My karbonn sparkle v is dead/breaked.
I i was on cm12.1, then i thought of flashing the factroy firmware 4.4.4 .
Accordingly i flashed the stock firmware with sp flash tools. At, first it was stuck for a long time then i removed the usb flashed again with the battery on.
The flashing was ok "download ok" but my phone doesn't switch on and is completely dead. I flashed many times with download ok status but still my phone is dead.
I'm in urgent need of the guidance of the expert developers so that i can unbrick my phone. I'm phone-less now.
did you tried different firmware? Can you go to the recovery? Or even to fastboot?
puchupechu said:
My karbonn sparkle v is dead/breaked.
I i was on cm12.1, then i thought of flashing the factroy firmware 4.4.4 .
Accordingly i flashed the stock firmware with sp flash tools. At, first it was stuck for a long time then i removed the usb flashed again with the battery on.
The flashing was ok "download ok" but my phone doesn't switch on and is completely dead. I flashed many times with download ok status but still my phone is dead.
I'm in urgent need of the guidance of the expert developers so that i can unbrick my phone. I'm phone-less now.
Click to expand...
Click to collapse
I had exactly the same problem. even my phone was dead for a day, the problem was that i was using older version of sp flash tools
please check if you are using correct version of sp flash tools.
download sp flash tools, drivers and firmware from moulinsky website.
Hit thanks if it helps.:good:
Try to use a different version of SP flash tools. Also try to flash a different ROM. OR TRY THIS >>>> Just download the official firmware and copy all the image files in the adb/fastboot folder and flash them one by one. secro.img may not flash. You will have your phone up and running but IMEI may be invalid. So there is a thread which tells you to make "mp0b_001" file which carries IMEI and just copy-paste and restarting will do the job. These can be the steps easily followed by a noob (like me ) This will fix your phone or atleast Android one phones. Good luck.
can u access fastboot or recovery
puchupechu said:
My karbonn sparkle v is dead/breaked.
I i was on cm12.1, then i thought of flashing the factroy firmware 4.4.4 .
Accordingly i flashed the stock firmware with sp flash tools. At, first it was stuck for a long time then i removed the usb flashed again with the battery on.
The flashing was ok "download ok" but my phone doesn't switch on and is completely dead. I flashed many times with download ok status but still my phone is dead.
I'm in urgent need of the guidance of the expert developers so that i can unbrick my phone. I'm phone-less now.
Click to expand...
Click to collapse
can u access fastboot or recovery
Use lastest version of sp tool & solve the problm.. I was also face that issue..
Problem Solved
Dear friends.. thank you all so much. I used different ( latest ) SP flash tools , mmx lollipop Stock and I was fixed.. thank you so much. even the service centre had given up I had no hope and went to local repair shop.. He open my opened my phone and said hardware problem ( warranty void) but could repair the phone... F**k the bastard. NOw it cause of of you I have my phone back.. Thank you so much
puchupechu said:
Dear friends.. thank you all so much. I used different ( latest ) SP flash tools , mmx lollipop Stock and I was fixed.. thank you so much. even the service centre had given up I had no hope and went to local repair shop.. He open my opened my phone and said hardware problem ( warranty void) but could repair the phone... F**k the bastard. NOw it cause of of you I have my phone back.. Thank you so much
Click to expand...
Click to collapse
Feeling great that I was able to help you :laugh::laugh::laugh:
please help me i have same problem in karbon sparkle v
puchupechu said:
My karbonn sparkle v is dead/breaked.
I i was on cm12.1, then i thought of flashing the factroy firmware 4.4.4 .
Accordingly i flashed the stock firmware with sp flash tools. At, first it was stuck for a long time then i removed the usb flashed again with the battery on.
The flashing was ok "download ok" but my phone doesn't switch on and is completely dead. I flashed many times with download ok status but still my phone is dead.
I'm in urgent need of the guidance of the expert developers so that i can unbrick my phone. I'm phone-less now.
Click to expand...
Click to collapse
i have done Format All + Download using sp flash tool afterwards phone not booting not showing charging but recognised with sp flash tool... flashing is successful with its stock firmware but phone not booting please help me
can you please post the links
please tell me the version of sp tool
puchupechu said:
Dear friends.. thank you all so much. I used different ( latest ) SP flash tools , mmx lollipop Stock and I was fixed.. thank you so much. even the service centre had given up I had no hope and went to local repair shop.. He open my opened my phone and said hardware problem ( warranty void) but could repair the phone... F**k the bastard. NOw it cause of of you I have my phone back.. Thank you so much
Click to expand...
