Related
my phone was rooted and cwm installed. i tried to flash aura rom and after that it just show sony logo. please help me how to unbrick it?
Use SUS application (Sony Update Service), this will re-install the stock ROM. But note that using this will wipe your internal storage
Here is the download link for the Sony Update Service. http://software.sonymobile.com/insta...-2.13.3.43.exe
this works only for Locked bootloader and it will wipe your internal storage.
just download this application , this is sony update service , select your device in the application and it will flash a stock rom on your device
devabhishek said:
Use SUS application (Sony Update Service), this will re-install the stock ROM. But note that using this will wipe your internal storage
Here is the download link for the Sony Update Service. http://software.sonymobile.com/insta...-2.13.3.43.exe
this works only for Locked bootloader and it will wipe your internal storage.
just download this application , this is sony update service , select your device in the application and it will flash a stock rom on your device
Click to expand...
Click to collapse
Thanks a lot for your reply. I will try it tommorow.
it works i did the same installing another rom which said worked with locked bootloaders but got the sony symbol appear.
it does make you panic tho as it took me a while to figure out how to do it this will help alot of people who think they have bricked there phone.
can anyone flash roms on locked bootloaders?
i can flash sound mods they work fine but not these roms people are making with stock kernals
But why did it brick? Is aura rom not compatible with locked bootloader?
For me too it worked liked a charm. But the Rom wasn't installed don't know why. It was stuck in between.
devabhishek said:
Use SUS application (Sony Update Service), this will re-install the stock ROM. But note that using this will wipe your internal storage
Here is the download link for the Sony Update Service. http://software.sonymobile.com/insta...-2.13.3.43.exe
this works only for Locked bootloader and it will wipe your internal storage.
just download this application , this is sony update service , select your device in the application and it will flash a stock rom on your device
Click to expand...
Click to collapse
download stock rom
flash it in dl mode
bricked
:crying: i had the same problem.......except i was flashing turds rom.......i had root n cwm installed.......when i tried using sus it says that your phone already has updated software pls help
riflesnroses said:
:crying: i had the same problem.......except i was flashing turds rom.......i had root n cwm installed.......when i tried using sus it says that your phone already has updated software pls help
Click to expand...
Click to collapse
Use Flash Tool to flash stock xperia z ftf
Hi,
I had Prime HD 9 on my X8 with stock kernel. I took a backup from my device with CWM 4 and then I had installed the last version of Xperia Soul rom by FoRRoX by a zip file. finally I didn't like it and decided to restore my previous rom, but I had forget to format Data and Cache before restoring. So, after that my phone sucks at startup Sony Ericsson logo and I cannot do anything with that and my device doesn't charge.
I don't know what is the reason and that isn't my first time that I change my rom and I don't know what I can do? I have tried to flash my phone with Androxyde Flash Tool, but I couldn't find a .ftf firmware. Can you help me about this problem ??
:crying::crying::crying::crying::crying::crying::crying:
help
pm1371 said:
Hi,
I had Prime HD 9 on my X8 with stock kernel. I took a backup from my device with CWM 4 and then I had installed the last version of Xperia Soul rom by FoRRoX by a zip file. finally I didn't like it and decided to restore my previous rom, but I had forget to format Data and Cache before restoring. So, after that my phone sucks at startup Sony Ericsson logo and I cannot do anything with that and my device doesn't charge.
I don't know what is the reason and that isn't my first time that I change my rom and I don't know what I can do? I have tried to flash my phone with Androxyde Flash Tool, but I couldn't find a .ftf firmware. Can you help me about this problem ??
:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Please help me ((((((((
pm1371 said:
Hi,
I had Prime HD 9 on my X8 with stock kernel. I took a backup from my device with CWM 4 and then I had installed the last version of Xperia Soul rom by FoRRoX by a zip file. finally I didn't like it and decided to restore my previous rom, but I had forget to format Data and Cache before restoring. So, after that my phone sucks at startup Sony Ericsson logo and I cannot do anything with that and my device doesn't charge.
I don't know what is the reason and that isn't my first time that I change my rom and I don't know what I can do? I have tried to flash my phone with Androxyde Flash Tool, but I couldn't find a .ftf firmware. Can you help me about this problem ??
:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
You can see this link to know how to flash stock rom: http://forum.xda-developers.com/showthread.php?t=1481630
and this link for stock rom: http://forum.xda-developers.com/showthread.php?p=29907849#post29907849
just use the sony ericsson update service ..
you will surely get your phone back
Thanks guys. Ihave flashed my phone with 2.1.1.A.0.6_Baseband_15 and it shows that flashing process is complete, but my phone sucks in logo again. I have attached Flash Tool log. So can you help me that where is the problem and what I should do after flashing process? Thanks again.
pm1371 said:
Thanks guys. Ihave flashed my phone with 2.1.1.A.0.6_Baseband_15 and it shows that flashing process is complete, but my phone sucks in logo again. I have attached Flash Tool log. So can you help me that where is the problem and what I should do after flashing process? Thanks again.
Click to expand...
Click to collapse
hmm it's a long time i haven't used flash tool so i can't remember exactly. you can read this thread and do it step by step: http://forum.xda-developers.com/showthread.php?t=1481630
remember to install flashtool drivers.exe in the drivers folder. good luck!!!
pm1371 said:
Thanks guys. Ihave flashed my phone with 2.1.1.A.0.6_Baseband_15 and it shows that flashing process is complete, but my phone sucks in logo again. I have attached Flash Tool log. So can you help me that where is the problem and what I should do after flashing process? Thanks again.
Click to expand...
Click to collapse
Try Flashing this file via FlashTool:
http://www.mediafire.com/download/6rmr0olxp8auxdm/E15a_Android2.1_OFW.ftf
Hey guys,
Please help me out I had first soft bricked my phone bcoz of chainfire 3d I had stock ROM and no custom recovery at that time so I tried to flash rom through sp flash tools that rom was of same company and same specs but it didnt worked out.So I just need someone to upload his gionee m2 firmware through mtkDroid tools with all the scatter file so I can re-flash properly Please please help I am in big trouble.
UPDATE:
I Unbricked my gionee m2 thanks to avi3230 sir.I will soon upload the files for unbricking the phone.Check out my post here http://forum.xda-developers.com/android/help/how-to-unbrick-gionee-m2-device-t2816697
[deleted]
afhn_ said:
great, thanks
Click to expand...
Click to collapse
You know your reply is rather rude, and not helpful at all.
Someone breaks his phone and you say great?
Sent from my GT-I9001 Gadget of Mass Destruction with CM11 using XDA Developers App.
null
Gg_hacker said:
Hey guys,
Please help me out I had first soft bricked my phone bcoz of chainfire 3d I had stock ROM and no custom recovery at that time so I tried to flash rom through sp flash tools that rom was of same company and same specs but it didnt worked out.So I just need someone to upload his gionee m2 firmware through mtkDroid tools with all the scatter file so I can re-flash properly Please please help I am in big trouble.
UPDATE:
I Unbricked my gionee m2 thanks to avi3230 sir.I will soon upload the files for unbricking the phone.
Click to expand...
Click to collapse
Please im in the same problem with my gionee M2, kindly help upload the firmware and flashtool you used, Thanks
Okh so guys here the solution ..for ur prob ...
1 .stock ROM
https://mega.co.nz/#!oFY2BRZb!AzH16G5H2RFTqVHRpnv-53ffTXRBK2D0vQOyUk9U_Es
2.sp flash tool
https://mega.co.nz/#!hcoTgaBI!NSPaGUAz3lPqHddZMXjStZNfzzMyxWdpmHbjZEiwLEM
3. Scatter file.
https://app.box.com/s/fiqf6r251roqypwaplti
Hit thanks if it help u
If u wanna join gionee m2 Whatsapp group for instant help guys u can msg
9650122041 on Whatsapp for joining..
New custom ROM added for gionee m2 ..here
Also complete process of root ,cwm
http://forum.xda-developers.com/showthread.php?t=2822910
..
Hi pls I want to join gionee m3 group....my number is +2348189715230
Sent from my TECNO M3 using XDA Premium 4 mobile app
Its group of m2 not m3 bro
Sent from my M2 using Tapatalk
Please help
My gionee M2 gets stuck in boot animation after several boot loops of the red gionee logo 8-10 times . I tried to use sp flash and scatter file and it gives PMT CHANGED FOR ROM EERROR IT MUST BE DOWNLOAD. IT FLASHES 100% IN lower sp flash version without errors, but it still gets stuck in bootanimation after flash.
femysmart1 said:
Please help
My gionee M2 gets stuck in boot animation after several boot loops of the red gionee logo 8-10 times . I tried to use sp flash and scatter file and it gives PMT CHANGED FOR ROM EERROR IT MUST BE DOWNLOAD. IT FLASHES 100% IN lower sp flash version without errors, but it still gets stuck in bootanimation after flash.
Click to expand...
