Will ghost roms work on the XT1060? I know that technically the XT1060 is classified as ghost_verizon and while I know that hardware and software wise there is no difference I'm wondering if there's a difference in radio. The reason I ask is because I haven't been able to get the CM12 nightlies to flash but I'm not sure if it's just because it doesn't fall under ghost or if it's an issue with TWRP or something else.
Scoopta said:
Will ghost roms work on the XT1060? I know that technically the XT1060 is classified as ghost_verizon and while I know that hardware and software wise there is no difference I'm wondering if there's a difference in radio. The reason I ask is because I haven't been able to get the CM12 nightlies to flash but I'm not sure if it's just because it doesn't fall under ghost or if it's an issue with TWRP or something else.
Click to expand...
Click to collapse
I have xt1060, and I ran several cm ROMs.
Sent from my Moto X using XDA Free mobile app
I have xt1060, and I ran several cm ROMs.
Sent from my Moto X using XDA Free mobile app
Click to expand...
Click to collapse
Were they the XT1060 or ghost roms though because cm makes XT1060 specific Roms as well?
Scoopta said:
Were they the XT1060 or ghost roms though because cm makes XT1060 specific Roms as well?
Click to expand...
Click to collapse
I use the Ghost nightlies and they work well. Most people have to flash CM11 before flashing CM12. If you haven't had CM11 on your phone (you don't have to set it up) that may be the problem.
mikeoswego said:
I use the Ghost nightlies and they work well. Most people have to flash CM11 before flashing CM12. If you haven't had CM11 on your phone (you don't have to set it up) that may be the problem.
Click to expand...
Click to collapse
Really?? Why would that be? I mean I'll try it but that's confusing.
Scoopta said:
Really?? Why would that be? I mean I'll try it but that's confusing.
Click to expand...
Click to collapse
It's been discussed in other threads, but can't recall the exact reason.
However, I did try from stock 4.4.4 to cm12, and that failed. Thus, I installed cm11 first, let it boot to home screen, then rebooted to recovery and installed cm12. Haven't looked back since (2+ months).
Sent from my Moto X using XDA Free mobile app
jco23 said:
It's been discussed in other threads, but can't recall the exact reason.
However, I did try from stock 4.4.4 to cm12, and that failed. Thus, I installed cm11 first, let it boot to home screen, then rebooted to recovery and installed cm12. Haven't looked back since (2+ months).
Sent from my Moto X using XDA Free mobile app
Click to expand...
Click to collapse
Alright then I'll take that advice and give it a shot.
Related
Would it be possible to get safestrap working on the international version and if so would we then be able to flash roms without needing Odin to get Wi-Fi working? I've tried the other version and it installs and I get the new splash screen but if I press recovery the screen just goes black.
Sent from my GT-I9295 using XDA Premium HD app
Does international version not have CWM already?
GT-i9295(i537) running SafeStrap
yankeesfan714 said:
Does international version not have CWM already?
GT-i9295(i537) running SafeStrap
Click to expand...
Click to collapse
CWM doesn't do the same thing of creating those "slots" that Safestrap does... unless something new has happened with CWM of late since I haven't used it for quite some time personally.
br0adband said:
CWM doesn't do the same thing of creating those "slots" that Safestrap does... unless something new has happened with CWM of late since I haven't used it for quite some time personally.
Click to expand...
Click to collapse
Safestrap seems to offer better functionality than CWM and we have to use Odin to get Wi-Fi working.
Sent from my GT-I9295 using XDA Premium HD app
There is a thread about this in the General section you might want to check out.
Miami_Son said:
There is a thread about this in the General section you might want to check out.
Click to expand...
Click to collapse
That's concentrating on the AT&T version not the international, I posted in there but no one responded.
Sent from my GT-I9295 using XDA Premium HD app
msmall22 said:
That's concentrating on the AT&T version not the international, I posted in there but no one responded.
