can not install HSPL - HD7 Q&A, Help & Troubleshooting

I have 1 Phone HTC Schubert
SPL-1.60
I use DFT to HSPL but it always back to OSPL
Pls view video
Mod edit: YT link removed
Pls show me the way to instal HSPL

Related

[suggestions]

Hello everybody!!!
I'm from Cambodia.I use HD TOUCH HD with Original ROM WM6.1.I want to upgrade to WM6.5.I downloaded Energy ROM6.5,Dutty ROM 6.5,and Miri ROM 6.5 I really like these Roms and I want to use it in my phone,but when I upgrade and use it it has the same problems :
1.Run not smooth(if I try to touch or open more programs my phone will restart).
2.The simcard in my phone not detect(It doesn't has my country in the list).
What should I do with these problems?
It sounds like you have not followed the steps in the guide (see link in my signature). You need to first upgrade your SPL from the stock version to either USPL 1.54 or HSPL 1.56. Read the guide and follow the steps.
Follow flashing guide in either ClydeB1's signature or my signature and post further queries there regarding USPL, HSPL or flashing.
Thread closed

ospl returns after rspl

A newbie question. Is it normal for the original bootloader(ospl) to return after installing custom rom with rspl? Another thing that puzzles me was that after getting rspl when RUU was updating i notice rspl was no more there, luckily it stop at 0% so i remove the usb and did the rspl again only this time i continue with installing Deepshinng. Lucky for me it went tru without a hitch. So i am wondering do i have to do the rspl everytime i want to change rom? As i do it very often would appreciate a helpful reply as i dun wanna screwup. Thanks.
My ospl was 1.69 the rspl was 3xxx but now i m back to 1.69 with Deepshinning.
ndmuni said:
A newbie question. Is it normal for the original bootloader(ospl) to return after installing custom rom with rspl? Another thing that puzzles me was that after getting rspl when RUU was updating i notice rspl was no more there, luckily it stop at 0% so i remove the usb and did the rspl again only this time i continue with installing Deepshinng. Lucky for me it went tru without a hitch. So i am wondering do i have to do the rspl everytime i want to change rom? As i do it very often would appreciate a helpful reply as i dun wanna screwup. Thanks.
My ospl was 1.69 the rspl was 3xxx but now i m back to 1.69 with Deepshinning.
Click to expand...
Click to collapse
read more on the RSPL thread... if you want the bootloader to be there without having to load RSPL every time, you load RSPL, then load HSPL
5ft24 said:
read more on the RSPL thread... if you want the bootloader to be there without having to load RSPL every time, you load RSPL, then load HSPL
Click to expand...
Click to collapse
Indeed... RSPL is temporary. HSPL is permanent*, but you need RSPL before you can flash HSPL.
*permanent until you flash over it
Thanks guys, I'd rather stick to rspl for now and be more careful, and later hspl when i know what i'm doing.
You should just flash RSPL, then immediatelt flash HSPL... it will save time when you get into flashing more Rom's.

Downgrade HTC HD7 / NoDo ? need help

Hello ,
so i have a problem with my new hd7 wp7
i want to install this one ---> http://forum.xda-developers.com/showthread.php?t=1271118
sooo my phone info :
SPL-5.10.2250.0(131983)
system : 7.10.7740.16
firmwareversion: 2250.21.51002.207
the 207 is important ... correct?
so , i have over 3,,,, (1. If you have MANGO with SPL 4.xx or 5.xx in your device, flash a NODO Rom first to downgrade SPL otherwise you´ll brick it.) and i search this one ----> http://forum.xda-developers.com/showthread.php?t=1017116
by step 3 I get ERROR 265 by 1% the system reboot and start new ....
Can anyone tell me what I am doing wrong ?
sorry for the bad englisch i have translate with google
.
Thread moved to Q&A due to it being a question. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.
see Step #6b or Step #7 from here.
use Pre-NoDo or NoDo Shipped ROM from here.
xsid said:
Hello ,
so i have a problem with my new hd7 wp7
i want to install this one ---> http://forum.xda-developers.com/showthread.php?t=1271118
sooo my phone info :
SPL-5.10.2250.0(131983)
system : 7.10.7740.16
firmwareversion: 2250.21.51002.207
the 207 is important ... correct?
so , i have over 3,,,, (1. If you have MANGO with SPL 4.xx or 5.xx in your device, flash a NODO Rom first to downgrade SPL otherwise you´ll brick it.) and i search this one ----> http://forum.xda-developers.com/showthread.php?t=1017116
by step 3 I get ERROR 265 by 1% the system reboot and start new ....
Can anyone tell me what I am doing wrong ?
sorry for the bad englisch i have translate with google
Click to expand...
Click to collapse
you can try the goldcard method too if you want.
Hello - I want to sell my HTC HD T-Mobile branded phone. Before I do that I want to reset it back to it's original factory format. Either Pre-Nodo or Nodo is the preference or even if there is an original ROM from when the phone was first released.
Can someone point me to the right ROM? There are so many !
Thanks,
Paul
Hey everyone.. I used this one...
RUU_Schubert_TMOUS_1.18.531.01_Radio_5.51.09.11a_22.31.50.09_Signed_SCHUBERT_RELEASE
And then let all the updates happen !
Now off to sell the phone.....
Help?
My firmware is 2250.xx.xxxxx.707....and its Mango with SPL 5.12
isit possible for me to do a noDo ?
SPL 5 doesnt allow you to downgrade to a prenodo or nodo rom. use goldcard method posted here:
http://forum.xda-developers.com/showthread.php?t=1597837

