Related
Hey there guys, I've been searching the forums for the past couple hours and I can't really find what I'm looking for, mostly just references to Android devices. I have a Lumia 520 that I am using on the Straight Talk service, and I cannot get the internet sharing capability to work. I have seen tutorials on youtube and in other places (besides these forums) and none of those methods have worked for me. Could anyone give me any insight into what I might be able to do to get this feature working? Thank you.
Obvious first question: what happens when you try to use it?
GoodDayToDie said:
Obvious first question: what happens when you try to use it?
Click to expand...
Click to collapse
It sits there for about a minute or two and says 'Connecting....."
and then eventually I get this screen.
Wow, I have never seen or heard of that error before (there are a few common ones; that's not among them in my experience). That sucks.
Best guess: is the 520 branded to a particular carrier? You might want to try flashing an unbranded ROM (or a Straight Talk one, if such a thing exists) to the phone, just in case it's some carrier-specific configuration BS.
Otherwise... there's hacks that can be done with registry editing, and it *might* be possible to apply them to your phone, but I wouldn't count on it.
GoodDayToDie said:
Wow, I have never seen or heard of that error before (there are a few common ones; that's not among them in my experience). That sucks.
Best guess: is the 520 branded to a particular carrier? You might want to try flashing an unbranded ROM (or a Straight Talk one, if such a thing exists) to the phone, just in case it's some carrier-specific configuration BS.
Otherwise... there's hacks that can be done with registry editing, and it *might* be possible to apply them to your phone, but I wouldn't count on it.
Click to expand...
Click to collapse
Yeah I didn't see the error mentioned on any of the threads I was looking at. To be honest I am not a developer and half the stuff people say on this website I really don't understand. I was looking at your interop unlock thread and I should have worn a bib to catch the drool. I had no idea what you guys were even talking about half the time. The only thing I could gather from that thread was that the interop unlock doesn't work on any Nokia Lumia anyway regardless of branding. I bought my Lumia 520 as an AT&T gophone, but was able to put a Straight Talk SIM in it with no issues. So I do know that it works on different carriers, but the code someone had me put into my phone showed a locked icon which I guess means that it's sim locked or something? Bah. I'm confused.
It's *probably* not SIM-locked (or at least not anymore), since you aren't using it with the original carrier, but that's not the problem anyhow; SIM-unlocks don't remove carrier customization of features like Internet sharing. If it was something like the phone telling you to contact your carrier to have tethering added to your account (when your carrier already allows it), that would probably be a carrier branding issue. Similarly, if the phone just lied and said you had no data connection to share (when you totally did), that's probably the phone trying to use a carrier-specific tethering feature instead of doing it generically. Yours *could* be another example of the same kind of thing - you might try flashing an unbranded ROM, I guess - but I really don't know.
There are other options. For proxy-aware apps (web browsers for sure, many other things as well), you can run an app that sets up a proxy server on your phone. Tether-X is one such example; I've successfully used it before.
Hello,
I feel like this has probably been covered before, I have tried to search a bit, but the options that I have been finding (here and other places) either don't work or confuse me.
I recently bought my phone from Best Buy. They did not have a verizon note 8 in stock, but did have an unlocked one in stock. I was told that there was no difference and that it would be better ie. no verizon bloatware.
I thought that this would be a great deal and bought the phone, best buy swapped everything over for me (did not transfer apps and such as I wanted to go through and pick what I wanted to keep). Phone has worked great until 2 days ago (I've had it for just over a week now). I bought it when I was on the road down in Wyoming. Everything functioned like it should.
I travel home to North Dakota and try to send some pictures through text message...MMS? It had been a few days since I had tried it but I get an error. It says "Service not activated on network" and then "server response error". After spending an hour in the verizon store trying to solve this on the phone with a level 2 tech at verizon, they concluded that they weren't able to figure it out because I was running different software than they were used to. They are currently investigating it and will get back to me. I feel that chances are that since I did not get a Verizon phone they will probably just tell me not our problem and good luck!
Anyways, I feel that this is probably an issue with the APN settings, however my phone has them greyed out, I cannot do anything with them. I have researched a few different options, including rooting (don't really want to do) and none of them seem to work. I was hoping that you guys could help me out! I apologize if this isn't the correct forum, I just saw that there seems to be a great wealth of information on here and figured I'd ask.