Sent from my GT-I9295 using XDA Premium HD app
Click to expand...
Click to collapse
Double-posting won't help your effort and is actually frowned upon in here.
Hey guys I was chatting with arrrghhh and he told me that he can try whipping TWRP for us if we want it. He even thought we had it since long time. Lol
I will be one for sure to have this recovery even though cwm touch is working great for me. But more options the better for our devices.
Read arrrghhh post
http://forum.xda-developers.com/showthread.php?p=46261133
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
Finally, thought TWRP would never make of on this phone.
Sent from my MB886 using xda app-developers app
Yeah me too. Im crossing my fingers
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
That's exciting news ... I use TWRP 2.6 on a Samsung Galaxy S2 Skyrocket and on my Kindle and it is great. I've always wished to have it for my phone, plus it's reminiscent of those old SafeStrap days.
I'm dreadfully ignorant here...
What exactly is the difference between TWRP and CWM/CWM-Based Recoveries?
ATM this doesn't seem too exciting... (Of course I haven't used TWRP before so that doesn't really help either...)
It have more many options to mess with. But so after testing the first attempt we still have the same offset problems. So this is a work in progress
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
Basically twrp is like safestrap for a unlocked bootloader.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Basically twrp is like safestrap for a unlocked bootloader.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
So it supports multi-ROM or does it not have that functionality from SS3?
No, for my understanding multirom is a modified TWRP or TWRP with the multirom hack. Yes is run through TWRP but we also need the hack to be active on it for it to work. In other words that is a different project
Sent from my Atrix HD using Pacman rom and XDA 4 Premium
For the ones that don't know, think of TWRP like CWM Touch only with more options and things to do. It has features like a file manager, multi-zip flashing, more ways to manipulate the sd card (partition, file system, etc), custom themes, and more.
this is awesome
SVLAN said:
Hey guys I was chatting with arrrghhh and he told me that he can try whipping TWRP for us if we want it. He even thought we had it since long time. Lol
I will be one for sure to have this recovery even though cwm touch is working great for me. But more options the better for our devices.
Read arrrghhh post
http://forum.xda-developers.com/showthread.php?p=46261133
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
Click to expand...
Click to collapse
we will have to give Arrrrghh a huge thanks when we cant get twrp on this device why do i always happen to get devices that cant run twrp
my tab 2 7.0 wont run
Any update on this?
I dont think we will see anything soon on this as it needs lots of work.
TecknoFreak said:
I dont think we will see anything soon on this as it needs lots of work.
Click to expand...
Click to collapse
MB886 is now supported? Thanks
Doesn't look like the AHD is supported: http://teamw.in/twrp_view_all_devices
audit13 said:
Doesn't look like the AHD is supported: http://teamw.in/twrp_view_all_devices
Click to expand...
Click to collapse
http://forum.xda-developers.com/atrix-hd/development/twrp-recovery-atrix-hd-t2858505
audit13 said:
Doesn't look like the AHD is supported: http://teamw.in/twrp_view_all_devices
Click to expand...
Click to collapse
I can not find download links for AHD?
There is no working version from what I can see.
audit13 said:
There is no working version from what I can see.
Click to expand...
Click to collapse
I really do not understand? Why does anyone give a TWRP MB886? It is too difficult?
This is probably our best bet
https://twitter.com/dhacker29/status/556650558745223169
I'm running cloudyflex 2.4 and each time I make a backup with twrp it fails. I'm on a Verizon 24a model with twrp 2.7 any suggestions???
Sent from my VS980 4G using XDA Premium 4 mobile app
mpetruzz said:
I'm running cloudyflex 2.4 and each time I make a backup with twrp it fails. I'm on a Verizon 24a model with twrp 2.7 any suggestions???
