Related
Hey guys. I've had a Raider on Rogers for quite some time, and the Dark Raider rom with KozmikKernel RC1 has been working well for me for what I need. However, the Wi-Fi hotspot hasn't been working for me no matter how many different third-party tethering programs I installed. I'm on the AT&T build.prop. Is there any way I can fix this problem on my current setup, or should I just switch over to stock Rogers ICS and go back to a custom ROM later?
I've also attached a screenshot of what happens on the default hotspot app (My phone crashed while trying to take the screenshot.... weird )
Try the beta 12 from kozmick , or faux 123 (007 kernel) see if that works for ya.
Bigtjmc said:
Try the beta 12 from kozmick , or faux 123 (007 kernel) see if that works for ya.
Click to expand...
Click to collapse
I just installed beta 13 and it didn't work. Also, my phone's performance is now choppier, probably because of the badass governor.
i hope i helped.
i have had the same issue before, and after a lot of reading and searching, i came to figure out what i was doing wrong.
you should keep reading and searching too, you will learn a lot.
but i will tell you what i know and i hope it helps.. it all has to do with the way you flash roms and kernells to your device. if you have already achieved S-off, then your problem may be a lil more difficult,, but if you are just fastboot unlock and rooted.. what you need to do is stract the boot.img of the file that has the kernell inside the rom zip. and flash that separately via fastboot.
place the boot on ur file that ur using to flash stuff, and then use the proper command,
"fastboot flash boot boot.img" in command pront,
if u are confuse, take a look into this guide. http://forum.xda-developers.com/showthread.php?t=1416836
:good:
I've tried 3 different kernels, still getting the same error message as above on DarkRaider. I'm not with AT&T. Any advice?
Reflash the Rom and when its done flash the kernel should fix it
Bigtjmc said:
Reflash the Rom and when its done flash the kernel should fix it
Click to expand...
Click to collapse
Tried that with several ROMs and several kernels - still get the same error. Thought I had it fixed with that world-famous Illuminati ROM, but alas it was not to be.
It has to be an APN problem, in that it's looking for AT&T info and not finding it. That's all I can think of it being...
gfinockio said:
Tried that with several ROMs and several kernels - still get the same error. Thought I had it fixed with that world-famous Illuminati ROM, but alas it was not to be.
It has to be an APN problem, in that it's looking for AT&T info and not finding it. That's all I can think of it being...
Click to expand...
Click to collapse
Only one I ever got the hotspot to work is dark raider buy just clicking on it , only didn't work one time and I reflashed it and the kernel and it worked again I never had to add any thing just click on the hotspot icon .
Bigtjmc said:
Only one I ever got the hotspot to work is dark raider buy just clicking on it , only didn't work one time and I reflashed it and the kernel and it worked again I never had to add any thing just click on the hotspot icon .
Click to expand...
Click to collapse
Are you with AT&T though?
gfinockio said:
Are you with AT&T though?
Click to expand...
Click to collapse
Yea att,
that is what mine looks like , at the top right you can see the active symbol.
On a stock ROM, that's exactly what I see. It works on stock but any modded ROM gives me an error. It works on AT&T, but not on any other carrier. That's what I'm trying to figure out.
Spalla said:
Hey guys. I've had a Raider on Rogers for quite some time, and the Dark Raider rom with KozmikKernel RC1 has been working well for me for what I need. However, the Wi-Fi hotspot hasn't been working for me no matter how many different third-party tethering programs I installed. I'm on the AT&T build.prop. Is there any way I can fix this problem on my current setup, or should I just switch over to stock Rogers ICS and go back to a custom ROM later?
I've also attached a screenshot of what happens on the default hotspot app (My phone crashed while trying to take the screenshot.... weird )
Click to expand...
Click to collapse
Actually I'm using this on my HTC Vivid for tethering!! I did this that a saw on a Vivid ROM thread, I think it was on Dark Raider's..... so I don't deserve any credit, I just want to help. I'm rooted and tried it and it works perfectly!! You can just hit the thank you button.
