Related
Heyho!
I searched almost the whole day & web to find a solution for my problem, and you are my last instance.
My 1 day old Xperia T got into a Boot-Loop, and only the Sony-Logo shows up after starting the phone.
Previous procedure:
I installed the Sony PC Companion 2.1 and updated to 7.0.A.3.195, after this the phone went into the loop.
Now i can't flash any other software because USB-Debugging is off, and i didn't root the phone yet.
I tried to flash back to LT30p_7.0.A.1.303_Generic DE (found it here) but without Debugging = no flash.
Do you have any idea how i can flash or use any other FW without Debugging or Root?
Flashmode and Fastboot mode work in Xperia Flasher!
If you can stand loosing your data you could try a factory reset via recovery.
Info on how to access recovery menu is in the all-in-one thread.
If I helped, hit Thanks!
VaterFrost24 said:
Heyho!
I searched almost the whole day & web to find a solution for my problem, and you are my last instance.
My 1 day old Xperia T got into a Boot-Loop, and only the Sony-Logo shows up after starting the phone.
Previous procedure:
I installed the Sony PC Companion 2.1 and updated to 7.0.A.3.195, after this the phone went into the loop.
Now i can't flash any other software because USB-Debugging is off, and i didn't root the phone yet.
I tried to flash back to LT30p_7.0.A.1.303_Generic DE (found it here) but without Debugging = no flash.
Do you have any idea how i can flash or use any other FW without Debugging or Root?
Flashmode and Fastboot mode work in Xperia Flasher!
Click to expand...
Click to collapse
If you tried this via the official PCCompanion you could always take it back to the shop.
But i do suggest the following
1) Uninstalling pccomapnion
2) Redownload and install PCCompanion
3) Repair phone via PCComapnion. (You do not need USB debbuging for this)
emuX said:
If you can stand loosing your data you could try a factory reset via recovery.
Info on how to access recovery menu is in the all-in-one thread.
If I helped, hit Thanks!
Click to expand...
Click to collapse
I can't even enter Recovery because it immediately restarts after the Sony Logo!
gregbradley said:
If you tried this via the official PCCOmpanion you could always take it back to the shop.
But i do suggest the following
1) Uninstalling pccomapnion
2) Redownload and install PCCompanion
3) Repair phone via PCComapnion. (You do not need USB debbuging for this)
Click to expand...
Click to collapse
The PCCompanion doesn't even recognize the phone because it always restarts. There are only 2 modes: loop or off.
I will return this brick to the shop, thank you for the proposals!
VaterFrost24 said:
I can't even enter Recovery because it immediately restarts after the Sony Logo!
Click to expand...
Click to collapse
You cant enter recovery if you have not unlocked the bootloader, rooted and installed Recovery
The PCCompanion doesn't even recognize the phone because it always restarts. There are only 2 modes: loop or off.
I will return this brick to the shop, thank you for the proposals!
Click to expand...
Click to collapse
Your phone needs to be turned off for PCCompanion to flash it....Just go through the steps to update software and choose repair
gregbradley said:
Your phone needs to be turned off for PCCompanion to flash it....Just go through the steps to update software and choose repair
Click to expand...
Click to collapse
I know what you mean, but when i plug in the USB-cable, the phone automatically turns on.
The menu is like this: SEARCH -> CONNECT (i plug in the cable) -> RECOGNITION -> at this point the phone is on for a few seconds
but it turns off and aborts the update!
This error appears: "PC Companion could not connect to the phone... please read the document troubleshooting".
But no point in this document helps me. There are only proposals like:
-use another USB port
- turn the phone off and on again
- Use another USB-cable
Seems like Sony bricked it with it's own software
Take it back to the shop then
Sent from the future on my Star Trek communicator.
Sent from my LT30p using XDA premium.
Did you try :
while device is power ON
Volume Up + POWER (for 10 seconds) -> resets the battery, its like removing the battery and putting it back in [device will vibrate once]
Volume Up + POWER (for additional 5 seconds, total 15 seconds) -> will power off hard, device will power down [device will vibrate thrice]
Click to expand...
Click to collapse
Maybe nothing will happend but it cost nothing to try...
babylonbwoy said:
Maybe nothing will happend but it cost nothing to try...
Click to expand...
