I installed the senseHero but now the phone part, it hangs on boot
even if you reinstall a new firmware hangs on boot
helps me
did you do a complete wipe before installing?
Wrong forum. try the Dream Q&A or in the ROM's thread.
Mookie_Jones said:
did you do a complete wipe before installing?
Click to expand...
Click to collapse
Yes, I have also tried to change SD
heres the best help you can get
http://bit.ly/6pPHDJ
oh sorry
close this thread!
this is the log file -> http://federico.homeip.net/log2.txt
ok so did the one click root... make long story short.. i had one click for awhile now.. but i had to reinstall it when i had to wipe data.. so then after i did, i wanted to unroot and see if it worked.. it told me failed.. so i rooted again (pressed the root) button and it said i was now rooted.. even tho i already was.. i then, unrooted and turned off the phone to see if that would work as well.. i rebooted and now my phone is STUcK with the nexus logo.. it wont go to the next part which is the mixing color one.....i tried to nandroid restore and it says there is nothing inside them..
when i unrooted did it delete my backups!?!!? omg i dont know what to do... anybody know what i can do?? i wiped data/ factory re set and its still sitting here on that logo... i can pull the battery and still go into fastboot/recovery...
PLEASE someone help me.. i dont care if i have to start all over, i want it working! lol
do you still have custom recovery or when you boot into recovery do you get the stock version?
Orangeandblue302 said:
do you still have custom recovery or when you boot into recovery do you get the stock version?
Click to expand...
Click to collapse
I have the latest clock work recovery...
Download and flash a Rom.
You may have f'd up your current Rom files. So if you can go into recovery, just download a new Rom from here..put it on your sd card and flash.
^what he said
just flash a stock root rom. that way you have a clean nand to work from.
I got some problem with installing a Custom rom...
I allready got root from superone Click, got Titanium Backup working...
then i installed The clockworkmod (external sd) from the tread in the forum.
then i moved the Custom rom MODACO FR17 Fear edition to my external sd..
booted into CMW by holding VOL DOWN + POWER
backup with nand
then wiped data and Cache
then installed the Custom rom and it went fine it took 3-4 min and then it said ok
I rebooted and i just hanged on the LG LOGO for 10-15 min.
removed the battery and still the same hangs on the LG LOGO
tried flashing it all over but still the same...
i was so lucky that i could restore my backup and now it up running...
can somebody please help me what could have gone Wrong ??
should i try another CWM ??
dk_iceman said:
I got some problem with installing a Custom rom...
I allready got root from superone Click, got Titanium Backup working...
then i installed The clockworkmod (external sd) from the tread in the forum.
then i moved the Custom rom MODACO FR17 Fear edition to my external sd..
booted into CMW by holding VOL DOWN + POWER
backup with nand
then wiped data and Cache
then installed the Custom rom and it went fine it took 3-4 min and then it said ok
I rebooted and i just hanged on the LG LOGO for 10-15 min.
removed the battery and still the same hangs on the LG LOGO
tried flashing it all over but still the same...
i was so lucky that i could restore my backup and now it up running...
can somebody please help me what could have gone Wrong ??
should i try another CWM ??
Click to expand...
Click to collapse
newest CWM is here : http://forum.xda-developers.com/showthread.php?t=1098001
generally, you did everything right, wipe data / cache FIRST in recovery, THEN apply custom ROM
superone Click is not really needed before, but it doesn´t matter ...
you could update baseband first : http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110502/
use Baseband 1035.21_20110405 , Baseband 1035.21_20110502 is buggy !
75markus said:
newest CWM is here : http://forum.xda-developers.com/showthread.php?t=1098001
generally, you did everything right, wipe data / cache FIRST in recovery, THEN apply custom ROM
superone Click is not really needed before, but it doesn´t matter ...
you could update baseband first : http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110502/
use Baseband 1035.21_20110405 , Baseband 1035.21_20110502 is buggy !
Click to expand...
Click to collapse
The CWM your refering to is the one i used ? should i try the one useing INTERNAL SD ?
does it matter that before i used the mentioned CWM above i tried to use the CWM ROM MANAGER from Marked, but it did'nt work, then i installede the other CWM ??
