[Q] Samsung Captivate i897 Hangs at boot. - Captivate Q&A, Help & Troubleshooting

Hi, Ive followed every idea I could find, nothing is working.
new win7, samsung drivers, adb, .net, and java installed.
I use old ODIN to flash kk4 stock pit, kernel and firmware to it, flashes fine but hangs at end of kernel boot.
Only 1 kk4 heimdall one click detects and flashes, but hangs as well.
new odin doesnt work, but early 3.0 does.
no other 1 clicks detect it, even tho win7 shows composite/model drivers loaded.
I think its at 2.3.5 now, Id like the first rom for this phone, but havent found 2.1 anywhere.
Kies, full or mini says unsupported. but only after it goofs up the drivers.
Ive got a 10 GB folder of files for this phone, but everything Ive tried dun work.
Any ideas or questions?

updates and questions
Can I flash a new recovery menu to it? ie like holding volume up instead of down or both and get the text menu to let me flash a rom from an sd card?
Ive got tons of clockwork CW modded kernels, and have tried some and booting after with key holds of various types.
Corn Kernal flashes and seems to load fine, when I do volume up + power it brings up modem usb upload menu text, anyone know of any stable kernels for i897 that have text recovery menus that will allow reflash?
toronto rom flashes fine, gets rid of at&t boot screen, but comes up i896, which I understand is almost exact?
Ive sat and waited hours for it to reboot after flashing, I tried turning off auto reboot, using various pit files, rom files, one clicks, tars, mdns, etc. etc. in various combinations.
its possible there are errors in some of the files Im getting, but mdn checks out ok..

Teletech said:
Can I flash a new recovery menu to it? ie like holding volume up instead of down or both and get the text menu to let me flash a rom from an sd card?
Ive got tons of clockwork CW modded kernels, and have tried some and booting after with key holds of various types.
Corn Kernal flashes and seems to load fine, when I do volume up + power it brings up modem usb upload menu text, anyone know of any stable kernels for i897 that have text recovery menus that will allow reflash?
toronto rom flashes fine, gets rid of at&t boot screen, but comes up i896, which I understand is almost exact?
Ive sat and waited hours for it to reboot after flashing, I tried turning off auto reboot, using various pit files, rom files, one clicks, tars, mdns, etc. etc. in various combinations.
its possible there are errors in some of the files Im getting, but mdn checks out ok..
Click to expand...
Click to collapse
Have you tried this? http://forum.xda-developers.com/showthread.php?t=1350266
You can choose the ROM you wanna flash at the end but the base is there.

odin method.
BWolf56 said:
Have you tried this? http://forum.xda-developers.com/showthread.php?t=1350266
You can choose the ROM you wanna flash at the end but the base is there.
Click to expand...
Click to collapse
1. From off, held vol -/+ and plugged in and got downloading...
2. Started Odin 3.0 early, got blue com 3
3. I got to booting into recovery, held 3 button for 4-5 seconds, keeps booting past recovery.
4. Holding any combo of buttons doesnt work, except download mode.
5. Boots past at-t screen to i897 and hangs, if I touch the home button row, they all light up and stay lit.
6. Repeated Odin method twice just to make sure. Same hanging, Going to try the heimdall method now.

heimdall not there?
Speedload isnt listed on that teams site.
found this one click there along with others, ran and detects and flashes fine, but no recovery menu still.
Captivate-GingerbreadBootloaders-TalonDEVkernel-One-Click - Gets to talon load screen and hangs, only download works.
tried speedmod-kernel-i897-k13e-500hz, same hang after kernel.
talon and speedmod loads kernel and hangs, no recovery menu shows after key hold.
Thought it might be vol +, held just vol - and got plugged in, got battery charging screen but not moving.
Download still comes up fine, no other key holds work.

