Hey Everyone,
I'm new to this site. I'm using Odin to restore my AT&T Galaxy S5 back to stock and am running into a problem. I can get the stock ROM to apply to the phone with no problems. But when the phone reboots and I get to the Samsung splash screen, the graphic freezes and then the screen goes black.
I've gone into recovery mode on the device and did a factory reset/data wipe and cache wipe before applying the new ROM and am still having the issue.
Here is my device info I'm getting from Odin Mode:
Device: SM-G900A
Current Binary: Samsung Official
System Status: Custom
Reactivation Lock(KK): OFF
Knox Warranty Void: 0x0
Qualcomm Secureboot: Enable (CSB)
AP SWREV: S1, T1, A1, A2, P1
Secure Download: Enable
UDC Start
I'm also getting the unlocked padlock on boot with the words "Custom" below it.
Thanks in advance!
-Steve
Which file are you using to downgrade?
archie87 said:
Which file are you using to downgrade?
Click to expand...
Click to collapse
Hey Archie, thanks for the reply!
Here are the files I've tried:
AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5
G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5
Neither of them work and I end up with the same result.
Thanks!
-Steve
If you are on Official 5.0 OTA DO NOT try this! Will only work on 4.4.2 & 4.4.4.
Your are using the wrong files. Do this,
Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Use the file that the other user posted. I had the same issue that you describe and flashing that file fixed it.
Thank you for the help! I am downloading the file now, and am not on OTA 5.0. I was on OTA 4.4.4 with root and could not get the 5.0 OTA to install. I removed root and recovery and then tried to flash back to stock with the incorrect files. I will let you know the status of my install after I've downloaded the file you've provided me.
Thanks again!
-Steve
SteveKosier said:
Thank you for the help! I am downloading the file now, and am not on OTA 5.0. I was on OTA 4.4.4 with root and could not get the 5.0 OTA to install. I removed root and recovery and then tried to flash back to stock with the incorrect files. I will let you know the status of my install after I've downloaded the file you've provided me.
Thanks again!
-Steve
Click to expand...
Click to collapse
I'm assuming you used the Safestrap method?
archie87 said:
I'm assuming you used the Safestrap method?
Click to expand...
Click to collapse
Yeah, I did.
The file downloaded, but I can't extract it. The file is corrupt......trying again.
Thanks,
-Steve
No luck with the provided file. I can't extract it because it's corrupt.
SteveKosier said:
No luck with the provided file. I can't extract it because it's corrupt.
Click to expand...
Click to collapse
Let me try it on my end. Will let you know shortly.
---------- Post added at 11:35 AM ---------- Previous post was at 11:20 AM ----------
SteveKosier said:
No luck with the provided file. I can't extract it because it's corrupt.
Click to expand...
Click to collapse
Downloaded and extracted just fine! I am using winrar.
Waiting4MyAndroid said:
Let me try it on my end. Will let you know shortly.
---------- Post added at 11:35 AM ---------- Previous post was at 11:20 AM ----------
Downloaded and extracted just fine! I am using winrar.
Click to expand...
Click to collapse
I am too. Really strange.
I'll try it for a 3rd time.
SteveKosier said:
I am too. Really strange.
I'll try it for a 3rd time.
Click to expand...
Click to collapse
Try using a different browser to download the file if it's still corrupted.
Trying in IE rather than Chrome.
File downloaded through IE, and I have successfully got my phone operational again.
Thank you for all your help!!!
SteveKosier said:
File downloaded through IE, and I have successfully got my phone operational again.
Thank you for all your help!!!
Click to expand...
Click to collapse
Glad to hear it!
Related
I didn't flash these files because I'm running hyperdrive and I like my set up. Whoever uses these odin files can let everyone know if they're 100% working or if they have any problems.
https://docs.google.com/uc?id=0B6Lj6PgrbSjibXdaTFlRSWw4NVk&export=download
dkeepitabuck said:
I didn't flash these files because I'm running hyperdrive and I like my set up. Whoever uses these odin files can let everyone know if they're 100% working or if they have any problems.
https://docs.google.com/uc?id=0B6Lj6PgrbSjibXdaTFlRSWw4NVk&export=download
Click to expand...
Click to collapse
Where did you find these because I posted these a little earlier than your post same exact file name?
http://forum.xda-developers.com/galaxy-s4-active/help/link-to-sgh-i537-stock-4-4-odin-files-t2823709
dynamiclynk said:
Where did you find these because I posted these a little earlier than your post same exact file name?
http://forum.xda-developers.com/galaxy-s4-active/help/link-to-sgh-i537-stock-4-4-odin-files-t2823709
Click to expand...
