Software update just fixed my Rotation problem - Verizon Samsung Galaxy S6 Edge

Just updated my S6 Edge, I had the dreaded screen rotation issue Updated is dated 22nd April 10:31:44
my build number is LRX22G.G250ZTU1AOD9 , my phone is from Taiwan, I bought it on a b-Trip , i Updated it in the UK OTA
Funnily enough in the hardware sensor check (*#0•# on the keypad) the Y axis is still stuck at 32967 (or something like that) , but the stupid dog now rotates, and all my apps work and rotate.
Have they overcome the broken hardware by using a different sensor ?
is the phone still broken but overcome in some alternative sensing method ? Will this be compatible with all apps ?
anyway, I'm happy for now ?

If it is a non-Verizon model, why did you post this on the Verizon section?

Because in my excitement, i was an idiot , Sorry !

No worries! Glad to hear it is working better though!

Related

Problem after change touch screen

Hello,
I bought on eBay (good seller) Touch screen to change one of my tablet.
I changed it without problem.
But now, after one day of use, I found bugs on touch it.
I have black areas (over detection) that moves randomly on the screen and restart it after re-working some time and hop it starts again in another area !!
(view a screenshot)
Do you think this is a quality of the new touch glass?
Or a software bug?
shaman_Turtle said:
Hello,
I bought on eBay (good seller) Touch screen to change one of my tablet.
I changed it without problem.
But now, after one day of use, I found bugs on touch it.
I have black areas (over detection) that moves randomly on the screen and restart it after re-working some time and hop it starts again in another area !!
(view a screenshot)
Do you think this is a quality of the new touch glass?
Or a software bug?
Click to expand...
Click to collapse
I'd guess that you haven't quite fitted it back together perfectly or the firmware got changed for the touchscreen by Asus for later revisions (or earlier) and you need to do a firmware touchscreen update.
Are you using a custom rom?
Hello,
I have a Stock Rom with last Update.
shaman_Turtle said:
Hello,
I have a Stock Rom with last Update.
Click to expand...
Click to collapse
So that should have applied the latest firmware. Hmmm
Go to settings, about, Hardware Information, Touch Panel version.
Mine is Raydium-0004-0000
What is yours?
Good question !!
I have make a 2 screenshot :
06 mai 2015 at 22:33
GPS V7.4.15 WIFI V7.1.50 Bluetooth V 11.0.27 Ecran tactile Raydium-0003-0008 Controleur PAD-AC32T-0309
and 07 mai 2015 at 09:08
GPS V8.1.16 WIFI V 8.0.46 Bluetooth V 12.0.44 Ecran tactile Raydium-0004-0000 Controleur PAD-AC32T-0311
Hello
My old touchscreen is ref : 5449N FPC-1
and my seller send a Compatible touchscreen but your ref is 5235N-FPC1.
I do not know what to do anymore?
Someone else he changed his touchscreen ???

Xperia X Performance (F8132) Accelerometer failure & Screen Auto-rotate irresponsive

