Hi , i have the gWatchr but now mi Screen is broken and i cant find a new Screen Part to repair my watch.
MAybe someone can say me where i can buy a new Screen to repair mit watch pls.
I've haven't seen any replacement screens. Your best bet is to look for another broken watch with a good screen and switch it out. You can probably find a broken GWR on ebay.
How the **** did you broke it ?
Related
Hey guys, I have just broken my diamond and I'm looking for a doner to repair mine.. My screen glass is cracked..
My screen works and the colours are not spreading..
My touch works and I can still use the device..
So I'm guessing there is glass between the digitizer and the actual display.
Would is be easier to repair it with parts from a doner phone or...
purchase this: http://cgi.ebay.co.uk/FULL-LCD-Scre...K_Replacement_Parts_Tools&hash=item3363b4604e
And replace the whole screen assembly. That includes the full front as you see in the eBay picture...
You're right. There's a glass between digitizer and display... But they are all glued... it's a difficult work to reassemble everything...
Yeah I thought so...
The reason I posted this was to see if anyone had an old broken bricked diamond I could useas a doner for the whole screen..
Sent using RapidRead!
I tried the same but resulted in completely disaasebling the LCD. And was of no use later. I had to buy a new one. Better get a new on instead.
Yeah, I most likely will
I just asked here to see if I could get one a little cheaper, but then paying around £20-£25 for a brand new screen etc, which includes the screen, digitizer, glass etc...
What you see in the eBay pic is what I would be removing from a doner phone.
But also if I bought a new one from ebay that would then get rid of any scratches etc.
Although I've always had a protector on it from day one, it was bought second hand so there are some minute scratches
I drop my SP and front glass cracked, it really looks ugly. But display and touch are functioning normally. So, my problem is how to replace it. I saw screen digitizers on ebay can be bought for 25-50 USD, but I read somewhere that it's not possible to replace only digitizer but you need to replace the screen as well. Another problem is, I saw a video on yt where a man bought faulty digitizer for sp on ebay.... So, I don't know what to do?
abdic88 said:
I drop my SP and front glass cracked, it really looks ugly. But display and touch are functioning normally. So, my problem is how to replace it. I saw screen digitizers on ebay can be bought for 25-50 USD, but I read somewhere that it's not possible to replace only digitizer but you need to replace the screen as well. Another problem is, I saw a video on yt where a man bought faulty digitizer for sp on ebay.... So, I don't know what to do?
Click to expand...
Click to collapse
send it for repairs to sony centre
Not many options really.
1) Send your phone to somewhere where they can repair it for a cost.
Or
2) Buy one off ebay and give it a go yourself! If its faulty send it back.
I replaced screen on xperia arc. If you take your time and be patient its not hard. Not sure what answers you're looking for ha
As far as I was aware, for the arc, you had to replace screen and digitizer as one assembly.
The digitizer is kind of stuck to the screen, i.e. you cant do it yourself...easily.
hey guys
so last week something unbelievable happened to me and i say unbelievable because no one will believe what happened but thats it what can i do about it xD OK so last week my G Watch fell from my hand while wearing it and it fell off on my Xperia Z from about 20 centimeters and i didn't care that exact moment because i said like WTF it wont harm the device and after 2 minutes i opened my phone aaand its just not working the screen was broken from the area on the left of the microphone and the phone wont work but from a special small area anyways i went to my local Sony agent and he told me that the digitizer cant be replaced alone and that they will be replacing the whole LCD Display so i went to some other 3rd party repair-shops and they said the same thing and they will be replacing it with a non-original Display that cost 1/5 the price of the one that the Sony Agent offered me ( Sony Agent told me that it costs 170 Jordanian Dinars which equals 240 USD and the phone itself new unlocked costs pretty much less than that in my country ( Jordan ) )
Anyways i was wondering guys if i can replace the digitizer alone by myself (by ordering it from eBay or so and disassembling the phone and replacing it at home ) or should i replace the whole LCD Display ?
(Sorry if i had any English mistakes but i"m not a native English tongue )
Best Regards,,,
I had broken touch screen and i watched video on YouTube how to repair just touch screen, ordered just touch screen from Ali and I broke the digitalizer so i ordered whole screen with mask after. My point is, if you don't have tools and skills (or is you first time) buy whole (touch screen + digitalizer) and replace them.
Good Luck!
Sent from my XPERIA M2 using Tapatalk
Dzepar said:
I had broken touch screen and i watched video on YouTube how to repair just touch screen, ordered just touch screen from Ali and I broke the digitalizer so i ordered whole screen with mask after. My point is, if you don't have tools and skills (or is you first time) buy whole (touch screen + digitalizer) and replace them.
Good Luck!
Sent from my XPERIA M2 using Tapatalk
Click to expand...
Click to collapse
thanks bro :good:
Digitizer and touch screen are glued together making it impossible to remove the touch screen without breaking the digitizer that is made of thin glass.
