Anyone using Viper4Android on lollipop? - AT&T Samsung Galaxy S 5

It would appear that Samsung locked the SELinux to Enforcing but I was curious if anyone was able to get V4A working. I have been unsuccessful.

archie87 said:
It would appear that Samsung locked the SELinux to Enforcing but I was curious if anyone was able to get V4A working. I have been unsuccessful.
Click to expand...
Click to collapse
unsuccessful here too.

I am considering going back to KK because I miss the audio quality of V4A.

There is a version of v4a made for lollipop on the nexus 5 called lolliviper. Its a zip that needs to be flashed, so we should be able to flash this using fireflash.
I didnt make a backup before I flashed 5.0 so I'm hesitant try it. Maybe someone is brave enough to try for us and report back?
http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796

DTR204 said:
There is a version of v4a made for lollipop on the nexus 5 called lolliviper. Its a zip that needs to be flashed, so we should be able to flash this using fireflash.
I didnt make a backup before I flashed 5.0 so I'm hesitant try it. Maybe someone is brave enough to try for us and report back?
http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
Click to expand...
Click to collapse
Thanks for linking to this. I may give it a shot.

DTR204 said:
There is a version of v4a made for lollipop on the nexus 5 called lolliviper. Its a zip that needs to be flashed, so we should be able to flash this using fireflash.
I didnt make a backup before I flashed 5.0 so I'm hesitant try it. Maybe someone is brave enough to try for us and report back?
http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
Click to expand...
Click to collapse
I installed a variation of the zip that i got from the OPO forums, it added some libs and changed a couple files and also added the viperaudio apk to priv-app, like it says in the thread, but i believe it was on older version, regardless it said the driver installed, and the option changed to uninstall driver implying it was, but i didn't notice much difference(didn't have much time to test though, bricked shortly after, unrelated) you can give it a shot though, it should work fine just do the first zip attatched, maybe the second, it says in the thread though that you NEED a permissive kernel so it working is doubtful.

Rakuu said:
I installed a variation of the zip that i got from the OPO forums, it added some libs and changed a couple files and also added the viperaudio apk to priv-app, like it says in the thread, but i believe it was on older version, regardless it said the driver installed, and the option changed to uninstall driver implying it was, but i didn't notice much difference(didn't have much time to test though, bricked shortly after, unrelated) you can give it a shot though, it should work fine just do the first zip attatched, maybe the second, it says in the thread though that you NEED a permissive kernel so it working is doubtful.
Click to expand...
Click to collapse
You are correct. I read the thread and regardless of how V4A is installed, the end result is the same. We need SELinux to be permissive which appears to be currently impossible with our stock kernel.

archie87 said:
You are correct. I read the thread and regardless of how V4A is installed, the end result is the same. We need SELinux to be permissive which appears to be currently impossible with our stock kernel.
Click to expand...
Click to collapse
multisystem for android ( found here http://forum.xda-developers.com/att-galaxy-s5/help/qa-multisystem-android-t3101217 ) says it supports selinux permissive mode, so perhaps we can use this to flash a rom to a secondary slot, enable permissive mode with selinux mode changed apk, and then follow the lolliviper instuctions to get viper back.
Ton of work for little reward but I really miss having viper.
I will try this method if and when I ever get a day off

DTR204 said:
multisystem for android ( found here http://forum.xda-developers.com/att-galaxy-s5/help/qa-multisystem-android-t3101217 ) says it supports selinux permissive mode, so perhaps we can use this to flash a rom to a secondary slot, enable permissive mode with selinux mode changed apk, and then follow the lolliviper instuctions to get viper back.
Ton of work for little reward but I really miss having viper.
I will try this method if and when I ever get a day off
Click to expand...
Click to collapse
I tried it, didnt work, seems it needs more tha just selinux set to permissive.
Sent from my Twi5ted SM-G900A using Tapatalk

Requires a custom kernel set to permissive which we don't have.

archie87 said:
Requires a custom kernel set to permissive which we don't have.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Twi5ted SM-G900A using Tapatalk

Rakuu said:
Sent from my Twi5ted SM-G900A using Tapatalk
Click to expand...
Click to collapse
You have a custom rom with a permissive kernel and it still doesn't work? That's interesting.

archie87 said:
You have a custom rom with a permissive kernel and it still doesn't work? That's interesting.
Click to expand...
Click to collapse
Rom has nothing to do with it, im on stock kernel, multisystem sets you to permissive, did you read at all?
Sent from my Twi5ted SM-G900A using Tapatalk