first try...
Captivate-GingerbreadBootloaders-TalonDEVkernel-One-Click - results......
Package is ready for your device.
Operating System: Windows
Found Heimdall Version: v1.3.1
Connect your device in Download Mode to procede.
Ready for flash.Repartition was requested but bootloaders are not to be flashed.
Omiting Bootloaders.
KERNEL
Heimdall v1.3.1, Copyright (c) 2010-2011, Benjamin Dobell, Glass Echidna
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Checking if protocol is initialised...
Protocol is not initialised.
Initialising protocol...
Handshaking with Loke...
Beginning session...
Session begun with device of type: 0
Downloading device's PIT file...
PIT file download sucessful
Uploading KERNEL
KERNEL upload successful
Ending session...
Rebooting device...
Device not connected.

second try....
Samsung-Captivate-Gingerbread-Bootloaders-One-Click - same result...
Odin doesnt detect download mode anymore since heimdall driver install...

Teletech said:
Samsung-Captivate-Gingerbread-Bootloaders-One-Click - same result...
Odin doesnt detect download mode anymore since heimdall driver install...
Click to expand...
Click to collapse
Use another USB port for Odin. Heimdall installs its own drivers to the USB port you use it on.
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
Teletech said:
1. From off, held vol -/+ and plugged in and got downloading...
2. Started Odin 3.0 early, got blue com 3
3. I got to booting into recovery, held 3 button for 4-5 seconds, keeps booting past recovery.
4. Holding any combo of buttons doesnt work, except download mode.
5. Boots past at-t screen to i897 and hangs, if I touch the home button row, they all light up and stay lit.
6. Repeated Odin method twice just to make sure. Same hanging, Going to try the heimdall method now.
Click to expand...
Click to collapse
Recovery is Power + home + vol up.

talon
Tried talon one click - still boots past recovery with vol + and hold and power. Home button is glass touch and not bubble dome. I tried every combo of vol + and glass touch below and power.
going to go back through and try a number of files now and your recovery button combo and see if anything lights up...brb

arggg!!
flashing - I896UXJI2 TORONTO rom to captivate i897 - 1101 using...
Samsung USB cable
Captivate i897 - 1101
Windows 7
Android SDK
SAMSUNG_USB_Driver_for_Mobile_Phones - 5/4/2011
I896UXJI2 TORONTO rom
Odin 3.07
java
.net
**************************
ODIN output...
**************************
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.rfs
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> zImage
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.rfs
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> dbdata.rfs
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> param.lfs
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
Am I doing this right? I load toronto in PDA, com ports and drivers all fine.
Click start, wait, it reboots, then stops at Galaxy screen after passing at-t white screen.
Ive left it plugged in and waited, and I've pulled the usb after pass from ODIN, Ive pulled the usb when at-t white screen showed..
Couple of problems Im having...
1. I cant get into recovery with any button combo.
2. I cant adb into recovery as ADB says no device, despite drivers/com port are fine.
3. Some ODIN detect phone, some heimdall, as stated adb doesnt?
4. I cant enable usb debugging as I cant get past galaxy screen.
5. How can I tell what android is actually installed?
6. Are there different key combos in 2.1,2.2,2.5 to get into recovery?
7. ADB driver installer doesnt see phone.
Im guessing I can't send it into adb recovery with usb debugging?
Ive flashed corn kernel, speedmod, I897UCKF1-AutoRoot-DesignGears all trying vol +/home/power button, along with many other combos, always boots past recovery.
Android Control wont detect it, cant use for recovery there either..
Im feeling this is driver issue, what drivers would you guys recommend to get ODIN one clicks, adb, and/or android control to see it.