Click to collapse
Thanks for the description! While trying things out i noticed the vibration signal but didnt know what it means.
Nothing happened
VaterFrost24 said:
I can't even enter Recovery because it immediately restarts after the Sony Logo!
Click to expand...
Click to collapse
You don't have to. You have to put the device in fastboot or flashmode which you reach by holding either vol-up or vol-down BEFORE respectively WHILE hooking the phone up to your pc.
But as greg said, undplug and completely power off your device and put it aside. Then start PC Companion and chose repair. PC Companion will then guide you through the steps necessary to get your phone to a state where it can be reflashed.
because it always restarts. There are only 2 modes: loop or off.
Click to expand...
Click to collapse
Not true, it does not restart by itself in either flashmode nor fastboot mode
As pointed out above, theres fastboot mode and flashmode which bypass the failing OS bootup
I will return this brick to the shop, thank you for the proposals!
Click to expand...
Click to collapse
You obviously have no clue what a brick is. You have a bootlooping device which is nowhere near a brick. But that's probably a detail you're not interested in.
Try to follow the steps above to repair (=basically a full on, clean reflash in Sony vocabulary) your phone and get rid of the bootloop.
Hi guys.
first ever post in here!(because nearly all of the time i've found an answer here!! cheers!)
i've had exactly the same problem and been looking all over for a solution as i also have the boot loop problem occurring. tried the repair options in pc companion and also SUS. if i'm right the battery has to be above 50% to update and i'm pretty sure it's drained. i remember when flashing my htc one x when that was stuck in bootloop with low battery that to get enough battery I made a battery loop batch file which charged the device. however this was in fastboot mode and i don't think i have that option on my Xperia T. is there any way to charge the battery so as to attempt another repair?
Thanks in advance!
mani234 said:
Hi guys.
first ever post in here!(because nearly all of the time i've found an answer here!! cheers!)
i've had exactly the same problem and been looking all over for a solution as i also have the boot loop problem occurring. tried the repair options in pc companion and also SUS. if i'm right the battery has to be above 50% to update and i'm pretty sure it's drained. i remember when flashing my htc one x when that was stuck in bootloop with low battery that to get enough battery I made a battery loop batch file which charged the device. however this was in fastboot mode and i don't think i have that option on my Xperia T. is there any way to charge the battery so as to attempt another repair?
Thanks in advance!
Click to expand...
Click to collapse
Just leave it plugged in. But i have used pccompanion when the battery has been as low as 10%.
I think you could try a hard reset. (Volume up and power button for 5-8 seconds, and then keep it pressed for a further20 seconds, untill it vibrates several times) Then try flashing a stock .303 file from the all in one thread via flashtool
gregbradley said:
Just leave it plugged in. But i have used pccompanion when the battery has been as low as 10%.
I think you could try a hard reset. (Volume up and power button for 5-8 seconds, and then keep it pressed for a further20 seconds, untill it vibrates several times) Then try flashing a stock .303 file from the all in one thread via flashtool
Click to expand...
Click to collapse
leaving it plugged in just continues bootloop. sorry should have mentioned i've tried hard reset. i did try flashtool (0.9.9.0 version?) but it was not picking up the device.
cheers
mani234 said:
leaving it plugged in just continues bootloop. sorry should have mentioned i've tried hard reset. i did try flashtool (0.9.9.0 version?) but it was not picking up the device.
cheers
Click to expand...
Click to collapse
leave the device turned off....then attach usb with volume down button...send a screen shot of what flashtool says when you do that.
gregbradley said:
leave the device turned off....then attach usb with volume down button...send a screen shot of what flashtool says when you do that.
Click to expand...
Click to collapse
got this when i connected with vol- held down
regards
mani234 said:
got this when i connected with vol- held down
regards
Click to expand...
Click to collapse
why are you flashing an x10 relock bootloader ftf?
Choose an xperia T stock generic ftf from the all in one thread and place that in the firmware folder of flashtools and choose that when you hit the flash button
gregbradley said:
why are you flashing an x10 relock bootloader ftf?
Choose an xperia T stock generic ftf from the all in one thread and place that in the firmware folder of flashtools and choose that when you hit the flash button
Click to expand...
