Database Develop

Softbricked after OTA update SM-N900A

AT&T version of this thread: http://forum.xda-developers.com/showthread.php?p=47413669
Started with N900AUCUBMI9, rooted via RDLV (N900AUCUBMI9_OneClickBin)
accepted OTA update (i know) to N900AUCUBMJ5, lost root
Wanted root back, attempted RDLV again, got SECURE CHECK FAIL : cache, stuck in "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Found this thread: http://forum.xda-developers.com/showthread.php?p=47411605
Flashed PIT ONLY, successfully booted up into MJ5, unrooted. Should have left it alone there. KNOX flag 0x0
Wanted root back, thought I could downgrade BL, AP/PDA, Phone, CPC to MI9 as suggested in above thread.
BL fails with SW REV CHECK FAIL : [sbl1]Fused 2 > Binary 1. AP/PDA, fails with SECURE CHECK FAIL : system. Phone successfully flashed to MI9. CPC fails with SECURE CHECK FAIL : cache
Stuck in "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Flashed PIT again, phone tries to boot but "Process system isn't responding" after AT&T globe boot animation, then reboots
Attempted RDLV again, get SW REV CHECK FAIL : [sbl1]Fused 2 > Binary 1, presumably because the MI9 BL can't be flashed over the MJ5 BL.
I'm stuck folks. Any suggestions welcome. Am I just going to have to wait for a stock MJ5 package/files similar to the MI9 files in the thread above?
For those reading who were dummies like me and accepted the OTA update, lost their root, tried to re-root with RDLV: flash the PIT file ONLY from the above link and you should be back into MJ5, un-rooted.
Help please?

Well lets see here. I was rooted (Kingo) <Updated ver.
I saw the update.
Un-rooted with the SuperSU app.
Did the update
Re-rooted with Kingo.
Re-did all xposed/winam stuff.
Rebooted
Phone is on new firmware with root and I'm loving it.
The End.

LuckyColdJohnson said:
Well lets see here. I was rooted (Kingo) <Updated ver.
I saw the update.
Un-rooted with the SuperSU app.
Did the update
Re-rooted with Kingo.
Re-did all xposed/winam stuff.
Rebooted
Phone is on new firmware with root and I'm loving it.
The End.
Click to expand...
Click to collapse
yes, that's the way i should have done it (SU persist, un-root, OTA, SU root) but I didn't and now here i am.

I followed the info to flash PIT only and my phone rebooted. Now fc's allot of stuff. Can't get past it. Build number mi9, baseband mj5. Do you think someone will make an mj5 odin? Or any advice would be greatly appreciated.

Same here
Same situation here ;_; can you post just the Pit? the zip is taking forever for the fact that I just need an XML file.

ditto
+1 I was updated and rooted and decided to jack around with a data toggle in notification (/data/data/com.android.providers.settings/databases/settings.db) and here i am

So I flashed the .pit
which let me reboot.
However now I'm in a horrible limbo state where pen imput crashes in an infanite loop making anything on the phone painful to do.
I think it's because my PDA and CSC are MI9 but my phone updated to MJ5.
I tried recovery mode wipe and "reset Phone" in settings and the issues persist.
This lovely mismatch has also rendered my ability to install firmware via Kies imposible. Nulling my plan to just roll back to stock.
Anybody have an odin one click for MJ5? I'd rather be stock than inoperable.
I'm afraid to try the method listed above for Knox flag reasons. If rolling back to MI9 is unreliable and might throw flags.
Hope someone else gets further than I have soon.

LuckyColdJohnson said:
Well lets see here. I was rooted (Kingo) <Updated ver.
I saw the update.
Un-rooted with the SuperSU app.
Did the update
Re-rooted with Kingo.
Re-did all xposed/winam stuff.
Rebooted
Phone is on new firmware with root and I'm loving it.
The End.
Click to expand...
Click to collapse
Where is this kingo?
Sent from the phone with the best specs on the market, "NoTe III"

mnorris0678 said:
+1 I was updated and rooted and decided to jack around with a data toggle in notification (/data/data/com.android.providers.settings/databases/settings.db) and here i am
Click to expand...
Click to collapse
I soft bricked my phone probably 5 or 6 times before getting it to work!
Sent from my SAMSUNG-SM-N900A using Tapatalk

tyiphius said:
I soft bricked my phone probably 5 or 6 times before getting it to work!
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
Would you do us a solid, and elaborate on how you fixed it?