PS. Mobile data,hotspot,phone calls, regular text,etc all work. It strictly seems to be MMS.
Thanks!
There is an add button in the apn settings. If the greyed out are not correct, you can add your own and then use them.
Sent from my Galaxy Note8 using XDA Labs
Thanks for the response!
Unfortunately even that is greyed out as well. Clicking it doesn't do anything. Also their are three little dots next to the add button and that brings up a greyed out "restore to default" clicking that doesn't do anything either.
On the apn screen it says something along the lines of "current user profile does not have access". I'm starting to think this is something verizon built into the phone or sim card, any other issue I've found similar to mine all seems to be related to Verizon.
Any other suggestions?
Thanks!
Apn setting
Check this out.
https://forum.xda-developers.com/galaxy-note-8/how-to/guide-enable-hot
Try the steps here
Mod Edit
This is strictly related to apn settings, so you might be able to fix this issue
Thanks! I haven't had time to try these but I hopefully can this evening.
Thanks for the responses!
Hey, did you find a solution for editing the APN?
No I didn't...it's all locked by the Verizon sim card. I had to get Best Buy to swap me over to a Verizon phone.
Very unfortunate that they decide to do this.
Well I have a unlocked note 8 on metro and I can edit the apn. You can try to update phone see if th that works. Pr a factory reset.
download quick shortcut maker, search for lte, select com.test.LTEfunctionality, scroll down to LTE APN Setting, Edit APN @heepo18
Hi,
I have a Note8 Dual SIM bought in the UK Samsung Store. I've notice that the caller id and Spam Protection option randomly switches off.
Also even with the option on and although I get the Smart caller ID when a number calls, there is no way for me to report the number if I want. What am I missing?
My unlocked S8+ did not had this issue.
Thanks.
When I receive a call from a number that is not listed as reported in the database I have to click on the 3 dots in the upper right hand corner, in that menu I can then choose report and block number.
That option is missing on mine.
Do you have a dual SIM?
Also I recently noticed that my phone is reported as SM-N950F and not by the friendly Galaxy Note8. If I go to the Samsung Members app this is what I see.
What do you have on yours? Can you post a screen Please?
I have a single sim, N950F from the UK (XEF). I'm not familiar with that Samsung Members app. I'm on a custom rom & don't have it but I don't remember having it when I was stock either.
First screenshot shows what it looks like for a reported number. Second screenshot show what it looks like for one not listed as reported in Hiya's database (shows unbl9ck cause I already blocked it, would say block otherwise).
Missing those options on mine... honestly I have tried everything. No spam protection.
Do you have this option? If no, are you rooted?
Yes I do have that option. Not rooted and stock.
Oh interesting, I was thinking that you might not have had that option but that takes care of that. I'm not sure why yours is different. Only thing I can think of is that it might have something to do with carrier or country?
Not carrier or country as I am in the UK with Vodafone UK and my previous S8+ had no issues. I am starting to believe that there is something wrong with it is phone!
Does anyone know what happened to the Smart Caller ID with the S10? I've went through the settings and seemingly enabled everything relating to it, but am possibly missing something? I had it previously on my note 8 and certainly miss having it. Any help is greatly appreciated.
Here's a link to what I am talking about: https://www.samsung.com/global/galaxy/apps/smart-call/
I do not have the toggle below blocked calls as noted in this webpage, but I do have 'Smart Call' as an app and permissions enabled. Not sure if it's a Verizon block or something?
I have it with my unlocked s10 on tmobile.
Yeah, sadly I do not have that in call settings. I'm thinking it has to do with Verizon blocking it for some unknown reason, likely to push their premium plans. Really miss having that feature and would be willing to flash if need be to bring it back.
Upon looking further, it appears my thinking was correct, Verizon disables this feature. Interestingly enough, my phone was purchased from Samsung.com in full, no contract pricing, so it comes with the U1 firmware installed. Apparently something must've taken place when I setup the phone and Verizon installed it's own profile. Anyone know of a way to disable this or best method to avoid this so my phone appears as an unlocked phone? Would hate to have to flash via Odin seeing as I am running the U1 firmware already, just have Verizon somehow messing with the unlocked nature of the device.