Click to collapse
yes, realised this after i sent you the screenshot my bad. thought the flashtool would've already had ftf's pre-loaded so to speak. will give this a bash once it finishes downloading!
regards
mani234 said:
yes, realised this after i sent you the screenshot my bad. thought the flashtool would've already had ftf's pre-loaded so to speak. will give this a bash once it finishes downloading!
regards
Click to expand...
Click to collapse
tried the flashtool with the relevant ftf file but after an initial connection phase it kept bootlooping back out of 'connected mode'. however i left i (trial and error) and it did start to flash the ftf but initially it stopped around 40% then re-bootlooped. i messed around with vol- connection to usb and power plus vol+ shutdown method (which incidentally did not vibrate) serval times left it plugged in and each time it started but stopped flashing around 92-94% complete. having got frustrated i just thought what the hell and left it to attempt to charge overnight (i say attempt as this method never seemed to charge the device once i had this problem). Anyways i must've done something right (or not!:silly as i tried it again but today there must've been some charge applied as it flashed on the second attempt i tried (the first resulted in another aborted flash) it flashed my T no problem!:good:
thank you guys!:laugh:
Glad it worked out for you.
But you activated USB-Debugging before your phone started looping right?
Sent from my LT30p using xda app-developers app
After searching around I couldn't find anything related so here's my problem.
After succesfully unlocking the bootloader of my Xperia Z it continues to work fine.
It prompted the initial startup screen (enter language, account info ect.)
I turned my device off and on... this is where the problem starts..
This is what i get
Sony brand logo>
Xperia brand logo>
5 repeated cloud animation of xperia logo and at the last one it stalls, Phone reboot and back to 0.
This goes on repeatedly until a hard poweroff or complete discharge ( I suppose)
So I know im kinda screwed, is relocking the bootloader any option? Contacting Sony atm for some sort of software replacement/flash anything..
Cheers, Geert
Try the safe mode,keep pressing vol down with power until the phone boot completely.
If the phone boot to safe mode than do a factory reset.
Sent from my C6602 using xda premium
GeertNool said:
After searching around I couldn't find anything related so here's my problem.
After succesfully unlocking the bootloader of my Xperia Z it continues to work fine.
It prompted the initial startup screen (enter language, account info ect.)
I turned my device off and on... this is where the problem starts..
This is what i get
Sony brand logo>
Xperia brand logo>
5 repeated cloud animation of xperia logo and at the last one it stalls, Phone reboot and back to 0.
This goes on repeatedly until a hard poweroff or complete discharge ( I suppose)
So I know im kinda screwed, is relocking the bootloader any option? Contacting Sony atm for some sort of software replacement/flash anything..
Cheers, Geert
Click to expand...
Click to collapse
Welcome to XDA
you should go to the recovery thread in my signature. Read the first 2 posts.
Hope you recover your phone.
Hi everyone !
I have the same problem as GeertNool. My Xperia is stuck in the same loop. I have tried everything.
- Flashboot : stuck at 0% when i try to flash
- Pc Companion and SEUS = dead ends
- Safe mode : cant make it work
I read the recovery thread. It seems that the Kernel is malfunctioning but i dont understand what should be my next move. Am i supposed to let the phone reboot endlessly untill eventually the battery dies ?
Thanks a lot for your precious answers.
Alex
al3xwhite said:
Hi everyone !
I have the same problem as GeertNool. My Xperia is stuck in the same loop. I have tried everything.
- Flashboot : stuck at 0% when i try to flash
- Pc Companion and SEUS = dead ends
- Safe mode : cant make it work
I read the recovery thread. It seems that the Kernel is malfunctioning but i dont understand what should be my next move. Am i supposed to let the phone reboot endlessly untill eventually the battery dies ?
Thanks a lot for your precious answers.
Alex
Click to expand...
Click to collapse
Yes.
When the battery dies the phone should reset itself.
After the loops end plug into a charger, not pc for now.
You should get a red led indicating low battery level charging is working.
After the red led you may get Sony boot screen or bootloops.
If you get Sony and then the charging battery icon, then charge to over 50%. Then use pc companion or flashtool to restore.
If you get bootloops then read my 2nd post from the recovery thread in my signature for bootloop tricks.
Please let me know if it works. I am looking to add the Xperia Z to my recovery guide.
If there are any questions about my guide please ask in that thread.
