Related
OMGOGOMOGMOGM SOMEONE PLEASE HELP
I just flashed the aokp rom http://forum.xda-developers.com/showthread.php?t=2250601&page=12 with safestrap recovery thing a majiger cant remember the name of it but anyway, i flashed it and when i tapped reboot it comes up with a black screen showing this format
Invalid flash mode (s)
10..9b(*) (sha-5b08bc, 2012-12-03:10:39)
eMMC info: size 8gb
Device is LOCKED, Status code: 0
Battery Low:
Transfer Mode:
USB connected
Failed to hab check for boot: 0x56
Fastboot Reason: Boot Failure
usb Connected
This is exactly whats on my screen right now and its scaring the hell out of me, SOMEONE PLEASE HELP I DID EVERY INSTRUCTION TO FLASHING THE ROM WITH THE RECOVERY IM USING AND THIS HAPPENED.
:crying ::crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying:
Face palm man. You need an unlocked bootloader for that rom says so in the info so you clearly didn't follow directions like you said to such as using cwm not safestrap. This is why we must read before acting hastily. You may be able to use rsd to flash stock but don't count on it.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Face palm man. You need an unlocked bootloader for that rom says so in the info so you clearly didn't follow directions like you said to such as using cwm not safestrap. This is why we must read before acting hastily. You may be able to use rsd to flash stock but don't count on it.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
yea i was gonna say the same i also think new people see that safestrap thread thats stickied which is why they install ss and not cmw.
Sent from my MB886 using xda premium
This might help: http://forum.xda-developers.com/showthread.php?t=2231249
deeje00 said:
Face palm man. You need an unlocked bootloader for that rom says so in the info so you clearly didn't follow directions like you said to such as using cwm not safestrap. This is why we must read before acting hastily. You may be able to use rsd to flash stock but don't count on it.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
i actually have the same problem. My phone is unlocked before already, but the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode...
do you know how i can figure this out?
legendnexus said:
i actually have the same problem. My phone is unlocked before already, but the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode...
do you know how i can figure this out?
Click to expand...
Click to collapse
Did you flash a rom using Safestrap too?
audit13 said:
Did you flash a rom using Safestrap too?
Click to expand...
Click to collapse
is it a right source to try?
http://forum.xda-developers.com/showthread.php?t=1995220
legendnexus said:
is it a right source to try?
http://forum.xda-developers.com/showthread.php?t=1995220
Click to expand...
Click to collapse
That thread is for locked bootloaders. Do you have a locked bootloader? Did you flash a rom using safestrap?
Did you try this? http://forum.xda-developers.com/showthread.php?t=2231249
Or this? http://forum.xda-developers.com/showthread.php?t=2262726
audit13 said:
That thread is for locked bootloaders. Do you have a locked bootloader? Did you flash a rom using safestrap?
Did you try this? http://forum.xda-developers.com/showthread.php?t=2231249
Or this? http://forum.xda-developers.com/showthread.php?t=2262726
Click to expand...
Click to collapse
Yeah i unlocked the bootloader before. so it seems like useless for my case. Plus i cant even boot into fastboot mode, how am i gonna install it lol
And as I said before; the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode.
I tried both methods but they both fail where the phone need to be in fastboot mode, which is apparently not happening...
legendnexus said:
Yeah i unlocked the bootloader before. so it seems like useless for my case. Plus i cant even boot into fastboot mode, how am i gonna install it lol
And as I said before; the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode.
I tried both methods but they both fail where the phone need to be in fastboot mode, which is apparently not happening...
Click to expand...
Click to collapse
Damn, seems like those are the only two methods that could work.
The good thing is that you can't re-lock the bootloader.
You might want to send a PM to skeevy to see if he can help.
Is there any warranty left on your phone? I've seen posts where people were able to go back to AT&T to exchange the phone or send it in for repair.
legendnexus said:
Yeah i unlocked the bootloader before. so it seems like useless for my case. Plus i cant even boot into fastboot mode, how am i gonna install it lol
And as I said before; the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode.
I tried both methods but they both fail where the phone need to be in fastboot mode, which is apparently not happening...
Click to expand...
Click to collapse
How have you tried to get into fastboot? Try turning your phone off, hold both volume buttons and press the power button a few times then use volume down to scroll to "ap fastboot" and use volume up to select.
Sent from my MB886 using Tapatalk
When you plug in the phone to charge do you see at least the boot logo?
may need to connect pins 1 & 4 together in micro usb charger port to phone within the plug itself and it will charge.