Rakuu said:
Rom has nothing to do with it, im on stock kernel, multisystem sets you to permissive, did you read at all?
Sent from my Twi5ted SM-G900A using Tapatalk
Click to expand...
Click to collapse
The bottom line is that it's not gonna work. Doesn't matter which path we take the destination is the same.

archie87 said:
The bottom line is that it's not gonna work. Doesn't matter which path we take the destination is the same.
Click to expand...
Click to collapse
It COULD work, just have patience, i'm sure someone will get it working.
Sent from my Twi5ted SM-G900A using Tapatalk

I too have flashed the lolliviper using FireFlash
I have SELINUX permission changer still backed up. Installed it. Applied it. Moved the files to system. Installed the drivers...changed the build prop...froze the adapt sound and still no dice. To be honest I see zero reason to be on lollipop and will be downgrading this weekend back to Kit Kat. I miss viper, xposed, and battery life. Lollipop and material design is the biggest farce of an update ever foisted onto a user base since Windows Vista.

Related

(ROM) Stock W/ Root 1.54.651.8

Let The Games Begin!!! F_CK ME FOR TRYING.
This is the stock 1.54.651.8 Odexed Rom W/ Root. It also contains the following:
Busybox
/data/preload
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
HTC One (M8) Unlocked With htcdev.com (S-ON) or S-OFF
Custom Recovery (Personally Tested And Successfully Flashed Using TWRP 2.7.0.4, From Here.)
Latest Firmware (Requires S-Off, Info Here. Thanks @eric00716 and @beaups!)
A WORKING Backup!!! I'm no pro, and will not be responsible for any possible damages, although we should be fine. Quick tip: Don't Use The Compression Option In TWRP For Now.
Click to expand...
Click to collapse
Instructions:
Download Rom
Place On Either Memory Card (Internal or External)
Reboot Into Your Current Custom Recovery
Wipe "Cache" and "Dalvik-Cache"
Flash Rom
Click to expand...
Click to collapse
An Additional Version Is Available To Download Containing R/W Protection Disabled.
Downloads: Check MD5's To Be Sure It's All Good.
Stock W/ Root (REMOVED SINCE 90% OF USERS CANT GET IT TO WORK, FLASH CAPTAIN_THROWBACK'S STOCK ROM.)
Mirrors Are Reflections
MD5: 3706aadf11bbfd078e659d842cf0ef42​
Click to expand...
Click to collapse
Coming Soon:
Insecured+init.d supported Kernel (Get It Here, Baking Into Rom As Soon As Capt. Approves...)
De-Odexed Versions
Click to expand...
Click to collapse
Just Trying To Be Helpful, Don't Shoot Me If Your Phone Explodes or Sends Your Girl Nudes Of Your Ex.
Tested And Have Had Zero Issues Flashing, Booting or Running. (Wiped my phone a few times to assure it all worked...)
Wan't To Say Thanks In A Special Way? Check Out My First Link In My Sig A Enjoy My Beats, HTC Does.
Credits+Thanks
@Captain_Throwback for all his resources he has provided.
@Flar2 for R/W Protection Disabler Module.
@OMJ For Pointing Out My 2 Mini Syntax Errors That I Swore Weren't There lol.
@AFH For Quickly Giving Me Developer Access.
Click to expand...
Click to collapse
Appreciate this!
Sent from my 831C using xda app-developers app
ronniemayo said:
Appreciate this!
Sent from my 831C using xda app-developers app
Click to expand...
Click to collapse
Just want to help, im no pro, but love to see happy #HTC users.
