2) Place the file in the root of the sdcard
3) Reboot into bootloader
4) Once asked to flash the file press the up volume button
5) Reboot
If this fails you either dont have the fastboot driver OR your device needs eng-soff if you are s-off you can use the PD98IMG file made by steam.
IT WILL NOT WORK IF YOUR S-ON OR UNLOCKED BOOTLOADER
Also I can tell you flashing anything with fastboot is RISKY i.e. splash, radio's, etc
You have been warned if anything goes wrong ie power failure I will :laugh: at you
Click to expand...
Click to collapse
Download eng-soff: Dropbox
Download PD98IMG below is the source: Zippyshare
Steam. said:
Here's a PD98IMG to flash for those without ENG S-OFF, like me.You still need S-OFF.You use this zip ONLY if you don't have the Engineering HBOOT which supports the splash flashing commands.
http://www21.zippyshare.com/v/38159729/file.html
Click to expand...
Click to collapse
XDA_h3n said:
This is from the HTC YOU campaign modified to fit our device and edited the device to the dhd.
Preview:
Instructions:
1) Download the package
2) Extract the zip
3) Boot into fastboot
4) Run the installer
5) Reboot
If this fails you either dont have the fastboot driver OR your device needs eng-soff (some devices have flashed with s-off not sure)
Download: Dropbox
Click to expand...
Click to collapse
Here's a PD98IMG to flash for those without ENG S-OFF, like me.You still need S-OFF.You use this zip ONLY if you don't have the Engineering HBOOT which supports the splash flashing commands.
http://www21.zippyshare.com/v/38159729/file.html
Steam. said:
Here's a PD98IMG to flash for those without ENG S-OFF, like me.You still need S-OFF.You use this zip ONLY if you don't have the Engineering HBOOT which supports the splash flashing commands.
http://www21.zippyshare.com/v/38159729/file.html
Click to expand...
Click to collapse
Thanks steam for the file will update the thread asap and credit you.
Whats difference of S-OFF and ENG S-OFF
3498BoyZ said:
Whats difference of S-OFF and ENG S-OFF
Click to expand...
Click to collapse
ENG S-OFF supports additional commands and offers several more options in hboot
example of eng s-off

[Q] HELP! RUU needed!

Hi,
I have an unlocked HTC ONE WWE, from GCC, CID is HTC_J15 more info below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So here are the things I did with my HTC One.
1. Unlocked the bootloader.
2. Root the phone. Everything was fine.
3. Tried to perform S-OFF using rumrunner using Parallels (though Rumrunner said no VMs) and sugo proceeded, but still have S-ON.
4. Phone was working fine.
5. Installed Android Revolution HD 40.3 following the guide here, http://forum.xda-developers.com/showthread.php?t=2265618.
6. Performed wipe then reboot.
7. Now stuck in boot, HTC will load then it will turn off, then it will turn ON and proceed to recovery, I was using the latest TWRP recovery.
8. Nothing change after multiple tries.
9. I need to find the correct RUU, but I can't seem to find it, anyone who can help please?
Thanks!!!!
cainneach said:
Hi,
I have an unlocked HTC ONE WWE, from GCC, CID is HTC_J15 more info below:
So here are the things I did with my HTC One.
1. Unlocked the bootloader.
2. Root the phone. Everything was fine.
3. Tried to perform S-OFF using rumrunner using Parallels (though Rumrunner said no VMs) and sugo proceeded, but still have S-ON.
4. Phone was working fine.
5. Installed Android Revolution HD 40.3 following the guide here, http://forum.xda-developers.com/showthread.php?t=2265618.
6. Performed wipe then reboot.
7. Now stuck in boot, HTC will load then it will turn off, then it will turn ON and proceed to recovery, I was using the latest TWRP recovery.
8. Nothing change after multiple tries.
9. I need to find the correct RUU, but I can't seem to find it, anyone who can help please?
Thanks!!!!
Click to expand...
Click to collapse
There's an old RUU for you, but you need s-off to run it.
so before that, what exactly is the TWRP version number, please reboot to recovery and tell us which version it is.
Hi
nkk71 said:
There's an old RUU for you, but you need s-off to run it.
so before that, what exactly is the TWRP version number, please reboot to recovery and tell us which version it is.
Click to expand...
Click to collapse
TWRP is 2.6.3.
cainneach said:
TWRP is 2.6.3.
Click to expand...
Click to collapse
yes and exactly which one 2.6.3.0 or 2.6.3.3, it makes a big difference, here's 2.6.3.3 http://techerrata.com/browse/twrp2/m7 don't use a download manager otherwise it will fail, check MD5, then flash it and install 40.x again, should be ok then.

Help with recovery.