I replaced the combo on my first Z after my car key fell off from above 15cm or so onto the screen, same story as yours! (X_X)
But:
1/ Besides the combo touch + digitizer piece you also have to buy the sticker as the actual glue around the frame will get destroyed while removing the screen.
2/ If your phone is old, you might want to buy an original battery to replace your existing battery.
3/ While reassembling the battery in the phone make sure it does not stick out from the plane surface otherwise it will push on the glue and reopen your phone. Mine had a piece of plastic on its side with harpoon like features; it looked like it had been forced into place with harpoons retaining it: crappy design, to my opinion.
Some 3M strong and thin double side tape might also be useful to keep the battery into place especially if you keep the original one which might unfortunately get a little bent while un-glueing it from the case...
In any case, you should consider its waterproof feature gone!
Good luck!
MRDK_XZ said:
hey guys
so last week something unbelievable happened to me and i say unbelievable because no one will believe what happened but thats it what can i do about it xD OK so last week my G Watch fell from my hand while wearing it and it fell off on my Xperia Z from about 20 centimeters and i didn't care that exact moment because i said like WTF it wont harm the device and after 2 minutes i opened my phone aaand its just not working the screen was broken from the area on the left of the microphone and the phone wont work but from a special small area anyways i went to my local Sony agent and he told me that the digitizer cant be replaced alone and that they will be replacing the whole LCD Display so i went to some other 3rd party repair-shops and they said the same thing and they will be replacing it with a non-original Display that cost 1/5 the price of the one that the Sony Agent offered me ( Sony Agent told me that it costs 170 Jordanian Dinars which equals 240 USD and the phone itself new unlocked costs pretty much less than that in my country ( Jordan ) )
Anyways i was wondering guys if i can replace the digitizer alone by myself (by ordering it from eBay or so and disassembling the phone and replacing it at home ) or should i replace the whole LCD Display ?
(Sorry if i had any English mistakes but i"m not a native English tongue )
Best Regards,,,
Click to expand...
Click to collapse
Just dont go for non orignal diplay you will regret it, most probably they will order a whole new CHEAP QUALITY front panel from ebay which will have poor quality of screen and all the ports. Also the power button will become a bit hard to press.
I did the same mistake and gave my phone to a local phone repair shop which was cheap but my phone went dead the very next day after it came back from repair. I agree Sony Service Centre will charge more but your phone will be in best possible condition.
My suggestion go to Sony people for repair.....
Hope it helps you
Thank you guys very much i really appreciate your help and i think i'm going to the Sony agent because i dont have that much of experience to disassemble the phone and i might get it even worst instead of fixing it :\
again thank you really much guys
Just pay attention to pay a fake screen no original one there's a few different things between the original one
Hello,
The screen of my Xperia z3c broke today. Is there a way to repair it? Should i buy a new smartphone? Is it possible to fix it by myself?
Thank you in advance
Yeah there is a way,it isn't hard but again it ain't easy
You can have look at some z3c screen replacement videos at YouTube and decide if you're up for it yourself. You could also pay someone else to do it or buy a new phone. If you decide to give it a go yourself I'd recommend getting an original, or good copy, screen replacement. For a z3c I would not get any of the screens with a pink piece of protection plastic on the back of it.
Hello guys,
Im new here, but i know thing or two about phones.
So lets get started, i have a problem. I tried to replace my cracked P10 lcd, so i tear down my phone
piece it out, put in new lcd with frame, watched guide while doing it.
Put it back together and tried to turn it on.
All i get is blank screen with back light, it has sound, it has vibration but no picture...
Can You help me please....
koledkostic said:
Hello guys,
Im new here, but i know thing or two about phones.
So lets get started, i have a problem. I tried to replace my cracked P10 lcd, so i tear down my phone
piece it out, put in new lcd with frame, watched guide while doing it.
Put it back together and tried to turn it on.
All i get is blank screen with back light, it has sound, it has vibration but no picture...
Can You help me please....
Click to expand...
Click to collapse
try to replace with your old lcd broken: it happens to me with an iphone 6, lcd replaced and black screen. The replacement was broken!! if also the old broken lcd is not working (hoping that only glass is broke and not all screen), contact the seller and apply for a refund
eLar19 said:
try to replace with your old lcd broken: it happens to me with an iphone 6, lcd replaced and black screen. The replacement was broken!! if also the old broken lcd is not working (hoping that only glass is broke and not all screen), contact the seller and apply for a refund
Click to expand...
Click to collapse
Old screen got broken in procces of removing small pieces that the new one didnt come with...and im in contact with the seller, trying to get new one or a refund...
Hello my friend.
If there's a Huawei service center, give your phone to them.
They're best at replacement.
Erfan_rv said:
Hello my friend.
If there's a Huawei service center, give your phone to them.
They're best at replacement.
Click to expand...
Click to collapse
there is not, and they would be quite expensive....
koledkostic said:
there is not, and they would be quite expensive....
Click to expand...
Click to collapse
Well did u get another LCD or refund?