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That was a bug with 2.7 and stock ROMs. Seems like the larger the ROM, the more likely it was to happen. It was fixed with 2.7.1. But it had a screen timeout bug. I'd highly suggest dr87's custom 2.7.1, its built with his kernel, which fixed the screen timeout bug. Plus he added thermal control and knock on. Much better than stock TWRP
JRJ442 said:
That was a bug with 2.7 and stock ROMs. Seems like the larger the ROM, the more likely it was to happen. It was fixed with 2.7.1. But it had a screen timeout bug. I'd highly suggest dr87's custom 2.7.1, its built with his kernel, which fixed the screen timeout bug. Plus he added thermal control and knock on. Much better than stock TWRP
Click to expand...
Click to collapse
I searched XDA and the web and can't find that. Could you point me in the right direction??
mpetruzz said:
I searched XDA and the web and can't find that. Could you point me in the right direction??
Click to expand...
Click to collapse
https://www.mediafire.com/folder/hid9ny9jl91yx/TWRPS
Could be the auto file name it's creating is too long. Try manually naming your backup.
shiftr182 said:
https://www.mediafire.com/folder/hid9ny9jl91yx/TWRPS
Click to expand...
Click to collapse
Thanks so much!! There are two files for the verizon phone, which one do I use??
mpetruzz said:
Thanks so much!! There are two files for the verizon phone, which one do I use??
Click to expand...
Click to collapse
You need to figured out which display panel you have, LGD or JDI.
What the heck is this?
Sent from my XT1053 using XDA Free mobile app
d0g said:
What the heck is this?
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Looks like you shifted from stock to CM and restored all the apps (moto stock apps included) and sensor services is now incompatible with your current ROM.
Nah, i'm running stock, didn't do anything.
It's gone after a reboot, but curious what triggered it.
d0g said:
Nah, i'm running stock, didn't do anything.
It's gone after a reboot, but curious what triggered it.
Click to expand...
Click to collapse
Have you done downgrade from 5.1 to 4.4.x lately?
It's usually caused by that and it does exactly what it says.
If you didn't downgrade, then maybe you've uninstalled some of the moto apps related, which might have upgraded the fw.
liveroy said:
Have you done downgrade from 5.1 to 4.4.x lately?
It's usually caused by that and it does exactly what it says.
If you didn't downgrade, then maybe you've uninstalled some of the moto apps related, which might have upgraded the fw.
Click to expand...
Click to collapse
It happens on 5.1 stock firmware too.. I don't exactly know what it is.. and I didn't receive this norification yet, but here's a link!
Sorry is in Italian language: https://plus.google.com/+GiorgioMannelli/posts/43MB9VXdWjj
Weird, also got this after a crash and auto reboot. Rebooted again and it went away.
5.1.1 mostly stock (twrp flashed from here on xda and) with xposed
Okay so bootloader unlocked , twrp installed and everything , tried Nexus experience rom installed with no problems but no 4g lte signal ? Anyone else having this issue? If so what Roms have data working?
Remove mods
I'm using stock xt1095 6.0 on my xt1096, which means no cdma network, only gsm that I need lol.
Everything works fine.
OrenGazala said:
I'm using stock xt1095 6.0 on my xt1096, which means no cdma network, only gsm that I need lol.
Everything works fine.
Click to expand...
Click to collapse
So u can install any rom on xt1096 as long as u r not using CDMA ? Gsm will work?
Sent from my XT1096 using Tapatalk
razi914 said:
So u can install any rom on xt1096 as long as u r not using CDMA ? Gsm will work?
Sent from my XT1096 using Tapatalk
Click to expand...
Click to collapse
I'm not that sure but I believe it is possible though...
I flashed the stock 6.0 and right now system recognizes my phone as xt1095, and I use gsm so everything's fine.
OrenGazala said:
I'm not that sure but I believe it is possible though...
I flashed the stock 6.0 and right now system recognizes my phone as xt1095, and I use gsm so everything's fine.
Click to expand...
Click to collapse
Thanks man ,
Um, any experienced member can confirm this?