I Have a PRA-LX1C33 (P8 Lite 2017), with bootloader unlocked provide by Huawei.
I need to install a rom PRA-LX1C432, but I need to install first a recovery, and that's when trouble begins.
I try anyways to install TWRP Recovery, but without success. I try "fastboot flash recovery [recovery name]", and "fastboot boot [recovery name]"....
Nothing. Give this error, see the image.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can someone help me. Thanks to all.
Hi,
This error happens when frpLock is enabled. Huawei fastboot requires OEM unlock+frpUnlock. Search around how to disable it.
Cosmox_ said:
Hi,
This error happens when frpLock is enabled. Huawei fastboot requires OEM unlock+frpUnlock. Search around how to disable it.
Click to expand...
Click to collapse
I can't find anything to unlock FRP and OEM.
Can you help me?
How I can do this?
Thanks.
ferrarinews said:
I can't find anything to unlock FRP and OEM.
Can you help me?
How I can do this?
Thanks.
Click to expand...
Click to collapse
You will need to flash stock Oreo again, boot it, and remove the OEM lock from developers menu. After this you can flash normally in fastboot.
Cosmox_ said:
You will need to flash stock Oreo again, boot it, and remove the OEM lock from developers menu. After this you can flash normally in fastboot.
Click to expand...
Click to collapse
In advance Thanks, but I not have oreo rom stock, i have nougat. To have oreo i need first change oeminfo, because my rom is PRA-LX1C33 and i need PRA-LX1C432 european.
I see th rom here http://www.stechguide.com/huawei-p8-lite-2017-b322-oreo-firmware/, but I'm afraid to install because mine is C33, not C432.
I stuck, and i don't no what to do.
Okey, so you just need to do the same thing on your Nougat firmware (in Dev. Menu) to release the frpLock. If the option is not available then flash the firmware again, unlock OEM from Dev. Menu then unlock bootloader again.
What's your current situation ? ( Rom booting, recovery installed, firmware version...etc)
Cosmox_ said:
Okey, so you just need to do the same thing on your Nougat firmware (in Dev. Menu) to release the frpLock. If the option is not available then flash the firmware again, unlock OEM from Dev. Menu then unlock bootloader again.
What's your current situation ? ( Rom booting, recovery installed, firmware version...etc)
Click to expand...
Click to collapse
I have PRA-LX1C33B137, bootloader unlock.

[RECOVERY][UNOFFICIAL]TWRP 3.2.3-0 Touch Recovery [C1N]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. It's a full touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.​
Downloads:
GitHub
Instructions:
- Download recovery
- Boot into recovery using fastboot boot command. Do not flash recovery.
- Do your work
- Reboot
Bugs:
- Decryption doesn't work
XDA:DevDB Information
TWRP 3.2.3-0 Touch Recovery, Tool/Utility for the Nokia 7
Contributors
TheImpulson
Source Code: https://github.com/nokia-dev/android_device_nokia_C1N-TWRP
Version Information
Status: Stable
Created 2018-10-23
Last Updated 2018-10-23
Reserved
Reserved
Reserved
bu first thing i think it's how to unlock the phone
jpfree said:
bu first thing i think it's how to unlock the phone
Click to expand...
Click to collapse
Unlocking is possible using the unofficial way. Search over the web to know how.
Hi, i unlocking bootloader, how to flash the recovery? in recovery mode not work "adb sideload" command
Thank you
Yoshj said:
Hi, i unlocking bootloader, how to flash the recovery? in recovery mode not work "adb sideload" command
Thank you
Click to expand...
Click to collapse
Don't flash recovery permanently. I won't provide support if you did.
For adb sideload. Turn on adb sideload from TWRO first, then use it from PC.
How to unlocked bootloader... I t4y every method but still no work
what can we do here? Installing Gapps? wipe Cache? Backup?
3Dota said:
what can we do here? Installing Gapps? wipe Cache? Backup?
Click to expand...
Click to collapse
I.g. all should work.
I made the techmesto tutorial to install official firmware and my phone is now running Android Pie. But the last step is to re-lock bootloader so this twrp won't work for me right?
Because I used this command: fastboot reboot recovery recovery.img
But my phone was stuck on "no command" screen.
Ty.
PaideLis said:
I made the techmesto tutorial to install official firmware and my phone is now running Android Pie. But the last step is to re-lock bootloader so this twrp won't work for me right?
Because I used this command: fastboot reboot recovery recovery.img
But my phone was stuck on "no command" screen.
Ty.
Click to expand...
Click to collapse
Nope it won't work if you want to relock bootloader with it.
Thank you,it booted on my 4.2 panther
Closing down the thread! This recovery is now merged in PL2 as its common. Kindly use its thread.

Question How to update or reflash stock samsung firmware if you are rooted?

I have rooted S21 ultra Exnos it has TWRP and decrypted what i want to ask is
If there is new firmware released which i want to update it then what is the procedure so that i can have my settings , root. and internal storage date? even TWRP
as device is decrypted if i flash the stock samsung firmware via ODIN then it will encrypt storage again right? which will format my internal storage as that is main thing... which i dont want and will overwrite the stock recovery also
please let me know options in comments
First, search for the ROM that you'd like and find out what suites you best yourself, that way you're more aware of the risks and what you actually need.
Second, flashing any ROM on decrypted device doesn't encrypt it again as long as you flash the decryption zip again like dm-verity, and flashing ROM with ODIN doesn't replace the recovery. You need to flash recovery through "AP" to do that.
Goodluck.
XDHx86 said:
First, search for the ROM that you'd like and find out what suites you best yourself, that way you're more aware of the risks and what you actually need.
Second, flashing any ROM on decrypted device doesn't encrypt it again as long as you flash the decryption zip again like dm-verity, and flashing ROM with ODIN doesn't replace the recovery. You need to flash recovery through "AP" to do that.
Goodluck.
Click to expand...
Click to collapse
i was talking about G998BXXU3AUF6 Samsung stock firmware which has 5 files total in ZIP but we need to flash 4 including AP
and i was not aware of that dm-verity zip will work in Samsung devices too as i decrypted it by the method which was mentioned in TWRP by command multi disabler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
nitinvaid said:
i was talking about G998BXXU3AUF6 Samsung stock firmware which has 5 files total in ZIP but we need to flash 4 including AP
and i was not aware of that dm-verity zip will work in Samsung devices too as i decrypted it by the method which was mentioned in TWRP by command multi disabler
View attachment 5353701
Click to expand...
Click to collapse
If you mean stock ROM you can get yours from sammobile it has whole archive of ROMs.
DM-Varity was just an example, you can use whatever works for you.
Also you can always just flash TWRP again. No biggie.

Categories

Resources