Teletech said:
flashing - I896UXJI2 TORONTO rom to captivate i897 - 1101 using...
Samsung USB cable
Captivate i897 - 1101
Windows 7
Android SDK
SAMSUNG_USB_Driver_for_Mobile_Phones - 5/4/2011
I896UXJI2 TORONTO rom
Odin 3.07
java
.net
**************************
ODIN output...
**************************
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.rfs
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> zImage
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.rfs
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> dbdata.rfs
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> param.lfs
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
Am I doing this right? I load toronto in PDA, com ports and drivers all fine.
Click start, wait, it reboots, then stops at Galaxy screen after passing at-t white screen.
Ive left it plugged in and waited, and I've pulled the usb after pass from ODIN, Ive pulled the usb when at-t white screen showed..
Couple of problems Im having...
1. I cant get into recovery with any button combo.
2. I cant adb into recovery as ADB says no device, despite drivers/com port are fine.
3. Some ODIN detect phone, some heimdall, as stated adb doesnt?
4. I cant enable usb debugging as I cant get past galaxy screen.
5. How can I tell what android is actually installed?
6. Are there different key combos in 2.1,2.2,2.5 to get into recovery?
7. ADB driver installer doesnt see phone.
Im guessing I can't send it into adb recovery with usb debugging?
Ive flashed corn kernel, speedmod, I897UCKF1-AutoRoot-DesignGears all trying vol +/home/power button, along with many other combos, always boots past recovery.
Android Control wont detect it, cant use for recovery there either..
Im feeling this is driver issue, what drivers would you guys recommend to get ODIN one clicks, adb, and/or android control to see it.
Click to expand...
Click to collapse
You're having some odd issues. I'm starting to think that your internal might be the issue. Perhaps try to partition an sd card and flash the ROM on it (there's a guide on here).
1. Button combos are in your Bootloaders, won't change.
2. ADB requires usb debugging.
3. That's drivers oriented, also Odin won't work on the same usb port that you installed Heimdall on.
4. That answers your ADB problem.
5. Only by flashing the ROM/firmware or getting in recovery.
6. Yes, key combos did change from Froyo and GB. That being said, there are no 2.5, GB stops at 2.3 (KK4) for stock builds.
7. Same thing at #2.

Related

Need a fix ASAP PLEASE!

I'm pretty sure my phone isn't bricked.
Ok, this is what I've done...
I'm on official Froyo for UK, unbranded handset (i think jpo/jpp firmware).
I tried to install Voodoo Lagfix (stable, released today) by Odin.
I started Odin up, put PDA as the Voodoo file, put my phone into download mode, connected the usb, waited for odin to detect it and then clicked start.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> zImage
<ID:0/009> Complete(Write) operation failed.
That's what Odin said, so I presumed it failed.
The screen was black and not doing anything so I unplugged it and removed the battery. When I put in battery and tried to start up phone, I get a logo of a flip phone on the left, with a line dash to a yellow triangle with black explanation mark, and then another dashed line to a computer.
Can I have a set of instructions on how to continue please!
which ROM did you install?
make sure the TAR is not corrupted
even if it failed, you can flash it again
the only way to find out if it works is to unplug and reboot it
there is always the JIG option if you don't have the 3 button modes
AllGamer said:
which ROM did you install?
make sure the TAR is not corrupted
even if it failed, you can flash it again
the only way to find out if it works is to unplug and reboot it
there is always the JIG option if you don't have the 3 button modes
Click to expand...
Click to collapse
It's not a ROM, I tried to put on Voodoo Lagfix 5 (stable) onto my stock firmware from Kies (JPP/JPO).
Shall I try to reflash the Lagfix? I think I need to flash a firmware, can someone please tell me, starting to get a little stressed haha.
BTW, Download Mode is working.
I would imagine you are going to have to flash stock firmware to it, you can try flashing it again or perhaps a different kernel
got it working now guys
just reflashed it and it worked

Getting a symbol of a phone and PC with a caution sign inbetween when I boot my phone

