Database Develop

Help Hard bricked Moto maxx

My Motorola maxx xt1225 just plug in Qualcomm HS- USB 9008 QDLoader way, as I put it in blank or fastboot flash

JCaviglia said:
My Motorola maxx xt1225 just plug in Qualcomm HS- USB 9008 QDLoader way, as I put it in blank or fastboot flash
Click to expand...
Click to collapse
Is it booting to fastboot? If u messed with the blankflash in fasatboot u are on your own unless someone can get their hands on the Moto Maxx files!

Gundabolu SC said:
Is it booting to fastboot? If u messed with the blankflash in fasatboot u are on your own unless someone can get their hands on the Moto Maxx files!
Click to expand...
Click to collapse
.
Do not connect in fastboot mode, not in recovery, only qload

JCaviglia said:
.
Do not connect in fastboot mode, not in recovery, only qload
Click to expand...
Click to collapse
Try this and dont forget to change the files as say junior-ilha on the frist reply
I did this mistake lol it cost to me 500 dilmas!!! for a new motherboard
dont forget read all, and im not resposible for anything that hapens after by the way in your situation like mine its forgetable but doesnt cost remember!!! good luck for you brother
http://forum.xda-developers.com/moto-maxx/help/ap-fastboot-flash-mode-secure-t3349369#post66159452

Mi 9 hard bricked?

I failed at flashing my mi 9 from android 10 beta back to stock after that my mi 9 won´t restart:
-no vibration
-no fastboot logo
-no recovery enter
+my pc cant detect my phone
any thoughts or ideas?

I suggest using a edl cable first if that fails I would probably go fro a refund claim if its totally unresponsive...

Knubz1337 said:
I failed at flashing my mi 9 from android 10 beta back to stock after that my mi 9 won´t restart:
-no vibration
-no fastboot logo
-no recovery enter
+my pc cant detect my phone
any thoughts or ideas?
Click to expand...
Click to collapse
Someone else had the same problem as you on here.
Edit
Here is the link
https://forum.xda-developers.com/Mi-9/help/brick-help-t3930230/page2

Knubz1337 said:
I failed at flashing my mi 9 from android 10 beta back to stock after that my mi 9 won´t restart:
-no vibration
-no fastboot logo
-no recovery enter
+my pc cant detect my phone
any thoughts or ideas?
Click to expand...
Click to collapse
Miuiflashpro maybe? I managed to find an Italain version. Good luck mate?

What did you do? How can you "fail" to flash it?

SmallTarzan said:
What did you do? How can you "fail" to flash it?
Click to expand...
Click to collapse
Error too many links

Thargorsson said:
I suggest using a edl cable first if that fails I would probably go fro a refund claim if its totally unresponsive...
Click to expand...
Click to collapse
i ordered a xiaomi edl deep flash cable. I will try it tomorrow

Did you fix it? If so, how?

Knubz1337 said:
i ordered a xiaomi edl deep flash cable. I will try it tomorrow
Click to expand...
Click to collapse
edl without authorized account won't work....

Addymore said:
edl without authorized account won't work....
Click to expand...
Click to collapse
I couldn't enter edl Mode with the cable.
I think I will send It back

Same issue here.
I did the same thing. And it hard bricked my phone. I send it back, and they change the motherboard for me.

I have the same issue. Mine is mi9se. Managed to solve?

hi, I unlocked the bootloader, did the twrp, did the root and, when installing the pixel rom, it crashed on FASTBOOT and didn't come out anymore, help me

sd brasil said:
hi, I unlocked the bootloader, did the twrp, did the root and, when installing the pixel rom, it crashed on FASTBOOT and didn't come out anymore, help me
Click to expand...
Click to collapse
You didn't flash the last firmware.zip before flashing pixel, or a full miui rom?
On pc, no sign of life in fastboot?

Oel said:
You didn't flash the last firmware.zip before flashing pixel, or a full miui rom?
On pc, no sign of life in fastboot?
Click to expand...
Click to collapse
Sim fiz tudo... Mesmo assim entrou em unbrick...
Consegui com o miflash PRO voltar a rom original

Question Motorola Edge S Pro Bricked

I can appreciate some help I bought a Motorola edge s pro from AliExpress with the bootloader unlocked and global rom installed and then flashed it with the current retail version rras31.q3-19-86-4 which went good until I enabled "ram boost" under system->performance followed by restarting the device but now the device won't power back on holding that button nor can I enter into fastboot/recovery modes with power+vol down shortcuts, is this device hard bricked, soft bricked with the ram boost on and bootloader unlocked?