You'll need SQ Lite Editor:
1) Dialer Storage
2) telephony.db
3) carriers
4) 12 Entitlement 310410
you shoud change the value under "apn" from "broadband" to "pta"
5) Please restart your device and you will get it!!
HTC One
Sprint
HBOOT 1.55
S [ON]
OS 3.04.651.2
Problem: Friend thought it would be cool to put Android Revolution HD on my HTC One since he did it on his and wanted to surprise me with it...
Long story short he did, and now I have a soft bricked device. I've tried pushing a stock and a custom ROM through ADB sideload and I end up with a phone that acts like it is going to work, gets to the lock screen and freezes. It has no service but that's irrelevant because I can't even get past the lock screen. I can however use my volume key to raise and lower volume.
Can anyone get me past this or am I screwed till a new RUU comes out/way to get S [OFF] after hitting 1.55?
You can try this I'm not sure if it will work but it's worth a try
http://forum.xda-developers.com/showthread.php?t=2470569
bigdaddy619 said:
You can try this I'm not sure if it will work but it's worth a try
http://forum.xda-developers.com/showthread.php?t=2470569
Click to expand...
Click to collapse
Thanks so much for the reply, I'll give it a shot. I'm desperate right now willing to try anything.
Also forgot to mention the boot animation does fine, the phone acts like it's going to work fine then it just plain freezes where it would normally give you the "sign into google account" and name your phone. So I'm not sure what's missing if anything, if anyone has solved this and is willing to help I would greatly appreciate it.
Your partitions are messed up because he flashed a GSM rom on your CDMA device
bigdaddy619 said:
Your partitions are messed up because he flashed a GSM rom on your CDMA device
Click to expand...
Click to collapse
Yeah, exactly. Is there any way I can go about fixing that? I'm checking out that guys thread, and it sounds promising... but I can't figure out how to get my drive to sync with my PC to transfer it to TWRP to install it. I'm going to try to ADB it but I doubt that will work. Starting to lose hope at the moment lol but trying to stay optimistic.
Asosaki said:
Yeah, exactly. Is there any way I can go about fixing that? I'm checking out that guys thread, and it sounds promising... but I can't figure out how to get my drive to sync with my PC to transfer it to TWRP to install it. I'm going to try to ADB it but I doubt that will work. Starting to lose hope at the moment lol but trying to stay optimistic.
Click to expand...
Click to collapse
Only way to fix the partitions is to run an RUU which we don't have.
Is your phone seen by your PC when it's plugged in and booted to the rom? I know it doesn't boot correctly but maybe you can move the file to your phone.
You could also try adb push nameoffile.zip /sdcard/ most likely won't work because of the partitions
Format with TWRP first to get partitions clean, then adb push Rom/sideload
Sent from my HTCONE using XDA Premium 4 mobile app
I'm pretty sure the radio partition get overwritten as well so I would say format sd in twrp, flash a radio in fastboot then sideload your Rom and flash it
Sent from my HTCONE using XDA Premium 4 mobile app
18th.abn said:
I'm pretty sure the radio partition get overwritten as well so I would say format sd in twrp, flash a radio in fastboot then sideload your Rom and flash it
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for the replies guys, going to try that now. It feels like entire ROM would work fine and there was just "something missing" from my phone. It may very well be a radio. I know something got wiped that shouldn't have because I had to do partition reset due to... well I'm sure you know. Also had to side load TWRP. Learning experience for me, not frustrated at least I'm getting knowledge to help others with it if I can solve it on my own.
Okay so, reporting back that FIXED my no service issue, and it's bringing up updates in the notification bar, only problem is I can't use the touch interface. I don't think my phone is broken, I think it just lacks everything that makes it a smartphone.