wp_mod (system write protection disabling) should not be included, it is a crude hack that can result in data corruption. If you're s-off you don't need it.
m03sizlak said:
wp_mod (system write protection disabling) should not be included, it is a crude hack that can result in data corruption. If you're s-off you don't need it.
Click to expand...
Click to collapse
I didn't have that issue, but i'll make a new zip with it removed... Thanks!
so I'm s-off now. Will I be able to remove bloat & will it not come back after a reboot? I was just planning on flashing the no patch version.
Maybe dumb question but does this rom include init.d support? Specifically I want to flash the sweep to sleep mod. I had it working until I updated my phone to sprints latest.
Sim-X said:
so I'm s-off now. Will I be able to remove bloat & will it not come back after a reboot?
Click to expand...
Click to collapse
Should... If It Comes back, use the rom with R/W protection disabled.
henderjr said:
Maybe dumb question but does this rom include init.d support? Specifically I want to flash the sweep to sleep mod. I had it working until I updated my phone to sprints latest.
Click to expand...
Click to collapse
Not yet, im sure @Captain_Throwback has or will have it soon.
henderjr said:
Maybe dumb question but does this rom include init.d support? Specifically I want to flash the sweep to sleep mod. I had it working until I updated my phone to sprints latest.
Click to expand...
Click to collapse
I use an app called "extended power menu". Not sure where I got it, but it was in my Titanium backup so I still use it.
Big thanks to whoever that was. But you hit the app, and the reboot menu comes up, even screen off.
Was the kernel updated? shouldn't effect the modules working if it was right?
Guys, upload is corrupted. -_- Wait on it...
Rydah805 said:
Guys, upload is corrupted. -_- Wait on it...
Click to expand...
Click to collapse
just bout to mention that, koo koo, chillin at work. Smoke time
MassStash said:
just bout to mention that, koo koo, chillin at work. Smoke time
Click to expand...
Click to collapse
LOL My Kinda Smoke Time Has To Be After Work... :0
MassStash said:
Was the kernel updated? shouldn't effect the modules working if it was right?
Click to expand...
Click to collapse
If the radio was updated the kernel was almost defintely updated. The updater will install new modules for the new kernel. If you're talking about wp_mod, you don't need it anymore if you're s-off. If you're not s-off, then it'd need to be hexedited to load on the new kernel.
Rydah805 said:
LOL My Kinda Smoke Time Has To Be After Work... :0
Click to expand...
Click to collapse
ah man, I work at a lil watch place in a mall that's currently dead as fug, it's double smoke time here haha
m03sizlak said:
If the radio was updated the kernel was almost defintely updated. The updater will install new modules for the new kernel. If you're talking about wp_mod, you don't need it anymore if you're s-off. If you're not s-off, then it'd need to be hexedited to load on the new kernel.
Click to expand...
Click to collapse
just md5'ed the 1.12 and update 1.54 boot.img, and definately dif. But good call on s-off making it not necessary, I totally forgot about that
finally back home, uploading resumed.
download is up guys!
Mirror added...
Link for second version now up... modded kernel coming tomorrow, headed to a Dodgers game.