Sent from my XT1096 using Tapatalk
razi914 said:
Thanks man ,
Um, any experienced member can confirm this?
Sent from my XT1096 using Tapatalk
Click to expand...
Click to collapse
I bet #AGISCI knows the answer lol
razi914 said:
Thanks man ,
Um, any experienced member can confirm this?
Sent from my XT1096 using Tapatalk
Click to expand...
Click to collapse
Yes, if you flash a GSM rom such as the xt1095, it will work for GSM companies. But you will lose CDMA which means it won't work with verizon's service.
Sent from my XT1095 using Tapatalk
AGISCI said:
Yes, if you flash a GSM rom such as the xt1095, it will work for GSM companies. But you will lose CDMA which means it won't work with verizon's service.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Great! Thats nice to know , gotta find some stable marshmallow rom now
Sent from my XT1096 using Tapatalk
AGISCI said:
Yes, if you flash a GSM rom such as the xt1095, it will work for GSM companies. But you will lose CDMA which means it won't work with verizon's service.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Hey man, a bit off topic but i need some help , i cant unlock my device xt1096 , it says "your device does not qualify for bootloader unlocking" , what shud i do? Its a Verizon device
Sent from my XT1096 using Tapatalk
AGISCI said:
Yes, if you flash a GSM rom such as the xt1095, it will work for GSM companies. But you will lose CDMA which means it won't work with verizon's service.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I flashed over the latest version of CM and lost my CDMA LTE service. My phone still registers as a XT1096. Is there a way to get my service back? I'm with Verizon. Or do I have to flash back to stock, relock bootloader and start all over again?
Ozonethegreat said:
I flashed over the latest version of CM and lost my CDMA LTE service. My phone still registers as a XT1096. Is there a way to get my service back? I'm with Verizon. Or do I have to flash back to stock, relock bootloader and start all over again?
Click to expand...
Click to collapse
As I said in the post you quoted you WILL lose cdma service if you flash it. There is no way to have a stock rom with marshmallow and cdma.
Sent from my XT1095 using Tapatalk
AGISCI said:
As I said in the post you quoted you WILL lose cdma service if you flash it. There is no way to have a stock rom with marshmallow and cdma.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I know that, but I'm asking, how do I get my service back? I've tried different roms, but still no LTE
Ozonethegreat said:
I know that, but I'm asking, how do I get my service back? I've tried different roms, but still no LTE
Click to expand...
Click to collapse
You will need to go back to the stock 5.1 Verizon firmware.
Sent from my XT1095 using Tapatalk
AGISCI said:
You will need to go back to the stock 5.1 Verizon firmware.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Ok, that's what I was hoping would do the trick. Thanks for confirming.
Ozonethegreat said:
Ok, that's what I was hoping would do the trick. Thanks for confirming.
Click to expand...
Click to collapse
just flashed latest nightly and have verizon lte data
just tested phone calls are working also
Pittsm325 said:
just flashed latest nightly and have verizon lte data
just tested phone calls are working also
Click to expand...
Click to collapse
I'll second this, latest CM nightly has full CDMA LTE support. Been 3 or so hours haven't seen any major bugs, or anything that would be considered experience breaking.
Only thing your really lose is Moto Voice, as ambient display works basically the same as Active Display albeit without the slower co-processor.
i think the chop for flash light and twist for camera works better then moto tbh and no real bugs yet either but havent played with it much
I'd love a stock rooted 6.0 rom. I'm stock rooted on 5.1 right now and everything is working great. Anyone have an update on CM now that it's been a couple days? Has anyone attempted to add Xposed to 5.1?
I'm not that experienced with this but I have an xt1096 and unlocked the boot loader and flashed twrp on it then did a clean install of cyanpop 5.0(runs android 6.0.1 http://forum.xda-developers.com/showthread.php?t=3277786) it runs nicely in my opinion other than a couple bugs that need squashing