Click to collapse
and did you wipe data/factry reset in recovery mode?
femysmart1 said:
Please help
My gionee M2 gets stuck in boot animation after several boot loops of the red gionee logo 8-10 times . I tried to use sp flash and scatter file and it gives PMT CHANGED FOR ROM EERROR IT MUST BE DOWNLOAD. IT FLASHES 100% IN lower sp flash version without errors, but it still gets stuck in bootanimation after flash.
Click to expand...
Click to collapse
give i quite some time to boot into home screen. if stuck for up to 5 mins then wipe data/factory reset
My karbonn sparkle v is dead/breaked.
I i was on cm12.1, then i thought of flashing the factroy firmware 4.4.4 .
Accordingly i flashed the stock firmware with sp flash tools. At, first it was stuck for a long time then i removed the usb flashed again with the battery on.
The flashing was ok "download ok" but my phone doesn't switch on and is completely dead. I flashed many times with download ok status but still my phone is dead.
I'm in urgent need of the guidance of the expert developers so that i can unbrick my phone. I'm phone-less now.
did you tried different firmware? Can you go to the recovery? Or even to fastboot?
puchupechu said:
My karbonn sparkle v is dead/breaked.
I i was on cm12.1, then i thought of flashing the factroy firmware 4.4.4 .
Accordingly i flashed the stock firmware with sp flash tools. At, first it was stuck for a long time then i removed the usb flashed again with the battery on.
The flashing was ok "download ok" but my phone doesn't switch on and is completely dead. I flashed many times with download ok status but still my phone is dead.
I'm in urgent need of the guidance of the expert developers so that i can unbrick my phone. I'm phone-less now.
Click to expand...
Click to collapse
I had exactly the same problem. even my phone was dead for a day, the problem was that i was using older version of sp flash tools
please check if you are using correct version of sp flash tools.
download sp flash tools, drivers and firmware from moulinsky website.
Hit thanks if it helps.:good:
Try to use a different version of SP flash tools. Also try to flash a different ROM. OR TRY THIS >>>> Just download the official firmware and copy all the image files in the adb/fastboot folder and flash them one by one. secro.img may not flash. You will have your phone up and running but IMEI may be invalid. So there is a thread which tells you to make "mp0b_001" file which carries IMEI and just copy-paste and restarting will do the job. These can be the steps easily followed by a noob (like me ) This will fix your phone or atleast Android one phones. Good luck.
can u access fastboot or recovery
puchupechu said:
My karbonn sparkle v is dead/breaked.
I i was on cm12.1, then i thought of flashing the factroy firmware 4.4.4 .
Accordingly i flashed the stock firmware with sp flash tools. At, first it was stuck for a long time then i removed the usb flashed again with the battery on.
The flashing was ok "download ok" but my phone doesn't switch on and is completely dead. I flashed many times with download ok status but still my phone is dead.
I'm in urgent need of the guidance of the expert developers so that i can unbrick my phone. I'm phone-less now.
Click to expand...
Click to collapse
can u access fastboot or recovery
Use lastest version of sp tool & solve the problm.. I was also face that issue..
Problem Solved
Dear friends.. thank you all so much. I used different ( latest ) SP flash tools , mmx lollipop Stock and I was fixed.. thank you so much. even the service centre had given up I had no hope and went to local repair shop.. He open my opened my phone and said hardware problem ( warranty void) but could repair the phone... F**k the bastard. NOw it cause of of you I have my phone back.. Thank you so much
puchupechu said:
Dear friends.. thank you all so much. I used different ( latest ) SP flash tools , mmx lollipop Stock and I was fixed.. thank you so much. even the service centre had given up I had no hope and went to local repair shop.. He open my opened my phone and said hardware problem ( warranty void) but could repair the phone... F**k the bastard. NOw it cause of of you I have my phone back.. Thank you so much
Click to expand...
Click to collapse
Feeling great that I was able to help you :laugh::laugh::laugh:
please help me i have same problem in karbon sparkle v
puchupechu said:
My karbonn sparkle v is dead/breaked.
I i was on cm12.1, then i thought of flashing the factroy firmware 4.4.4 .
Accordingly i flashed the stock firmware with sp flash tools. At, first it was stuck for a long time then i removed the usb flashed again with the battery on.
The flashing was ok "download ok" but my phone doesn't switch on and is completely dead. I flashed many times with download ok status but still my phone is dead.
I'm in urgent need of the guidance of the expert developers so that i can unbrick my phone. I'm phone-less now.
Click to expand...