On 3 in Denmark, I enable it and come back later and it has been disabled again.
iOSNick said:
Upon looking further, it appears my thinking was correct, Verizon disables this feature. Interestingly enough, my phone was purchased from Samsung.com in full, no contract pricing, so it comes with the U1 firmware installed. Apparently something must've taken place when I setup the phone and Verizon installed it's own profile. Anyone know of a way to disable this or best method to avoid this so my phone appears as an unlocked phone? Would hate to have to flash via Odin seeing as I am running the U1 firmware already, just have Verizon somehow messing with the unlocked nature of the device.
Click to expand...
Click to collapse
Does your phone boot up with the Verizon logo?
Delete.
thecarp1975 said:
Does your phone boot up with the Verizon logo?
Click to expand...
Click to collapse
Yes it does.
I work in a cell carrier in Canada, when you first put a sim in an unlocked samsung it downloads and reboots with their customizations.
your Verizon phone is NOT preloaded with U1 firmware!
your Verizon phone comes unlocked.
I recently bought an unlocked Galaxy S10 SM-G973U on Amazon. Got new SIM card from a Verizon MVNO and activated phone. The phone downloaded Android 12, One UI version 4.0. Firmware Build number SP1A210812.016.G973USQS6HVA1. Service provide Software version SAOMC_SM-G973U_OYN_SPR_12_0007 SPR/XAA/VZW. The problem is there is no menu option to activate/switch on VoLTE which means when I'm on a call there is no internet. I've talked to the MVNO tech support multiple times and was told they couldn't see any problems on their side, or that the SM-G973U does not support VoLTE which is not true. I found on one of AT&T's sites that the SM-G973U needs a software patch to enable VoLTE. I also found a couple of USSD codes but they either didn't work or didn't get me to the right setup screen to turn on VoLTE. I even stopped by a Samsung store and they weren't any help either. They said they could re-flash a stock firmware but it would revert to being locked to a carrier which is apparently also not true based on what I've read on this forum. Anyone know how I can turn on VoLTE or know of an apk file or software patch to enable VoLTE?? Does one of the firmware versions posted online have the patch to turn on VoLTE??
I think the issue is that your phone is showing SPR/XAA/VZW. You say you're on a verizon MVNO (who, by the way?)... but your phone isn't seeing that. It's actually saying it's active for SPRint. The second one, XAA, means it's not able to detect the SIM type... and the third was that it was originally VZW, which you can't change and isn't really relevant. (That's just what the phone was "born" as).
Bottom line, your phone isn't seeing VZW or an MVNO as the active CSC nor the SIM card. In the past, the easy thing was to change the CSC to what you need, but I haven't found a way to do that actively. What's supposed to happen is that the CSC should update based on the SIM card and cell signal you're getting... but this doesn't always happen. I bought two phones - one switched with no issues, the other I could not get it to change no matter what I tried.
That said, the easiest thing is to clean flash the phone with ODIN to a VZW or your MVNO's ROM, so that (hopefully) the CSC updates automatically. You could also consider flashing a U1 (unlocked) ROM, as yours is not technically an unlocked ROM (U means it's a carrier ROM... which may be why it's not switching over?)
Again, I tried all of these on the second phone I bought, and nothing would switch it (my carrier is Total Wireless, which is a VZ MVNO, and actually shows up as Tracfone (TFN). I had to return that second phone and get another with TFN already activated, and that worked fine... so be sure you do this before you drop out of your return period.
Bottom line, you should be able to get this all working... my VOLTE/VOWIFI works fine... just a matter of getting you there.
Thanks. My carrier is Straight Talk which is now VZ. The SIM card they sent me has the wording "Verizon Compatible" written on it. I finally found a document that explains how to interpret the CSC codes and your explanation clarifies my understanding of it. Sound like I'll have to re-flash it. Since it was originally a VZW phone I'm thinking I should flash it back to VZW to see if that works before trying U1.
Dumb question as this is my first time flashing a phone. (I've flashed quite a few other things but never had to worry about CSC codes and bootloader versions, etc.) I don't see VZW firmware on samfirms or sammobile. I see Sprint, T-Mobile, and one listed as USA without carrier info but I don't see one for VZW. Can someone point me to the correct location to download SM-g973U and U1 firmware for VZW? Greatly appreciated and thanks for putting up with my lack of knowledge!