What does that mean? I'm getting it after I put my phone into download mode and tried to put my phone back to stock with Odin. Odin hung up on me and I had to disconnect.
What do I do?
I could be wrong but I believe that's a brick..? I've never bricked but that would be my guess
Sent from my SAMSUNG-SGH-I897 using XDA App
Oh, jesus, don't tell me that.
Whew, ****, got it back into DL mode using this: http://forum.xda-developers.com/showthread.php?t=775911
I had this same issue, now I can't seem to get my phone to power up at all. any suggestions?
Post above yours
it is getting to the same point about 1/8 of an inch of a blue bar and it stops same problem I have been having
What build is your phone, located under battery, mine is 1008
1009, reconnected/ restarted odin and its on
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
been there for 5 minutes or so
Hookiloo said:
1009, reconnected/ restarted odin and its on
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
been there for 5 minutes or so
Click to expand...
Click to collapse
Not good. There is than one odin.sounds like you are going to have to use a different method. There is an odin that people with 1010 build have to use. Let me see if I can find the thread
try this
M y phone need this done 3 or 4 times before it finninshe odin some times.
http://forum.xda-developers.com/showthread.php?t=775911
odin is wonky especially if you have the stock rom jf6 on there. it is always best to have odin prepared with the pit and .tar files first and to use the usb cable + 2 buttons to get download mode, i remember way back when my phone was stock and i tried to flash stock it wasn't working. i flashed a beta rom jh2 ( the only altenative at the time) and it worked. never had another issue flashing and i have been through many froyo versions and ports from other galaxy s phones and used all the 2.1 roms. odin jf6 just didn't like to flash over jf6 but it usually eventually works.