Click to collapse
i have done Format All + Download using sp flash tool afterwards phone not booting not showing charging but recognised with sp flash tool... flashing is successful with its stock firmware but phone not booting please help me
can you please post the links
please tell me the version of sp tool
puchupechu said:
Dear friends.. thank you all so much. I used different ( latest ) SP flash tools , mmx lollipop Stock and I was fixed.. thank you so much. even the service centre had given up I had no hope and went to local repair shop.. He open my opened my phone and said hardware problem ( warranty void) but could repair the phone... F**k the bastard. NOw it cause of of you I have my phone back.. Thank you so much
Click to expand...
Click to collapse
please tell me th version of sp tools please
sir please help my my karbonn sparkle is dead after format i have flashed micromax aq4501 rom in it sw kpw53
and also i made backup of my phone using miracle box but all rom i flashed in it but it is not booting not charging it is connecting as
prealoader what should i do which spflash version should i use please help me to unbrick sparkl v
---------- Post added at 07:46 AM ---------- Previous post was at 07:36 AM ----------
puchupechu said:
Dear friends.. thank you all so much. I used different ( latest ) SP flash tools , mmx lollipop Stock and I was fixed.. thank you so much. even the service centre had given up I had no hope and went to local repair shop.. He open my opened my phone and said hardware problem ( warranty void) but could repair the phone... F**k the bastard. NOw it cause of of you I have my phone back.. Thank you so much
Click to expand...
Click to collapse
hey please help me my karbonn sparkle v dead after flash connecting preloader mode i can flash any rom in it i also have backup of
running phone i made backup using miracle box i have flashed backup lollipop kitkat everything for it but it is dead now not booting not charging but connecting as preloader mode what should i do please help me
....hey please help me my karbonn sparkle v dead after flash connecting preloader mode i can flash any rom in it i also have backup of
running phone i made backup using miracle box i have flashed backup lollipop kitkat everything for it but it is dead now not booting not charging but connecting as preloader mode what should i do please help me[/QUOTE]
Refer to the guide
https://forum.xda-developers.com/cr...tion-android-one-hard-bricked-device-t3361988
It might help you
And more, what custom recovery you have in your mobile...if cwm or twrp then did you backed up before flashing ?... You just mentioned you had backed your rom with miracle box so google for procedure to restore the same
karbonn sparkle v dead after format
sir please help me my karbonn sparkle v dead after format i have flashed every firmware in it not booting not charging what should i do i have flashed 927 firmware and 956 firmware for sparkle v and also flashed alive backup of my phone but not booting not charging dead complete detecting as preloader i can flash any firmware in it
sam5514 said:
sir please help me my karbonn sparkle v dead after format i have flashed every firmware in it not booting not charging what should i do i have flashed 927 firmware and 956 firmware for sparkle v and also flashed alive backup of my phone but not booting not charging dead complete detecting as preloader i can flash any firmware in it
Click to expand...
Click to collapse
At this time you must be patient, read every related thread posted in this forum, if your phone detected via pc and even giving connecting sound via proper cable then in any case it will boot, load proper adb drivers, sp flash tool, firmware etc...I already given a link of thread to you in my above post for your help,...did u read it? And remember one thing , sprout never be dead :good: keep on doing things with deep study of related threads :good:
karbonn sparkle v dead after format
my karbonn sparkle v dead after format please tell me right version of spflash tool
sam5514 said:
my karbonn sparkle v dead after format please tell me right version of spflash tool
Click to expand...
Click to collapse
Contact /PM to @netcracker for correct/ updated drivers, sp flashtools who unbricked his sprout recently refer to this thread https://forum.xda-developers.com/cr...p-please-flashing-stock-rom-using-sp-t3594370
Hi guys, i have a serious problem... i flashed this rom ( http://forum.xda-developers.com/k3-note/development/chost-rom-v2-1-lenovo-k3-note-k50-t3398131 ), all was ok, but now everything FC after reboot... and i cant go back to stock, because i cant wipe or reflash recovery, there is PERMANENT TWRP 302-3 which CANT wipe anything or flash anything... what can I do? i tried SP flashtools, but i do something wrong, because it reboots my phone instead of start flashing...
Lenovo K3 Problems All Solve ..
Does any one have K3 lenovo any problems message me or reply I solve any problems..
vins66 said:
Does any one have K3 lenovo any problems message me or reply I solve any problems..
Click to expand...
Click to collapse
Hi
can youhelp me? i already tried SP flashtools, it flash rom normally, says SUCCES but there is still ghost rom (link in 1st post) and still everything FC
What u need do u want new chinese Rom or official Rom ..?
SkopiX said:
Hi
can youhelp me? i already tried SP flashtools, it flash rom normally, says SUCCES but there is still ghost rom (link in 1st post) and still everything FC
Click to expand...
