[Q] No mobile data after installing custom ROM - Mi 3 Q&A, Help & Troubleshooting

Hi All - I tried flashing 2 custom ROM's (Monnlight and Mokee), both install just fine but i am unable to get mobile data on either of the ROM's. Everything works fine on Wifi. I can even make calls fine. My IMEI number is correct, hence not sure why i cannot get the mobile datat to work.
Tried manually entering the APN details, still no luck.
Hoping somebody has a fix.

Have you tried this:
dial *#*#4636#*#*
select WCDMA-preferred or CDMA auto-prl

gary138.138 said:
Have you tried this:
dial *#*#4636#*#*
select WCDMA-preferred or CDMA auto-prl
Click to expand...
Click to collapse
Thanks Gary, I tried your code and selected various options nine work. I can still see the Exclamation mark and no mobile data. However on the diagnostic page it says "Connected" and network type "HSPA". I have tried multiple settings rebooting, still no luck.
The funny thing is if i switch back to my phone OS which MIUI v6 evrything works fine. I even checked the baseband number its teh same in the working ROM and the non working ROM.
I am really confused what's happening.

It seemed like a ROM issue I installed a non Cyanogenmod based ROM and it worked just fine

Related

[Q] Need help connecting to data!

Im new to flashing roms, so bare with me. I flashed my first rom last week, using Andromeda3 and Ursa Minor #2 kernel, everything worked great except, i couldnt connect to 3G/H, even though it showed up on notification bar, tried looking for answers, i ended up flashing different modems to no avail. So, i flashed back to stock eclair, used kies mini to upgrade to Froyo 2.2 UCKB1, Data worked. I then flashed UCKB2 rom, data didnt worked) i tried wiping cache and all that, still no data connection, btw, wfi worked. So i flashed back to UCKB1, again, everything worked perfectly. The other day, i flashed Fusion XI and GB bootloaders, i must say i like this rom very much, but again still couldnt connect to 3G/H, everything else worked, although i havent tested the GPS yet, i am getting amazing DL/UL speeds through wifi. Anyway, i searched XDA for any answers i could find and pretty much tried them all, seems like only KB1 3G will work, but any custom rom out there, data hasnt worked even though i see it in notification area, i'd use market and browser, but would say could not connect. Am i doing something wrong/ missing a step?? I really like Fusion XI and dont want to flash back to stock. Any help would be appreciated.
Didnt know where else to post this, seems like other people dont have the data connection issue :/
That's weird.
Try flashing the kb1 modem on fusion.
I did try flashing the KB1 modem, but that too, didnt work. it only works if i go back to stock KB1 for some reason.
where do you live? what Carrier are you with?
have you checked your APN settings?
fill in your location and carrier/ device info in your signature/ xda user information.
I Live in Southeastern Pennsylvania. And currently have AT&T as my carrier. I tried APN settings, but not sure what to set it too, i have used APN Manager from the Market.
Try resetting ur apn settings to default. Then reboot.
Sent by XDA Premium App
how do u reset apn settings?
Settings, wireless and networks, mobile networks, access point names. Now hit the menu key and reset default apn well be on the bottom left...
Ok, tried that, still a no go connecting to data. I just flashed stock 2.1 then 2.2 update through Kies mini, i no longer have data connection even on official stock roms could this be a hardware issue??? gps sucks. ran a gps test using the app from market. other than that, everything else is working. what did i do wrong?

[Q] Droid 3 CM10.1 No service Problems

I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
edhogan1224 said:
I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I had the exact same problem. I went insane scouring the web for hours trying to find a single person with the same problem until I finally gave up. Does anyone know the last version that actually worked?
I also have this problem, do anyone have any idea how to fix this problem?
edhogan1224 said:
I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I had similar problems on cm10.1. I have no idea if this will work (I'm outside the US, and my phone asked me to activate the phone), but I also had no service, no data. I changed my network mode from GLOBAL to GSM/WCDMA auto. Now I have service and data (Data after applying the correct carrier apn settings)
I hope this helps you all
P.S. after this step I made factory resets without the need to do the above step again (You only need to put the correct apn settings again if your on networks other than Verizon)

no internet connection via mobile network

Hello. When I turn internet connection via mobile network nothing happen. There is no icon letter icon next to my signal strength. Restar phone doesnt help. Any ideas?
mateusz3112 said:
Hello. When I turn internet connection via mobile network nothing happen. There is no icon letter icon next to my signal strength. Restar phone doesnt help. Any ideas?
Click to expand...
Click to collapse
I have a similar issue.. but only when I use a Stock Rom..
When I use a CyanogenMod based rom I connect normally.
Any suggestion if there's an option, in build.prop maybe, so I can fix this in a stock rom?
hi, you use a rom from XDA? is it happen after flashing a new rom, first boot, no mobile internet? -> how about some informations about runnign system etc. pp. was it working before with same rom? and so on....
if no internet after first boot: turn on wifi, go Settings/Xperia/Internet Settings , and try download the settings with wifi. how that?
second thought: your provider's fault?
Xperia V is not officially supported by my carrier, but I can use mobile data on cyanogenmod.
I tried to add APN for my carrier, but they don't appear, using APN Manager I could see and try to apply them, only to get an error.
I was willing to go back to stock rom 'cause I wanted to use sony's camera.. but mobile data is essential.. guess I'll to stick with cyanogenmod..
i have added my provider (three uk) network apn manually and it worked.. yesterday.. Now still I cant connect. No reaction at all. I've downloaded settings via wifi and didnt help. Im running official rom 9.1.A.1.141. It is not a provider fault - I used o2 before and it was the same problem. Sometimes restart helps. but not now,
edit. now restart helped.. i dont get it.. This is very enoying
Anyone have any ideia how to fix this issue?
In CM all APN are shown correctly, in any stock based rom I can't add any entries, or it's not shown.

[Q] CM No service

After flashing CM 10.1 onto my HTC One Sprint everything seemed to be fine.
I flashed the CM, then the GApps, then the boot.img, went through the setup, and all seemed well.
After turning my Wifi off for a moment I realized that I had no service what so ever.
I have rebooted and re-flashed everything a few times and the IMEI number shows up just fine starting with 99.
Anyone know how to get my phone back to working like a phone?
[SOLVED]
after trying many a more ways I got it to work by going to the phone dial-er and typing *#*#4636#*#* to get to the phone info settings.
I changing the setting from Unkown to GSM/CDMA auto and all is fine.

No network connection

I get network connection on every single rom I can find but when it's Cyanogenmod or based on Cyanogenmod I get no network connection at all.
Tried clean installs of cm but still no network connection, is this a new way by cm to get rid of it's users?
I assume you have made sure that your APN settings are correct ?
Check your baseband if it is "Unknown".
It's unknown and network has worked before once but stopped after I updated it and clean installs didn't make it work again.
I was in similar situation. (no baseband, IMEI, sim-locked)
I restored backup through CWM, but it did'nt help.
I flashed the CM11 after data and cache wipe... and it helped. Everything came back to normal.
I x4.

Categories

Resources