[Q] Soft Brick/Bootloop I9000 - Galaxy S I9000 Q&A, Help & Troubleshooting

Hey everyone,
I was asked by a friend to update his moms Samsung GT I9000 (stock rom up until now) to Cyanogen.
I've played around with CM before and figured it would be a piece of cake, but I guess I was wrong.
I've followed this guide to the letter:
http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
Used the semaphore .tar mentioned in the thread and used Heimdall to flash.
All went well untill I tried to reboot into recovery, step 10: I get a bootloop.
Normal reboot ends up in a loop as well, but I can access download.
I've tried to reflash semaphore with both Heimdall and odin. Heimdall says it's worked but doenst get rid of the bootloop, Odin just didnt recognize the device at all.
So I figured I would flash something else, but what?
I downloaded CM recovery from this site: http://clockworkmod.com/rommanager but it doesnt have a flashable image as far as I can see. (Odin doesnt think so anyway and creating a .tar file doesnt help).
And when I checked this thread for the original software http://forum.xda-developers.com/showthread.php?t=1640906 the links are broken.
I've also tried the JVU mentioned in this thread http://forum.xda-developers.com/showthread.php?t=2247484 and found it here http://download.chainfire.eu/132/CF-Root/SGS/, no luck.
Last but not least I downloaded Kies in the hopes of changing the USB drivers, allowing Odin to recognize the device, that helped. Now Odin can flash, but I still end up in the same bootloop.
There must be something I'm missing here. Does anyone have any idea what else I can try?
Yoora

Anyone?
I've been searching through the forums and I can find about a 1000 ways to get download mode working again, but not what to flash once you get there....
I'm really hoping to find something today since I'm supposed to give the phone back tomorrow. So any help is greatly appreciated.