[Q] Many thank for any help

Hi,
I over 5 weeks try to unlocked my HTC HD7 device but without any results
And I asked your help.
I have HTC HD7 with these details:
OS version : 7.10.7740.16
Firmware number :2250.21.51003.206
Radio version:5.71.09.2a_22.51.50.21U
Radio hardware version:A.102.0.D4
Bootloader : 5.11.2250.0(1234400)
Chip SOC version :2.2.2.0
Any ROM that I try to install the process stop on 0%
Many thank for any help
well sorry to say but you will never install any rom with bootloader 5.11
you have to install cotulla HSPL first and them rom
cheers
jhonny said:
well sorry to say but you will never install any rom with bootloader 5.11
you have to install cotulla HSPL first and them rom
cheers
Click to expand...
Click to collapse
TNX. can you plase tel me how or gibe a link for it ?
i was try to search but withou ant reselts ...
first put phone into bootloader tri colour and see what info there.... have to see if you can install HSPL
jhonny said:
first put phone into bootloader tri colour and see what info there.... Have to see if you can install hspl
Click to expand...
Click to collapse
pd29100 ss-bc (4k)
spl-5.11.2250.0(134400) mng
microp(led) 0x07
touch s1(v1.8,#1624)
ok...good news yes you can install HSPL and then custom rom
sh4d0w86 has the best instructions to install custom Rspl/HSPL
follow his instructions.
http://forum.xda-developers.com/showthread.php?t=1295068
if you need any more help just ask
cheers and have a gr8 day
jhonny said:
ok...good news yes you can install HSPL and then custom rom
sh4d0w86 has the best instructions to install custom Rspl/HSPL
follow his instructions.
http://forum.xda-developers.com/showthread.php?t=1295068
if you need any more help just ask
cheers and have a gr8 day
Click to expand...
Click to collapse
i was try this but i get message : ERROR [294] : INVALID VENDER ID
hi erezhavida
did you follow sh4d0w86 step by step instrunctios?
you have bootloader 5.11... first you have to downgrade HSPL to less the 3.x
have you done that?
you cant install HSPL or rom until you downgrade
cheers and have a gr8 day
jhonny said:
hi erezhavida
did you follow sh4d0w86 step by step instrunctios?
you have bootloader 5.11... first you have to downgrade HSPL to less the 3.x
have you done that?
you cant install HSPL or rom until you downgrade
cheers and have a gr8 day
Click to expand...
Click to collapse
Hi Jhonny,
Yes , i was followsh4d0w86 step by step instrunctios and go to this link: http://forum.xda-developers.com/showthread.php?t=1411904
after i downloaded RUU_Schubert_HTC_Europe_5.10.401.04_SLSPL_Signed_by_ansar i got the error message.
hi erezhavida
you get that error msg when rom is wrong region
you have to find earlier rom for your region
your Firmware number :2250.21.51003.206 last number...206 is your region
look for older stock rom ending in 206
try that....that should then downgrade your HSPL
cheers and have a gr8 day
jhonny said:
hi erezhavida
you get that error msg when rom is wrong region
you have to find earlier rom for your region
your Firmware number :2250.21.51003.206 last number...206 is your region
look for older stock rom ending in 206
try that....that should then downgrade your HSPL
cheers and have a gr8 day
Click to expand...
Click to collapse
hi jhonny, do you mean downgrade the HSPL this way?
http://forum.xda-developers.com/showthread.php?t=893152
hi...
I recently bought a new hd7 but while downgrade spl i half bricked my phone.
But using the goldcard method i was able to re alive my phone again.
you first see that what position is in your boot loader screen then you will use next methods. This goldcard method is for half bricked set where you will not see any serial option in bottom.
Your can use your device but can,not install rom anymore.

[Q] Can I install dynamics v2.0?

I want to install HSPL to be able to install custom ROM dynamics v2.0. But, it says you should not continue if you have SPL version 4.xxx or 5.xxx. I should have1.xx, 2.xx, or 3.xx to install the HSPL.
I came to know another solution to the problem by downgrading the SPL using NoDo.
What should I do? Can i install HSPL after downgrading my HSPL version using NoDo? Will that brick my phone?
My plan is to use NoDo to first downgrade my SPL from 5.xx to anything that is supportedby the HSPL, then I'll install HSPL by DFT, and then finally install a custom ROM called Dynamics v2.0.
Should I go through the whole process for installing a custom ROM on my phone?
Do let me know if you want to know something about the phone like the OS version, exact SPL version, etc
Have you searched for it?
You must use Y-Cable and the goldcard method... It is written in several threads, I recommend you "noobs guide no android", search for it I won't give you any lazy link...

Categories

Resources