I Allready got the baseband 405 installed
can it have something to do with the custom rom change the fileformat to EXT4 ??
I really dont undestand what went wrong ?? I have been flashing rom since HTC HERO, never had problems not even with SGS
had the same problem that it hange at the LG log, i searched for a recovery solution and i found one in this forum and found a soltution to restore the phone with NVFlash
here is the link :http://android.modaco.com/content/l...rom-release-v10b-dated-1300166062-15-03-2011/
all you have to do is download the 2 files from there, take the battery out of your device, connect it to the computer. hold up and down and power and a device will be recognized by your system (the device disp;lay will stay black)
install the downloaded driver (the device should be recognized by your windows)
then run the bat file from the 2nd download and the device should be restored.
after that it will go into boot loop and you have to insert the battery.
then it should start up like a new device. hope that helps
grognaz said:
had the same problem that it hange at the LG log, i searched for a recovery solution and i found one in this forum and found a soltution to restore the phone with NVFlash
here is the link :http://android.modaco.com/content/l...rom-release-v10b-dated-1300166062-15-03-2011/
all you have to do is download the 2 files from there, take the battery out of your device, connect it to the computer. hold up and down and power and a device will be recognized by your system (the device disp;lay will stay black)
install the downloaded driver (the device should be recognized by your windows)
then run the bat file from the 2nd download and the device should be restored.
after that it will go into boot loop and you have to insert the battery.
then it should start up like a new device. hope that helps
Click to expand...
Click to collapse
I got it up running again by restoring my nand backup, and its working.
but what i would like to is installe a custom rom, would that your are saying help me ??
do i have to root it after doing the above ?
dk_iceman said:
The CWM your refering to is the one i used ? should i try the one useing INTERNAL SD ?
does it matter that before i used the mentioned CWM above i tried to use the CWM ROM MANAGER from Marked, but it did'nt work, then i installede the other CWM ??
I Allready got the baseband 405 installed
can it have something to do with the custom rom change the fileformat to EXT4 ??
I really dont undestand what went wrong ?? I have been flashing rom since HTC HERO, never had problems not even with SGS
Click to expand...
Click to collapse
you can try and download / install CWM 3028 with ROM Manger, it also used to work for me ...
perhaps the EXT4 conversion didin´t work, who knows ...
you didn´t do anything wrong yet, so keep trying
Just one question, did you wipe the dalvik cache ?
Mike_52 said:
Just one question, did you wipe the dalvik cache ?
Click to expand...
Click to collapse
yes i tried again now... and wiped dalvik cache in advanced. still the same stops on the LG LOGO
one question.. when entering CWM by holding VOL DOWN + Power i have read it should say ANDROID ?? but mine Dosen't say ANDROID , it just goes from LG LOGO into CWM
okay now Im starting all over i think...
I just flashed the O2X with NVflash and beging from scratch
make sure your CWM is updated the first CWM version had issues
Anyway you should post such threads in General, it has nothing to do with dev.
Sorry for placing this tread in the wrong place...
I finally got something working..
CyanogenMod 7 is running and BlazingDragon 1,7 works perfekt..
but still no matter what i do i can't get MoDaCo FR17 Fear Edition to work :-(
dk_iceman said:
Sorry for placing this tread in the wrong place...
I finally got something working..
CyanogenMod 7 is running and BlazingDragon 1,7 works perfekt..
but still no matter what i do i can't get MoDaCo FR17 Fear Edition to work :-(
Click to expand...
Click to collapse
you can try orig. FR17 prebake from Modaco, worked fine for me ... http://android.modaco.com/content/l...ptimus-2x-with-online-kitchen-now-with-oc-uv/
FR17 Fear is using my theme, you can apply afterwards if you like
find in my signature BGB Theme
Have you tried downloading the ROM one more time?
Maybe you got a bad download. you could do a MD5 check on the file to be sure.
cagra said:
Have you tried downloading the ROM one more time?
Maybe you got a bad download. you could do a MD5 check on the file to be sure.
Click to expand...