Xperia X Performance (F8132) Accelerometer failure & Screen Auto-rotate irresponsive
Hi All,
I got an issue bothering me since I bought Xperia X Perfomance (F8132) Mid June.
The auto rotate function failed after a while but everything goes fine after reboot.
When it fails, I use "Xperia Service Menu" -> "Service Tests" -> "Accelerometer",
then all X,Y,Z are zero and the ball just sticks and freezes at mid.
I bought from Taiwan and I can find 15 more people having the same symptom with me on 2 forums
( http://mobile01.com and http://gamer.com.tw ).
Hence I don't think it's only me and it's a common issue or common yield problem for Xperia X Perfomance.
I post here because I'd like to find more people with the same issue and raise the attention of SONY in order to find the root cause (i guess it's either over-heat causes this or accelerometer yield issue) and give a patch.
Now I'm using a APP "Rotation Control" to workaround this, but all photos cannot records correct orientation data and no auto-rotate is kinda inconvenient.
For a flag-ship and high-priced cellphone for SONY this year, it is very disappointing to me. :crying:
Version: 35.0.A.1.227 and 35.0.A.1.238 both occur
huangjs said:
Hi All,
I got an issue bothering me since I bought Xperia X Perfomance (F8132) Mid June.
The auto rotate function failed after a while but everything goes fine after reboot.
When it fails, I use "Xperia Service Menu" -> "Service Tests" -> "Accelerometer",
then all X,Y,Z are zero and the ball just sticks and freezes at mid.
I bought from Taiwan and I can find 15 more people having the same symptom with me on 2 forums
( http://mobile01.com and http://gamer.com.tw ).
Hence I don't think it's only me and it's a common issue or common yield problem for Xperia X Perfomance.
I post here because I'd like to find more people with the same issue and raise the attention of SONY in order to find the root cause (i guess it's either over-heat causes this or accelerometer yield issue) and give a patch.
Now I'm using a APP "Rotation Control" to workaround this, but all photos cannot records correct orientation data and no auto-rotate is kinda inconvenient.
For a flag-ship and high-priced cellphone for SONY this year, it is very disappointing to me. :crying:
Version: 35.0.A.1.227 and 35.0.A.1.238 both occur
Click to expand...
Click to collapse
I also have that problem. No more auto-rotation after a while (1-2 days) . Only a reboot fixes that
DiLeon said:
I also have that problem. No more auto-rotation after a while (1-2 days) . Only a reboot fixes that
Click to expand...
Click to collapse
Thank you for letting us know.
It shows it's not a regional FW issue but a global HW or FW one.
I wonder if SONY knowing this. If not, we need to address this and push SONY to work it around.
And if it is not workaroundable, SONY will have a big problem.
I have the same issue on my Xperia X (F5121) bought in Sweden. Haven't checked the accelerometer but the behaviour is the same and reboot is only fix.
I have not had any problems with auto rotation, my accelerometer works fine but my touch screen is messed up
Sent from my F8131 using XDA-Developers mobile app
HellRoot said:
I have not had any problems with auto rotation, my accelerometer works fine but my touch screen is messed up
Click to expand...
Click to collapse
Same
HellRoot said:
I have not had any problems with auto rotation, my accelerometer works fine but my touch screen is messed up
Click to expand...
Click to collapse
Can you specify "messed up"? I've had issues with the touch screen also, mostly that it registers a tap while I'm scrolling resulting in involuntary tapping on links. Also it often takes a while to start scrolling, as if the screen has a hard time recognising the swipe.
I have the same problem. The accelerometer stop working 15 minutes after reboot.
Help me verify if is caused by a third party app or not.
Use your phone in safe mode for a while.
I'm from Hong Kong, the accelerometer and its auto-rotation of my x performance has the same problem that it won't work until i reboot my phone.
I dont think that is caused by a app crashing when the problems occuring in all around the world.
The issue didnt come to me when I was not yet update to 35.0.A.1.282. Please notice this problem SONY. It seriously affected the satisfaction from user of the phone from your brand.
There is a topic on the Sony support forum - see here: http://talk.sonymobile.com/t5/Xperia-X-Performance/Accelerometer-stops-working/m-p/1158490#U1158490
At least they are aware of the problem. As soon as it happens again on my phone, I will send them my logs. I will report any development...
It seems that I uninstall the AR effects in my phone and reboot, it works again
Rotation fails
Hello guys,