Click to collapse
please tell me th version of sp tools please
sir please help my my karbonn sparkle is dead after format i have flashed micromax aq4501 rom in it sw kpw53
and also i made backup of my phone using miracle box but all rom i flashed in it but it is not booting not charging it is connecting as
prealoader what should i do which spflash version should i use please help me to unbrick sparkl v
---------- Post added at 07:46 AM ---------- Previous post was at 07:36 AM ----------
puchupechu said:
Dear friends.. thank you all so much. I used different ( latest ) SP flash tools , mmx lollipop Stock and I was fixed.. thank you so much. even the service centre had given up I had no hope and went to local repair shop.. He open my opened my phone and said hardware problem ( warranty void) but could repair the phone... F**k the bastard. NOw it cause of of you I have my phone back.. Thank you so much
Click to expand...
Click to collapse
hey please help me my karbonn sparkle v dead after flash connecting preloader mode i can flash any rom in it i also have backup of
running phone i made backup using miracle box i have flashed backup lollipop kitkat everything for it but it is dead now not booting not charging but connecting as preloader mode what should i do please help me
....hey please help me my karbonn sparkle v dead after flash connecting preloader mode i can flash any rom in it i also have backup of
running phone i made backup using miracle box i have flashed backup lollipop kitkat everything for it but it is dead now not booting not charging but connecting as preloader mode what should i do please help me[/QUOTE]
Refer to the guide
https://forum.xda-developers.com/cr...tion-android-one-hard-bricked-device-t3361988
It might help you
And more, what custom recovery you have in your mobile...if cwm or twrp then did you backed up before flashing ?... You just mentioned you had backed your rom with miracle box so google for procedure to restore the same
karbonn sparkle v dead after format
sir please help me my karbonn sparkle v dead after format i have flashed every firmware in it not booting not charging what should i do i have flashed 927 firmware and 956 firmware for sparkle v and also flashed alive backup of my phone but not booting not charging dead complete detecting as preloader i can flash any firmware in it
sam5514 said:
sir please help me my karbonn sparkle v dead after format i have flashed every firmware in it not booting not charging what should i do i have flashed 927 firmware and 956 firmware for sparkle v and also flashed alive backup of my phone but not booting not charging dead complete detecting as preloader i can flash any firmware in it
Click to expand...
Click to collapse
At this time you must be patient, read every related thread posted in this forum, if your phone detected via pc and even giving connecting sound via proper cable then in any case it will boot, load proper adb drivers, sp flash tool, firmware etc...I already given a link of thread to you in my above post for your help,...did u read it? And remember one thing , sprout never be dead :good: keep on doing things with deep study of related threads :good:
karbonn sparkle v dead after format
my karbonn sparkle v dead after format please tell me right version of spflash tool
sam5514 said:
my karbonn sparkle v dead after format please tell me right version of spflash tool
Click to expand...
Click to collapse
Contact /PM to @netcracker for correct/ updated drivers, sp flashtools who unbricked his sprout recently refer to this thread https://forum.xda-developers.com/cr...p-please-flashing-stock-rom-using-sp-t3594370
Related
my phone was rooted and cwm installed. i tried to flash aura rom and after that it just show sony logo. please help me how to unbrick it?
Use SUS application (Sony Update Service), this will re-install the stock ROM. But note that using this will wipe your internal storage
Here is the download link for the Sony Update Service. http://software.sonymobile.com/insta...-2.13.3.43.exe
this works only for Locked bootloader and it will wipe your internal storage.
just download this application , this is sony update service , select your device in the application and it will flash a stock rom on your device
devabhishek said:
Use SUS application (Sony Update Service), this will re-install the stock ROM. But note that using this will wipe your internal storage
Here is the download link for the Sony Update Service. http://software.sonymobile.com/insta...-2.13.3.43.exe
this works only for Locked bootloader and it will wipe your internal storage.
just download this application , this is sony update service , select your device in the application and it will flash a stock rom on your device
Click to expand...
Click to collapse
Thanks a lot for your reply. I will try it tommorow.
it works i did the same installing another rom which said worked with locked bootloaders but got the sony symbol appear.
it does make you panic tho as it took me a while to figure out how to do it this will help alot of people who think they have bricked there phone.
can anyone flash roms on locked bootloaders?
i can flash sound mods they work fine but not these roms people are making with stock kernals
But why did it brick? Is aura rom not compatible with locked bootloader?