I get the qdloader 9008 active under my ports and the led light flashing when I hold the power on a few seconds. I tested blankflash from pstar and everything completed but still no bootloader shows after I ran that process. do I need another blankflash version that matches the stock firmware on this model? anybody brick theirs turning ram boost on?

I tried this blankflash retail from lolinet blankflash_pstar_RRA31.Q3-19-50 since I can't find the latest Q3-19-86-4 retail blank flash, any input would be much appreciated. thanks

Motorola Blankflash
Request blankflash by giving device informations
t.me

kevin2025 said:
I tried this blankflash retail from lolinet blankflash_pstar_RRA31.Q3-19-50 since I can't find the latest Q3-19-86-4 retail blank flash, any input would be much appreciated. thanks
Click to expand...
Click to collapse
i can find the blankflash but no hope for my device @

I'll look into this, thank you, does the blank flash need to match the current firmware version installed?

i managed to recover the fastboot using a Motorola g100 blank flash.
blankflash_nio_retca_RRTS31.Q1-84-24-3-6

You have to run blankflash when your phone is disconected with computer. Next, you must put usb cable in. It's already worked for my Motorola 20 PRO.

kevin2025 said:
i managed to recover the fastboot using a Motorola g100 blank flash.
blankflash_nio_retca_RRTS31.Q1-84-24-3-6
Click to expand...
Click to collapse
A new version pstar_cmcc_user_12_S1RAA32.54-36_8e137-74e54_release-keys_cmcc_CN found on telegram Motorola blankflash group. It bring my phone back

Mi 8 hard brick

Hi there. I'm using mi 8 for a long time and I've decided to flash TWRP recovery through fastboot on mac, but something went wrong and now my phone is hard-bricked. It is displayed as Qualcomm HS-USB QDLoader 9008(COM3) on my other windows PC but I can do nothing with it. All physical buttons are not working at all. What I've already tried:
1) Flash fastboot image through Mi Flash - Failed to send a hello packet
2) Flash fastboot image through QFIL - Fail
Is there any method I've not tried to fix my phone or it's bricked completely?

I haven't tried this file but I hope it helps. No need auth firehose.

hello i can help you for 3 dollar, you can send money after fix

gangster93 said:
hello i can help you for 3 dollar, you can send money after fix
Click to expand...
Click to collapse
Puedes ayudarme?

wil3101 said:
Puedes ayudarme?
Click to expand...
Click to collapse
gangster93 said:
hello i can help you for 3 dollar, you can send money after fix
Click to expand...
Click to collapse
Please help me?

Question FIX BOOT LOOP (HEEEELP)

It all started when I decided to unroot my phone. First I backed up my data. Second, I formatted the cell phone directly through its settings. So root was removed. So far, everything was fine. The cell phone turned on normally and I did the initial settings. After that I decided to lock the bootloader again. I put the phone in bootloader mode and gave the command to block (Fasboot flashing lock). A confirmation message appeared on my cell phone and I accepted it. After that the phone was like this... Blinking at boot. I can't enter fasboot or bootloader through the buttons.
Heelp please!!
See the problem (video link)

Diguinho76 said:
It all started when I decided to unroot my phone. First I backed up my data. Second, I formatted the cell phone directly through its settings. So root was removed. So far, everything was fine. The cell phone turned on normally and I did the initial settings. After that I decided to lock the bootloader again. I put the phone in bootloader mode and gave the command to block (Fasboot flashing lock). A confirmation message appeared on my cell phone and I accepted it. After that the phone was like this... Blinking at boot. I can't enter fasboot or bootloader through the buttons.
Heelp please!!
See the problem (video link)
Click to expand...
Click to collapse
Pretty sure factory resetting the phone from the settings doesn't remove root. You root by flashing a patched boot.img but the factory reset doesn't touch the boot partition at all. So you locked the bootloader and now the phone won't boot because the boot partition is not signed by the OEM. If you can't enter bootloader mode you only have two solution.
- Flashing in EDL mode through MSM tool. However, since this phone OnePlus requires an authorized account to flash through MSM tool. You can try requesting a remote session through the official support (probably they won't do it) or find someone on telegram or somewhere else who sells tokens for MSM tool.
- Shipping the phone to OnePlus for repair or going to a local repair center of your choice.

Did you complete unninstalled magisk or just have formatted?