I have the same problem. Yesterday it worked fine, but today, the auto rotate don't work. Very disappointing. Only a reboot can help but not every time.
Sony has to do something with it.
Gyroscope/Auto-Rotation Issue
Hey everyone,
I'm also having this same issue, but only since the most recent update from late September. When trying to make a pic display as fullscreen by rotating the phone, nothing happens, unless I reboot the phone. Then within day or two, it starts happening again. When I go to camera it loads up and STAYS in landscape mode, no matter what I do, even closing it out and clearing out the cache & force stopping it then reactivating it. It seems like a software issue that Sony needs to address PRONTO!
It appears another thread here on XDA is dealing with the same issue. I tried shenlong85's idea and it seems to have fixed the issue, but I need another day or so to make sure. If you don't hear from me by Sunday (10/23), assume it's been fixed. Hopefully the Nougat update we're all about to get any day now will permanently fix it!
The memory uninstall updates only prolong the issues. Seems like the firmware issue earlier on.
Nougat... When are u coming?
shenlong85 said:
The memory uninstall updates only prolong the issues. Seems like the firmware issue earlier on.
Nougat... When are u coming?
Click to expand...
Click to collapse
Well, we'll see. I am giving my XP 'til Sunday........if no more auto-rotate issues by then, then I will consider your idea to be gold. lol Of course, once we get Nougat, I'm hoping it will ensure that the issue never comes back period. As of this time, the issue has NOT returned.
I bought my Xperia X Performance from Kogan who sells imports in Australia from Asia and I have the exact same issues with my orientation and touchscreen. However my jumpy touchscreen only seems to occur while charging.
RockStar2005 said:
Hey everyone,
I'm also having this same issue, but only since the most recent update from late September. When trying to make a pic display as fullscreen by rotating the phone, nothing happens, unless I reboot the phone. Then within day or two, it starts happening again. When I go to camera it loads up and STAYS in landscape mode, no matter what I do, even closing it out and clearing out the cache & force stopping it then reactivating it. It seems like a software issue that Sony needs to address PRONTO!
It appears another thread here on XDA is dealing with the same issue. I tried shenlong85's idea and it seems to have fixed the issue, but I need another day or so to make sure. If you don't hear from me by Sunday (10/23), assume it's been fixed. Hopefully the Nougat update we're all about to get any day now will permanently fix it!
Click to expand...
Click to collapse
I tried shenlong85's idea, but less than 24 hours after trying it, I switched my phone from Portrait to Landscape to view a 16:9 widescreen pic I had in my Album, and it WOULD not auto-rotate the pic. So unfortunately this "trick" doesn't work either.
Just have to hope Sony includes a fix with the Nougat update we're about to get any day now from them.
I'm noticing now too that once the Auto-Rotate function stops working, so does Smart Call Handling. Have to swipe screen once again to take calls. Hurry up Nougat!! lol
I'm having the same issue and the only help I'm getting from Sony support is to factory reset my device :\ I'm hoping Nougat makes it's way to our devices soon. I really like this phone and this is a pretty big issue to have.
SpencerElliott said:
I'm having the same issue and the only help I'm getting from Sony support is to factory reset my device :\ I'm hoping Nougat makes it's way to our devices soon. I really like this phone and this is a pretty big issue to have.
Click to expand...
Click to collapse
I agree Spencer. And yes Sony Mobile told me the same thing. I'll do a repair (which yes, includes a factory reset) only IF Nougat doesn't fix it. They say we're getting it "in or close to October", so I'm guessing it's gotta be coming any day now. Hopefully they include a fix with Nougat though and I don't have to do that. Getting tired of this BS with Sony. My Z3 had an issue where if I turned on Stamina Mode, it would 1) mess with my MMS (group/pic/video) text messages.........you don't know how many times I had to ask ppl to resend those to me and how much that sucked lol 2) Cause a "random" battery drain. Only fix was a factory reset. I FINALLY got wise and realized it was SM and kept it off. Found a great app called 360 Hibernation Master that did what SM was supposed to do but better, MINUS the buggy BS. But OF COURSE it doesn't work on any X series phone (at least not my XP), so I'm stuck with SM now. At least Sony Mobile FINALLY fixed that bug with SM so that's not an issue anymore. lol
It is a big issue, and it makes me not want to keep buying their phones.

