Related
I have stock HDA which was rooted and unlocked using The MYth One tools. I followed instruction to flash HoloBlur X Rom; however, after it rebooted, it flashed 4 color-dots forever. What did I do wrong?
Thanks,
SDNN
What recovery did you use? Did you do a clean wipe?
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
What recovery did you use? Did you do a clean wipe?
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
I used CWM v6.0.2.8 and I did wipe/factory reset.
Thanks,
So you didn't wipe system?
Sent from my PACMAN MATRIX HD MAXX
You could also try mounting the system before installing too.
deeje00 said:
So you didn't wipe system?
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
This..... Also wipe both cache and dalvik cache...
Try again
tiguy99 said:
This..... Also wipe both cache and dalvik cache...
Try again
Click to expand...
Click to collapse
I tried to wipe clean/factory set up
wiped both cache and devik cache
mounted as suggest
I tried all suggestions, but no luck. I couldn't flash this rom. I could flash liquid smooth with out problem; however, I would like to try out this rom as I want to use the vehicle dock mode.
Regards,
Once again I don't see wipe system in there man.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Once again I don't see wipe system in there man.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
thanks for reply.
However, I don't see the "wipe system".
In CWM base recovery v6.0.2.8, I only saw:
reboot system
install zip from sdcard
install zip from side load
wipe data/factory reset
wipe cache partition
backup and restore
mount and storage
advance
I went through every mentioned catergories; however, I did know how to wipe the system. Great appreciative for better instructions.
Regards,
Wipe System is under Mounts & Storage
Look for the Format System option
tiguy99 said:
Wipe System is under Mounts & Storage
Look for the Format System option
Click to expand...
Click to collapse
thanks for suggestion. Did as what you suggested; however, I couldn't get it work. Flashed okay, yet when it booted up - it ran for ever with 4 color dot animated.
will try different Rom then.
sdnn said:
thanks for suggestion. Did as what you suggested; however, I couldn't get it work. Flashed okay, yet when it booted up - it ran for ever with 4 color dot animated.
will try different Rom then.
Click to expand...
Click to collapse
Did you say yes when it asked about disabling stock recovery ?
Sent from my MB886 using Tapatalk 4
superp32 said:
Did you say yes when it asked about disabling stock recovery ?
Sent from my MB886 using Tapatalk 4
Click to expand...
Click to collapse
Thanks for all help. I finally was able to flash this HoloBlur X rom. It would be even better if voice search is working.
I tried out the official liquid smooth v 2.9 for atrix HD, yet there were bugs that I couldn't overcome:
1. Vibration didn't work as it was put under vibration
2. Other didn't hear me or vice versa, have to reboot the phone to make it works for calling
3. Speaker phones worked on-off randomely
Regards,
sdnn said:
Thanks for all help. I finally was able to flash this HoloBlur X rom. It would be even better if voice search is working.
I tried out the official liquid smooth v 2.9 for atrix HD, yet there were bugs that I couldn't overcome:
1. Vibration didn't work as it was put under vibration
2. Other didn't hear me or vice versa, have to reboot the phone to make it works for calling
3. Speaker phones worked on-off randomely
Regards,
Click to expand...
Click to collapse
Hi
I had the same problem , for some reason I couldn't boot up the tuned version , but what I did is installed the carbon rom and let it boot up then flashed the performance version and it booted up , and I haven't tried to go back and flash the Tuned version ,
I am glad it worked for you .:good::good:
So what did you do ? and what version did you flash ?
what I did:
wipe/factory reset
wipe dalvik cache
format system
mount system
flash rom
reboot
flash holo apps
HoloBlur, THE END?
Well that is strange. After following and catching up/ reading almost the complete thread, one can see what has happened and happening to that rom's "continued" development.
Last I read was the OP was ill and requested someone else pick up the project/development. Android Pizza stepped up to the plate and the latest update was his confirmation on 11/26/2013 that he/it was still being worked on. So I was surprised to see the thread closed as per OP request by the mods.
Did Android Pizza decide to pass or did the mod read an old request?
I'd like to know, as I liked that rom, and was hoping for it's continued development, at least to the point of fixing a few bugs, namely the voice search issue.
Thanks,
-CC
Because I am a Chinese boy, so my English is not very good. I hope you can forgive
My device is Google NEXUS6 ,can use the CM12, mokee, chroma，but use Blisspop，My device Infinite loop or crash in the second screen.