Edited: Found the files on sammobile. Will try the U1 (VZW) first. I'll keep my fingers crossed.
schwinn8 said:
I think the issue is that your phone is showing SPR/XAA/VZW. You say you're on a verizon MVNO (who, by the way?)... but your phone isn't seeing that. It's actually saying it's active for SPRint. The second one, XAA, means it's not able to detect the SIM type... and the third was that it was originally VZW, which you can't change and isn't really relevant. (That's just what the phone was "born" as).
Bottom line, your phone isn't seeing VZW or an MVNO as the active CSC nor the SIM card. In the past, the easy thing was to change the CSC to what you need, but I haven't found a way to do that actively. What's supposed to happen is that the CSC should update based on the SIM card and cell signal you're getting... but this doesn't always happen. I bought two phones - one switched with no issues, the other I could not get it to change no matter what I tried.
That said, the easiest thing is to clean flash the phone with ODIN to a VZW or your MVNO's ROM, so that (hopefully) the CSC updates automatically. You could also consider flashing a U1 (unlocked) ROM, as yours is not technically an unlocked ROM (U means it's a carrier ROM... which may be why it's not switching over?)
Again, I tried all of these on the second phone I bought, and nothing would switch it (my carrier is Total Wireless, which is a VZ MVNO, and actually shows up as Tracfone (TFN). I had to return that second phone and get another with TFN already activated, and that worked fine... so be sure you do this before you drop out of your return period.
Bottom line, you should be able to get this all working... my VOLTE/VOWIFI works fine... just a matter of getting you there.
Click to expand...
Click to collapse
Success! Was able to flash U1. VoLTE is now working. The CSC now shows TFN/TFN/VZW. Much appreciated!!!
Awesome, glad to hear that fixed it easily!
And TFN... I'm a fan there, too!
Hi! I'm having a similar issue with the same model and happy to see someone was able to enable VoLTE. However, most of what you said above is a foreign language to me. Would one of you be willing to give me a crash course in what you did?
Here's my specific situation. Last week (~1/4/23) Tracfone shutdown 3G. My Samsung Galaxy S10 (SM-G973U) says my network is set to LTE/3G/2G. I've read LTE is 4G, but still can't make or receive calls/texts, but data and 911 calls still work. Their tech support is no help.
From reading online it sounds like I may need VoLTE, not just LTE. Hence finding this thread. If one of you would be willing to spare some time to walk me through what you did I'd really appreciate it. In the mean time I'll try to figure out what "flashing" mean in a context that doesn't involve showing body parts
Thank you in advance!!
I'm on Tracfone (they were bought out by Verizon, BTW) - I was on Total Wireless before, which is now Total by Verizon. You might try contacting support again, as they are now VZ, and may have more help to offer.
My S10+ is running 975U1 now, and it works for VOLTE/VOWIFI properly. You may consider getting a U1 ROM installed, and maybe even the VZW (or TFN) version if available - that may get you working.
Did VOLTE ever work for you before on this or any other carrier? What is your CSC right now?
schwinn8 said:
I'm on Tracfone (they were bought out by Verizon, BTW) - I was on Total Wireless before, which is now Total by Verizon. You might try contacting support again, as they are now VZ, and may have more help to offer.
My S10+ is running 975U1 now, and it works for VOLTE/VOWIFI properly. You may consider getting a U1 ROM installed, and maybe even the VZW (or TFN) version if available - that may get you working.
Did VOLTE ever work for you before on this or any other carrier? What is your CSC right now?
Click to expand...
Click to collapse
Thanks for replying! I'm not entirely sure if VoLTE has worked previously. I bought this phone 6/2021 and have only haver had tracfone service for it. I did find in my setting that VoLTE calling is set to on so it seems like it should work. Of note, the 4Glte in my status bar has always been grayed out (I went back and looked at some old screenshots).
My current CSC is VZW/XAA/ATT.
I spoke with tracfone customer service yesterday and they had me reset my network setting and now I don't even have data and the 4Glte in my status bar that was previously gray has now completely disappeared.
Their customer service refuses to talk to me now (literally no one answers when it transfers to an agent) or they hang up on me, and no I haven't been rude, but I have told them I'm recording the call.
I bought a mint mobile package last night because I'm beyond frustrated with Tracfone. I'm worried I'll have the same problems with Mint. I'm not sure if my settings are screwed up or if it's just Tracfone. In any case things are worse now after talking to customer service yesterday.
