Related
Need Help i flashed MIUI.. eng
and now i am trying to go back to an older restore and it will not let me ..
I wiped and then did restore of older nandroid (runny or shooter sense).. and did reboot .. then MIUI united worldwide boot animation comes back up again.. and again and again.. and the seems to be stuck on that MIUI boot animation .. i cant seem to flash one of my old restores.. ???
ok i did a wipe again and installed from zip.. i think i might have solved it ..
just wipe and start over again...also this doesnt belong in dev.
can some one delete this thread please
Smokeey said:
just wipe and start over again...also this doesnt belong in dev.
Click to expand...
Click to collapse
Sorry .. right.. ok.. sorry
can some one delete this thread please
marsgrafx09 said:
Need Help i flashed MIUI.. eng
and now i am trying to go back to an older restore and it will not let me ..
I wiped and then did restore of older nandroid (runny or shooter sense).. and did reboot .. then MIUI united worldwide boot animation comes back up again.. and again and again.. and the seems to be stuck on that MIUI boot animation .. i cant seem to flash one of my old restores.. ???
ok i did a wipe again and installed from zip.. i think i might have solved it ..
Click to expand...
Click to collapse
Make sure you're wiping everything including in the mount section (EXCEPT SD CARD) then restore
Sent From My Optimized HTC Incredibly Dinc
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
pittms said:
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
Click to expand...
Click to collapse
I am not sure about what ROM manager did to your device, but I guess you are stuck on boot splash screen.
And I guess you will be still able to get in recovery mode.
(Just pull your battery and replace it if you are stuck on splash screen.)
When your device is turned off, press Vol UP + Vol DOWN and then press Power button - keep all of them pressed till you sense long vibration (Usual way to get in recovery mode)
Now restore or install any ROM.
Post your experience.
Now restore or install any ROM.
Napstar said:
I am not sure about what ROM manager did to your device, but I guess you are stuck on boot splash screen.
And I guess you will be still able to get in recovery mode.
(Just pull your battery and replace it if you are stuck on splash screen.)
When your device is turned off, press Vol UP + Vol DOWN and then press Power button - keep all of them pressed till you sense long vibration (Usual way to get in recovery mode)
Now restore or install any ROM.
Post your experience.
Click to expand...
Click to collapse
Now it would sound so silly to you Napstar, but I have to accept it that I don't know how and I dont want to take a wrong direction. Since I'm very new to this, can you help guiding me on how to install ROMs. Yes, you are right I can still get into recovery mode, but I just don't know how to continue and where I can get all those ROMs. Please bear with me.
Thank you, Pitt.
just go to android development section and look at the beginner guide its easy don't worry
pittms said:
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
Click to expand...
Click to collapse
okk the thing which is done lets forget it let it gone be by gone.. and now if u want to install roms.. jst look out over the forum for ideos x6 and u will find all the roms including customs and the official once
jst download and one which u want to use .. ok u have said that u have installed cwm recovery that good,... bt do install the napstar's dual boot recovery which allows u to go to stock and custom rom as u select ...
now regarding rom... u jst cant put anyrom on ur phone it must be for ur phone ... dont worry wellcom a99 came with too many different names so here what roms u find are mostly suits all of them... jst go to the thread ... select the one that best suits u ... do read user comments so u could know whether its fully functioning or not.. dont worry some day everyone is new....
need guide to install ROMs
kshitij_bhatt said:
okk the thing which is done lets forget it let it gone be by gone.. and now if u want to install roms.. jst look out over the forum for ideos x6 and u will find all the roms including customs and the official once
jst download and one which u want to use .. ok u have said that u have installed cwm recovery that good,... bt do install the napstar's dual boot recovery which allows u to go to stock and custom rom as u select ...
now regarding rom... u jst cant put anyrom on ur phone it must be for ur phone ... dont worry wellcom a99 came with too many different names so here what roms u find are mostly suits all of them... jst go to the thread ... select the one that best suits u ... do read user comments so u could know whether its fully functioning or not.. dont worry some day everyone is new....