Click to collapse
It's a coincidence that we had the same files. Well my friend Dung (pronounced Young) sent me a link through my email.
Confirmed
Just recovered from a soft brick with them. phone working fine
YAY 4.4 ODIN!!!
firestorm942 said:
Just recovered from a soft brick with them. phone working fine
YAY 4.4 ODIN!!!
Click to expand...
Click to collapse
Nice! :good:
Worked with no problems!
Flashed all 4 files using Odin 3.07 over stock, unrooted, NC9 OTA , which in turn I had flashed over stock, unrooted, ML2 through stock recovery. I had used the same Odin 3.07 to flash ML2 over MF3 (which came with the phone).
I had rooted the MF3 and installed Safestrap on it at some point. Once I decided a couple of days ago to try to upgrade all the way to NE3, I uninstalled Safestrap, all other programs I had installed and unrooted with SuperSu and did a factory reset in preparation for the ML2 flash with Odin (the phone still said custom when it booted after that, but once I flashed the ML2 Odin files, the phone was back to the stock boot animation).
I actually was stuck on the stock, unrooted, NC9 yesterday because after trying to flash the NE3 OTA through the stock recovery, the OTA seemed to be applied, but upon reboot the phone was still at NC9? And today, the solution! Thanks to all involved!:good:
By the way, I checked my knox counter when I entered Download (Odin) Mode before I flashed NE3 and it was at 0x0, so it seems that neither rooting nor installing Safestrap on MF3 changed the knox counter to 0x1
Next step, root with Towelroot, see how that goes (Thank you Geohot!):good:
flashed successfully from nc9. working phone, data, GPS and camera.
Can anybody who has successfully flashed this package post the MD5 for the zip file? I want to make sure people are not trying to flash a corrupt file.
Devo7v said:
Can anybody who has successfully flashed this package post the MD5 for the zip file? I want to make sure people are not trying to flash a corrupt file.
Click to expand...
Click to collapse
If you tell me how get the MD5 from it, I'll give it a try.
Devo7v said:
Can anybody who has successfully flashed this package post the MD5 for the zip file? I want to make sure people are not trying to flash a corrupt file.
Click to expand...
Click to collapse
I found a program by the name of MD5 Checker V4.0.0. This is the MD5 that it gave me: 59E84894B0C760E21955F1194392E61A
this porgram for android phones md5
Sent from my SAMSUNG-SGH-I537 using XDA Free mobile app
tet1 said:
this porgram for android phones md5
Sent from my SAMSUNG-SGH-I537 using XDA Free mobile app
Click to expand...
Click to collapse
If your question was about my last post where I posted the MD5 for the SGH-I537UCUCNE3_v4.4.2_ATT_ALL.zip file that I got using the program Checker V4.0.0.? The program is a Windows program, not an Android App.
yes I know that windows program and I said md5 file for android Samsung phobes not program app ... and the odin files 4.4.2 NE3 worked good without problems
Sent from my SAMSUNG-SGH-I537 using XDA Free mobile app
gcam1964 said:
59E84894B0C760E21955F1194392E61A
Click to expand...
Click to collapse
59e84894b0c760e21955f1194392e61a confirmed using Microsoft File Checksum Integrity Verifier v2.05
OK, I'm in over my head I have i537ucucne3. I flashed s5 conversion v5+ deodex_me. I'm a noob and I didn't make a back up first. Now I just want to get back to stock. If I flash the firmware in this thread, will that put me back to stock? Any help is much appreciated , please, and thank you.
jeffrausa said:
OK, I'm in over my head I have i537ucucne3. I flashed s5 conversion v5+ deodex_me. I'm a noob and I didn't make a back up first. Now I just want to get back to stock. If I flash the firmware in this thread, will that put me back to stock? Any help is much appreciated , please, and thank you.
Click to expand...
Click to collapse
Yeah, if you flash this firmware you will be completely stock. It week completely wipe your phone and you will have to reroot.
Awesome, thank you much for the reply.
Sent from my SAMSUNG-SGH-I537 using Tapatalk
Wait. . Do I flash with safestrap, or do I need to use odin
Sent from my SAMSUNG-SGH-I537 using Tapatalk
I figured it out. Flashed the files with odin. It's running great. thanks again for the help. You guys are geniuses.