I also notice there was no APN setting on my phone so I updated it today and restarted but no difference.
Thanks for any input!! Much appreciated. Sorry for the novel.
Ok, so based on your CSC, the phone is not seeing the SIM's carrier - it's showing XAA which means it's using the default settings, which is probably why your not getting VOLTE. The active CSC of "VZW" may be ok... depends on which carrier you're on with Tracfone. I think they're VZW only, but I'm not completely sure.
You may want to just get a new SIM card and get that activated. HOWEVER, the problem you'll likely face is that the phone was born ATT (last CSC). This means the IMEI won't match a "compatible" phone to Verizon, and they will flat out refuse to activate it (even though WE al know it will work fine). If you still want to do that, you will have to activate the new SIM on a VZ "compatible" phone, then you can swap it to the S10. Note that VZ complains about this when you talk to them... so don't tell them you're doing this... but I've done it many times and it works fine.
If your actual behind-the-scenes carrier is ATT, then you can do the activation with your phone without issue.
If none of this works for you, you can switch carriers to an ATT MVNO and you should be good to go.
schwinn8 said:
Ok, so based on your CSC, the phone is not seeing the SIM's carrier - it's showing XAA which means it's using the default settings, which is probably why your not getting VOLTE. The active CSC of "VZW" may be ok... depends on which carrier you're on with Tracfone. I think they're VZW only, but I'm not completely sure.
You may want to just get a new SIM card and get that activated. HOWEVER, the problem you'll likely face is that the phone was born ATT (last CSC). This means the IMEI won't match a "compatible" phone to Verizon, and they will flat out refuse to activate it (even though WE al know it will work fine). If you still want to do that, you will have to activate the new SIM on a VZ "compatible" phone, then you can swap it to the S10. Note that VZ complains about this when you talk to them... so don't tell them you're doing this... but I've done it many times and it works fine.
If your actual behind-the-scenes carrier is ATT, then you can do the activation with your phone without issue.
If none of this works for you, you can switch carriers to an ATT MVNO and you should be good to go.
Click to expand...
Click to collapse
OK some of that was still over my head. I'll see what happens with the Mint Sim... one f/u question now though. You said the ATT means my phone was "born" ATT. I bought my phone off backmarket and it was sold as "unlocked". Was that not true? How can I be sure in the future if I buy a used phone that's not from my carrier that it will actually be compatible?
Unlocked just means it's not locked to a carrier. That is true in your case, otherwise you wouldn't have been able to install ANY non-ATT SIM. So, you did the right thing to get an unlocked phone, and that is what you got.
The issue with compatibility is just the asshole carriers spreading lies. They do this to try to get people to buy THEIR phones, for no reason other than to make money and confuse consumers. The "born" CSC has no bearing on anything, really... neither does the carrier-specified IMEI. In your case, the XAA is good, which means it's a multi-carrier ROM, which works with all USA carriers.
Mint is a good idea - being an ATT carrier (IIRC), that should work and they should help you get it up and running even if they have to activate it. Good luck!
Awesome! Fingers crossed!! Thank you for your time and all the info❣
I'll try to remember to give an update in a few weeks for future readers
Goldie8709 said:
Awesome! Fingers crossed!! Thank you for your time and all the info❣
I'll try to remember to give an update in a few weeks for future readers
Click to expand...
Click to collapse
UPDATE: Switching to Mint worked like a charm! Once my number ported and I put the new SIM card in, service was instantaneous! I've had Mint for 3 weeks now and the service is so much better than with Tracfone! My calls go through nearly as soon as I hit call, the internet is faster.
I didn't need to do a thing either. No making APN settings, etc. I'm betting it has to do with what you said about my phone being born ATT. So funny because the software(?) is Verizon - shows the Verizon when I restart/power up. I still love my bastard phone
So thankful I didn't buy a different phone!!! Again thanks for all your help @schwinn8
Thanks for reporting back and letting us all know, and I'm glad it worked out well!
Yeah, the carriers pull this nonsense all the time... it's BS. The phones are all the same, only the ROM changes. If we can change ROMs (which we can) then there should be no reason to force users to specific IMEIs. But we know why they do this - follow the money. I encourage people to write to the FTC and FCC about this (I have).