Swiftb12305 said:
yea i was gonna say the same i also think new people see that safestrap thread thats stickied which is why they install ss and not cmw.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
I feel like it's causing more problems than it's solving with new people that try to flash their phones, they see light at the end of the tunnel and assume it's the exit, when in fact it's a dadgum train.
legendnexus said:
Yeah i unlocked the bootloader before. so it seems like useless for my case. Plus i cant even boot into fastboot mode, how am i gonna install it lol
And as I said before; the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode.
I tried both methods but they both fail where the phone need to be in fastboot mode, which is apparently not happening...
Click to expand...
Click to collapse
Have you tried a fastboot cable?
audit13 said:
Damn, seems like those are the only two methods that could work.
The good thing is that you can't re-lock the bootloader.
You might want to send a PM to skeevy to see if he can help.
Is there any warranty left on your phone? I've seen posts where people were able to go back to AT&T to exchange the phone or send it in for repair.
Click to expand...
Click to collapse
nope no warranty left..
penser said:
How have you tried to get into fastboot? Try turning your phone off, hold both volume buttons and press the power button a few times then use volume down to scroll to "ap fastboot" and use volume up to select.
Sent from my MB886 using Tapatalk
Click to expand...
Click to collapse
exactly the same way you wrote. but unfortunately it doesnt work.
SVLAN said:
When you plug in the phone to charge do you see at least the boot logo?
Click to expand...
Click to collapse
ahahaha nothing!! no single pixel power up, forget about the logo lol
HD-man said:
may need to connect pins 1 & 4 together in micro usb charger port to phone within the plug itself and it will charge.
Click to expand...
Click to collapse
anthony2424 said:
Have you tried a fastboot cable?
Click to expand...
Click to collapse
I research on that i guess fasboot cable is connecting the pins 1 & 4 together in micro usb cable. I tried that too, however result is the same.
doesnt work.
That was my last hope (fastboot cable), so i even try other combinations connecting different pins together, but it didnt work too )))
I have a beautiful brick as you guys can understand.
I am thinking to order a broken lcd atrix hd online and replace the boards right now. Do you guys think it is logical?
or like replacing the storage with a used one.
I dont know what else to do, out of ideas
I am aware I haven't replied in a while, my atrix had a hardware issue, but I got a nexus 10!! Anyways, when plugging the phone in does the LED light up green?
Sent from my Nexus 10 using XDA Premium 4 mobile app
Nope, no lights
Sent from my Nexus 5 using Tapatalk
Hm sounds like a hardware issue, check the pins in the phones micro USB port if other cables don't make a the LED turn green while the phone is off.
Sent from my Nexus 10 using XDA Premium 4 mobile app
So hello guys im really a ****ty guy at flashing stuff so once i by mistakenly deleted the entire rom and stuff. now im stuck at ap fastboot nothing is working except barcodes whenever click something else than barcodes a brown page comes and goes back saying (failed to hab check for recovery: 0x56)
or (boot up failed) but when i use fastboot devices command on cmd my computer recognizes it.
plz help me
Specify model pls
ghostechful said:
So hello guys im really a ****ty guy at flashing stuff so once i by mistakenly deleted the entire rom and stuff. now im stuck at ap fastboot nothing is working except barcodes whenever click something else than barcodes a brown page comes and goes back saying (failed to hab check for recovery: 0x56)
or (boot up failed) but when i use fastboot devices command on cmd my computer recognizes it.
plz help me
Click to expand...
Click to collapse
It's moto x 2013 Verizon 1060
ghostechful said:
It's moto x 2013 Verizon 1060
Click to expand...
Click to collapse
Download full stock rom for moto x from google:
Xt1060 5.0 xml zip
Its your keywords, after downloading the above file.. Download rsd lite for motorola and then charge your phone atleast 50%.. If you cannot even charge and still your pc detect fastboot type this:
Fastboot reboot-bootloader
And plug the charger for 40mins.. Type again
fastboot reboot-bootloader
Then unzip the xml you have downloaded and open rsd lite locate the flashfile.xml from inside the folder connect the usb cable too pc and flash it.. Hope it will make your moto x running again.
but then im getting an error ( failed flashing process.Unknow fastboot command)
Thx alot i got my link for the download and i just had to delete a code name getvar to make it work. once again thx alot salik
ghostechful said:
Thx alot i got my link for the download and i just had to delete a code name getvar to make it work. once again thx alot salik
Click to expand...
Click to collapse
your welcome
my moto g6 have a hardbrick after OTA update i need help to fix my Moto G6 XT1925-1
lautaro319 said:
my moto g6 have a hardbrick after OTA update i need help to fix my Moto G6 XT1925-1
Click to expand...
Click to collapse
Are you able to enter fastboot mode at all?
Ragarianok said:
Are you able to enter fastboot mode at all?