Sent from my SAMSUNG-SGH-I537 using Tapatalk
Hello, friends, but when I flash the firmware, Odin says fail ? Please help MEEEEE !
So. I wanted 5o see if anyone else has had this issue or if anyone has another root method I could try. I recently had to get my wife's s5 replaced and after I installed towelroot, and clicked "make it ra1n" I got an error that says the device isn't supported.
tamelion1117 said:
So. I wanted 5o see if anyone else has had this issue or if anyone has another root method I could try. I recently had to get my wife's s5 replaced and after I installed towelroot, and clicked "make it ra1n" I got an error that says the device isn't supported.
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showpost.php?p=55133105&postcount=1
Thank you! I will try that when I get home from work.
Ok so just to clarify, I am running a SM-G900A. On baseband ending in ANG3. Towelroot does not support my device, so the above suggestion is the only way to root? And with our bootloader being locked, safetystrap is the only partial recovery we have to flash? I had just got the S5 and it came with the newer OTA update. Thank you in advance.
xSnowbum801x said:
Ok so just to clarify, I am running a SM-G900A. On baseband ending in ANG3. Towelroot does not support my device, so the above suggestion is the only way to root? And with our bootloader being locked, safetystrap is the only partial recovery we have to flash? I had just got the S5 and it came with the newer OTA update. Thank you in advance.
Click to expand...
Click to collapse
Yes, everything you said is correct. Flash the ND3 kernel and run towelroot. Install Safestrap as well, and then you can flash the NG3 kernel back to your phone.
Bought my S5 2 days ago with the latest Att ota update like yours. Odin the kernel back, applied towel root, Odin kernel forward to root as described above. Works perfectly. Can install safestrap after or before moving kernel forward.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
cstayton said:
try this http://forum.xda-developers.com/showpost.php?p=55133105&postcount=1
Click to expand...
Click to collapse
This worked flawlessly. Thanks.
tamelion1117 said:
This worked flawlessly. Thanks.
Click to expand...
Click to collapse
I feel like a noob here. i downloaded odin 3.10 but i cant open the RAR file to even begin this process.. help?
---------- Post added at 12:56 PM ---------- Previous post was at 12:09 PM ----------
xSnowbum801x said:
I feel like a noob here. i downloaded odin 3.10 but i cant open the RAR file to even begin this process.. help?
Click to expand...
Click to collapse
Update. successfully downloaded odin 3.09. but the problem now is when im trying to download the kernal files, they will not download. Even using the mirrors. ive tried every one and its been unsuccessfull.
xSnowbum801x said:
I feel like a noob here. i downloaded odin 3.10 but i cant open the RAR file to even begin this process.. help?
---------- Post added at 12:56 PM ---------- Previous post was at 12:09 PM ----------
Update. successfully downloaded odin 3.09. but the problem now is when im trying to download the kernal files, they will not download. Even using the mirrors. ive tried every one and its been unsuccessfull.
Click to expand...
Click to collapse
I just tried every one and they worked great for me. I would try a different browser. If you are using safari you need to turn off auto open/extract option.
Here is my presentiment that I've posted elsewhere
My phone was working just fine this morning but after updating a few apps through Google Play my phone started throwing up messages that gapps process was continuously crashing.
I then restarted the phone and it would not get to the AT&T startup. I have since flashed the OC1 kernel through SafeStrap but now the phone will not leave the AT&T startup logo.
Any ideas for what I can do? I have an older backup but not on 5.0 like I should. If need be I'll be going through the entire reinstallation process of 5.0 again.
EDIT: Just realized that I have a bigger problem now since I cannot access SafeStrap Recovery.
Click to expand...
Click to collapse
I need some help with ODIN to get it back to stock. As you can see, I cannot get to SafeStrap anymore. Would it be alright to ODIN to Lollipop or do i need to go to 4.4.4? Anything I need to keep in mind before doing this? I just need to get to SafeStrap and I can get to some backups that I have.
orangetag001 said:
Here is my presentiment that I've posted elsewhere
I need some help with ODIN to get it back to stock. As you can see, I cannot get to SafeStrap anymore. Would it be alright to ODIN to Lollipop or do i need to go to 4.4.4? Anything I need to keep in mind before doing this? I just need to get to SafeStrap and I can get to some backups that I have.
Click to expand...
Click to collapse
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:
Rooted i747 said:
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:
Click to expand...
Click to collapse
Thanks a ton for the reply! I appreciate it immensely.
I'll go through those steps tonight and report back.
Rooted i747 said:
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:
Click to expand...