bloodyRevolver said:
I'm afraid to try the method listed above for Knox flag reasons. If rolling back to MI9 is unreliable and might throw flags.
Hope someone else gets further than I have soon.
Click to expand...
Click to collapse
FYI, nothing that I have domes so far has tripped KONX. Still at 0x0

bloodyRevolver said:
Would you do us a solid, and elaborate on how you fixed it?
Click to expand...
Click to collapse
+1

Sweet. Your OP lead me to believe that you tripped it somewhere. Honestly I'm beginning to care less and less about it. I honestly think that with a full ODIN of the current OTA WE'd be back in the clear. The inability to roll back after The thing updated without my permission is frustrating to say the least. Coming from iOS I'm also a bit surprised by the lack of OEM firmware existing in the wild.

settings.db
Might anybody have a stock unmodified /data/data/com.android.providers.settings/databases/settings.db file that i can try loading with adb?

Resolved issue with at&t.
Couldn't handle waiting for SM-N900A stock firmware so I took my phone to AT&T retail store (I didn't have warranty with them). They referred me to At&t Device support center and told me that I have a manufacture warranty with samsung for 1 year and since i didn't have any water damage or such, just a boot loop, i can just exchange it for a "like-new" product and might ship between 6 business days.

nikeflight19 said:
Couldn't handle waiting for SM-N900A stock firmware so I took my phone to AT&T retail store (I didn't have warranty with them). They referred me to At&t Device support center and told me that I have a manufacture warranty with samsung for 1 year and since i didn't have any water damage or such, just a boot loop, i can just exchange it for a "like-new" product and might ship between 6 business days.
Click to expand...
Click to collapse
I was offered the same deal. Preferred to hold out hope that we'd get an MJ5 firmware ripped and running before that.

Where can I find this pit file?
WHERE CAN i FIND THE PIT FILE
hunterdg said:
AT&T version of this thread: http://forum.xda-developers.com/showthread.php?p=47413669
Started with N900AUCUBMI9, rooted via RDLV (N900AUCUBMI9_OneClickBin)
accepted OTA update (i know) to N900AUCUBMJ5, lost root
Wanted root back, attempted RDLV again, got SECURE CHECK FAIL : cache, stuck in "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Found this thread: http://forum.xda-developers.com/showthread.php?p=47411605
Flashed PIT ONLY, successfully booted up into MJ5, unrooted. Should have left it alone there. KNOX flag 0x0
Wanted root back, thought I could downgrade BL, AP/PDA, Phone, CPC to MI9 as suggested in above thread.
BL fails with SW REV CHECK FAIL : [sbl1]Fused 2 > Binary 1. AP/PDA, fails with SECURE CHECK FAIL : system. Phone successfully flashed to MI9. CPC fails with SECURE CHECK FAIL : cache
Stuck in "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Flashed PIT again, phone tries to boot but "Process system isn't responding" after AT&T globe boot animation, then reboots
Attempted RDLV again, get SW REV CHECK FAIL : [sbl1]Fused 2 > Binary 1, presumably because the MI9 BL can't be flashed over the MJ5 BL.
I'm stuck folks. Any suggestions welcome. Am I just going to have to wait for a stock MJ5 package/files similar to the MI9 files in the thread above?
For those reading who were dummies like me and accepted the OTA update, lost their root, tried to re-root with RDLV: flash the PIT file ONLY from the above link and you should be back into MJ5, un-rooted.
Help please?
Click to expand...
Click to collapse

nabooki said:
WHERE CAN i FIND THE PIT FILE
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2502049
First page of the second link you posted. It's in the zip with all the other MI9 files. If you look further down the thread he also posted another version of the PIT. Read read read read.

Hello all.. Been gone for a bit. Catching up now and hoping for a solution but if anyone has figured this out, please let me know how or provide a link! (Mj5 Odin stock recovery)

[Q] Att Note 3 on Lollipop

I have a note 3, that I'd like to root and install a non Att OS.. it's no longer a covered phone..and I don't care about tripping knox.. Searching for Root and Note 3 and ATT find all kind of way to root and install safestrap.. is that the only way to custom rom this phone?

crysallis said:
I have a note 3, that I'd like to root and install a non Att OS.. it's no longer a covered phone..and I don't care about tripping knox.. Searching for Root and Note 3 and ATT find all kind of way to root and install safestrap.. is that the only way to custom rom this phone?
Click to expand...
Click to collapse
What are you running right now Kitkat, Lollipop? If you are on N900AUCUCNC2, you can use Towel root https://towelroot.com/ or Kingo root http://www.kingoapp.com/ The only way to install custom rom is to have Safestrap install as the bootloader is locked.