Thanks
From Jaramie's LT28at
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
after flashing rom my xperia is booting until the lock screen appears then it resets. what should i do? thanks
vaud27 said:
after flashing rom my xperia is booting until the lock screen appears then it resets. what should i do? thanks
Click to expand...
Click to collapse
Did you flash it with flashtool?
Did you enabled "Wipe: Data, Cache, Appslog.?
Sent from my C6602 using xda premium
gm007 said:
Did you flash it with flashtool?
Did you enabled "Wipe: Data, Cache, Appslog.?
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
i use cwm to flash it. i wipe everything. after flashing the recovery disappear and my xperia keeps on rebooting after reaching the lock screen.
can i reflash it using flashtool even my usb debugging is off?
vaud27 said:
i use cwm to flash it. i wipe everything. after flashing the recovery disappear and my xperia keeps on rebooting after reaching the lock screen.
can i reflash it using flashtool even my usb debugging is off?
Click to expand...
Click to collapse
Something wrong with the rom you are trying to install.
Yes you can use flashtool even if usb debugging is off.
Check schaggo post up^^^^
Sent from my C6602 using xda premium
gm007 said:
Something wrong with the rom you are trying to install.
Yes you can use flashtool even if usb debugging is off.
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
i will try to flash it using flashtool. thanks for your help mate
had the same problem and i managed to fix it just showing sony sign by installing the sony update programme on the sony update website
all you do is put phone into flashboot mode.
on mine i had to hold up and power button untill it vibrates 3 times then press down volume button to get it into flashboot mode
takes a few atempts but it worked.
takes around 20 mins to download then install another 10.
i couldnt get flashtool to flash firmware as my phone is locked on 3 mobile firmware locked bootloader
i hope this helps you
update:
schaggo method works. i can breath now. thanks to @gm007
This worked great for unbricking mine !!
P.S. don't waste time for Sony's Emma flash, they do not send login credentials in real time, site says they do manual user validation ...
schaggo said:
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
Click to expand...
Click to collapse
AW: [Q] Xperia Z possible brick
racht said:
...don't waste time for Sony's Emma flash, they do not send login credentials in real time...
Click to expand...
Click to collapse
They never will. Read the instructions which come with EMMA. I have it working fine, officially, without any credentials.
flashtool not flash the phone
schaggo said:
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
Click to expand...
Click to collapse
I have the same issue here, the phone suddenly dead. Charge it using AC adaptor and wall socket and the red led flashs for about 2 hours, the orange LED never turns on. Try your advice and got this:
1) Vol up + Power not work (no vibration, nothing)
2) Flash with flashtool 0.9.10.2 beta6 with no lucky, indicated "device disconnected" after animation gone.
3) regress to flashtool 0.9.10.1, device connected and then stuck at "flashing data.....", the progress bar stay at 0% and then nothing.
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
[email protected] said:
I have the same issue here, the phone suddenly dead. Charge it using AC adaptor and wall socket and the red led flashs for about 2 hours, the orange LED never turns on. Try your advice and got this:
1) Vol up + Power not work (no vibration, nothing)
2) Flash with flashtool 0.9.10.2 beta6 with no lucky, indicated "device disconnected" after animation gone.
3) regress to flashtool 0.9.10.1, device connected and then stuck at "flashing data.....", the progress bar stay at 0% and then nothing.
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
Click to expand...
Click to collapse
Try sony update service or remove flashtool and install again and use another firmware(maybe the first one is corrupted).
Sent from my C6603 using xda premium
[email protected] said:
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
Click to expand...
Click to collapse
It probably means your battery was low.
From my Xperia LT28at ION
gm007 said:
Try sony update service or remove flashtool and install again and use another firmware(maybe the first one is corrupted).
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Thanks for response. Finally flashtool 0.9.10.1b works for me!
Returning to stock
Hey guys,
I've flashed [ROM][JB 4.2.2][CM10.1][AOKP-MR1][PananoidAndroid 3.15] PAC v22.1.1 - Update: 0508 from http://forum.xda-developers.com/showthread.php?t=2208249&page=65. It's working, but I'd like to try another ROM, specifically Xperia Z Revolution™ from http://forum.xda-developers.com/showthread.php?t=2175903. This requires to install stock 10.1.A.1.434 firstly So I downloaded C6603_10.1.A.1.434_Generic DE, NL, world. Flashing with Flashtools 0.9.10.1 always stucks at 0%.