I think its firmware issue you need full firmware I mean pda phone. Csc

Related

[Q] Captivate Boot Loop after Odin one click

Hello all and thx in advance.
ATT Captivate batch 1010
I had Cognition 2.3 I think on my phone and it worked great however I wanted to try a different ROM so I attempted to restore my phone to stock using ODIN one click. I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Now I am stuck in a boot loop that either shows the white ATT logo screen flashing every couple seconds or the phone off charge screen re starting every couple seconds.
I bought a USB Jig and it works great so I can get into D/L mode easily but I have tried flashing the stock firmware at least 6 times now using different machines, different ports, different versions of ODIN and I've searched around these forums and others for several hours trying to find a solution. It seems that I needed to erase my user data in recovery mode and removed the lag fix before I did this but it is what it is. I have tried to get to recovery mode to no avail. All I can get to is download mode.
Any ideas on what I should/can do?
any help will be greatly appreciated.
Rob
Aircraft123 said:
I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Click to expand...
Click to collapse
Neither are necessary for Odin use.
ATT Captivate batch 1010
Click to expand...
Click to collapse
I think that you may need to use the Froyo Odin (JI6).
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
CM7
please help, i have the same problem, was flashing back to stock from a serendipit 5.12 so that i could get the 6.0 version... all went as planned until odin said "reset" which was my cue to unplug and that the process was complete.... i unplugged the phone and tried to reboot and now it does exactly as the first post described, at&t logo then black screen, then back to the at&t logo then black screen again... my computer doesnt recognize my phone none of the methods of getting to download screen will work... no matter how many times i pull the sd, sim, and batt, no matter the button combination i use or which order i use them in.... same result... i cant afford a new phone i need help, i will donate also... i knew this stuff was over my head, but "curiosity killed the cat" i guess...
I had the exact same problem. Try this method, it's the one that worked for me when all others failed... But remember to follow it EXACTLY.
1. Pull out the battery.
2. Hold Volume UP+DOWN (Don't let go of them until you see the download screen).
3. Stick in the USB (which is connected to the computer).
4. Put the battery back in.
If not, you might need to get a USB Jig.
That Froyo Odin link worked!
Thanks guys I flashed to Froyo and it worked!
I've since flashed clockwork recovery and gotten Serendipity 6.1
As far as getting into download mode I had to use one of the USB jigs.
I ordered one from the guy who does the rom reviews but you could make one as well.
On another note the new ROM seems to be discharging my battery really fast
Before I start investigating it as a problem I am going to charge it completely then let it discharge completely to calibrate it.
Thanks again guys
Rob
I just fixed mine last night, I had the exact same problem because of the exact same upgrade. What you need to do is get or make a usb jig. There's a couple resources around here for how to do it.
Here's a video showing how to make one:
http://www.youtube.com/watch?v=Rdn5GoRjhn0
Once I got my phone into download mode, I used Darky's ROM Resurrection Edition ( http://forum.xda-developers.com/showthread.php?t=940671 ) to restore my phone. Just scroll down to where it says "Files Needed" and download the Captivate version. Once you have that downloaded, use the jig to put your phone into download mode and follow the directions in the Darky's video (jump to about 2:30 into the video). Once I had my phone booting, I used clockwork to install Serendipity 6.
Hope that helps you as much as it helped me!!
went to radio shack, got all the stuff to make a jig and i was able to get my phone into download mode! now to try darko...... thanks everyone!
odin doesnt reconize phone
which odin3 are you using? 1.7? or the one click to stock?
you mentioned you had the bootloop problem before, so you should be using odin 1.7 with 2.2 stock.
open odin
get phone into download mode with your nice jig
unplug jig and plug in computer
box in odin should turn yellow.
And make sure you have the correct drivers installed. CRUCIAL.
Multiupload links not working
I'm stuck in the same situation as the OP.
I've been trying to use the method mentioned in the quote below, but the multiupload links are not working for me. I've been trying for 2 days to get to these files.
Breakin' Ranh said:
**Another thing, read the whole thing before doing it! If you're not confident whatsoever about this process, don't do it**
1. Download the following:
I897UCJH2 Firmware
password: samsung-firmwares.com
http://www.multiupload.com/B5OFPPOJFZ
512 PIT
http://www.multiupload.com/I5WICSBFJ1
ODIN3
http://www.multiupload.com/DLS7TWUVPY
Click to expand...
Click to collapse
Here's a link to the thread for more clarification:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36I've
Would anyone happen to have these files and be willing to share them?
^
Have u tried the Odin or Heimdall One Clicks in the development stickied thread ??
Sent by XDA Premium App
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
lllll Nova lllll said:
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
Click to expand...
Click to collapse
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
ScruffMcG said:
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
Click to expand...
Click to collapse
If one-clicks aren't working, you might need to grab the full version of Heimdall or Odin and flash a full package. Some of the newer phone builds don't like one-clicks.
^ +1
See this thread...the original Stock i897ucKK4 thread... http://forum.xda-developers.com/showthread.php?p=19587108
Then see post #57 for the regular Odin to use and instructions on what to do with the firmware.
Sent from my SAMSUNG-SGH-I777 using xda premium