Rooted i747 said:
What are you running right now Kitkat, Lollipop? If you are on N900AUCUCNC2, you can use Towel root or Kingo root
Click to expand...
Click to collapse
I'm not the OP, but I have the same question: I have a stock Note 3 with Lollipop (N900AUCUEOC1). I'd love to root it. Is there a step-by-step guide, or better yet a tap-and-go app to achieve root?

Hiram_Q_Pustule said:
I'm not the OP, but I have the same question: I have a stock Note 3 with Lollipop (N900AUCUEOC1). I'd love to root it. Is there a step-by-step guide, or better yet a tap-and-go app to achieve root?
Click to expand...
Click to collapse
You can't root OC1, but you can use Odin to downgrade to NC2 and root it. Odin v.3.10.6 http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613. Once you Odin back you can use Towel root or Kingo root (links are posted above your post). Then install Supersu https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and run it, install Busybox https://play.google.com/store/apps/details?id=stericson.busybox&hl=en open and install it, then Safestrap http://forum.xda-developers.com/devdb/project/dl/?id=7216. (You should make a backup once Safestrap is installed before you flash any Roms). Once you're done you can pick a Rom for your Note 3 http://forum.xda-developers.com/note-3-att/development Now you ever use Odin? http://www.samsungodindownload.com/odin-tutorial/ (The site only shows flashing the All-In-One file so you know). Use all 4 Odin files, N900AUCUCNC2 ODIN Files, BL https://www.androidfilehost.com/?fid=96042739161891602 AP https://www.androidfilehost.com/?fid=96042739161891890 CP https://www.androidfilehost.com/?fid=96042739161891603 CSC https://www.androidfilehost.com/?fid=96042739161891604

Brilliant! I'm rooted on Lollipop, and loving my Note 3 all over again. Thanks for the easy-to-follow instructions, that made it a breeze!

lil differant way
To shorten the process, I downloaded Chainfires app called FlashFire, Then Downloaded full OC1 odin tar and Full N2 Odin tar. I flashed Note 3 back to N2 with pc odin, I then transferred OC1 to my sd card installed Flashfire and used flash Fire to do a complete flash to OC1 while choosing to inject everroot. Saved tons of time and in my mind a lot cleaner. I also have ROM PRO TOOL BOX and Chainfires CF-Bench after installing all the apps I wanted and setting up my personal settings on the phone all together, I installed BusyBox Pro and did a smart install, then rebooted and performed a benchmark. Then opened Rom Pro Tool box and went to cpu and then the benchmark it recognized the benchmark from chainfires cf-bench app so I choose it and also clicked apply at boot. Rebooted and this Note is fast as light and reliable. FlashFire will make back ups for you if your worried about recovery and always a good Idea to have Helium and or Titanium to make a nandriod and a completed setup back up to store on your pc and cloud just in case. :fingers-crossed:

Does anyone know if Rooting directly from OC1 without a wipe is being worked on? :fingers-crossed: or should I just stop whining and just do one of the above options? :victory:

debugrr said:
Does anyone know if Rooting directly from OC1 without a wipe is being worked on? :fingers-crossed: or should I just stop whining and just do one of the above options? :victory:
Click to expand...
Click to collapse
Do from post #4

Help! Stuck on AT&T load screen after Odin
Followed post 4 instructions, but after Odin (which said PASS!), phone is now stuck on white boot screen with AT&T logo. Checked md5, everything checks out. What do you think went wrong?

camkatastrophe said:
Followed post 4 instructions, but after Odin (which said PASS!), phone is now stuck on white boot screen with AT&T logo. Checked md5, everything checks out. What do you think went wrong?
Click to expand...
Click to collapse
What was you running before, Lollipop? If you was, you need to do all four files not the All-In-One to change your boot loader back to NC2.

so much simpler
Thanks for making this simpler! If all goes well then you will be donated to good sir! now if you could just get someone on my at&t s5 active!

dwillimon said:
now if you could just get someone on my at&t s5 active!
Click to expand...
Click to collapse

I have a s5active and just love the hell out of it. I'm still kinda green with the rooting but have done several successful roots, but development is way out of my wheelhouse. Unfortunately I haven't found a developer that had been working on the active. I'm still looking though. Thanks for doing the outstanding organization you did for the note 3. I'm going to be doing it as soon as the laptop comes back from the shop. My wife will like fire cat I think. I just found the thread I needed for my active lol only one rim but better than nothing.