[Q&A] Custom XT1254 21.44.12 Image - Root, BusyBox and Xposed

Q&A for Custom XT1254 21.44.12 Image - Root, BusyBox and Xposed
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Custom XT1254 21.44.12 Image - Root, BusyBox and Xposed. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
How can I do not see the link for the download?
darknight18 said:
How can I do not see the link for the download?
Click to expand...
Click to collapse
Because, as stated in he original post, "I will be posting links today, and also when time permits I will be removing about 30 unneeded bloat apps."
He hasn't posted the links yet... And "today" could be anytime in the next 15 - 18 hours depending on the timezone.
Everyone loves to be negative about the idea of paying $20 for the semi root process but it's people like this that make it worth it. Regardless of the person it goes to it motives selfless people to come up with cool stuff I benefit from. I'm looking forward to flashing this img.. I miss gravitybox.. If you want I'll throw you some dollars cause you deserve it too..
Sent from my XT1254 using XDA Free mobile app
I cant set the ownership correctly the owner is set to root but when I try to change the group to shell root browser spits back failed sometimes this isnt allowed on some file systems
is this a problem? other than the group security thing being able to get root that seems like a security issue? should I be worried?
Keep up the good work!
Has anyone had any problems while changing permissions? I keep getting "Changing permissions was not successful. Please note that some file systems do not allow permission changes."
Thanks
I'm definitely a lurker and don't post when I have nothing of value to add but I wanted to say thank you for your work. I'm running your build now and so far it's great.
I would like to see moaab ad blocking host files built in and couldn't you also build I'm the xposed jar file? I got it working with some effort but it did fight me a bit. Ending up having to clear the cache once I got it working to get it 100%.
Still though you should consider putting up a donation page. I don't have much money at all at the moment but would consider donating what I could.
Thanks!
Would you ever be able to do a version with secure settings installed?
I'm looking for information on getting busybox working on my phone. I have flashed a rooted image, installed ES File explorer as directed and intalled the xposed installer app, changed permissions and nothing has completed as stated.
One set of instructions explains how to setup a flash to get it working, but where and how exactly do I flash it and another set says to flash their img too. Thanks folks
Anyone have a camera crash while using HDR?
Google cam and stock crash if HDR is enabled.
Sent from my XT1254 using Tapatalk
timmyk465 said:
Would you ever be able to do a version with secure settings installed?
Click to expand...
Click to collapse
Seems to be ok, I have the xposed module active too. Haven't setup anything with it but it has root access.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
timmyk465 said:
Would you ever be able to do a version with secure settings installed?
Click to expand...
Click to collapse
Butcher98 said:
Seems to be ok, I have the xposed module active too. Haven't setup anything with it but it has root access.
Click to expand...
Click to collapse
Sweet! Under the options tab, how many of the features are active? Is Pattern Lock under root actions checked?
timmyk465 said:
Sweet! Under the options tab, how many of the features are active? Is Pattern Lock under root actions checked?
Click to expand...
Click to collapse
It wasn't checked by default but I was able to check it.
Butcher98 said:
It wasn't checked by default but I was able to check it.
Click to expand...
Click to collapse
Oh snap! :highfive:
Flashed the img with mofo, works great so far!
janitorjohnson said:
I'm looking for information on getting busybox working on my phone. I have flashed a rooted image, installed ES File explorer as directed and intalled the xposed installer app, changed permissions and nothing has completed as stated.
One set of instructions explains how to setup a flash to get it working, but where and how exactly do I flash it and another set says to flash their img too. Thanks folks
Click to expand...
Click to collapse
Go to the link below it will give you a link to the video that shows how to obtain the flashing software, and how to flash the img.
https://mofo.disekt.org/
Instructions?
Do I need to pay for MofoRoot and gain root access successfully before I can flash this image? If not, how to I flash the image?
Thanks in advance.
cj2566 said:
Anyone have a camera crash while using HDR?
Google cam and stock crash if HDR is enabled.
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
I am also getting crashes in both of these apps.
I am using a different image (the first one to get xposed working), and I never used the device before rooting it so I can't say for sure what is going on. Annoying because cyanogenmod made the maxx camera about useless, so I was excited to have good hdr again on the turbo .
Any ideas as to why I only get half root? I can use SU in terminal emulator as well as achieve root in a few apps, but others like titanium backup, adaway, busybox just plain say the phone isn't rooted.