Anyone have an idea as to what I can flash to get it back up and running? It feels like it's missing touch interface, and whatever is needed to initiate the "factory" setup screens. Shouldn't the ROM include all of that? I put Viper ROM 1 on there. Progress was made, but it's missing something lol.
The radio also stopped it from resetting and turning itself off after 30 seconds like it was doing previously. Is there a flash-able touch interface I can throw on it? Heh...
Also noticed after it was plugged in for a couple of minutes it's detected by my PC now so I don't need to side-load anymore. Not that it was hard to, just a step forward I think. Just need to figure out what's missing from the boot screen and what I need to put on it to be able to use the touch screen. Any ideas?
Asosaki said:
Okay so, reporting back that FIXED my no service issue, and it's bringing up updates in the notification bar, only problem is I can't use the touch interface. I don't think my phone is broken, I think it just lacks everything that makes it a smartphone.
Anyone have an idea as to what I can flash to get it back up and running? It feels like it's missing touch interface, and whatever is needed to initiate the "factory" setup screens. Shouldn't the ROM include all of that? I put Viper ROM 1 on there. Progress was made, but it's missing something lol.
The radio also stopped it from resetting and turning itself off after 30 seconds like it was doing previously. Is there a flash-able touch interface I can throw on it? Heh...
Also noticed after it was plugged in for a couple of minutes it's detected by my PC now so I don't need to side-load anymore. Not that it was hard to, just a step forward I think. Just need to figure out what's missing from the boot screen and what I need to put on it to be able to use the touch screen. Any ideas?
Click to expand...
Click to collapse
Looks like you just need to flash a 4.3 rom
bigdaddy619 said:
Looks like you just need to flash a 4.3 rom
Click to expand...
Click to collapse
Really? That's the only problem you think? I'mma try that out I'll give you a message as soon as I do. Thanks again.
Also, is there any way I can get a MOD or someone to un-lock my account? This 5 minute wait is for the birds lol I got hardware on the line here :angel: Need all the posts/help I can get hahaha.
bigdaddy619 said:
Looks like you just need to flash a 4.3 rom
Click to expand...
Click to collapse
You are the MAN my phone's fixed now. BoO YaH. Now I can go beat my buddy up with peace of mind knowing my phone is in good working order.
Now running Stock with goodies, guess the other custom ROMs I put on it were just lacking 4.3 stability. You rock broski.
Asosaki said:
guess the other custom ROMs I put on it were just lacking 4.3 stability.
Click to expand...
Click to collapse
New firmware had updated touch drivers. That's why your touch screen wasn't working right.
bigdaddy619 said:
You can try this I'm not sure if it will work but it's worth a try
http://forum.xda-developers.com/showthread.php?t=2470569
Click to expand...
Click to collapse
Your the man bigdaddy, good to know there is a glimmer of hope for those with 4.3 and s-on.
Sent from my HTCONE using xda app-developers app
Since you're on the newest firmware you can only flash 4.3 sprint roms..the touchscreen firmware has been updated. You can't downgrade or s-off because you're on hboot 1.55. Just sideload a 4.3 Rom and you'll be up and running fine
Sent from my HTCONE using XDA Premium 4 mobile app
So I decided to change my boot animation on my d959 with T-Mobile latest update. I've done it before and never had a problem but this time when I boot up it starts the animation and then just freezes there. Since I'm on D95920m and T-Mobile decided to get rid of download mode I'm not sure this one is coming back.
I have tried everything on XDA I could find but without download or recovery o don't think there is much that can be done for it. Does anyone have a suggestion or am I stuck rebooting hoping it will get past that point just once.
http://forum.xda-developers.com/showthread.php?p=53728658
Im not positive on this but I think if you change the setting on the top left to" emergency " you don't have to be in download mode. This has worked great both times I've used it.
mattwheat said:
http://forum.xda-developers.com/showthread.php?p=53728658
Im not positive on this but I think if you change the setting on the top left to" emergency " you don't have to be in download mode. This has worked great both times I've used it.
Click to expand...