For me too it worked liked a charm. But the Rom wasn't installed don't know why. It was stuck in between.
devabhishek said:
Use SUS application (Sony Update Service), this will re-install the stock ROM. But note that using this will wipe your internal storage
Here is the download link for the Sony Update Service. http://software.sonymobile.com/insta...-2.13.3.43.exe
this works only for Locked bootloader and it will wipe your internal storage.
just download this application , this is sony update service , select your device in the application and it will flash a stock rom on your device
Click to expand...
Click to collapse
download stock rom
flash it in dl mode
bricked
:crying: i had the same problem.......except i was flashing turds rom.......i had root n cwm installed.......when i tried using sus it says that your phone already has updated software pls help
riflesnroses said:
:crying: i had the same problem.......except i was flashing turds rom.......i had root n cwm installed.......when i tried using sus it says that your phone already has updated software pls help
Click to expand...
Click to collapse
Use Flash Tool to flash stock xperia z ftf
Hi,
I had Prime HD 9 on my X8 with stock kernel. I took a backup from my device with CWM 4 and then I had installed the last version of Xperia Soul rom by FoRRoX by a zip file. finally I didn't like it and decided to restore my previous rom, but I had forget to format Data and Cache before restoring. So, after that my phone sucks at startup Sony Ericsson logo and I cannot do anything with that and my device doesn't charge.
I don't know what is the reason and that isn't my first time that I change my rom and I don't know what I can do? I have tried to flash my phone with Androxyde Flash Tool, but I couldn't find a .ftf firmware. Can you help me about this problem ??
:crying::crying::crying::crying::crying::crying::crying:
help
pm1371 said:
Hi,
I had Prime HD 9 on my X8 with stock kernel. I took a backup from my device with CWM 4 and then I had installed the last version of Xperia Soul rom by FoRRoX by a zip file. finally I didn't like it and decided to restore my previous rom, but I had forget to format Data and Cache before restoring. So, after that my phone sucks at startup Sony Ericsson logo and I cannot do anything with that and my device doesn't charge.
I don't know what is the reason and that isn't my first time that I change my rom and I don't know what I can do? I have tried to flash my phone with Androxyde Flash Tool, but I couldn't find a .ftf firmware. Can you help me about this problem ??
:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Please help me ((((((((
pm1371 said:
Hi,
I had Prime HD 9 on my X8 with stock kernel. I took a backup from my device with CWM 4 and then I had installed the last version of Xperia Soul rom by FoRRoX by a zip file. finally I didn't like it and decided to restore my previous rom, but I had forget to format Data and Cache before restoring. So, after that my phone sucks at startup Sony Ericsson logo and I cannot do anything with that and my device doesn't charge.
I don't know what is the reason and that isn't my first time that I change my rom and I don't know what I can do? I have tried to flash my phone with Androxyde Flash Tool, but I couldn't find a .ftf firmware. Can you help me about this problem ??
:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
You can see this link to know how to flash stock rom: http://forum.xda-developers.com/showthread.php?t=1481630
and this link for stock rom: http://forum.xda-developers.com/showthread.php?p=29907849#post29907849
just use the sony ericsson update service ..
you will surely get your phone back
Thanks guys. Ihave flashed my phone with 2.1.1.A.0.6_Baseband_15 and it shows that flashing process is complete, but my phone sucks in logo again. I have attached Flash Tool log. So can you help me that where is the problem and what I should do after flashing process? Thanks again.
pm1371 said:
Thanks guys. Ihave flashed my phone with 2.1.1.A.0.6_Baseband_15 and it shows that flashing process is complete, but my phone sucks in logo again. I have attached Flash Tool log. So can you help me that where is the problem and what I should do after flashing process? Thanks again.
Click to expand...
Click to collapse
hmm it's a long time i haven't used flash tool so i can't remember exactly. you can read this thread and do it step by step: http://forum.xda-developers.com/showthread.php?t=1481630
remember to install flashtool drivers.exe in the drivers folder. good luck!!!
pm1371 said:
Thanks guys. Ihave flashed my phone with 2.1.1.A.0.6_Baseband_15 and it shows that flashing process is complete, but my phone sucks in logo again. I have attached Flash Tool log. So can you help me that where is the problem and what I should do after flashing process? Thanks again.
Click to expand...
Click to collapse
Try Flashing this file via FlashTool:
http://www.mediafire.com/download/6rmr0olxp8auxdm/E15a_Android2.1_OFW.ftf
i used tw recovery to wipe all my phone data but i did not flash a rom instead i rebooted the phone & now it's stock on the Sony logo. & the recovery has gone
i used flashtool to flash new recovery but it say the device must be rooted ???
how and there is nothing on the phone no sys no rec nothing at all
what i must do help
Hello,
Welcome to XDA.