Click to collapse
So I have the kernel you linked downloaded and unzipped. Within Odin 3.10 do I want to place that md5 file under the "Re-Partition" entry?
orangetag001 said:
So I have the kernel you linked downloaded and unzipped. Within Odin 3.10 do I want to place that md5 file under the "Re-Partition" entry?
Click to expand...
Click to collapse
Place it in the AP slot.
Rooted i747 said:
Place it in the AP slot.
Click to expand...
Click to collapse
Just to be safe. This look correct? I have my computer in Japanese locale so that's why the /'s turn out that way
orangetag001 said:
Just to be safe. This look correct? I have my computer in Japanese locale so that's why the /'s turn out that way
Click to expand...
Click to collapse
Looks good!:good:
Rooted i747 said:
Looks good!:good:
Click to expand...
Click to collapse
YOU ARE THE MAN, MAN! Booted into it right away after it was finished!
Rooted i747 said:
Looks good!:good:
Click to expand...
Click to collapse
I know you're probably sick of me posting but would I have to ODIN flash a different kernel to get Safestrap access on Lollipop? For some reason once I updated the startup prompt for Safestrap disappeared.
orangetag001 said:
I know you're probably sick of me posting but would I have to ODIN flash a different kernel to get Safestrap access on Lollipop? For some reason once I updated the startup prompt for Safestrap disappeared.
Click to expand...
Click to collapse
Yes you would have to flash the NC2 Kernel then after you are done with Safestrap you need to flash the OC1 Kernel. To access Safestrap without Odin you would need to install the NC2 Flasher from here http://forum.xda-developers.com/note-3-att/development/nc2-flasher-app-unsafe-t2989141/ plus you need the two (2) files from here http://forum.xda-developers.com/note-3-att/general/att-nj5-safestrap-t2957471 Thanks @benwaffle and Thanks @carl1961.
Without Odin https://youtu.be/yIjb0AiZOd4
---------- Post added at 03:20 PM ---------- Previous post was at 03:16 PM ----------
Without Odin https://youtu.be/yIjb0AiZOd4
I have Note 3 N900A the At&t version. It is currently on 4.4.2. Every time I tried software update. first time it says software update interrupted and then says your software is up to date check back in 24 hours. It keeps on repeating. However I want lollipop. I was thinking of flash upgrade to 5.0. Can any one please guide me in a very detailed procedure because its my first time to use an android phone. Previously I was an Iphone user. Please Help.
razanjafry said:
I have Note 3 N900A the At&t version. It is currently on 4.4.2. Every time I tried software update. first time it says software update interrupted and then says your software is up to date check back in 24 hours. It keeps on repeating. However I want lollipop. I was thinking of flash upgrade to 5.0. Can any one please guide me in a very detailed procedure because its my first time to use an android phone. Previously I was an Iphone user. Please Help.
Click to expand...
Click to collapse
Odin flash all four files from here http://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 How to use Odin here (it shows only one file but you need to flash all four files) http://www.samsungodindownload.com/odin-tutorial/ This is STOCK Lollipop. Thanks @Walter.White
Rooted i747 said:
Odin flash all four files from here http://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 How to use Odin here (it shows only one file but you need to flash all four files) http://www.samsungodindownload.com/odin-tutorial/ This is STOCK Lollipop. Thanks @Walter.White
Click to expand...
Click to collapse
Thanks. I will try. Is 3.09 version of Odin fine?
razanjafry said:
Thanks. I will try. Is 3.09 version of Odin fine?
Click to expand...
Click to collapse
Yes
Rooted i747 said:
Yes
Click to expand...
Click to collapse
When I add AP file it says md5 error! Binary is invalid. What to do?
Other CSC , BL, CP file attached without any problem.
razanjafry said:
When I add AP file it says md5 error! Binary is invalid. What to do?
Other CSC , BL, CP file attached without any problem.
Click to expand...
Click to collapse
Might be a bad download.
---------- Post added at 06:32 PM ---------- Previous post was at 06:20 PM ----------
md5 online checker http://onlinemd5.com/ or try a different Odin http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613
Rooted i747 said:
Might be a bad download.
---------- Post added at 06:32 PM ---------- Previous post was at 06:20 PM ----------
md5 online checker http://onlinemd5.com/ or try a different Odin http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613
Click to expand...
Click to collapse
Thank you very much. It solved my problem. I now have android lollipop 5.0 Thank You
Inside of zip you got 4 files :
AP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
BL_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CSC_ATT_G920AATT6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
Unzip and put in appropriate file windows in ODIN
BL file in BL window
AP file in AP window
CP file in CP window
CSC file in CSC window.