Click to collapse
What u need now do u want to format ,install same ROM gost or other Chinese ROM or want to install Official ROM..?
vins66 said:
What u need now do u want to format ,install same ROM gost or other Chinese ROM or want to install Official ROM..?
Click to expand...
Click to collapse
It doesnt matter, i just need working phone... I preffer stock rom my device is K50-T5
i tried everything, TWRP, SP flashtools... but i cant write anything to this phone, doesnt matter how...
SkopiX said:
It doesnt matter, i just need working phone... I preffer stock rom my device is K50-T5
i tried everything, TWRP, SP flashtools... but i cant write anything to this phone, doesnt matter how...
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=TySRc_DkcFk
go to above link ..
vins66 said:
https://www.youtube.com/watch?v=TySRc_DkcFk
go to above link ..
Click to expand...
Click to collapse
I already tried that... As I sasid, SP flashtool start flashing, all is ok, it says "SUCESS" but when i turn on phone, thre is still ghost rom, TWRP data... everything...
SkopiX said:
I already tried that... As I sasid, SP flashtool start flashing, all is ok, it says "SUCESS" but when i turn on phone, thre is still ghost rom, TWRP data... everything...
Click to expand...
Click to collapse
Problem u may faced is :- u havnt changed Download Agent or Scatter Loading in Spflash tool it's default from ur ghost ROM, to install new ROM change folder from new ROM ..
Backup your data+ IMEI.
Mobile should be rooted , install or flash CWM recovery
if success ,
then , flash spflash tool below link Marshmallow cuckoo92 or via CWM install downloaded zip .
https://www.androidfilehost.com/?fid=24533103863140515
or i dnt knw your stock model indian or chinese version mobile so ,
you can install Official update lolipop Google it u can get via spflash tool then update to Marshmallow don't root mobile untill you get latest updates from Settings update option then root CWM, if invalid IMEI found use chameleon.apk use it IMEI store in ur PC in notepad not in sdcard,
that's it
vins66 said:
Problem u may faced is :- u havnt changed Download Agent or Scatter Loading in Spflash tool it's default from ur ghost ROM, to install new ROM change folder from new ROM ..
Backup your data+ IMEI.
Mobile should be rooted , install or flash CWM recovery
if success ,
then , flash spflash tool below link Marshmallow cuckoo92 or via CWM install downloaded zip .
https://www.androidfilehost.com/?fid=24533103863140515
or i dnt knw your stock model indian or chinese version mobile so ,
you can install Official update lolipop Google it u can get via spflash tool then update to Marshmallow don't root mobile untill you get latest updates from Settings update option then root CWM, if invalid IMEI found use chameleon.apk use it IMEI store in ur PC in notepad not in sdcard,
that's it
Click to expand...
Click to collapse
I have twrp, but it cannot flash anything same as SP flash tools i have chinese k50-t5 +TD LTE so... what can I do next? in the link provided thereis no posibiliti to flash via SP flash tools...
SkopiX said:
I have twrp, but it cannot flash anything same as SP flash tools i have chinese k50-t5 +TD LTE so... what can I do next? in the link provided thereis no posibiliti to flash via SP flash tools...
Click to expand...
Click to collapse
Final Answer:- Remove Twrp and install CWM .
Download ROM below link register free download all types of Roms you get ,flash CWM via adb tools from pc,
if this flash dsnt work, then check data cable, learn how to flash from youtube,
http://www.needrom.com/
if there is no possibility to flash it means you have flash via CWM ,to open boot recovery switch off mobile press volume buttons + power button both u get menu CWM ,search ROM from sdcard and update that zip.
Alternative easy to flash:- CWM
http://bit.ly/1Nj74mK
Download K3 note manager
ok, I downloaded CWM from rootjunkysdl, tried flash via Flashtools, it said succes, but there is still TWRP, tried to flash it using fastboot flash recovery recovery.img, it said done, but there is still TWRP which cant wipe or flash anything...
thank u for all your help and time, please dont abadon me now
SkopiX said:
ok, I downloaded CWM from rootjunkysdl, tried flash via Flashtools, it said succes, but there is still TWRP, tried to flash it using fastboot flash recovery recovery.img, it said done, but there is still TWRP which cant wipe or flash anything...
thank u for all your help and time, please dont abadon me now
Click to expand...
Click to collapse
Have you tried service centre..?
Or a shop..?
adikri said:
Have you tried service centre..?
Or a shop..?
Click to expand...
Click to collapse
I dont know, what you mean...
SkopiX said:
I dont know, what you mean...
Click to expand...
Click to collapse
I mean visit lenovo service centre otherwise a mobile shop..