Click to expand...
Click to collapse
I can enter to fastboot, does not turn on the phone, and turn on lights
lautaro319 said:
I can enter to fastboot, does not turn on the phone, and turn on lights
Click to expand...
Click to collapse
Dang. What did you do?
lautaro319 said:
I can enter to fastboot, does not turn on the phone, and turn on lights
Click to expand...
Click to collapse
Do you see the fastboot screen? Flash your firmware then.
my english is bad, i need a blankflash,
I connect the cell phone to the PC and it takes me like qualcomm
lautaro319 said:
my english is bad, i need a blankflash,
I connect the cell phone to the PC and it takes me like qualcomm
Click to expand...
Click to collapse
You did something other than OTA. It does not help to be dishonest. No blank flash that I know of.
Moto G6 brickado
Ragarianok said:
Are you able to enter fastboot mode at all?
Click to expand...
Click to collapse
voce conseguiu alguma solução para o moto g6 Brickado, nao da sinal, so pisca led branco?
naldoessff said:
voce conseguiu alguma solução para o moto g6 Brickado, nao da sinal, so pisca led branco?
Click to expand...
Click to collapse
English please.
you got some solution for the bike g6 Brick, not the signal, just flashes white led
lautaro319 said:
my english is bad, i need a blankflash,
I connect the cell phone to the PC and it takes me like qualcomm
Click to expand...
Click to collapse
I have also hardbricked my moto G6 while OTA update. There was an update and i started update without noticing battery percentage now its dead. Only life of my devoce is white light blinking when connecting to pc and detected as qualcom.
I find blank flash file in https://mirrors.lolinet.com/firmware/moto/ali/blankflash/ but it didnt worked for me. it may work for you just give it a shot.
lautaro319 said:
my english is bad, i need a blankflash,
I connect the cell phone to the PC and it takes me like qualcomm
Click to expand...
Click to collapse
Can you enter in fastboot mode pressing power + volume"-" buttons for while?
Help regarding HardUnbrick
cecogor said:
Can you enter in fastboot mode pressing power + volume"-" buttons for while?
Click to expand...
Click to collapse
Hi Friends, I have tried everything but nothing works & search google lot but couldn't find the specific blankflash file.
I know that cpu id: 154, Serial: MSM8953 however, I couldn't find the firehose which will help me work through QFIL, or blankflash.
I have tried mirrors.lolinet.com/firmware/moto/ali/blankflash but couldn't work at all, although it is the correct blankflash but validate-rdl error receive everytime I try.
It is hard bricked, I need some help if someone could. Either in terms or compressed mmcblk0 of the same moto g6 device XT1925, or blankflash or firehose that works with MSM8953 Motorola.
Thank you in advance if you have something for me.
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Well mine works as follows
Turn off device
Hold vol down and power button, this should take to recovery menu
Select recovery - it will take to a no command screen
Hit power and up once.
That's how I hard reset my g9
LTZ96285 said:
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Click to expand...
Click to collapse
Download the rescue software from the official Lenovo page, it will guide you, maybe you can recover your device, use fastboot to try to put it in mode, good luck
Your phone is bootloader bricked, try blankflashing it. It is already in EDL mode since you got the qualcomm HS Usb
Hi, mrsiri. There isn't any blank flashes available as far as I'm aware.
That's too bad. From my understanding the "Qualcomm HS-USB Loader 9008" showing up means your bootloader is corrupted. That's why you can't get into fastboot and nothing shows up on your screen. By applying a blankflash you could reflash your bootloader, but since there isn't any blankflash available yet you'll have to wait for one.
my Motorola G9 Plus has also been bricked and the only vital sign is that when I connect it to PC it shows that a usb device is connected (lsusb command execution result: Qualcomm, Inc. Gobi Wireless Modem (QDL mode) ) and nothing else appears, i.e. the phone screen is off and in black state and it enters neither recovery nor fastboot mode.
can anyone help to recover the device?!
mohammad_d said:
my Motorola G9 Plus also has been bricked and the only vital sign is that when I connect it to PC it shows that a usb device is connected (lsusb command execution result: Qualcomm, Inc. Gobi Wireless Modem (QDL mode) ) and nothing else appears, i.e. the phone screen is off and in black state and it enters neither recovery nor fastboot mode.
can anyone help to recover the device?!
Click to expand...
Click to collapse
It doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
mrsiri said:
It doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
Click to expand...
Click to collapse
Can I use it's warranty in Motorola warranty dealers and revive the device or provide any bootloader from another same device or any other way?
mohammad_d said:
Can I use it's warranty in Motorola warranty dealers and revive the device or provide any bootloader from another same device or any other way?