[ROM]EG01 - Factory STOCK ODIN Image - VZW LTE Tab 10.1

I have installed and tested this on my own Verizon Galaxy Tab 10.1 LTE. Installed successfully with Odin3 1.85. Can also verify the standing root method for LTE devices with kernel.zip and recovery.zip works.
Onto the ROM
Reproduced with permission from krylon360 at rootzwiki.com (http://rootzwiki.com/topic/7718-romleakodineg01-factory-stock-odin-image-vzw-lte-tab-101/)
- Begin Quote -
This is the STOCK VZW Galaxy Tab 10.1" 4G LTE Factory Firmware.
This includes everything,
boot.img
cache.img
recovery.img
system.img
fusetrigger.bin
lte_modem.bin
modem.bin
You will need ODIN, and the drivers for your tab to flash this.
Instructions:
•Power down your tablet
•Then power up tablet by holding the power button and volume down (landscape view it will be the closest to the power button)
•Wait till you see the Samsung Galaxy logo and release power button
•You should be seeing a screen matching the one below (2 options recovery and ODIN)
•Click the volume up button (farthest from power in landscape) this will set you tablet in ODIN mode...
•Once your TAB is in ODIN (Downloading) Mode, connect it to your PC, you should see the COM port with a number in Yellow.
•Put the tar you downloaded (see link below) in the PDA slot. MAKE SURE THE ONLY THINGS THAT ARE CHECKED IS AUTO REBOOT and F.RESET TIME
•Hit Start
•It'll auto reboot once it's done.
Congrats, you are now back to stock.
- End Quote -
ROM - https://drive.google.com/file/d/0B4bGSoozB2TnbmZxSGNBRzZjUkE/view?usp=sharing
Odin3 - https://drive.google.com/file/d/0B4bGSoozB2TnalUxSmd3ZzJkME0/view?usp=sharing
I can verify that krylon360's files/method works. After breaking my recovery I found his posts and used his method to return to stock. I would actually suggest to ALL LTE owners to download those files and store somewhere safe if you intend to continue trying new ROMs/Kernels. After restoring the factory ROM I went on to Liquid Speed with an OC of 1.4.
Wouldn't have been possible without krylon360.
Just used this to set my Gtab back to stock. Worked like a charm.
Warning, don't be a dummy like me and forget to backup your titanium backup file, and factory cwr nand to your computer.
Gaurantee I won't forget to do that again. lol
This method worked for me as well. Got some kinds of rings on my screen after only having the tab for 2 weeks so had to revert to stock before shipping it back to sammysong.
Thanks! Files saved on laptop if ever needed again.
Sent from my GT-I9100 using xda premium
Is this the i905.02 v.eh04?
Kernel Version 2.6.36.3
Build Number HMJ37.EH04.SCH-I905.EH04
or is this a precursor to the EHO4 build?
(Had a mishap, and this is what came on the tablet when it was returned from samsung)
TTboy404 said:
Is this the i905.02 v.eh04?
Kernel Version 2.6.36.3
Build Number HMJ37.EH04.SCH-I905.EH04
or is this a precursor to the EHO4 build?
(Had a mishap, and this is what came on the tablet when it was returned from samsung)
Click to expand...
Click to collapse
This is the prior version to EH04 (EG01). You'll be prompted after installation, that there is an update available which will bring you to EH04.
ifiweresolucky said:
I have installed and tested this on my own Verizon Galaxy Tab 10.1 LTE. Installed successfully with Odin3 1.85. Can also verify the standing root method for LTE devices with kernel.zip and recovery.zip works.
Onto the ROM
Reproduced with permission from krylon360 at rootzwiki.com (http://rootzwiki.com/topic/7718-romleakodineg01-factory-stock-odin-image-vzw-lte-tab-101/)
- Begin Quote -
This is the STOCK VZW Galaxy Tab 10.1" 4G LTE Factory Firmware.
This includes everything,
boot.img
cache.img
recovery.img
system.img
fusetrigger.bin
lte_modem.bin
modem.bin
You will need ODIN, and the drivers for your tab to flash this.
Instructions:
•Power down your tablet
•Then power up tablet by holding the power button and volume down (landscape view it will be the closest to the power button)
•Wait till you see the Samsung Galaxy logo and release power button
•You should be seeing a screen matching the one below (2 options recovery and ODIN)
•Click the volume up button (farthest from power in landscape) this will set you tablet in ODIN mode...
•Once your TAB is in ODIN (Downloading) Mode, connect it to your PC, you should see the COM port with a number in Yellow.
•Put the tar you downloaded (see link below) in the PDA slot. MAKE SURE THE ONLY THINGS THAT ARE CHECKED IS AUTO REBOOT and F.RESET TIME
•Hit Start
•It'll auto reboot once it's done.
Congrats, you are now back to stock.
- End Quote -
ROM - http://goo.gl/XPMXv
Odin3 - http://goo.gl/xcWp2
Click to expand...
Click to collapse
Hey guys,
Is there a way to install this directly from the tab? I have a mac, so can't use ODIN.
Thanks
Ken_Boolean said:
Hey guys,
Is there a way to install this directly from the tab? I have a mac, so can't use ODIN.
Thanks
Click to expand...
Click to collapse
You might want to check out this thread regarding ODIN for mac. If you try it remember to have KIES for MAC installed first. That should give you the proper drivers... at least it does on Windows:
http://androidforums.com/samsung-galaxy-s2-international/403407-odin-mac-download.html
Good Luck.
I had bricked my Verizon Galaxy Tab 10.1 4G LTE. I used the above method and revived it back to life.
Many thanks to ifiweresolucky for this fine fix. It saved me $700 for a new tablet!!
Thank you for this.. love you guys.
Would a kind person please, please dump a PIT file for the SCH-i905? If you can figure out which partition contains the PIT file, you should be able to dump it with something like this:
Code:
dd if=/dev/block/mmcblk0p9 of=/sdcard/sch_i905.pit bs=4096
You might be able to view partitions by type with something like the following command:
Code:
ls -l /dev/block/platform/msm_sdcc.1/by-name/
My APP partition is 256MB and the EG01 system.bin is 312MB so I can not flash back to stock with Odin, fastboot or nvflash. No adb, no recovery, Heimdall does not work.
stuck
well i have used the file to go back to stock lots of times, but this time i cant get on vzw network also get cannot open sales code on boot up any idea whats up thanks in advance
This method saved me, THANK YOU OP!
Has anyone seen a stock ICS image for the VZW 10.1. This HC image is great for going back to original but it might be nice to ODIN a clean ICS.
Granted it only takes about 20 for HC to update to ICS but once or twice it took a few days to begin the update process.
Michael
Sent from my SCH-I905 using xda premium
MichaelMcC said:
Has anyone seen a stock ICS image for the VZW 10.1. This HC image is great for going back to original but it might be nice to ODIN a clean ICS.
Granted it only takes about 20 for HC to update to ICS but once or twice it took a few days to begin the update process.
Michael
Sent from my SCH-I905 using xda premium
Click to expand...
Click to collapse
Have you tried www.sammobile.com?
Sent from my GT-P7500 using XDA Premium HD app
eushaun99 said:
Have you tried www.sammobile.com?
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Yes I check there now and then, they don't have the Verizon ROMs for the SGT 10.1
Sent from my SCH-I905 using xda premium
Can anybody give me an idea of how long it takes to reboot?
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> fusetrigger.bin
<ID:0/003> lte_modem.bin
<ID:0/003> modem.bin
<ID:0/003> boot.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
I have been sitting here for close to ten minutes now. The display appears to be powered up, but nothing new has happened since the recover mode blacked out.
Please and thank you
Mr Spock said:
Can anybody give me an idea of how long it takes to reboot?
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> fusetrigger.bin
<ID:0/003> lte_modem.bin
<ID:0/003> modem.bin
<ID:0/003> boot.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
I have been sitting here for close to ten minutes now. The display appears to be powered up, but nothing new has happened since the recover mode blacked out.
Please and thank you
Click to expand...
Click to collapse
I don't recall it ever taking 10 between any step. By now you've probably figured something out.
Sent from my SM-N900V using XDA Premium 4 mobile app
I had to put it down for a few days. I am at an impasse. Everything looks good, but it never reboots. I let it stay overnight, but woke up with a blank scree. When I manually reboot, it is stuck on the Samsung logo, which is the same symptom that initially brought me here.
Thank you. Your files and instructions worked perfectly.
To add to your instructions... not that there is anyone left... after restoring to factory default, to activate without an active SIM card:
1. Press top left corner of screen
2. Press top right corner of screen
3. Press bottom left corner of screen
4. Press bottom right corner of screen
5. Press volume button closest to the power button in landscape