Tried many times to recover the official ROM,but still the same.
Very, very fond of blisspop ROM,I hope you can help me，Thank you !
Which gapps are you using? Have you tried flashing just bliss pop, boot into ROM, then go back into recovery and flash gapps?
bigstunta101 said:
Which gapps are you using? Have you tried flashing just bliss pop, boot into ROM, then go back into recovery and flash gapps?
Click to expand...
Click to collapse
Thank you for your reply
As mainland China can not use Google, so I did not flash gapps.
My steps are:
1. Restore official factory firmware (5.0 or 5.1)
2. NRT 2.4 Get ROOT
3. Obtain REC
4.flash Blisspop Rom
5.wipe data / factory reset, wipe cache partition
why continue using blisspop ?? just use a different rom.. a lot of roms is out there
Your bootloader is unlocked right?
bigstunta101 said:
Your bootloader is unlocked right?
Click to expand...
Click to collapse
Thank you for your reply
YES
I see a lock device is turned on in the following {Google} LOGO
reyscott1968 said:
why continue using blisspop ?? just use a different rom.. a lot of roms is out there
Click to expand...
Click to collapse
Thank you for your reply
Currently only see Blisspop Rom has Floating window function
I'm too used to this feature.
Deeply fascinated by it
Next time you flash the ROM, wipe dalvik, and cache before you reboot the device into the system and see if that helps
jfa2008 said:
Thank you for your reply
As mainland China can not use Google, so I did not flash gapps.
My steps are:
1. Restore official factory firmware (5.0 or 5.1)
2. NRT 2.4 Get ROOT
3. Obtain REC
4.flash Blisspop Rom
5.wipe data / factory reset, wipe cache partition
Click to expand...
Click to collapse
U can't wipe data, system AFTER u flash, u need to wipe the device, then flash the rom, then boot the rom, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
soupysoup said:
U can't wipe data, system AFTER u flash, u need to wipe the device, then flash the rom, then boot the rom, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged
bigstunta101 said:
Next time you flash the ROM, wipe dalvik, and cache before you reboot the device into the system and see if that helps
Click to expand...
Click to collapse
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged
jfa2008 said:
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged
Click to expand...
Click to collapse
Yes but if u wipe AFTER flashing, this will always happen, what u need to do is this,
Download rom
Boot to recovery,
Wipe system, data, cache, dalvik cache
Flash rom
Boot
That's it, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
soupysoup said:
Yes but if u wipe AFTER flashing, this will always happen, what u need to do is this,
Download rom
Boot to recovery,
Wipe system, data, cache, dalvik cache
Flash rom
Boot
That's it, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
Please forgive my English is not very good, so you may not be able to fully understand your meaning.
I tried Wipe system, data, cache, dalvik cache
And then Flash rom
But it is still a problem.
But you say——“don't wipe after flashing”？
jfa2008 said:
Thank you for your reply
Please forgive my English is not very good, so you may not be able to fully understand your meaning.
I tried Wipe system, data, cache, dalvik cache
And then Flash rom
But it is still a problem.
But you say——“don't wipe after flashing”？
Click to expand...
Click to collapse
No dont wipe after flashing.
Also grab a logcat as that will help find the issue.
zelendel said:
No dont wipe after flashing.
Also grab a logcat as that will help find the issue.
Click to expand...
Click to collapse
Please forgive me for a long time to reply to you
Because China is not allowed to visit a lot of websites
I re testing, and then tell you the result. Thank you
Yesterday, I downloaded the app softkeyz and used it to change my Navigational Keys to something different.
But after I rebooted, instead I saw that my status bar was gone and that my keys are gone. I also couldn't change my wallpaper.
So, After comprehensive searching on XDA, I figured out it was a SYSTEMUI.apk problem. But I couldn't find a moto G 2014 systemui.apk to install.
So now I'm looking for advice, a moto G systemuiapk I'm also wondering if flashing a theme will help. Thanks in Advance!
Current Rom ?
Try flashing some different rom.
@ArtRahul
I have never really flashed a rom. But I have TWRP, what rom do I flash?
MotorolaMadMan said:
@ArtRahul
I have never really flashed a rom. But I have TWRP, what rom do I flash?
Click to expand...