[Q] Rooting galaxy s with gingerbread 2.3.3

I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Uh... sounds like something is seriously wrong with your phone dude =\ You should be able to get to d/l mode regardless. Does the phone still work fine otherwise?
Unable to root sgs gingerbread NEJVD
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
samgal111 said:
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
Click to expand...
Click to collapse
Did you try diffrent usb port on your cpu?
also..on the cpu that your using odin to flash , do you have kies installed?
if so make sure it isn't running ( i would uninstall just incase)
see if that helps.
Sent from my i9000t XDA app
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
caribbean_spur said:
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
afalk said:
I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Click to expand...
Click to collapse
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Dorilife said:
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
Click to expand...
Click to collapse
Thanks for the reply! Ok, I finally manage to have the 3button combo work and get into download mode and recovery mode. I want to root, can you tell me if the odin method works on 2.3.3 stock, on I9000T . Also, How can I fully backup my phone. Which android version did you have when you rooted.
Also, I keep reading those very old threads and I was wondering what the latest Odin version is used for 2.3.3.
elita said:
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Click to expand...
Click to collapse
Tried this workaround, but still no luck with Odin. When fone is in download mode, I get the message apling multi-csc...Installing multi-csc then "unable to access system/csc/H3G/system/".Couldnt roll back the os through kies either before I uninstalled it. Any help highly appreciated
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Wrong button combo
caribbean_spur said:
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Click to expand...
Click to collapse
Turns out We/I have been using the wrong button combo for download. Download mode is: Vol DOWN+Home+Power On.!!! Recovery mode is Vol UP+Home+Power On. I used Fuguroot with my stock kernel from RAMAD (senior developer). Flashed with odin & it took LESS THAN 2 MIN! Check out this link here http://forum.xda-developers.com/showthread.php?t=1011901.Hope this helps. Do remember to thank Ramad and Nicademus!
good you figured out
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
rrubio999 said:
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
Click to expand...
Click to collapse
I don't have a galaxy tab, but it should be similliar to my galaxy s. I think your device is NOT bricked. As long as you can get to download mode, your device is NOT bricked. If you can get there, you should try to flash with odin/heimdall again. I think you must have done something wrong in the flashing process. AFAIK the logo is displayed by bootloader (primary), so if nothing went wrong with flashing the secondary one (download mode), you should be able to flash again.

[q] sch i800 please help

SO I TRIED TO ROOT A VERIZON GALAXY 7 TAB THROUGH ODIN, EVERYTHING FLASHED OK, BUT I NOTICED IT DIDN'T REBOOT. SO I UNPLUGED IT AND POWERED IT ON THE SAMSUNG LOGO CAME UP, GOT A BLACK SCREEN AND THEN THE FLASH COMES ON AND STAYS ON CONSTANT. I AM ABLE TO TO GO INTO DOWNLOAD MODE. BUT NOTHING I HAVE TRIED HAS WORKED. I HAVE SEARCHED FOR TWO DAYS NOW. I AM NOT SURE IF I HAVE THE WRONG FILES OR WHAT.
IT'S A VERIZON TAB IT WAS RUNNING 2.3.5 STOCK. IF SOMEONE COULD HELP OR SHOOT ME IN THE RIGHT DIRECTION IT WOULD BE APPRECIATED. THANKS FOR ALL TEH HARD WORK YOU GUYS DO HERE
Why are you SHOUTING????????????????????????????????????????????
With regards to your question, please dude use some common sense when asking for help.
Which rom did you use?
What instructions did you follow?
Which part did you get upto?
Have you tried flash again?
sorry i was at work we always use capitals. i was on the stock rom still, i was trying to flash cf-rootxx_oxa_jvs-v4.1-cwm3rfs.tar through odin. forget were we found it. used the stock pit file, tab went through flashed passed , but never rebooted, so now i am trying to flash the stock pit and tar file(wich i deleted and can't find again) but it won't comunicate with odin, it will go into townload mode only when the tab is plugged into a wall socket. i am gonna try and find the files again and see if it will take the flash. thanks again
please help
still stuck in no mans land cant find any solution

[Q] Flashing keeps failing, Out of idea's.