Auto brightness not working correctly after 6.0.1 update

Several users (including myself) have pointed out that the automatic brightness doesn't work as before the 6.0.1 update.
Here are some of the reports:
kom-pakt said:
One of the few drawbacks I noticed just today is that the auto brightness seems a lot less responsive. For example it's very sunny today and most of the time when pulling the phone out of my pocket the display was still stuck on low brightness. It might just be a conflict with xposed or something else I'm running.
Click to expand...
Click to collapse
GFixx said:
I have a bug with automatic screen brightness, if I unlock the phone at the sun I do not see almost nothing
G800F ITV 1CQA1
Someone can confirm?
(GPS and Volume seems fine)
Click to expand...
Click to collapse
milad9896 said:
I also have this problem sometimes
Click to expand...
Click to collapse
So far I've tried running the phone without anything on it like Xposed or any apps beside the stock ones and it hasn't fixed the issue. What I do know is that it's definitely not a hardware issue since the light sensor works as it's supposed - you can test yours by entering the service menu by typing *#0*# from the dialer. I am currently running the German DBT firmware but I'm currently in the process of flashing the South East Europe SEE firmware which is different only in the security patch, so if the problem persists then I will know for sure it's not a DBT-only problem.
How many of you have this issue as well? Also, which version of the firmware are you running?
Me too. Also DBT FW with 6.01. Flashlight has also an issue in the dark.
Gesendet von meinem SM-G800F mit Tapatalk
I wrote to Samsung to report the brightness bug and they said
"I'm sorry about the problem you are having, but are not officially anomalies on this issue."
"This is because with the automatic adjustment of brightness, of course, the stronger the external light source, the lower the brightness of the device.
In any case, since the restore operation has had positive consequences, I invite you to use the manual brightness adjustment when you can not see the screen properly.
alternatively, if the problem is particularly heavy, you will be able to view the problem at one of our authorized service centers. "
Myke72 said:
Me too. Also DBT FW with 6.01. Flashlight has also an issue in the dark.
Gesendet von meinem SM-G800F mit Tapatalk
Click to expand...
Click to collapse
I am currently running the South East Europe (SEE) firmware but I haven't tested it extensively so I can't say if it's any better.
GFixx said:
I wrote to Samsung to report the brightness bug and they said
"I'm sorry about the problem you are having, but are not officially anomalies on this issue."
"This is because with the automatic adjustment of brightness, of course, the stronger the external light source, the lower the brightness of the device.
In any case, since the restore operation has had positive consequences, I invite you to use the manual brightness adjustment when you can not see the screen properly.
alternatively, if the problem is particularly heavy, you will be able to view the problem at one of our authorized service centers. "
Click to expand...
Click to collapse
So Samsung's solution for this is to use manual brightness? Really Samsung?
I have the same after upgrade to 6.0.1, it's unbelievable such a bug in official release
any fix for this?
I installed Auto Brightness app, but it seems Samsung display goes above 100% in sun, third party apps can't do it
Does anyone have realy bad battery Problems too? (See my thread...)
GFixx said:
I wrote to Samsung to report the brightness bug and they said
"I'm sorry about the problem you are having, but are not officially anomalies on this issue."
"This is because with the automatic adjustment of brightness, of course, the stronger the external light source, the lower the brightness of the device.
In any case, since the restore operation has had positive consequences, I invite you to use the manual brightness adjustment when you can not see the screen properly.
alternatively, if the problem is particularly heavy, you will be able to view the problem at one of our authorized service centers. "
Click to expand...
Click to collapse
I have the same problem - I made a video of it below. It's a serious usability problem - makes it very hard to use in sunlight.
As a kind of workaround you can put your thumb over the light sensor as you wake it up, then it will wake up dim but still visible. Eventually it will adjust and brighten to match the sunlight. But this is slow and awkward and needs two hands.
The reply you got from Samsung is ridiculous. For a start, the stronger the external light source, the stronger the brightness of the device - they have it the wrong way around. Anyway, it is obviously a major usability problem and I can't believe they are dismissing it. (And manual brightness is not an answer of course.)
Phone specification:
Model number: SM-G800F
Android version: 6.0.1
Baseband version: G800FXXU1CQA1
Kernel version: 3.4.39-10294723 [email protected]#1 Wed Jan 4 12:03:16 KST 2017
Build number: MMB29K.G800FXXU1CQA1
SE for Android status: Enforcing SEPF_SECMOBILE_6.0.1_0033 Wed Jan 04 12:28:05 2017
It works fine on my G800H with latest Polish stock ROM
I don't use to write in the forum, but I must say 'me too'. If someone knows a working Marshmallow ROM for the G800F. The thumb "workaaround" is the only one working for me..
I strongly encourage everyone facing this problem to write an e-mail to Samsung through their official website. In your e-mails make sure you note that this problem is definitely caused by a software issue and not a hardware issue - the auto brightness worked fine with KitKat and Lollipop, but not with Marshmallow. We need to bring this to their attention so they can fix it in a firmware update and the only way to do this is to send them as many reports as possible.