Click to expand...
Click to collapse
Ok, now this is the one that I like to use (UC-Kernel_v3.0.0.2_CM_7.1.0_signed and DoomKernel_v3_signed)= I can use one of these ROMs for my Wellcom A99 right?. I already downloaded it to my PC but i have no idea how to install it into my Wellcom A99. As you intructed above, I also installed the napstar's dual boot recovery in my A99. So now, downloaded ROMs are in my PC and I just need an instruction to install it to my A99. Please help me do this.. Thank you.
Pitt
pittms said:
Ok, now this is the one that I like to use (UC-Kernel_v3.0.0.2_CM_7.1.0_signed and DoomKernel_v3_signed)= I can use one of these ROMs for my Wellcom A99 right?. I already downloaded it to my PC but i have no idea how to install it into my Wellcom A99. As you intructed above, I also installed the napstar's dual boot recovery in my A99. So now, downloaded ROMs are in my PC and I just need an instruction to install it to my A99. Please help me do this.. Thank you.
Pitt
Click to expand...
Click to collapse
hi
1. download the A99 rom extract to ur PC and rename it to firmware.nb0
place it on the root of ur SD
2. u need to use only stock recovery not CWM go to the menu download fbo and click on it and u will get ur A99 on ur SD flashed
to my knowledge i repeat u cannot use CWM to flash A99 u need to flash via stock recovery or SUTL
take A99 from here : https://www.sugarsync.com/share/ddhcyiw66cyqt
do as i mentioned above and ud be ok
haree said:
hi
1. download the A99 rom extract to ur PC and rename it to firmware.nb0
place it on the root of ur SD
2. u need to use only stock recovery not CWM go to the menu download fbo and click on it and u will get ur A99 on ur SD flashed
to my knowledge i repeat u cannot use CWM to flash A99 u need to flash via stock recovery or SUTL
do as i mentioned above and ud be ok
Click to expand...
Click to collapse
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
pittms said:
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
Click to expand...
Click to collapse
okk now u got it all wrong/// uc kernals are NOT ROMS u need to download the .zip file for them and copy to sd card reboot into cwm recovery and install zip from sd card
u are getting it all wrong these are Not roms these are kernals ./... and i will suggest u not to install as i can see its a heavy thing and u r not familiar with kernals and roms...
first of all u need to download software update tool
then u need stock firmware which u could find here
mostly all the files u need are available HERE
pittms said:
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
Click to expand...
Click to collapse
hi
dear im totally confused in what u want
what do u want to do
1. do u want to flash A99 Rom
then do as i have mentioned
2.do u want to flash OC kernal(this is a kernal not a ROM)
then u need to add CWM to ur phone if u have an official ROM
then u also need to ROOT it and then u need to flash uc kernal via CWM
hope this is clear enough, u need to realy explain what u want in detail for u get help
haree said:
hi
dear im totally confused in what u want
what do u want to do
1. do u want to flash A99 Rom
then do as i have mentioned
2.do u want to flash OC kernal(this is a kernal not a ROM)
then u need to add CWM to ur phone if u have an official ROM
then u also need to ROOT it and then u need to flash uc kernal via CWM
hope this is clear enough, u need to realy explain what u want in detail for u get help
Click to expand...
Click to collapse
Thank you for all hands, I just need to get my phone back to work by installing ROM into Huawei Wellcome A99 as I was instructed above post but I just dont know how and i just need somebody to guide me step by step. At the moment, my phone is stuck only on splash page (welcome scree) and it goes nowhere. I have CWM inside so anyone just helps me please.
Pitt
pittms said:
Thank you for all hands, I just need to get my phone back to work by installing ROM into Huawei Wellcome A99 as I was instructed above post but I just dont know how and i just need somebody to guide me step by step. At the moment, my phone is stuck only on splash page (welcome scree) and it goes nowhere. I have CWM inside so anyone just helps me please.
Pitt
Click to expand...
Click to collapse
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
pittms said:
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
Click to expand...
Click to collapse
Which recovery version are you using?