Click to expand...
Click to collapse
I don't know of any other method than Blankflashing that could revive your phone in this state. Your warranty was voided right after you unlocked your bootloader, so I don't think they would accept fixing it. The Problem is you can't simply reflash another bootloader, because in this state (QCOM EDL) can only be recognized and flashed with Qfil which uses the primary bootloader to flash to the secondary bootloader. This process needs the blankflash which has the files to correctly flash it. Yes the Android has another bootloader that is less user friendly to boot the other bootloader and then your ROM.
mrsiri said:
I don't know of any other method than Blankflashing that could revive your phone in this state. Your warranty was voided right after you unlocked your bootloader, so I don't think they would accept fixing it. The Problem is you can't simply reflash another bootloader, because in this state (QCOM EDL) can only be recognized and flashed with Qfil which uses the primary bootloader to flash to the secondary bootloader. This process needs the blankflash which has the files to correctly flash it. Yes the Android has another bootloader that is less user friendly to boot the other bootloader and then your ROM.
Click to expand...
Click to collapse
Hello guys hope you all are well. I have also same problem with my moto g9 plus. So do have any luck to find blank flash file for Moto g9 plus?
count me in guys...i hard bricked my device too......if anyone finds a solution should ping me here
LTZ96285 said:
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Click to expand...
Click to collapse
Yes same problem my moto g9 plus is Qualcomm edle mode please upload blank flash file
Please send blank flash file moto g9 plus Odessa xt2087-2
Yeah there is no blankflash files I have been able to get. So I just got a new device.
LTZ96285 said:
Hi, I have got a Moto G9 Plus and it seems to be bricked, the boot loader has not been unlocked or anything. When connecting to USB on a Windows PC I just get the device showing up as "Qualcomm HS-USB Loader 9008" The device just did this randomly possibly after a update.
I have tried getting into fastboot holding the volume down and power button for 2-3 mins but no luck. Sadly can't claim warranty as the device has been opened before.
Just wondered if anyone could provide me with this file or help me out as it would be great to get it working again. Model is XT2087-2
Thanks everyone
Click to expand...
Click to collapse
Same problem Motorola G9 plus Odessa hardbrick bootloader doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
Motorola G9 plus Odessa hardbrick doesn't enter fastboot because it is corrupted. You'll have to wait till someone releases a Blankflash for this devices Im afraid.
(Moto g9 plus Odessa xt2087-2)
asimali2243 said:
count me in guys...i hard bricked my device too......if anyone finds a solution should ping me here
Click to expand...
Click to collapse
Yes same i waiting for blank flash file Moto g9 plus Odessa xt2087-2 qpas 30 firmware
Not response my problem...?
?
hello guyes my phone is dead any solution
I can appreciate some help I bought a Motorola edge s pro from AliExpress with the bootloader unlocked and global rom installed and then flashed it with the current retail version rras31.q3-19-86-4 which went good until I enabled "ram boost" under system->performance followed by restarting the device but now the device won't power back on holding that button nor can I enter into fastboot/recovery modes with power+vol down shortcuts, is this device hard bricked, soft bricked with the ram boost on and bootloader unlocked?
I get the qdloader 9008 active under my ports and the led light flashing when I hold the power on a few seconds. I tested blankflash from pstar and everything completed but still no bootloader shows after I ran that process. do I need another blankflash version that matches the stock firmware on this model? anybody brick theirs turning ram boost on?
I tried this blankflash retail from lolinet blankflash_pstar_RRA31.Q3-19-50 since I can't find the latest Q3-19-86-4 retail blank flash, any input would be much appreciated. thanks
Motorola Blankflash
Request blankflash by giving device informations
t.me
kevin2025 said:
I tried this blankflash retail from lolinet blankflash_pstar_RRA31.Q3-19-50 since I can't find the latest Q3-19-86-4 retail blank flash, any input would be much appreciated. thanks
Click to expand...
Click to collapse
i can find the blankflash but no hope for my device @
I'll look into this, thank you, does the blank flash need to match the current firmware version installed?
i managed to recover the fastboot using a Motorola g100 blank flash.
blankflash_nio_retca_RRTS31.Q1-84-24-3-6
You have to run blankflash when your phone is disconected with computer. Next, you must put usb cable in. It's already worked for my Motorola 20 PRO.
kevin2025 said:
i managed to recover the fastboot using a Motorola g100 blank flash.
blankflash_nio_retca_RRTS31.Q1-84-24-3-6
Click to expand...
Click to collapse
A new version pstar_cmcc_user_12_S1RAA32.54-36_8e137-74e54_release-keys_cmcc_CN found on telegram Motorola blankflash group. It bring my phone back