TheNewHEROBRINE said:
Pretty sure factory resetting the phone from the settings doesn't remove root. You root by flashing a patched boot.img but the factory reset doesn't touch the boot partition at all. So you locked the bootloader and now the phone won't boot because the boot partition is not signed by the OEM. If you can't enter bootloader mode you only have two solution.
- Flashing in EDL mode through MSM tool. However, since this phone OnePlus requires an authorized account to flash through MSM tool. You can try requesting a remote session through the official support (probably they won't do it) or find someone on telegram or somewhere else who sells tokens for MSM tool.
- Shipping the phone to OnePlus for repair or going to a local repair center of your choice.
Click to expand...
Click to collapse
I can't believe I did this... All I wanted was to remove root and I forgot to do it through magisk. I just ****ed myself

Diguinho76 said:
I can't believe I did this... All I wanted was to remove root and I forgot to do it through magisk. I just ****ed myself
Click to expand...
Click to collapse
Just to confirm, holding vol + and vol - together at boot doesn't do anything?

Machad3x said:
Did you complete unninstalled magisk or just have formatted?
Click to expand...
Click to collapse
No.... just formatted
TheNewHEROBRINE said:
Just to confirm, holding vol + and vol - together at boot doesn't do anything?
Click to expand...
Click to collapse
Nop. nothing

Diguinho76 said:
Nop. nothing
Click to expand...
Click to collapse
I just remembered that with this phone you can't boot into EDL mode by holding the volume buttons like in the old days. To get into EDL mode you would need to disassemble the phone and short two pins and I immagine you don't want to do that at all. There are some special cables that can boot Qualcomm phones into EDL, although I don't know if they work with the OP10 Pro specifically.
I think your best option at the moment is to send it for repair to OnePlus or to whichever repair center you prefer.

Diguinho76 said:
No.... just formatted
Nop. nothing
Click to expand...
Click to collapse
When you can not boot to booloader (fastboot) or fastbootd you need a Services Center (for flash over edl with msm tool )

I got it. Payed 15$ and a guy from vietnam solved the problem for me.
FIXED!!! Flashed over edl.

Diguinho76 said:
I got it. Payed 15$ and a guy from vietnam solved the problem for me.
FIXED!!! Flashed over edl.
Click to expand...
Click to collapse
How did you put the phone into EDL?

TheNewHEROBRINE said:
How did you put the phone into EDL?
Click to expand...
Click to collapse
Vol+ Vol- Power Button ( All of them at the same time) plugged on the pc

Diguinho76 said:
Vol+ Vol- Power Button ( All of them at the same time) plugged on the pc
Click to expand...
Click to collapse
ah so it still works! I thought it wouldn't.

TheNewHEROBRINE said:
ah so it still works! I thought it wouldn't.
Click to expand...
Click to collapse
But now im trying to go to 2213... I flashed a 2213 payload.bin from fastboot enhance and its not booting the system. I can acess bootloader. Do you have any suggestion to change the region from bootloader now ?

Diguinho76 said:
But now im trying to go to 2213... I flashed a 2213 payload.bin from fastboot enhance and its not booting the system. I can acess bootloader. Do you have any suggestion to change the region from bootloader now ?
Click to expand...
Click to collapse
I would have installed the update through the settings. I don't think switching slot can help this time. The only thing I think you can do is extract the payload.bin with payload-dumper-go and flash the partitions manually through fastboot but this procedure doesn't have a 100% success rate. If you write me the partitions you extracted from the payload.bin I can write you the commands to do as I'm not used to the partition layout of the 10 Pro specifically.

TheNewHEROBRINE said:
Eu teria instalado a atualização através das configurações. Eu não acho que mudar de slot pode ajudar desta vez. A única coisa que acho que você pode fazer é extrair o payload.bin com payload-dumper-go e atualizar as partições manualmente por meio do fastboot, mas esse procedimento não tem uma taxa de sucesso de 100%. Se você me escrever as partições extraídas do payload.bin, posso escrever os comandos a serem feitos, pois não estou acostumado com o layout da partição do 10 Pro especificamente.
Click to expand...
Click to collapse
Ok. Ill try. But do you know any way to do this using fastboot enhance ?

Diguinho76 said:
Ok. Ill try. But do you know any way to do this using fastboot enhance ?
Click to expand...
Click to collapse
When you flashed the payload.bin in fastboot enhance were you in fastbootd or bootloader mode?

TheNewHEROBRINE said:
When you flashed the payload.bin in fastboot enhance were you in fastbootd or bootloader mode?
Click to expand...
Click to collapse
fastbootd

Diguinho76 said:
fastbootd
Click to expand...
Click to collapse
I don't know why it has failed then. Can you still boot to fastbootd? Or does it say something like userspace not bootable?

TheNewHEROBRINE said:
I don't know why it has failed then. Can you still boot to fastbootd? Or does it say something like userspace not bootable?
Click to expand...
Click to collapse
Yes, i can. I tried to flash the payload again but havent success

Diguinho76 said:
Yes, i can. I tried to flash the payload again but havent success
Click to expand...
Click to collapse
In the fastboot mode the touch is not working. so i cant format data etc. Only buttons working