[Q] I messed up my girlfriend’s GalaxyS ….

Pleaseeee help ….. I am stuck in the downloading mode
Dear experts
I have messed up my girlfriend’s GalaxyS ….
I rooted her phone by following ChainFire’s thread http://forum.xda-developers.com/showthread.php?t=1056334
Followed every step and rooted phone ….Things went smooth…then suddenly phone keep dying in few hours even if its fully charged …. I thought of reapeting the whole process incase I made mistake at any stage
I run the Odin v1.85, selected “CF-Root-XX_OXA_JVO-v3.2-CWM3RFS.tar” file in PDA and click on start…..Suddenly my phone died and Odin said successful 0/ Failed 1
I got in panic mode and start the whole process again…. Since then phone is in Downloading mode.....
Then Magic happen and i got following msg frm Odin
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/004> Added!!
Then as per instruction after phone get rebooted i run superoneclick and click on Root... Its been almost 2 hours and i am having following msg on superoneclick...
Running psneuter....
Pleaseeeeeeeeeeeeeeeeeeeeeeee help me to get it up & running
Waiting for experts to save my relationship
Pleaseeeee help me guys
What to do next?
If you flash cf root kernel you will get root.You don't need superone click.
Try reboot your phone it should work.
Sent from Galaxy on latest nightly with neo kernel
First of all... what was the original firmware?
Second: I hope you have not messed with repartition and bootloader?
yeah, check what version she's running and flash cf-root, since you allready are capable of flashing with Odin you dont need one-click root.
Sent from my GT-I9000 using XDA App
Dear all,
Many Many thanks for your time & reply...
I did reboot at least 3 times... Still having same problem... very strange problem
I have fully charge the phone. Everything is working fine, did my msgs, reply to email, took few pics...upload them....SO far so good, happy happy happyy so put the phone on side & had dinner, picked up phone again and it was off...have to press power button long enough to start the phone... Works fine, shows little drain on battery..put it aside for while and it will be off strangely... Have to restart it by pressing power button on for long enough and it does start, work well and once put it on side for while it goes off .... (My girlfriend is mad at me ;-p ... Dont know how to solve this )
Please help guys ... Here is the required details...
Original-->
Firmware 2.3.3
Kernel 2.6.35.7 I9000xxJV0-CL182937
Build number Gingerbread.XXJVO
Does this info will help you to find the fault?
Really need help...
Many Thanks
Reflash the stock rom again just to be on the safe side.