Click to collapse
Thank you for the suggestion but it didn't work.
I downloaded and tried bot kdz from http://forum.xda-developers.com/showthread.php?t=2644083
It made it further but errors out. I have attached a couple screen shots as to how far it goes. I'm thinking the computer is suppose to tell the phone to go into download mode, which is not there thanks to T-Mobile, or emergency what ever that is.
And what so odd is the g3 comes boot loader unlocked.
It's like the devs for the flex struggled to get the OS to boot then during extensive testing it booted and they said "Hold the f up don't do anything else. It booted. Box it up and ship it out before the GS5 hits the market"
Yes, it seemed a little rushed. Lucky my wife loves me and didn't kick my butt to hard about it. Ended up getting a Nexus 5 and to be honest I like it more. Always liked stock Android and everything just works. Would have liked to have had a bigger screen so I may join jump and get the Nexus 6 when it comes out. Thanks again for your help.
Have u tried looking at the device manager and changing the phone to just adb had same issue and changed driver to adb instead and was able to flash back to stock am now running my own version of stock modified with g3 apps
This is what my phone looks like now
And what i mean is change the drivers under device manager to adb drivers for the phone and u should be able to flash stock back to the phone
allenjthomsen said:
This is what my phone looks like now
Click to expand...
Click to collapse
Wow that's amazing you even ported dialer and other system apps? My ROM on the note 2 had ms ported and it took weeks to get everything working. What all did you have to modify? Do you plan to release it that was a lot of work to not share especially as busy at work as you've been.
Also, you need to get with playfulgod seeing how you also ported the g2 modem to your flex based on that baseband.... or possibly you just changed your build.prop to show like you have a flex. Do you think we are idiots?
Like maybe you're running this ROM and taking claiming you made your own?
http://forum.xda-developers.com/showthread.php?t=2783192
kintwofan said:
Wow that's amazing you even ported dialer and other system apps? My ROM on the note 2 had ms ported and it took weeks to get everything working. What all did you have to modify? Do you plan to release it that was a lot of work to not share especially as busy at work as you've been.
Also, you need to get with playfulgod seeing how you also ported the g2 modem to your flex based on that baseband.... or possibly you just changed your build.prop to show like you have a flex. Do you think we are idiots?
Like maybe you're running this ROM and taking claiming you made your own?
http://forum.xda-developers.com/showthread.php?t=2783192
Click to expand...
Click to collapse
Nope no lies here i have a g flex
And i didnt port the apps i got them from the optimus l3 ii themes and apps thread go check
They just work on the flex i did send a messege to @ cloudyfa about making a kdz of cloudyg3 but havent heard back
I used all apps from this thread on my flex a few didnt work but it took me 10 minutes to figure out which ones did and didnt
kintwofan said:
Wow that's amazing you even ported dialer and other system apps? My ROM on the note 2 had ms ported and it took weeks to get everything working. What all did you have to modify? Do you plan to release it that was a lot of work to not share especially as busy at work as you've been.
Also, you need to get with playfulgod seeing how you also ported the g2 modem to your flex based on that baseband.... or possibly you just changed your build.prop to show like you have a flex. Do you think we are idiots?
Like maybe you're running this ROM and taking claiming you made your own?
http://forum.xda-developers.com/showthread.php?t=2783192
Click to expand...
Click to collapse
And also kintwofan u should know if i had the time i wouldve made a rom like i did for the s4 and note 3
I remember you i dont forget names
The hard apps port the apps port and the system ui are the ones im using from the threads in picture
Sorry @hatdrc didnt mean to jack up thread
allenjthomsen said:
Have u tried looking at the device manager and changing the phone to just adb had same issue and changed driver to adb instead and was able to flash back to stock am now running my own version of stock modified with g3 apps
Click to expand...
Click to collapse
How would I change the phone to adb? You talking about the drivers in device manager?