Hey all, I've been away since the Skyrocket days. For ODIN, what state does the phone need to be in. I have USB debugging Enabled, but the ODIN says Failed. I downloaded all 4 files. Nevermind, had to put the phone in download mode.

i used KingoRoot to "root" it said it was sucessful, but when i try SuperSU it said "SuperSu Binary needs to be updated. Continue"? when i click continue, i click on normal and it says "Installing, please wait" then it returns failed.. SuperSu binary is not updating what is the fix for this?

Kid27085 said:
i used KingoRoot to "root" it said it was sucessful, but when i try SuperSU it said "SuperSu Binary needs to be updated. Continue"? when i click continue, i click on normal and it says "Installing, please wait" then it returns failed.. SuperSu binary is not updating what is the fix for this?
Click to expand...
Click to collapse
I would install Root Checker https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en to see if your root is properly installed. You might have to use KingoRoot again. I usually stick with Towelroot.

i tried superuser and that said it might not have installed properly. I tried flashing the ODIN files again and now it says failed. I think i've bricked my phone and now im really frustrated

Kid27085 said:
i tried superuser and that said it might not have installed properly. I tried flashing the ODIN files again and now it says failed. I think i've bricked my phone and now im really frustrated
Click to expand...
Click to collapse
Can you get into download mode?

Rooted i747 said:
Can you get into download mode?
Click to expand...
Click to collapse
ok i have just gotten mad and constantly click on the start button in ODIN until it seemed to have worked. Well.. glad to say, my phone is up and running with 4.4.2 , rooted with TowelRoot, Installed SuperSu and installed BusyBox... now to find a cool rom to run it on. Thanks for all the help guys.

Rooted i747 said:
You can't root OC1, but you can use Odin to downgrade to NC2 and root it. Odin v.3.10.6 http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613. Once you Odin back you can use Towel root or Kingo root (links are posted above your post). Then install Supersu https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and run it, install Busybox https://play.google.com/store/apps/details?id=stericson.busybox&hl=en open and install it, then Safestrap http://forum.xda-developers.com/devdb/project/dl/?id=7216. (You should make a backup once Safestrap is installed before you flash any Roms). Once you're done you can pick a Rom for your Note 3 http://forum.xda-developers.com/note-3-att/development Now you ever use Odin? http://www.samsungodindownload.com/odin-tutorial/ (The site only shows flashing the All-In-One file so you know). Use all 4 Odin files, N900AUCUCNC2 ODIN Files, BL https://www.androidfilehost.com/?fid=96042739161891602 AP https://www.androidfilehost.com/?fid=96042739161891890 CP https://www.androidfilehost.com/?fid=96042739161891603 CSC https://www.androidfilehost.com/?fid=96042739161891604
Click to expand...
Click to collapse
Thanks for this.
My note 3 is on OC2 and running Android 5.0.
Does this instruction work for my phone?
Thanks

OJ7 root.

After reading dozens of threads I'm at a loss.
1. Can I root?
2. If I root, is my phone still going to work? Or will it become the latest victim of my Beowolf.

Odin twrp then install unikernel inside twrp. Will trip Knox so Samsung pay won't work anymore.

tyrone1 said:
Odin twrp then install unikernel inside twrp. Will trip Knox so Samsung pay won't work anymore.
Click to expand...
Click to collapse
Ok thanks. Not concerned with Sam pay. Citibank and Wells aren't supported.