BL unlocked. Does anyone have any idea how to get stock 434 in the phone? Originally there were older one 10.1.A.1.340, if it's somehow important to know...
I have tried to upgrade firmware to 284, first it failed, then i reflash to 257, but the handheld can't be charge in off mode. When the charger plug in to the port, the handheld restart by itself until the home screen. Now i have succed upgrade to 284, but still there the problem. Any body know how to fix it??
mbah_man said:
I have tried to upgrade firmware to 284, first it failed, then i reflash to 257, but the handheld can't be charge in off mode. When the charger plug in to the port, the handheld restart by itself until the home screen. Now i have succed upgrade to 284, but still there the problem. Any body know how to fix it??
Click to expand...
Click to collapse
Copy that even m facing the same issue....
I'm on bootloader locked and rooted C5302 device on .284 firmware....I installed chainfire3d and the phone rebooted and went into boot loop....i was not able to turn off the phone and m not able to put the phone in flash mode to re flash the ROM.......i even tried the off button in the back but the phone is not turning off....after i press the off button the screen goes black and the phone restarts and the boot loop continues.....aftre complete battery drain and charging the phone finally got the phone working after repairing it with PC companion however now when i switch off the phone and charge the phone automatically turns itself on.....any help on this....
puneethv said:
Copy that even m facing the same issue....
I'm on bootloader locked and rooted C5302 device on .284 firmware....I installed chainfire3d and the phone rebooted and went into boot loop....i was not able to turn off the phone and m not able to put the phone in flash mode to re flash the ROM.......i even tried the off button in the back but the phone is not turning off....after i press the off button the screen goes black and the phone restarts and the boot loop continues.....aftre complete battery drain and charging the phone finally got the phone working after repairing it with PC companion however now when i switch off the phone and charge the phone automatically turns itself on.....any help on this....
Click to expand...
Click to collapse
i have fix my handheld, i reflashed it to 257 first, checked all wipe option, after that flashed again to 284 and checked all wipe option and exclude baseband, after finished it, it worked..
good
good
I tried to update to jelly bean via the pc companion but the usb connection was interrupted.
1stly it connected in flashmode but didn't want to flash in flashtool,it was giving me errors like these:
ERROR - 31 : A device attached to the system is not functioning.
or Error in processHeader : 22 : The device does not recognise the command.
NOW when I press the power button for a little bit i get a couple of red blinking lights..
Everything is installed all the drivers,flashtool,pc companion,update service..
Only flashtool detects the phone.
Emma detects it too but it says that it's locked.
Help me pleasee..
C'mon guyyys please help me.
I can't even manage to charge it..
Try update service
Sent from my LT30p using xda app-developers app
FaiselW said:
Try update service
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
Update service is not detecting the phone..
P.s it detected it but the update is not starting..
Follow this guild and reconect your Xperia T to PC :good:
http://plugable.com/2012/12/01/windows-8-and-intel-usb-3-0-host-controllers
th0ngpham said:
Follow this guild and reconect your Xperia T to PC :good:
http://plugable.com/2012/12/01/windows-8-and-intel-usb-3-0-host-controllers
Click to expand...
Click to collapse
I cant manage to install it..
I dont get Intel(R) USB 3.0 eXtensible Host Controller under Universal Serial Bus controllers in Device Manager.
Restart the PC.
Reset the phone with: Hold power button with button vol + simultaneously for 15 sec. or more, to 3 vibrates
Uninstall flashtool and install it again.
Install again the flashtool drivers.
Try again flash another ftf file to your fone.
Reinstall SEUS and try again repair the phone.
Or see this thread....
http://forum.xda-developers.com/showthread.php?t=2116916
Now it's flashing till the 65-70% and the red led appears and the phone disconnects from the pc..
And the phone turns on till the sony logo then reboot loop...
really want to help you my friend!!
Do you have custom recovery (clockworkmod recovery)??
SOLVED!!!
I managed to flash it via flashtool and then update via update service..
The battery was 3% charged when it turned on..
joansm said:
SOLVED!!!
I managed to flash it via flashtool and then update via update service..
The battery was 3% charged when it turned on..
Click to expand...