Click to collapse
Whichever you want, pal. Try with Cyanogenmod to begin. Peek over here: http://forum.xda-developers.com/moto-g-2014/development if you want
***Find tutorials before if you're not sure of what to do***
MotorolaMadMan said:
@ArtRahul
I have never really flashed a rom. But I have TWRP, what rom do I flash?
Click to expand...
Click to collapse
Yup, just go download any custom rom with their respective gapps (CynogenMod 12.1 is recommended though), and then
Steps :
1. Backup your current rom setup,(helps if something goes wrong )
2. Wipe Dalvik Cache, Cache, System and Data, from wipe [Do NOT wipe internal/external storage].
3. Install(flash) the rom zip and gapps.
4. Again wipe cache and dalvik cache.
5. You are ready to reboot to system.
:good:
Well, flashing a custom rom isn't the exact solution @op if you haven't fixed this problem yet and don't wish to flash a custom rom, what firmware were you using?
Vatsal said:
Well, flashing a custom rom isn't the exact solution @op if you haven't fixed this problem yet and don't wish to flash a custom rom, what firmware were you using?
Click to expand...
Click to collapse
Do you mean build number?
It is : LXB22.99-24.12
MotorolaMadMan said:
Do you mean build number?
It is : LXB22.99-24.12
Click to expand...
Click to collapse
Reflash the firmware and root it again
Or simply push SystemUI.apk to system via adb and give it right permissions.
Sent from my Moto G 2014 using Tapatalk
Vatsal said:
Reflash the firmware and root it again
Or simply push SystemUI.apk to system via adb and give it right permissions.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
I can't find the systemui. Apk
MotorolaMadMan said:
I can't find the systemui. Apk
Click to expand...
Click to collapse
Reflash the firmware and root it once again
Good luck!
I flashed untouched stock lollypop in my moto x ghost...it flashed well,,but the problem is SuperSU is not installing,I tried both ways,via twrp and direct install from playstore,even not worked...without SuperSU,,phone can't be rooted...plz solve my problem..
Spiderman1992 said:
I flashed untouched stock lollypop in my moto x ghost...it flashed well,,but the problem is SuperSU is not installing,I tried both ways,via twrp and direct install from playstore,even not worked...without SuperSU,,phone can't be rooted...plz solve my problem..
Click to expand...
Click to collapse
You must have to reinstall the ROM
Do this
Go to recovery
Make full wipes
Install SuperSU
Install the rom untouched
Install SuperSU again
Wipe cache and dalvik
Reboot
So,before rom installation also,,SuperSU would must be flash??i thought only rom installation after....thanks dude...I will try
Spiderman1992 said:
So,before rom installation also,,SuperSU would must be flash??i thought only rom installation after....thanks dude...I will try
Click to expand...
Click to collapse
Yep, the SU must be installed before in that ROM, is a bug. Usually it must be installed after but in this case not.
Thank you..it worked
YedanyXD said:
Yep, the SU must be installed before in that ROM, is a bug. Usually it must be installed after but in this case not.
Click to expand...
Click to collapse
Thanks bro...it worked..
Hello! I have samsung galaxy mini 2 s6500-d . I try to install cyanogenmod 12 with cwm 6.0.3.2 . After install i reboot my phone and i seen image boot but rom cannot start . Maybe this information help?
MukMaku said:
Hello! I have samsung galaxy mini 2 s6500-d . I try to install cyanogenmod 12 with cwm 6.0.3.2 . After install i reboot my phone and i seen image boot but rom cannot start . Maybe this information help?
Click to expand...
Click to collapse
I had the same problem and was able to remedy it by rebooting to recovery and factory resetting and wiping both the cache and dalvik cache.
ShaunCB said:
I had the same problem and was able to remedy it by rebooting to recovery and factory resetting and wiping both the cache and dalvik cache.
Click to expand...
Click to collapse
Cm12 is not Working , The Latest Version is Cm11 or Omnirom Android 4.4
Shadow Of Leaf said:
Cm12 is not Working , The Latest Version is Cm11 or Omnirom Android 4.4
Click to expand...
Click to collapse
Oh yeah my mistake I was using CM11, where can I find the download for Omnirom?
ShaunCB said:
Oh yeah my mistake I was using CM11, where can I find the download for Omnirom?[/QUOTE
here you go https://forum.xda-developers.com/galaxy-mini/mini-2-dev/rom-omnirom-4-4-4-stable-mini-2-t3831882
Click to expand...
Click to collapse