kom-pakt said:
I strongly encourage everyone facing this problem to write an e-mail to Samsung through their official website. In your e-mails make sure you note that this problem is definitely caused by a software issue and not a hardware issue - the auto brightness worked fine with KitKat and Lollipop, but not with Marshmallow. We need to bring this to their attention so they can fix it in a firmware update and the only way to do this is to send them as many reports as possible.
Click to expand...
Click to collapse
I'll do this. Do you know the best email address to use? Also I'll drop in at the nearby Samsung shop (hopefully on a sunny day) and see what they say.
I'm surprised that this bug isn't much more widely talked about given that it's a major usability problem, and given that the S5 mini is a popular phone (hundreds of thousands, maybe millions?, sold). So I wonder if it's possible that there is something special about our phones, and the bug doesn't happen on most people's devices. But I can't think what it would be. I've not done anything unusual with my phone - it's just a standard out-of-the box phone running the official operating system.
alex3453 said:
I'll do this. Do you know the best email address to use? Also I'll drop in at the nearby Samsung shop (hopefully on a sunny day) and see what they say.
I'm surprised that this bug isn't much more widely talked about given that it's a major usability problem, and given that the S5 mini is a popular phone (hundreds of thousands, maybe millions?, sold). So I wonder if it's possible that there is something special about our phones, and the bug doesn't happen on most people's devices. But I can't think what it would be. I've not done anything unusual with my phone - it's just a standard out-of-the box phone running the official operating system.
Click to expand...
Click to collapse
Use the official Samsung website (for your region) to report the issue. Browse a bit and you'll find the form.
It's strange that the number of people affected by this issue seems relatively small, keeping in mind that XDA is a forum where a typical user is usually a power user. Also it's not a region-specific issue or caused by an app or something else. For example I thought that maybe Xposed is causing a conflict so I did a complete wipe and flashed a fresh firmware, used the phone like that without any apps for a couple of days but the autobrightness issue was still there. Tried a different firmware version as well but nothing helps. Again, it's definitely not a hardware issue - test yours by typing *#0*# from the dialpad to enter the service menu and test the sensor yourself.
I solved the problem disabling the automatic brightness function and using Lux Lite as workaround instead
I have this issue too. Hungary (Telenor) G800FXXU1CQA1. The service does not find any problem. I refered severel minor issues (among autobrightness failure), but I did not managed to talk to them, and they wrote that there is not any hardware problem with the phone. They recalibrated the sensors, so that might help.
Lux Lite solved the problem, thanks!
Hello I have the brightness issue too (G800FXXU1CQD1) official french ROM, since I upgraded to 6.0.1.
I also had some strange charging issue.
I tried with different wall chargers. When I plug them, the charging led doesn't turn on. The battery charging icon in the status line on top doesn't indicate charging.
But if I leave the device for some time and reboot, the battery level increases. So it means that it charges !!
Once I tried removing battery and it recovered, but not every time...
ffoucault said:
I solved the problem disabling the automatic brightness function and using Lux Lite as workaround instead
Click to expand...
Click to collapse
bravur said:
I have this issue too. Hungary (Telenor) G800FXXU1CQA1. The service does not find any problem. I refered severel minor issues (among autobrightness failure), but I did not managed to talk to them, and they wrote that there is not any hardware problem with the phone. They recalibrated the sensors, so that might help.
Lux Lite solved the problem, thanks!
Click to expand...
Click to collapse
Lux Lite is only a workaround, but not an acceptable solution. That would be an official update from Samsung which solves the problem caused by their original update.
foulke said:
Hello I have the brightness issue too (G800FXXU1CQD1) official french ROM, since I upgraded to 6.0.1.
I also had some strange charging issue.
I tried with different wall chargers. When I plug them, the charging led doesn't turn on. The battery charging icon in the status line on top doesn't indicate charging.
But if I leave the device for some time and reboot, the battery level increases. So it means that it charges !!
Once I tried removing battery and it recovered, but not every time...
Click to expand...
Click to collapse
Did you try the basic stuff like reflashing the firmware and such?
kom-pakt said:
Lux Lite is only a workaround, but not an acceptable solution. That would be an official update from Samsung which solves the problem caused by their original update.
Did you try the basic stuff like reflashing the firmware and such?
Click to expand...
Click to collapse
No. I don't want to use Odin for the moment.
By the way I installed Lux, and it works fine.
I'm surprised you're happy with Lux, official Samsung can do much more brighter screen in strong sun then Lux
By the way, I removed Lux since. Because it requires too much app permission than I think it should (contacts...)
So I'm looking for an another solution
Good news!
Yesterday I jus tried to install the latest firmware available on sammobile (for G800F) - the one for nordic countries -.. and now the brightness control is working perfectly!
Seems that this 'not' problem was fixed in latests releases :good:

Samsung galaxy note 8 sensors not working

Hello,
My Galaxy Note 8 GT-N950F sensors are not working. Proximity, heart rate, barometer, rotation, iris scanner and other sensors are not working.
Any HELP please !
Happened today, i saw some people got same issues since the new Android 8.0 updates.
ANYONE HELP ME PLEASE!!!
Did you check sensors from test menu:
*#0*# (in phone/dialer)?
Yes already dialed. Nothing is working. Download CPU-Z too, nothing is working. Hard reset too. Same issues.
Any other solution?
lerider96 said:
Yes already dialed. Nothing is working. Download CPU-Z too, nothing is working. Hard reset too. Same issues.
Any other solution?
Click to expand...
Click to collapse
Same thing happened to a friend on 7.1.1 with a 950F.
He had to claim warranty on it since we tried multiple firmware's, but nothing brought the sensors back.
lerider96 said:
Hello,
My Galaxy Note 8 GT-N950F sensors are not working. Proximity, heart rate, barometer, rotation, iris scanner and other sensors are not working.
Any HELP please !
Happened today, i saw some people got same issues since the new Android 8.0 updates.
ANYONE HELP ME PLEASE!!!
Click to expand...
Click to collapse
its a motherboard problem... it happened to me too, I did everything... so i brought it to Samsung, and they said its the motherboard, so they replaced the motherboard for free (its still under warranty) and now its working perfectly
lerider96 said:
Hello,
My Galaxy Note 8 GT-N950F sensors are not working. Proximity, heart rate, barometer, rotation, iris scanner and other sensors are not working.
Any HELP please !
Happened today, i saw some people got same issues since the new Android 8.0 updates.
ANYONE HELP ME PLEASE!!!
Click to expand...
Click to collapse
Go to Samsung ASAP to get it fixed under warranty
I've claimed the warranty, still waiting for the phone
Will I lose all my stuff on the phone? Or will It be the same?
lerider96 said:
I've claimed the warranty, still waiting for the phone
Will I lose all my stuff on the phone? Or will It be the same?
Click to expand...
Click to collapse
Chances are you won't get your exact phone back. But a refurbed one. Just use samsung backup app. Works pretty well. And of course factory reset afterwards.
I'm having the same issue with my device past few days (Exynos Chip)
My reply was here.
https://forum.xda-developers.com/showpost.php?p=77245884&postcount=7
Hey everyone I'm facing the same problem on my note8. All sensors stoped working but they were working before on 7.1.1 and i updated my device to oreo and realized all sensors stoped
Then i got another updated for about 900mb i thought maybe this update will fix them and also that update said tha after updating the user cannot downgrade to nougat but after updating the problem still exsist. Please if anyone can help i also try to flash same oreo firmware with odin but doesn't fixed the sensors
coolsongs95 said:
Hey everyone I'm facing the same problem on my note8. All sensors stoped working but they were working before on 7.1.1 and i updated my device to oreo and realized all sensors stoped
Then i got another updated for about 900mb i thought maybe this update will fix them and also that update said tha after updating the user cannot downgrade to nougat but after updating the problem still exsist. Please if anyone can help i also try to flash same oreo firmware with odin but doesn't fixed the sensors
Click to expand...
Click to collapse
I haven't experienced it myself, but previous posts in the thread indicate a hardware problem... If you already flashed the latest stock firmware with full wipe and it's still not working, then it seems to confirm that hardware issue.
sefrcoko said:
I havent experienced it myself but previous posts in the thread indicate a hardware problem... If you flashed latest stock firmware with full wipe and it's still not working, then it a hardware issue seems likely.
Click to expand...
Click to collapse
But i saw some post saying that Samsung fixed there note 8 without opening the device and it also happened to me after software update to oreo maybe it is just software problem and also saw some post about xiaomi devices got this problem by software update. And i use my device with so much care "Please Help me"
coolsongs95 said:
But i saw some post saying that Samsung fixed there note 8 without opening the device and it also happened to me after software update to oreo maybe it is just software problem and also saw some post about xiaomi devices got this problem by software update. And i use my device with so much care "Please Help me"
Click to expand...
Click to collapse
Can you find those posts you mentioned and link them here? If it's software related then flashing the latest stock firmware should help. Did you do a full wipe and used csc instead of home_csc in Odin (along with the other firmware files)?
sefrcoko said:
Can you find those posts you mentioned and link them here? If it's software related then flashing the latest stock firmware should help. Did you do a full wipe and used csc instead of home_csc in Odin (along with the other firmware files)?
Click to expand...
Click to collapse
i'm really sorry but can not link them because i saw so many websites and can't remember and yeah i flashed all files with odin but this also don't work any other solution and also saw a video on youtube about xiaomi device sensors stoped after software update
As some buddies stated before, take your device to claim warranty, that's it
I'm getting GPS errors lately, very very weak satellite signals even under 100% sky, I don't know if they are related. Ugh, so much for a $1000 phone
Echoing the responses of others. I would take your device to either the retailer or a Samsung Service Center. As this is probably a motherboard issue.
Facing same issue, all sensors not working. Will be going to care center tomorrow.
I had this problem after I had my phone led screen repaired (under warranty at samsung). Lucky I check everything after every repair.
They took the phone back and got it fixed in 5 minutes. Said the tech forgot to flash in some files.no idea what files but all they did was change the screen and battery.
Sent from my SM-N950F using Tapatalk
rockman_x said:
its a motherboard problem... it happened to me too, I did everything... so i brought it to Samsung, and they said its the motherboard, so they replaced the motherboard for free (its still under warranty) and now its working perfectly
Click to expand...
Click to collapse
No its not a hardware problem and samsung knows this only happening to the xynos versions and if all ur sensors were working fine how the fock after u update to their ****ty oreo update that they didnt take the time to do ur sensors stoped work its like when apple sent the update to the iphone 5s now the finger print sensors dont work.