SM-T817T root

Hi. I was able to install the T810 TWRP on my T-Mobile T817T. It boot looped unless I installed the permissive kernel. Rooted now, but lost access to the LTE. I assume its the kernel, but was looking for some insight.
Thanks.
docmo said:
Hi. I was able to install the T810 TWRP on my T-Mobile T817T. It boot looped unless I installed the permissive kernel. Rooted now, but lost access to the LTE. I assume its the kernel, but was looking for some insight.
Thanks.
Click to expand...
Click to collapse
Which version of lollipop are you running?
The kernel you installed is for the wifi only version on 5.1.1.
You shouldn't need to install the kernel if you are on lollipop 5.0.2.
Samsung has not yet released the source code for the LTE models, however I am in the process of modifying the t810 kernel to support LTE which you are welcome to test.
I have built a 5.1.1 kernel for you to test. See if it fixes your LTE issue.
T815_LL_5.1.1_boot_test
T817T LTE
ashyx said:
I have built a 5.1.1 kernel for you to test. See if it fixes your LTE issue.
T815_LL_5.1.1_boot_test
Click to expand...
Click to collapse
No. Not yet. BTW I'm on 5.1.1
First boot got bars with x over it.
Second boot lost that.
Added Mobile Hotspot section in Settings, still no Mobile Networks in settings.
Much Thanks. Glad to test anything you put up.
I know this is still being worked on by you, just wondering if this will work for the AT&T version when it's Done? Mine came with 5.1.1 T817a.
I am also willing to test.....I would also be more then happy to donate once root is achived, twrp would be nice, but root is a must.
Let me know if there's anything I can do or whatnot.
Thanks for all your hard work.
docmo said:
No. Not yet. BTW I'm on 5.1.1
First boot got bars with x over it.
Second boot lost that.
Added Mobile Hotspot section in Settings, still no Mobile Networks in settings.
Much Thanks. Glad to test anything you put up.
Click to expand...
Click to collapse
We're you able to get things working with root yet?
I have root. Because there is no source yet (as far as I know) I used ashyx's permissive kernel for the 810. I have no LTE. I do have a wifi tablet rooted on 5.1.1 with xposed running. I expect someday to get a kernel for 815 or 817 that will work with LTE. I hope.
I don't want to lose my LTE, lol. I'll wait. I'm sure there will be an option eventually.
Moostafa29 said:
I don't want to lose my LTE, lol. I'll wait. I'm sure there will be an option eventually.
Click to expand...
Click to collapse
There will when Samsung get off their backsides and release the source code.
hello.
i tried to root my SM-T817P with odin and both 810 and 815 and now it wont load. anyone can help me
sik.andre said:
hello.
i tried to root my SM-T817P with odin and both 810 and 815 and now it wont load. anyone can help me
Click to expand...
Click to collapse
Why do people never read or make backups before attempting to modify their device?
How many times does have to be said that before undertaking ANY operation that you fully understand what you are doing AND you have a full backup or the stock firmware?
If you are on 5.1.1 you first need to flash a custom kernel.
More info is required, what os build are you running?
I don't know witch os build I'm running. I'm really new at these stuff. I only did it to my two phones and I always follow the instructions here. As soon as I get home I can take a screen shot and show you.
It's quite likely your tablet is running 5.1.1.
You have 2 choices here, flash the custom kernel or flash the stock firmware.
Yes it's 5.11. I just call Samsung and my service provider they both will charge me for replacing the tablet.
Witch one is faster and more reliable. I don't think there's a custom kernel available already
sik.andre said:
Yes it's 5.11. I just call Samsung and my service provider they both will charge me for replacing the tablet.
Witch one is faster and more reliable. I don't think there's a custom kernel available already
Click to expand...
Click to collapse
Why do you need to replace the tablet? :what:
If you don't mind losing LTE until Samsung releases the source code for the LTE model then you can flash the t810 kernel below:
http://forum.xda-developers.com/tab-s2/development/kernel-permissive-lollipop-5-1-1-kernel-t3205831
Or return it back to stock by flashing the firmware below with odin:
http://samsung-firmware.org/download/Galaxy Tab S2/1yk0/SPR/T817PVPU1AOH6/T817PSPT1AOH6/
Follow the instructions on the page to install.
ashyx said:
Why do you need to replace the tablet? :what:
If you don't mind losing LTE until Samsung releases the source code for the LTE model then you can flash the t810 kernel below:
http://forum.xda-developers.com/tab-s2/development/kernel-permissive-lollipop-5-1-1-kernel-t3205831
Or return it back to stock by flashing the firmware below with odin:
http://samsung-firmware.org/download/Galaxy Tab S2/1yk0/SPR/T817PVPU1AOH6/T817PSPT1AOH6/
Follow the instructions on the page to install.
Click to expand...
Click to collapse
I'm trying to install the t810 but ondin 3.10.7 just dont get it go thru. it got stuck for some reason. I dont mind losing the LTE and now Im downloading the stock firmware. I just use the stock as the other kernel right?
Im doing this:
Open odin in administrator
open tar file in AP
connect the device in download mode
Run Odin.
fail. do you need the prtsc?
I just returned back to sock. do you think if I try the 810 version will do any good now? or should I wait for the right version. Like I said I dont mind lose the LTE.
Thank you a lot for helping me out.
sik.andre said:
I just returned back to sock. do you think if I try the 810 version will do any good now? or should I wait for the right version. Like I said I dont mind lose the LTE.
Thank you a lot for helping me out.
Click to expand...
Click to collapse
What is the error in Odin when flashing the kernel?
ashyx said:
What is the error in Odin when flashing the kernel?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is what i got
sik.andre said:
this is what i got
Click to expand...
Click to collapse
Just download the stock firmware from sammobile and then retry all again

[WIP][2016.03.14] Android N Preview - v2.70 [CLOSED]