Yes thats what im talking about i did that and brought mine back
Here's a way to get totally back to stock on the VS980 39a build. This will completely restore all your bootstack partitions and stock recovery. Only thing not stock is its rooted to be able to make this.
WARNING: YOU WILL LOOSE TWRP RECOVERY AFTER THIS!
Full wipe and flash from recovery!
Download:
https://mega.co.nz/#!sQMgGBoI!KVK3OTnVOqmZvx3lbxY_n5_Ek8VFughYWQJNvKBgqz8
MD5: f11da3bbb1faa8b50fa2d0f67d74d4fa
It seems that the number of new threads being created with similar or the same exact content is getting out of hand lately. I have no interest in pure-stock firmware and only posted one after you requested that I do so, so if it's important to you, let me know and I'd be happy to close it to reduce clutter/confusion.
xdabbeb said:
It seems that the number of new threads being created with similar or the same exact content is getting out of hand lately. I have no interest in pure-stock firmware and only posted one after you requested that I do so, so if it's important to you, let me know and I'd be happy to close it to reduce clutter/confusion.
Click to expand...
Click to collapse
Its up to you but only yours has the full stock flashable rom. I think if people always read the OP's, then there won't be problems. Seems people don't take the time to read OP anymore but just jump in and ask, "How do I flash this". I usually now just ignore those post especially if the info is in the OP. Personally, I think all the threads serve their own purpose and each one is for different things.
MicroMod777 said:
Its up to you but only yours has the full stock flashable rom. I think if people always read the OP's, then there won't be problems. Seems people don't take the time to read OP anymore but just jump in and ask, "How do I flash this". I usually now just ignore those post especially if the info is in the OP. Personally, I think all the threads serve their own purpose and each one is for different things.
Click to expand...
Click to collapse
Point made...I'll leave it to die on its own then.
MicroMod777 said:
Its up to you but only yours has the full stock flashable rom. I think if people always read the OP's, then there won't be problems. Seems people don't take the time to read OP anymore but just jump in and ask, "How do I flash this". I usually now just ignore those post especially if the info is in the OP. Personally, I think all the threads serve their own purpose and each one is for different things.
Click to expand...
Click to collapse
xdabbeb said:
Point made...I'll leave it to die on its own then.
Click to expand...
Click to collapse
Off Topic, but just want to thank you both and JPC for all the great DEV work y'all have done for all us G2 Verizon Users.
gorm said:
Off Topic, but just want to thank you both and JPC for all the great DEV work y'all have done for all us G2 Verizon Users.
Click to expand...
Click to collapse
Thanks. The G2 was one of those hidden jewels when it first came out. I'd like to upgrade but don't see anything really worthy at an affordable price. Though I almost jumped ship for a CPO G3 for $160 + 8 bucks a month w/tmo.
MicroMod777 said:
Thanks. The G2 was one of those hidden jewels when it first came out. I'd like to upgrade but don't see anything really worthy at an affordable price. Though I almost jumped ship for a CPO G3 for $160 + 8 bucks a month w/tmo.
Click to expand...
Click to collapse
Nexus 6 looks promising now that Verizon has it, Im gonna wait to make sure Verizon doesnt screw it up and lock it down.
ok I have a question here. after doing some readin about all the diferent stock 39A 's available I download this one but wanted o try it oly because it's the newest thing for our beloved G2 but also because there is a thread that says freedom tool for root and twrp recovery for 39A anyhow it installed great, running great except GPS random issues, well then I downloaded the the tool tis I already rooted so all I needed was the recovery hover is says turn on shared internet through usb tethering this is ot an option on 39A when is a subscription service and shuts back off is there really a recovery for 39A? and also I have use the flash tool a few times in the pas and it is set up on my laptop and I tested download mode today and it works. can I go back to the original 4.0 that came ith my phone when I first bough it ? I really use my tethering and cat use it without twrp. thanks fo the help guys!