To better assist you, your thread will be moved to your device Q&A forum. The experts there may be able to help you. Good luck.
You must flash full stock ftf file.
Flashtool says you must be rooted because you dont have your bootloader unlocked!
eyadmando32 said:
i used tw recovery to wipe all my phone data but i did not flash a rom instead i rebooted the phone & now it's stock on the Sony logo. & the recovery has gone
i used flashtool to flash new recovery but it say the device must be rooted ???
how and there is nothing on the phone no sys no rec nothing at all
what i must do help
Click to expand...
Click to collapse
I think this video will help you.
https://youtu.be/XRf987Ki2rk
Hi,
Please could you help me to find a solution for my infinix hot 2 it's now in a loop boot after I update it (from android I didn't flash any rom) to marshmallow.
I tried recovery mode (volume up + power when logo appears click/holdclick volume up ) but doesn't work seems like a security update make the recovery mode workable only after flash the phone please is there a solution to get into recovery mode?
U cud do a clean flash with sp flashtool by flashing this 6.0 backup
https://drive.google.com/file/d/0B1ukKq9qHhpBZXN2SFhBMWMyY2c/view am sure ur familiar with sp flashtool.
Sent from my Infinix X510 using Tapatalk
Flash manual again via stock recovery
kim13 said:
Hi,
Please could you help me to find a solution for my infinix hot 2 it's now in a loop boot after I update it (from android I didn't flash any rom) to marshmallow.
I tried recovery mode (volume up + power when logo appears click/holdclick volume up ) but doesn't work seems like a security update make the recovery mode workable only after flash the phone please is there a solution to get into recovery mode?
Click to expand...
Click to collapse
It appears you ran an OTA update on a rooted phone. That'll definitely brick your Hot 2.
All you need to do is either flash back the Lollipop firmware or the Marshmallow ROMDump we created.
Would be happy to guide you through fixing it if you can get a PC
Hovatek said:
It appears you ran an OTA update on a rooted phone. That'll definitely brick your Hot 2.
All you need to do is either flash back the Lollipop firmware or the Marshmallow ROMDump we created.
Would be happy to guide you through fixing it if you can get a PC
Click to expand...
Click to collapse
Thank you a lot for your answer I have a pc actually but I don't know what steps I should follow.
The phone can't be detected by pc because I can't access Recovery mode
Merlve said:
U cud do a clean flash with sp flashtool by flashing this 6.0 backup
I' am sure ur familiar with sp flashtool.
Sent from my Infinix X510 using Tapatalk
Click to expand...
Click to collapse
Thank you for the answer I will try it !
kim13 said:
Thank you a lot for your answer I have a pc actually but I don't know what steps I should follow.
The phone can't be detected by pc because I can't access Recovery mode
Click to expand...
Click to collapse
Not to worry about.
Before we proceed, would you prefer Lollipop or Marshmallow running on your phone
Hovatek said:
Not to worry about.
Before we proceed, would you prefer Lollipop or Marshmallow running on your phone
Click to expand...
Click to collapse
Thank you so much for the help I found out how to flash the phone thanks to Merlen and using the rom you posted. Thanks
please I need help on my infinix x551 which is bricked. I flashed a custom rom and run system update and got the phone bricked. I boot ino recovery twrp v2.8.5.0 , tried flashing new rom but did not work so I flashed a different recovery twrp v2.8.1.0 , now the phone does not show sd card and I'm unable to mount to pc. I tried using sp flash tools but it is recognised by the pc. sd -ext shows current file system as auto and phone has no rom as well. kindly help me
Unfortunately i was playing and mistakenly flashed yu yuphoria's rom on mmx canvas a1 aka aq4501...then my phone wasnt turning on.. I performed stock lp flash via sp flash tool.. Still no improvement.. So i though maybe PRELOADER.BIN got exchanged.. So i performed a format using sp flash tool.. Then reflashed stock lp... Still no improvement.. I lost PMT, PRELOADER.BIN .. As my phone isnt turning on so i cant boot into recovery or bootloader.. Actually its hard bricked i guess.. So i need help, how can i solve it... Or i will need a MTK backup for aq4501 included preloader and pmt.. Help me plz
Service center
Softwarelord said:
bhai main bola tha service center jaa mtk ka preloader rom ke saath rahta hai.... @softwarelord
Click to expand...
Click to collapse
How to get preloader files from rom??? I have same problem for my Huawei honor holly. Everything has messed up. Download stock rom in rar file, but how can i use this stock rom using SP flash tool?? Step by step instruction needed.. Thankx..