All code changes needed for N Preview have been rolled into the BETA releases starting v2.71 BETA. This thread is now closed. If a new N Preview release comes out, or N Final is released, this thread may be re-opened. For now, proceed to the BETA thread!
OLD CONTENT
This thread is dedicated to SuperSU on N Preview. With the first few releases I'm not merging it directly with the BETA branch, as there have been some invasive changes under the hood regarding SELinux handling, and there should be a little bit more testing done before going there. Still, I expect this to be done within the next week or two.
I've only had the chance to test on the 5X so far, so there is some risk involved. If you're not comfortable reflashing everything due to bootloops, crashes, etc, wait for others to play the guinea pig.
RC-SuperSU-v2.70-20160314191951.zip
As this hasn't been merged with the BETA branch yet, I'm not updating the main CF-Auto-Root distribution either. But as TWRP isn't working yet on all N Preview devices either, attached are test CFAR versions.
Note that you are also welcome to flash this SuperSU version on pre-N firmwares, and report back if everything still works as expected.
If you have tried other methods of rooting, you need to at least flash back your stock boot.img before flashing SuperSU.
Depending on how much you have played around, reflashing /system may also be a wise move.
If you came from SuperSU v2.69, you need to reflash via TWRP or CFAR. Installing just the APK and updating binaries will not fix all the issues!
--- reserved ---
--- more reserved ---
Im using now phh should i flash over it?
Sent from my Nexus 6 using Tapatalk
Thanks Chainfire , good job, downloading
When trying to flash CF-Auto for Shamu using windows-fastboot i get a double oem unlock pop up on my phone after i click the first yes unlock although im already oem unlocked it will then pop right back up. to which my bootloader will then freeze for a few min then come responseive again but nothing was flashed i would receive a error while looking at the .bat it has the oem unlock twice in the codeing is this on purpose ?
Nexus only?
That's quick, thanks for all your contribution to this.
hamada samir said:
Nexus only?
Click to expand...
Click to collapse
For sure Nexus only, N preview is not available on any other phones.
Techno Peter said:
For sure Nexus only, N preview is not available on any other phones.
Click to expand...
Click to collapse
Thanks my brother ❤
This version is working fine on my Nexus 6P with MM MHC19I.
Ohh yeah. Back in business
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6 using Tapatalk
N6, RC-SuperSU-v2.69-20160313161431.zip through TWRP 3.0.0.1 seems OK. Testing in progress.
How are ya'll flashing? I can't get any version of TWRP to run on my N9, it just keeps restarting recovery, and I don't know what else I would try.
Can i flash it over phh cause i already root?
Sent from my Nexus 6 using Tapatalk
N6P
Worked on N6P, NPC56P
Thank You
Chainfire said:
This thread is dedicated to SuperSU on N Preview. With the first few releases I'm not merging it directly with the BETA branch, as there have been some invasive changes under the hood regarding SELinux handling, and there should be a little bit more testing done before going there. Still, I expect this to be done within the next week or two.
I've only had the chance to test on the 5X so far, so there is some risk involved. If you're not comfortable reflashing everything due to bootloops, crashes, etc, wait for others to play the guinea pig.
RC-SuperSU-v2.69-20160313161431.zip
As this hasn't been merged with the BETA branch yet, I'm not updating the main CF-Auto-Root distribution either. But as TWRP isn't working yet on all N Preview devices either, attached are test CFAR versions.
Note that you are also welcome to flash this SuperSU version on pre-N firmwares, and report back if everything still works as expected.
If you have tried other methods of rooting, you need to at least flash back your stock boot.img before flashing SuperSU. Depending on how much you have played around, reflashing /system may also be a wise move.
Click to expand...
Click to collapse
Thank you @Chainfire! Does this root method reside in the System Partition, or is it Systemless. Also, do we need to type in adb commands in TWRP before installing to force Systemless installation?
Thank you again:laugh:
Hey Chainfire!
Just a few question again from one of your supporters
Is it possible to receive OTA's after rooting N with your method? Or is their another way (like for example via your app "Flashfire")?
And can you flash new preview builds over a rooted build?
Thank you in advance
Help The Peace said:
Hey Chainfire!
Just a few question again from one of your supporters
Is it possible to receive OTA's after rooting N with your method? Or is their another way (like for example via your app "Flashfire")?
And can you flash new preview builds over a rooted build?
Thank you in advance
Click to expand...
Click to collapse
Android N OTA`s - it`s full system images, so it doesn't matter your device rooted or not.
Kameechewa said:
How are ya'll flashing? I can't get any version of TWRP to run on my N9, it just keeps restarting recovery, and I don't know what else I would try.
Click to expand...
Click to collapse
unzip and run root-windows.bat, or mac or linux sh file, depends on you OS.
ohad129 said:
Can i flash it over phh cause i already root?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Read first post