CWM v5.0.2.3 has an option for mounting sdcard as USB device.
Boot into recovery
Connect your device to PC via USB
Option mount and storage >> mount USB storae
Stay in that menu till you want to use your sdcard (for copying files)
If you have recovery menu v2.
Choose CWM recovery first and do nb0 file copying by following above instructions.
Then reboot into recovery (advanced >> reboot recovery)
Choose stock recovery and choose install firmware.nb0 option.
If this gives any errors post it here. Someone amongst us will surely help you.
Best of luck!
pittms said:
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
Click to expand...
Click to collapse
hi
i dont get it
1. is ur USB cable not working
if working then all u need to do is connect ur phone to pc and copy the fbo to root of sd and do the flash
2. u can do Napsters method
3. if u have a Sd adapter then use it and copy the Fb0 to root of sd and do the needfull
goodluck
Now it is back to work again. Thank you very much for all the hands!!
Sent from my CSL-MI410 using XDA App
WELLCOM A99(Thai) i need ROM PLZ help me
hi !
i have Wellcom A99 ,i think Update ,but not find this phone ROM,i need NEW ROM Software A99,Now A99 power off ,i need Update ROM,Uppdate Fimware,PLZ help me ,
My Email add:[email protected]
Thanks for everybody,All my friend,
THANK YOUR!!!
cazwj said:
hi !
i have Wellcom A99 ,i think Update ,but not find this phone ROM,i need NEW ROM Software A99,Now A99 power off ,i need Update ROM,Uppdate Fimware,PLZ help me ,
My Email add:[email protected]
Thanks for everybody,All my friend,
THANK YOUR!!!
Click to expand...
Click to collapse
hi
a little bit of searching would have solved ur problem
it is available in the rollup thread anyway take it from below link
Link : http://www.mediafire.com/FB400
hi all
i flashed a mod by the italian team which is called tw launcher with a new ui on my note gt n7000 but after rebooting the phone a notification appears saying (unfortunately touchwiz home has stopped) and the phone icons disappeared totally but the notification bar remains
what should i do to get back them old twlauncher as the phone is totally does nt work
kernl is lrk that what i remember as i cant see it as the phone doesnt work
heeeeeeeeeelp me pls quickly i need my phone back
First time I heard Samsung is an Italian team.
Sent from my GT-N7000 using Tapatalk 2
jjojo525 said:
hi all
i flashed a mod by the italian team which is called tw launcher with a new ui on my note gt n7000 but after rebooting the phone a notification appears saying (unfortunately touchwiz home has stopped) and the phone icons disappeared totally but the notification bar remains
what should i do to get back them old twlauncher as the phone is totally does nt work
kernl is lrk that what i remember as i cant see it as the phone doesnt work
heeeeeeeeeelp me pls quickly i need my phone back
Click to expand...
Click to collapse
You dont have any back up? If have you need to restore your back up. It happens because your SystemUI.apk is not compatible with the current framework. If you have a custom rom you can copy SystemUI.apk file from your downloaded zip file in system/app and move to system folder, set permission and move to app folder and repalce with current on and finally reboot if didnt work flash a custom or stock rom.
kopitalk said:
First time I heard Samsung is an Italian team.
Click to expand...
Click to collapse
that is the thread i found the mod and it is called twlauncher with new style folders
http://forum.xda-developers.com/showthread.php?t=1920091
and the phone is in stock rom ics 4.0.4 kernel lrk
is there any way to restore the mobile without flashing custom or stock rom??
Most likely your rom is stock odexed. You can manually delete the corresponding .odex files of those files which are replaced by the MOD in /system/app and reboot.
jjojo525 said:
is there any way to restore the mobile without flashing custom or stock rom??
Click to expand...
Click to collapse
yes either as said above, try deleting the corresponding .odex files of the apps replaced, or extract the stock apks from the stock rom and manually replace then to get back the stock look
nokiamodeln91 said:
yes either as said above, try deleting the corresponding .odex files of the apps replaced, or extract the stock apks from the stock rom and manually replace then to get back the stock look
Click to expand...