It works with Citibank cards

stncldtex said:
After reading dozens of threads I'm at a loss.
1. Can I root?
2. If I root, is my phone still going to work? Or will it become the latest victim of my Beowolf.
Click to expand...
Click to collapse
I finally found a routine and the right files needed to successfully acquire root, twrp, and custom ROM. Although, the only custom ROM Iv'e been able to boot and setup with all T-Mobile services intact and even the finger print security feature working, is the "OZOP_EDGE_v11_DOJ7.zip, thanks to stangdriver44".
Just remember you should back up the EFS and backup the phone using Samsung smart switch. If you need help, pm me. Id lay out the exact steps I took to get root originally and what it took to get out of a bricked phone, and finally to root and install a custom ROM.
I will type up what I did later today or tomorrow and post it in case anyone does the same thing to gets bootloops and bricks.
I have to attend to other chores now before I go back to work tomorrow, since I spent every evening for the last week and all day and night yesterday, trying to bring this phone out of brick.
chevy383surfing

tyrone1 said:
It works with Citibank cards
Click to expand...
Click to collapse
Sorry Capital One not Citi.

stncldtex said:
After reading dozens of threads I'm at a loss.
1. Can I root?
2. If I root, is my phone still going to work? Or will it become the latest victim of my Beowolf.
Click to expand...
Click to collapse
chainfire's systemless root BETA v2.61 works flawlessly: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3

pm me.
Id like to know the steps you took to root your s6. pm me whenever possible. Thanks.
chevy383surfing said:
I finally found a routine and the right files needed to successfully acquire root, twrp, and custom ROM. Although, the only custom ROM Iv'e been able to boot and setup with all T-Mobile services intact and even the finger print security feature working, is the "OZOP_EDGE_v11_DOJ7.zip, thanks to stangdriver44".
Just remember you should back up the EFS and backup the phone using Samsung smart switch. If you need help, pm me. Id lay out the exact steps I took to get root originally and what it took to get out of a bricked phone, and finally to root and install a custom ROM.
I will type up what I did later today or tomorrow and post it in case anyone does the same thing to gets bootloops and bricks.
I have to attend to other chores now before I go back to work tomorrow, since I spent every evening for the last week and all day and night yesterday, trying to bring this phone out of brick.
chevy383surfing
Click to expand...
Click to collapse

andrey1186 said:
Id like to know the steps you took to root your s6. pm me whenever possible. Thanks.
Click to expand...
Click to collapse
I will get a write up of the steps. I'll pm you tomorrow afternoon. I planned to do it tonight, but I have a case of the Mondays!

muniz_ri said:
chainfire's systemless root BETA v2.61 works flawlessly: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Click to expand...
Click to collapse
How do you flash it?

stncldtex said:
How do you flash it?
Click to expand...
Click to collapse
Install twrp on stock oj7 then flash supersu v2.61 in twrp. that's it.

muniz_ri said:
chainfire's systemless root BETA v2.61 works flawlessly: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Click to expand...
Click to collapse
Does this trip KNOX?

chip.hughes said:
Does this trip KNOX?
Click to expand...
Click to collapse
of course

stncldtex said:
How do you flash it?
Click to expand...
Click to collapse
You'd have to setup Cygwin software to make the zip an 'Odin flashable .tar.md5 type file', which I have not had time to play with, in order to flash supersu zip files onto the samsung phones.
I am working on a worksheet right now explaining what I had to do to install 5.1.1 firmware and root the phone. I am still looking back to remember exactly how I unlocked the bootloader. I did have to use an android terminal to map out the twrp recovery manual on the phone itself. I do know it would wise for anyone interested in this to backup the EFS before anything. I had to download a specific windows DOS software that does it in a couple seconds and stores it on your computer. It works for a number of other phones as well. Also need to download the newest Odin 3.10.7 software in order to work with 5.1.1 firmware without any problems. Also need to do a backup of whole phone with samsung smart switch "takes place of Kies software now". When I get home tonight I will get names and locations of everything and inform everyone. If you download the wrong DOJ7 software or firmware you'll mess up your device. It took me a week to find the right software downloads related to 5.1.1 in order to make everything work right. And I did everything within 15 minutes. Once I figured out the routine.
Once you update to 5.1.1 I know of no way to downgrade.
I do recommend going over to serio22's post -[Firmware][Bootloader & Modems][Odin] - G920T - DOJ7-
And download DOJ7 BL and DOJ7 modem and G920TUVU3DOJ7 (firmware). Download Chainfire's latest beta super su.

You can just flash unikernel to get root.
Possibly any of the other kernels too

stncldtex said:
After reading dozens of threads I'm at a loss.
1. Can I root?
2. If I root, is my phone still going to work? Or will it become the latest victim of my Beowolf.
Click to expand...
Click to collapse
Yes you can root .. by flashing unikernel .. and phone will still be working ...