Viper4Android Audio Mod Android 7.0 Nougat

Good News…
Viper4Android is updated and now it supports Android 7.0 Nougat.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://downloadmirror.co/2zYA/ViPER4Android_2.5.0.5_guitardedhero.zip
I tested and it works.
You will need root and BusyBox
Have not tested with other than stock kernel.
How to install
Turn off your phone and boot into recovery.
Once your phone boots into recovery, navigate to install section and select*“ViPER4Android_2.5.0.5_guitardedhero.zip”.
Flash it and restart the phone.
When the phone turns on go to Play Store and install a file manager with root access. The best one is ES File Explore and Total Commander.
Open the File Manager and go to*/vendor/etc.Find*a file named*“audio_effects.conf”.*Delete this file or save somewhere just in case you want to revert back.
Now open Viper4Android on your device, and install the driver if it’s required.
Wait for the driver to finish installation and reboot the phone.
That’s all! You have successfully installed Viper4Android on Android 7.0 Nougat.
Driver wont install. Says can't gain root access. Didn't get a pop up to give it root access. Any ideas? Well set kernel to permissive and got past that part. Now have error saying no BusyBox... It's installed..
RSVP
Nice and thanks
Sent from my Nexus 6 using XDA-Developers mobile app
How to enable on power amp please?
patterson?? said:
Driver wont install. Says can't gain root access. Didn't get a pop up to give it root access. Any ideas? Well set kernel to permissive and got past that part. Now have error saying no BusyBox... It's installed..
Click to expand...
Click to collapse
I have busybox on rails installed. Got the same 'no root access detected' warning, rebooted and found driver installed. Tested working with headphones.
Sent from my Nexus 6 using Tapatalk
Works great for me! Good looks!
Sent from my Nexus 6 using XDA-Developers mobile app
Nishamsayshi said:
I have busybox on rails installed. Got the same 'no root access detected' warning, rebooted and found driver installed. Tested working with headphones.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
What kind of root are you using? SuperSU or Magics?
Sent from my Nexus 6 using Tapatalk
wuilly said:
What kind of root are you using? SuperSU or Magics?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I'm on tupac4u rom prerooted with supersu.
Sent from my Nexus 6 using Tapatalk
Speaker work SYSTEM wide? YouTube Play Music Spotify ? And does it work with phone calls on speaker phone and w/o speaker
Thanks
Sent from my Nexus 6P using XDA-Developers mobile app
Just installed this and no issues so far. David H. Lite Stock 7.0 with systemless root and stock kernel.
Keep in mind that the driver will not install unless you move that file out of the /vendor/etc folder.
I'm on stock 7.0 without root/busybox. Is there not a way to install everything in recovery? I unrooted to play Pokemon Go. They started doing Safetynet checks to login... Stupidest thing ever.
This is probably the most powerful upgrade ever. I can't wait to do my Tablet install in my dash. Btw for people having issues saying it can't detect the root or SU, you have to switch your kernel to permissive. Use Kernel Auditor-Mod.
lowridincrew said:
This is probably the most powerful upgrade ever. I can't wait to do my Tablet install in my dash. Btw for people having issues saying it can't detect the root or SU, you have to switch your kernel to permissive. Use Kernel Auditor-Mod.
Click to expand...
Click to collapse
Good point. That worked for me!
Just wondering if anyone has used FlashFire to install this zip?
Thanks
lowridincrew said:
This is probably the most powerful upgrade ever. I can't wait to do my Tablet install in my dash. Btw for people having issues saying it can't detect the root or SU, you have to switch your kernel to permissive. Use Kernel Auditor-Mod.
Click to expand...
Click to collapse
I downloaded Kernel Auditor. How do you switch it to permissive?
Sent from my Nexus 9 using XDA-Developers mobile app
Billabonged said:
I downloaded Kernel Auditor. How do you switch it to permissive?
Sent from my Nexus 9 using XDA-Developers mobile app
Click to expand...
Click to collapse
Go down to Misc. If it's not there, use This
Everything working 100% with factory image NBD90Z, SuperSU 2.78, Franco Kernel
If you switch to permissive anyway arise numbers 3.5 with dolby is a good choice too
I keep getting the following error: Driver install failed: I/O error, please reboot and try again. I am rooted, BusyBox, permissive selinux and on Tupac nougat, elemental x kernel, removed the file from vendor/etc. Any ideas?
Sent from my Nexus 6 using XDA-Developers mobile app
I keep getting this and I have busy box installed
Sent from my Nexus 6 using XDA-Developers mobile app

Categories

Resources