Wait for every file to load in ODIN, put your phone in Download mode connect to PC look for get connected to ODIN, then click start. All data will be lost so remember to backup all files you need it.
If you don't know how to use ODIN search YouTube.
Good luck
Download files
Odin here 3.12.7
G920AATT6DQC1 ODIN files - status " UP"
I will not post this files because seems like nobody want them.
norbarb said:
I will not post this files because seems like nobody want them.
Click to expand...
Click to collapse
I would like the files please. Please post them or PM me.
Publish the download link please
tracer200 said:
I would like the files please. Please post them or PM me.
Click to expand...
Click to collapse
cesarsuarez said:
Publish the download link please
Click to expand...
Click to collapse
Ok. Link is UP
norbarb said:
Ok. Link is UP
Click to expand...
Click to collapse
So does this firmware have the version 6 Bootloader? Like I currently have EQC9, if I change to this one will the phone work?
tracer200 said:
So does this firmware have the version 6 Bootloader? Like I currently have EQC9, if I change to this one will the phone work?
Click to expand...
Click to collapse
Yes. Bootloader version is number after U or S. So this one is G920AUCS6DQC1. This indicate that bootloadr is V6
norbarb said:
Yes. Bootloader version is number after U or S. So this one is G920AUCS6DQC1. This indicate that bootloadr is V6
Click to expand...
Click to collapse
Thank you, I flashed it and and I'm restoring apps now.
Anyone here has the odin file of nougat for g920a? Please do share. Im currently on dqb3..
Beasty2215 said:
Anyone here has the odin file of nougat for g920a? Please do share. Im currently on dqb3..
Click to expand...
Click to collapse
In order to have some Odin files it have to be officially realised
Clicking from Edge of Galaxy
Worked good. Thank you.
You can upload the Nougat firmware
will it work on an unlocked samsung s6 smg920a
After flash this, I have the dm verity verification failed, what can I do? TIA..
is it really Nougat firmware?
norbarb said:
Inside of zip you got 4 files :
AP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
BL_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CSC_ATT_G920AATT6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
Hi, I flashed this QC1 firmware a couple of times but still I see Android 6.0 under Software info after installing. What could be the issue? No Nougat!
Click to expand...
Click to collapse
raakaysh said:
norbarb said:
Inside of zip you got 4 files :
AP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
BL_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CSC_ATT_G920AATT6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
Hi, I flashed this QC1 firmware a couple of times but still I see Android 6.0 under Software info after installing. What could be the issue? No Nougat!
Click to expand...
Click to collapse
Because this is not Nougat.
Go here to continue to Nougat
https://forum.xda-developers.com/att-galaxy-s6/general/adb-official-updates-t3601009
Click to expand...
Click to collapse
Im runing this firmware, is it okay to directly upgrade to nougat? and what firmware?
norbarb said:
Inside of zip you got 4 files :
AP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
BL_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CSC_ATT_G920AATT6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
Unzip and put in appropriate file windows in ODIN
BL file in BL window
AP file in AP window
CP file in CP window
CSC file in CSC window.
Wait for every file to load in ODIN, put your phone in Download mode connect to PC look for get connected to ODIN, then click start. All data will be lost so remember to backup all files you need it.
If you don't know how to use ODIN search YouTube.
Good luck
Download files
Odin here 3.12.7
G920AATT6DQC1 ODIN files - status " UP"
Click to expand...
Click to collapse
---------- Post added at 05:31 PM ---------- Previous post was at 05:23 PM ----------
RoryB said:
raakaysh said:
It is okay to update this while samsung account is logon on my device and the reactivation lock is on.
I cannot logout my account. please advise.
Because this is not Nougat.
Go here to continue to Nougat
https://forum.xda-developers.com/att-galaxy-s6/general/adb-official-updates-t3601009
Click to expand...
Click to collapse
Click to expand...
Click to collapse
jrosea said:
Im runing this firmware, is it okay to directly upgrade to nougat? and what firmware?
---------- Post added at 05:31 PM ---------- Previous post was at 05:23 PM ----------
YES !
Click to expand...
Click to collapse
How to root G920AUCS6DQC1
will this root my phone? I need to root my 920A.
S6 AT&T 920a DPJ1 to Dqc1
sir iam on 6.0.1 baseband version G920AUCS5DPJ1 can i directly update to 7.0 BB DQC1