Hello Guys,
I'm quite an intensive flasher and never had a problem ever, running lovely ICS at the moment and my phone is fine. But here's the problem, a friend of mine also has a SGS and hers suddenly got stuck in a bootloop today (she had stock on it, never did anything to it and had no flashing history or something). So I said, let me try to fix, I should be able to reflash the software and it should be working again. Sadly enough, it didn't go as I hoped.
I flashed JVU trough Odin with Pit file.
(Sadly enough I am not allowed to post pictures, goo.gl/28pPX < pic link)
And as you can see, No problems there. Everything went fine. So the phone boots, and then this happens:
goo.gl/D0vnU
This happens everytime, no matter what i try to flash. First time I have ever seen this and I just don't know what do with it..
When I try to reboot the phone it just starts bootlooping again. I'm clueless, so can anyone help me with this ?
Thanks in advance!
Stoux
I would just flash the same jvu but with bootloaders
Sent from my GT-I9000 using Tapatalk
Try to flash this rom is one of the best Gingerbread roms, just follow all the instructions there.
good luck
You say : flashed jvu through odin...did you have 3 files(phone , modem ,cscand odin pit file) and have repartition checkbox ticked in odin?? and can you get phone into download mode???
Stoux2 said:
Hello Guys,
I'm quite an intensive flasher and never had a problem ever, running lovely ICS at the moment and my phone is fine. But here's the problem, a friend of mine also has a SGS and hers suddenly got stuck in a bootloop today (she had stock on it, never did anything to it and had no flashing history or something). So I said, let me try to fix, I should be able to reflash the software and it should be working again. Sadly enough, it didn't go as I hoped.
I flashed JVU trough Odin with Pit file.
(Sadly enough I am not allowed to post pictures, goo.gl/28pPX < pic link)
And as you can see, No problems there. Everything went fine. So the phone boots, and then this happens:
goo.gl/D0vnU
This happens everytime, no matter what i try to flash. First time I have ever seen this and I just don't know what do with it..
When I try to reboot the phone it just starts bootlooping again. I'm clueless, so can anyone help me with this ?
Thanks in advance!
Stoux
Click to expand...
Click to collapse
You just have to find a small file called " dbdata.rfs " amd flash it through odin (in pda ) .
Or you can always download a full firmware which have four files .pit, csc, modem, code and flash them with odin and u will be good to go!
Sorry for the late reaction (and the bump of the thread).
I did flash trough odin, like 9001 times. Everytime I would just get into a bootloop, Stock or Custom Rom. I was able to get in CWM but that was just a mess. It had to do with a faulty SD-Card or something, its @ Samsung now. Anyways, thanks for the help everbody!

Please help! I think I bricked my phone?

I have a Rogers captivate 2.3.3.
I tried super one click but it kept crashing on my computer, so I followed this,
A youtube video where I applied a .tar file. (I cant post the link as the forum wont let me. it was file I897UCKF1-AutoRoot-DesignGears.tar)
I ran that, and now my phone is in a boot loop... It will boot up saying AT&T, and then Rogers, then boot into the OS and then reboot.
I did not take a backup either.
Please help!
I know I know, I should have done more research!!!
TwiztedTD said:
I have a Rogers captivate 2.3.3.
I tried super one click but it kept crashing on my computer, so I followed this,
A youtube video where I applied a .tar file. (I cant post the link as the forum wont let me. it was file I897UCKF1-AutoRoot-DesignGears.tar)
I ran that, and now my phone is in a boot loop... It will boot up saying AT&T, and then Rogers, then boot into the OS and then reboot.
I did not take a backup either.
Please help!
I know I know, I should have done more research!!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1481526
then
http://forum.xda-developers.com/showthread.php?t=1351224
finally
http://forum.xda-developers.com/showthread.php?t=979133
I like it when I can answer with all links, yet they say the latter.
But hope this helps.
Hello, I read the links you gave me,
The first one I see is explaning what hard brick, soft brick, and boot loop?
The second link I see says how to get into download mode?
And the trhid one, im not sure which file im supposed to running, or what steps im supposed to take.
Odin one click packages near the bottom of the post:
I'm not on rogers but I would go with the 2.3.3 gingerbread w/ bootloader in your case.
Please read what you are doing, read read read. Because flashing the bootloader is taking a higher risk. Good luck.
Have you tried reflashing the kernel? Have you tried flashing back to the stock kernel?
That kernel isn't made to boot. It a kernel that installs binaries and and the SU app
I'm a rogers user and using TRusselos one clicks don't seem to like my phone. The full odin flashable gingerbread package w/bootloaders worked for me. If you are still able to get into download mode, try that package, then from there, the vol down + power will be the button combo for download mode. I would also gather the ".tar" versions of the corn kernels, mainly 6.03 and 7.06 or 7.0A for further flashing purposes and because they are great kernels. Oh yeah, get a jig, from conexxion2005, they're really handy.
From the land of defrag
Odin is too complicated
And it never worked for me.
Heimdall on the other hand worked right off the bat.
So try Heimdall packaged ROMs, or one-click-Heimdall ROMs - Apex and SauromKK4.

Categories

Resources