Click to collapse
kopitalk said:
Most likely your rom is stock odexed. You can manually delete the corresponding .odex files of those files which are replaced by the MOD in /system/app and reboot.
Click to expand...
Click to collapse
guys i cant access to any program on the phone there are no icons on the screen, just the wallpaper and the keeping appear notification (unforunately touchwiz home has stopped)
how can i access to the programs
i reboot the phone and replace the battery 3 times but it still has no response
do you have access to cwm recovery? and an external SD card?
nokiamodeln91 said:
do you have access to cwm recovery? and an external SD card?
Click to expand...
Click to collapse
i flashed the stock rom finally and get my phone
i root my phone by flashing root.zip file and it is rooted and that way works great for me and so safe
and i want to flash cwm recovery coz i saw in some thread that i can back up all the rom i use on my phone, do i understand rightly??
and how i flash cwm recovery coz i use the temporare cwm.zip as cwm recovery
jjojo525 said:
...and how i flash cwm recovery coz i use the temporare cwm.zip as cwm recovery
Click to expand...
Click to collapse
Maybe you should read this thread "Do not use cwm.zip (temp recovery) to root Galaxy note on ICS!!"
And read a little bit more of the stickies. Until now you should feel very lucky you didn't brick your device.
ThaiDai said:
Maybe you should read this thread "Do not use cwm.zip (temp recovery) to root Galaxy note on ICS!!"
And read a little bit more of the stickies. Until now you should feel very lucky you didn't brick your device.
Click to expand...
Click to collapse
i didnt use cwm.zip to root the phone as it is already rooted i used it to flash some.zip files to update the phone such as dialer of the sgs3 to get it on my device
is that dangerous too????
thx dude for advice and thread
wait ur answer
ThaiDai said:
Maybe you should read this thread "Do not use cwm.zip (temp recovery) to root Galaxy note on ICS!!"
And read a little bit more of the stickies. Until now you should feel very lucky you didn't brick your device.
Click to expand...
Click to collapse
and i want to ask somethin,cwm recovery is by itself or it is with kernel such as speedmod kernel
thus i want to install cwm recovery but i am confused if it is alone or included in a kernel such as speedmod kernel
so do i need to flash speedmod kernel for example to install cwm recovery??
sorry for bla bla bla ... but i am confused
jjojo525 said:
and i want to ask somethin,cwm recovery is by itself or it is with kernel such as speedmod kernel
thus i want to install cwm recovery but i am confused if it is alone or included in a kernel such as speedmod kernel
so do i need to flash speedmod kernel for example to install cwm recovery??
sorry for bla bla bla ... but i am confused
Click to expand...
Click to collapse
Most if not all recent custom kernels have cwm built in to the kernel.
Sent from my GT-N7000 using xda premium
Hey guys!
As Google recently announced Lollipop update for Android one in upcoming weeks, Everyone want to go back to stock ROM to get the official update. SO here I present you the stock ROM flashable zip
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE!!!
Why this?
Yes, there are other ways of reverting too, but why this method?
Easy to use
No risk of IMEI erase
No additional software/drivers required
Stock recovery not required
Hastle free
How to?
Its easy. Just flash as any other custom ROM
Download the zip and place it in your sdcard
Reboot to recovery
Wipe data, cache, factory data reset
Install zip from sdcard
Navigate to zip and install
Reboot
Screenshots
Downloads and F.A.Qs in second post
Download
http://www.mediafire.com/download/k470f8wohaf0pg0/sprout_stock_KPW53.zip
F.A.Q
Will I get lollipop update?
You might get lollipop update, but mostly, you won't be able to update
Will this work on my phone?
It works on the first three Android One phones i.e. Micromax Canvas A1, Karbonn sparkle V, Spice Dream UNO Mi-498.
This is tested in Micromax Canvas A1 only, though
Is it rooted?
No. It is the full stock firmware
Do I need to install gapps?
No. The stock firmware already has Google apps
Which recovery should I use?
It is tested in Philz recovery. But TWRP and CWM should work too
Any tweaks applied?