[Q] Cant install custom recovery

Hi all !
Since a few days i have an Samsung Galaxy S4 Active (i9295), in the past i always rooted my Samsung Phones and flashed them with a custom ROM.
I boot up phone in recovery/download mode, restarting the phone while holding volume down.
The android figure pops up and everything looks fine, so i connect it to the computer and start Odin 3.07 (also tried other versions)
Odin can communicate with the device and shows [COM4], i press AP/PDA depening on Odin version and select the custom recovery file. I get back the following in the console.
Code:
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!
Odin tells me, RESTART on the top and indeed the device is restarting. It boots normally without a problem or error. Odin still shows RESTART on the computer screen.
Now im like, did it worked ? Lets boot to recovery !
No, it didnt work... No custom recovery.. BUT ! Odin now shows Passed and give me the following output in the console.
Code:
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I tried TWERP recovery, CWM Recovery and CWM with swipe.
Also tried to use a other computer, this didnt make any diffrence.
I hope for some tips
Oh, im stock now !
BrianVogel said:
Hi all !
Since a few days i have an Samsung Galaxy S4 Active (i9295), in the past i always rooted my Samsung Phones and flashed them with a custom ROM.
I boot up phone in recovery/download mode, restarting the phone while holding volume down.
The android figure pops up and everything looks fine, so i connect it to the computer and start Odin 3.07 (also tried other versions)
Odin can communicate with the device and shows [COM4], i press AP/PDA depening on Odin version and select the custom recovery file. I get back the following in the console.
Code:
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!
Odin tells me, RESTART on the top and indeed the device is restarting. It boots normally without a problem or error. Odin still shows RESTART on the computer screen.
Now im like, did it worked ? Lets boot to recovery !
No, it didnt work... No custom recovery.. BUT ! Odin now shows Passed and give me the following output in the console.
Code:
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I tried TWERP recovery, CWM Recovery and CWM with swipe.
Also tried to use a other computer, this didnt make any diffrence.
I hope for some tips
Oh, im stock now !
Click to expand...
Click to collapse
I had this exact same issue when I tried to install custom recovery and it took me longer than it should have to solve. I rooted the phone first and then I was able to flash custom recovery. I have no idea why it worked, but it did. Try that and let me know.
Thanks for your quick reply
I always install SuperUser with CWM, so how can i do this without CWM ?
BrianVogel said:
Thanks for your quick reply
I always install SuperUser with CWM, so how can i do this without CWM ?
Click to expand...
Click to collapse
FIXED !
No root needed
When u flash with odin and it does a reboot, DIRECTLY input volume UP.
First reboot needs to enter CWM to let it work, if you skip this, it will be removed and default again.
Phone is flashed now without any problems
@BrianVogel
It is best to completely power off, wait, enter download mode.
If needed - modem.bin and NON-HLOS.bin can be then be Odin flashed without repeating the flash twice. Many shady guides tell you to flash modems twice to "make it stick". The reason it won't stick is download mode entered from restart meny.
Never run Odin on same PC where Kies is installed. Odin and Kies will fight to gain control of USB connected device.
Some borked Win7 need to run a Fix from M$ KB to properly detect Samsung phone as hardware even after installation of USB driver. Google to find the Fix, download and run.
Always connect directly to PC USB - never USB hub.
I had same problem and solve with these steps:
- In ODIN uncheck "Auto-reboot"
- flash using AP/PDA as you did, but your phone remains on
- disconnect cable
- now press Home + Volume Up + Power and hold while phone turn off and turn on again into recovery
- you should see new recowery and follow on screen steps

Categories

Resources