Click to collapse
I think this will help me:good:
jianhui wei said:
i think this will help me:good:
Click to expand...
Click to collapse
i m facing exactly the same issue
please give me a tutorial
Xperia T dead
Hi, I have LT30p( Xperia T ) and it's dead right now.
I tried everything but it's not turning on.
No fastboot, no flashmode just the red light blinks 2 times when i hold the power button.
Unlocked bootloader,CM 10.2( 4.3.1 )
Can You Help ME PLZ?
Sorry if in the wrong place But i looked for the whole forum
alini_cs said:
Hi, I have LT30p( Xperia T ) and it's dead right now.
I tried everything but it's not turning on.
No fastboot, no flashmode just the red light blinks 2 times when i hold the power button.
Unlocked bootloader,CM 10.2( 4.3.1 )
Can You Help ME PLZ?
Sorry if in the wrong place But i looked for the whole forum
Click to expand...
Click to collapse
Connect to wall charger and hold power+vol up.
hhamzah49 said:
Connect to wall charger and hold power+vol up.
Click to expand...
Click to collapse
When it died it was 71% charged and i put it to Wall Charger For 2 Days.
It's been 4 days of this death.
joansm said:
SOLVED!!!
I managed to flash it via flashtool and then update via update service..
The battery was 3% charged when it turned on..
Click to expand...
Click to collapse
How did you flash it? On mine at certain time the green led became red and disconnect.
isko95 said:
How did you flash it? On mine at certain time the green led became red and disconnect.
Click to expand...
Click to collapse
Same problem on tx pls help
green led appear & after 30 sec red and disconnect
Edit: Problem Solved
i charged my battery via auto charger now ok
Drockk_Xm said:
Same problem on tx pls help
green led appear & after 30 sec red and disconnect
Edit: Problem Solved
i charged my battery via auto charger now ok
Click to expand...
Click to collapse
My tx is dead, no respond to hard reset or to anything else..now i charge it with wall charger with rubber band pressing the power button. Till now there is no respond, it has been several hours since i plug in the charger..how long did wait your tx to turn on using auto charger?
Sent from my GT-S5360 using xda app-developers app
mizan132 said:
My tx is dead, no respond to hard reset or to anything else..now i charge it with wall charger with rubber band pressing the power button. Till now there is no respond, it has been several hours since i plug in the charger..how long did wait your tx to turn on using auto charger?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
wall charger wont work :/
removed the battery from tx then charge it via auto battery charger or other device
joansm said:
SOLVED!!!
I managed to flash it via flashtool and then update via update service..
The battery was 3% charged when it turned on..
Click to expand...
Click to collapse
hi mate! i have your same problem. how did you repair it? please help me i have this problem for almost 2 weeks still not solved. hope you reply
Hi guys, i had my Z3+ on stock lollipop, no root or bootloader unlocked whatsoever, received the ota for 6.0, on the reboot it never came back to life...:crying:
It won´t boot, won´t charge, looks like it´s completely dead, i´ve tried vol up+power, vol down+power and nothing worked, the lcd is always off, no lights or notification led whatsoever.
The only thing that it does is when connecting to PC it appears as "qhsusb_bulk" on the drivers list, even on flashtool logs says connected but it can´t flash because it won´t change to flash mode.
My Z3+ is no longer on warranty...
So guys, do you think it´s dead?
psycho46 said:
Hi guys, i had my Z3+ on stock lollipop, no root or bootloader unlocked whatsoever, received the ota for 6.0, on the reboot it never came back to life...:crying:
It won´t boot, won´t charge, looks like it´s completely dead, i´ve tried vol up+power, vol down+power and nothing worked, the lcd is always off, no lights or notification led whatsoever.
The only thing that it does is when connecting to PC it appears as "qhsusb_bulk" on the drivers list, even on flashtool logs says connected but it can´t flash because it won´t change to flash mode.
My Z3+ is no longer on warranty...
So guys, do you think it´s dead?
Click to expand...
Click to collapse
Try This method: http://xperiafirmware.com/8-firmware/108-sony-xperia-z3-e6553
[email protected] said:
Try This method: http://xperiafirmware.com/8-firmware/108-sony-xperia-z3-e6553
Click to expand...
Click to collapse
Thanks but it did not work either.
I buy your Z3+ 20€ shipping in