No. Its just stock
deodexed or odexed?
I just said it is 'stock' ROM, like 3 three times now. You still ask?
can this rom be flashed over cm11 or pac rom?
drsiddique5700 said:
can this rom be flashed over cm11 or pac rom?
Click to expand...
Click to collapse
Yes just check the installation method
For ota I need stock recovery and locked BL, right?
Joyarup said:
For ota I need stock recovery and locked BL, right?
Click to expand...
Click to collapse
Right. But I'll try to make it compatible with custom recoveries too
Reply please
I tried the method..but dat doesn't work..I am on cm 12.1..philz recovery... I turned off my phone went into recovery did all the procedure cache factory reset and all..den SD card to install zip I found my location..but when I clicked on it..it says error..why..did I miss something
Kickstan said:
I tried the method..but dat doesn't work..I am on cm 12.1..philz recovery... I turned off my phone went into recovery did all the procedure cache factory reset and all..den SD card to install zip I found my location..but when I clicked on it..it says error..why..did I miss something
Click to expand...
Click to collapse
It would be great if you can give me more details on the error. And if you are on lollipop, make sure you formated system partition before flashing
Urgent reply please
Sir..i not on lollipop..I am using cm 12.1..so I wanted to go back to stock from..so as it was written..I downloaded the zip and pasted in SD card..den u turned it off...went to philz recovery..den I searched for the file...I clicked on install new rom...den I searched the file in external SD card..den as soon as I clicked on in..something happened down the procedure and error dats all...I want to know dat I am currently using cm 12.1...by using our zip file will I go back to stock or not..as it say error...I'll send u a screen shot soon...but do reply on dis urgent thank you sir...
Many bugs in this rom....i flashed this rom successfuly by twrp recovery... and when i open playstore its couldnot be opened...its showing unfortunately stopped.. again and again after reboot...pls help me how i solve this....pls reply me fast
Will this work on aq4502 ?
Did this actually work for anyone?
ASHU9668 said:
Many bugs in this rom....i flashed this rom successfuly by twrp recovery... and when i open playstore its couldnot be opened...its showing unfortunately stopped.. again and again after reboot...pls help me how i solve this....pls reply me fast
Click to expand...
Click to collapse
Flash this stable KPX44 version of Android 4.4.4 rom on your device, this is the last & latest Kitkat build for our devices.
Link - KPX44 Kitkat
Compatibility -
*.Sprout4 & sprout8.
Credits -
*. 1cefire
plz upload the link of karbonn sparkle v h/w v1.1 s/w kpw53
Hi.. I wana change my Lenovo A7000 ON/OFF animation..i have Google on it but there's no use..
If anyone done this on their phone kindly share your comments...
Thanks in advance..
get a bootanimation with same resolution as of your phone in .zip format replace it with the default one in root/system/media.rather than this,you can get flashable bootanimation.zip too,which could be flashed with a custom recovery like twrp. :cheers,happy flashing
HIT THANKS IF I HELPED
Thanks for your reply.. where can i get flashable bootanimation.zip for my lenovo A7000
Thanks in advance..
I have tried marshmallow-bootanimation-flashable.zip from TWRP but not worked for me...
I have also tried this https://www.youtube.com/watch?v=xLdHA8ke5KU
but not working for me.. not able to change files in system folder (I have my phone rooted.)
kindly suggest ..
yadavml said:
I have tried marshmallow-bootanimation-flashable.zip from TWRP but not worked for me...
I have also tried this
but not working for me.. not able to change files in system folder (I have my phone rooted.)
kindly suggest ..
Click to expand...
Click to collapse
Give it a read write permission. Using root explorer. There is an option on the top which will say r/o click it, it'll change to r/w. Try again and see
Try ROM manager apk.
need any help in changing bootlogo! ask me brothers
and here's latest boot logo am usinghttps://www.youtube.com/watch?v=s2_ml34ytao&feature=youtu.be
There will be flashable zips for bootanimation. Plenty of there are available in google. You can flash any of them through twrp