Tried flashing Uni through Odin with no luck. I get this in Odin.
Get PIT for mapping.
Write operation failed.
Any idea's?

stncldtex said:
Tried flashing Uni through Odin with no luck. I get this in Odin.
Get PIT for mapping.
Write operation failed.
Any idea's?
Click to expand...
Click to collapse
I recommend you root with the latest Supersu beta v2.62-3 zip. It will patch the stock kernel which was designed for your specific build unlike the unikernel. Just flash via twrp.

muniz_ri said:
I recommend you root with the latest Supersu beta v2.62-3 zip. It will patch the stock kernel which was designed for your specific build unlike the unikernel. Just flash via twrp.
Click to expand...
Click to collapse
TWRP gives off the same error.

stncldtex said:
TWRP gives off the same error.
Click to expand...
Click to collapse
More accurately trying to Odin TWRP.

Help rooting SM-G920A 7.0

I have been having a really hard time rooting my Galaxy S6 that was updated to 7.0. I keep finding a lot of stuff for the SM-G920F, but I don't want to screw up this phone by trying it. I have attempted to flash TWRP with Odin 3.12.10 which always results in Complete(write) operation failed. Everything I've read says I need to install that first. I have both Kies installed (for most up-to-date drivers) as well as separately downloaded drivers from Samsung's website.
Note: I have downloaded twrp-3.1.1-0-zeroflite.img.tar and checked it with its md5 file to make sure it was correct. I also have N920_Nougat_Root_SuperSU_No_kernel_included.zip but I haven't tried anything yet because I'm apparently not supposed to until I have TWRP installed.
I've rooted phones before, I've installed CFW before, and I've even developed some android apps before, but this is stumping me. Not sure what to do at this point.

Mallos31 said:
I have been having a really hard time rooting my Galaxy S6 that was updated to 7.0. I keep finding a lot of stuff for the SM-G920F, but I don't want to screw up this phone by trying it. I have attempted to flash TWRP with Odin 3.12.10 which always results in Complete(write) operation failed. Everything I've read says I need to install that first. I have both Kies installed (for most up-to-date drivers) as well as separately downloaded drivers from Samsung's website.
Note: I have downloaded twrp-3.1.1-0-zeroflite.img.tar and checked it with its md5 file to make sure it was correct. I also have N920_Nougat_Root_SuperSU_No_kernel_included.zip but I haven't tried anything yet because I'm apparently not supposed to until I have TWRP installed.
I've rooted phones before, I've installed CFW before, and I've even developed some android apps before, but this is stumping me. Not sure what to do at this point.
Click to expand...
Click to collapse
There is currently no known root method for g920a on 7.0. afaik attempting to downgrade to old enough firmware to attempt root will result in failure/brick.
This is the current state of root for this device.
https://forum.xda-developers.com/att-galaxy-s6/general/root-5-1-1-qa-oj7-root-snag-t3334546/page50

I appreciate the information! I guess it explains why nothing worked. Makes me feel better anyway.

Update to "Messed up badly with Xposed"

I rooted my SM-G530W Galaxy with Android 5.1.1 and it worked great until I tried to install Xposed.
Well after hours of work and gigabytes of files downloaded I'm still stuck.
Here is where I am at this point. I can't get the recovery screen, only the download screen so I can still flash CF-Auto-Root successfully but the phone just stops at the animated samsung screen after reboot again.
dr.fone won't even detect the device but ODIN and Kies3 do.
Uninstalled KIES3 to avoid possible conflicts with ODIN
I downloaded sdk tools for Windows but can't figure it out.
Lastly I downloaded a factory ROM and I've tried to flash it with ODIN which fails every time. ODIN checks the MD5 file and says it's ok but seems to fail after "NAND write start". Seems weird that CF-Auto-Root still works but the factory ROM won't but I really don't know much about that.
So ANY help will be much appreciated folks. Thank you very much, Wally.

WallusW said:
I rooted my SM-G530W Galaxy with Android 5.1.1 and it worked great until I tried to install Xposed...
Click to expand...
Click to collapse
I don't have this device but, one of the following threads may be helpful for what you are looking for and, if needed, post your question within one of them.
https://forum.xda-developers.com/showthread.php?t=3302883
https://forum.xda-developers.com/showthread.php?t=3530403
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Thanks but I was just messing around with ADB and I get an "unauthorized" message from the devices command so I think it may be boot locked.
Just something else to work on. Any Ideas ?
Thanks again