New firmware?

Hi guys is any of you guys has new firmware? 4_22B?
if you do how tp get it?
https://ibb.co/nbkqdfs
echocae said:
Hi guys is any of you guys has new firmware? 4_22B?
if you do how tp get it?
https://ibb.co/nbkqdfs
Click to expand...
Click to collapse
How to get it... apply for a job @ Nokia.... learn the definition of the last character of the firmware build... it says B guess what it means.
So unless it gets leaked, which most likely won't happen, you've to wait for an A
Hawkysoft said:
How to get it... apply for a job @ Nokia.... learn the definition of the last character of the firmware build... it says B guess what it means.
So unless it gets leaked, which most likely won't happen, you've to wait for an A
Click to expand...
Click to collapse
well if B is Beta.. then A.. is Alpha... so we need F.. Full Version...:laugh:
That looks legit and could be the new release. I wouldn't pay much attention to the letters. There's new builds of touch and camera firmware, which could mean lesser issues with the fingerprint sensor and the camera errors.
Apparently nokia said via Twitter that they had some one time issue in getting the security release on time. That we should expect a FM this week. Not sure if it is true. But I'm disappointed that they don't honor the Android One promise
I'd much rather prefer they get the update right in terms of fixing whatever camera issues/fingerprint sensor they resolved than getting it sooner half-baked that will require yet another update.
My stable version has a F in the end
isopure said:
I'd much rather prefer they get the update right in terms of fixing whatever camera issues/fingerprint sensor they resolved than getting it sooner half-baked that will require yet another update.
Click to expand...
Click to collapse
Yeah for the camera I don't mind to wait. But for the security updates I do mind to wait as this is a separate update that has nothing to do with camera
There is updateV.4.22C .Just instaling ( in Poland )
Netherlands as well
India!
Also in Spain.
New update build number
I just updated to the latest update, fingerprint enrollment hasbeen update, Its quite reliable and has a more success rate, still slow but I don't mind it since not tell me to press harder like before, hope it gets better with future updates.:laugh:
Never mind fingerprint. Camera is what most people bought this phone, and it was horiblle also ( I mean app ).Lot's of bugs
Any release notes?
Just applied update
Fingerprint reader is now perfect though aesthetically the small brackets around the thumbprint distract. Can't say anything about camera.
250Mb. Took a very long time to install over a fast wifi connection. I was afraid that I had bricked my phone.
United States. T-Mobile. Unlocked phone.
The bug in translation in Camera app still present (bokeh). Fingerprint sensor almost as ****ty as it was. I deleted all fingerprints and added four new. Press harder...
FP still ****.. maybe due to screen protector too thick...
Camera is improve littlebit Manual still have bug eventhou u set the shutter speed still go automatic
Pro mode is still buggy i think..When cam set to "ISO prority" ( ISO set on 100 ) assuming, that camera mesures exposition automatically, the time suppose to be selected in auto position, and it all suppose to give proper exposition. But when ISO is set , time goes itself to 1/33 sec, that gives total underexposition. Time has to set manually based on the display preview to have things to work. So does it mean, that in Pro mode exposition hase to be set manually, or it is another bug? Timer sound in Cam app ,still not working correctly
No... In pro mode everything is manual

Categories

Resources