Click to collapse
Tried that also :-S
the only thing i haven't tryed is Checking the MD5, wich program do you use to check it with ?
Never done a MD5 check my self, but there should be plenty of freeware tools that can do it.
I had the same problem on fear edition. After i got stuck @ logo i just wiped dalvik and cache again 2x and then rebooted and started working fine.
Sent from my LG-P990 using XDA App
peacekeeper05 said:
I had the same problem on fear edition. After i got stuck @ logo i just wiped dalvik and cache again 2x and then rebooted and started working fine.
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
still not working
im new to this forum so im not sure if i'm at the right place so i will just ask
today i placed a custom rom on my phone read everything and did everything as said because it was the first time, but when i was done the samsung logo came and turned blue.
so i dont know what that means but here is some info
i rooted the phone
then installed clockwork
and then installed cyanogenmod 10.1
and gapps
i hope this is enough infomation for you guys and that you can help me
many thanks happy snappy
androidarmv6
Hello!
Try to repeat the process but using official androidarmv6 ROM for cooper (S5830):
http://forum.xda-developers.com/showthread.php?t=2199575
Don't forget to wipe factory/data.
Good luck.
happy snappy said:
im new to this forum so im not sure if i'm at the right place so i will just ask
today i placed a custom rom on my phone read everything and did everything as said because it was the first time, but when i was done the samsung logo came and turned blue.
so i dont know what that means but here is some info
i rooted the phone
then installed clockwork
and then installed cyanogenmod 10.1
and gapps
i hope this is enough infomation for you guys and that you can help me
many thanks happy snappy
Click to expand...
Click to collapse
piobikt faireft
shyaoran.spam said:
Hello!
Try to repeat the process but using official androidarmv6 ROM for cooper (S5830):
http://forum.xda-developers.com/showthread.php?t=2199575
Don't forget to wipe factory/data.
Good luck.
Click to expand...
Click to collapse
thank you for helping me but i need some more explaination because this is the second time and the first time i had some help but i forgot about all that so if you could explain it i would be very grateful
p.s. flashing is not my strongest point if you understand
ok here it goes-
1-open cwm recovery
2-select factory data reset/wipe
3-select install update from sd card , choose zip from sd card n select ur respective rom flash it!
4-then select wipe cache partition
5-select advanced - wipe dalvik cache.
6- reboot system now n u r done
plss hit thanx if helped.
Format /system too if u r flashing any custom rom over the samsung stock rom for the first time...remember this tip forever
Sent Via XDA™ Premium
To format all, go to CMW,
1- Mounts and storage
2- Format cache/data/system
I hope that i Help you.
Thanks
Thanks for the explanation you guys i Will do it tommorrow you Will hear it If it works or not
bad news
well i did all three but it didnt work the samsung logo now turns red and dissapears and when i tried to install rom
but guys i think i screwed it up because somehw i lst my backup and i can only go to recovery mode and download mode
and i think the usb is not on debugging mode and is it still possible to fix the phone even if i can only use recovery mode
So i was installing some drivers from chainfire but when my phone was rebooting it just got stucked in the s3 mini logo,.. i can acces CWM recovery and download mode. i tried doing a factory data wipe, then cache wipe and dalvick wipe. After after all that it's still stucked.
Can someone help pls ._. ... btw i had CM 11 rom.
Sorry if other threads like this are already posted but i really don't have anytime to search all the forums.. i need my phone back D:
If u have a nandroid backup just flash it back and everything must be fixed hopefully
o0VIP0o said:
If u have a nandroid backup just flash it back and everything must be fixed hopefully
Click to expand...
Click to collapse
Oh... thanks for the reply but i dont have a backup.. but can just flash a stock rom?
Alright... Well in ur case u should try u won't lose anything... Anyway try getting the os on the external sdcard and then flash through CWM recovery
Hope it works GOOD LUCK
johnkylem00 said:
Oh... thanks for the reply but i dont have a backup.. but can just flash a stock rom?
Click to expand...
Click to collapse
Yes you have to flash a stock firmware with odin but you will lose your current ROM and root access
Sent from my SM-G900 using xda-developers app