quinejh said:
ok I have a question here. after doing some readin about all the diferent stock 39A 's available I download this one but wanted o try it oly because it's the newest thing for our beloved G2 but also because there is a thread that says freedom tool for root and twrp recovery for 39A anyhow it installed great, running great except GPS random issues, well then I downloaded the the tool tis I already rooted so all I needed was the recovery hover is says turn on shared internet through usb tethering this is ot an option on 39A when is a subscription service and shuts back off is there really a recovery for 39A? and also I have use the flash tool a few times in the pas and it is set up on my laptop and I tested download mode today and it works. can I go back to the original 4.0 that came ith my phone when I first bough it ? I really use my tethering and cat use it without twrp. thanks fo the help guys!
Click to expand...
Click to collapse
KDZ can restore you back to unrooted stock so you can always go back to stock if you can get into download mode.
There is TWRP 2.8.5.1 BUMPED recovery for 39A.
XDABBEB has a zip for 39A tethering modding "hotspot" apk
HueyT said:
KDZ can restore you back to unrooted stock so you can always go back to stock if you can get into download mode.
There is TWRP 2.8.5.1 BUMPED recovery for 39A.
XDABBEB has a zip for 39A tethering modding "hotspot" apk
Click to expand...
Click to collapse
that is the recovery I was supposed to be installing with the freedom tool but the phone wouldn't allow the tethering, I hve tired to find another recovery but couldn't find it I have read there are 2 methods the freedom tool or the other but no info on where it is . also Ihave the hotspot hack but cant flash t due to no recovery. thanks for the info. also would u happened to know where the info on the bumped recover is?
quinejh said:
that is the recovery I was supposed to be installing with the freedom tool but the phone wouldn't allow the tethering, I hve tired to find another recovery but couldn't find it I have read there are 2 methods the freedom tool or the other but no info on where it is . also Ihave the hotspot hack but cant flash t due to no recovery. thanks for the info. also would u happened to know where the info on the bumped recover is?
Click to expand...
Click to collapse
http://forum.xda-developers.com/verizon-g2/development/tool-freedom-tool-vs980-39a-twrp-t3053134
https://www.androidfilehost.com/?fid=95916177934540692 XDABBEB's hotspot tethering hack
that's the tool I have been trying to use, however it says to allow internet connection ethernet but the phone says this is a subscription service and I did not pay for it and wont turn on.
quinejh said:
that's the tool I have been trying to use, however it says to allow internet connection ethernet but the phone says this is a subscription service and I did not pay for it and wont turn on.
Click to expand...
Click to collapse
39A no longer has the internet connection. Make sure in Developer Settings you have USB Debugging checked, and use MTP mode. That will activate Debugging mode.
quinejh said:
that's the tool I have been trying to use, however it says to allow internet connection ethernet but the phone says this is a subscription service and I did not pay for it and wont turn on.
Click to expand...
Click to collapse
Its on you notification usb dropdown.
MicroMod777 said:
Its on you notification usb dropdown.
Click to expand...
Click to collapse
still no go. usb debugging checked and usb connection MTP connected but still not working!tried about everything I can think of
quinejh said:
still no go. usb debugging checked and usb connection MTP connected but still not working!tried about everything I can think of
Click to expand...
Click to collapse
Are u on 39a?
MicroMod777 said:
Are u on 39a?
Click to expand...
Click to collapse
yes
quinejh said:
yes
Click to expand...
Click to collapse
They changed it on LP 39A. Though u were on 27a.
Camera (ptp) puts i on usb debugging.
That was it! Got it installed now!! Thank you very much!!
quinejh said:
That was it! Got it installed now!! Thank you very much!!
Click to expand...
Click to collapse
That's weird that MTP didn't activate usb debugging. It works for me every single time.
Introduction
Hello! It's time for some fresh blood to get a chance to have some fun. Continue reading if you care about my semi-personal details. If not, then skip down below. I'm r3pwn, a 16 year-old developer and I enjoy messing around with technology in my free time (That's about as personal as it's going to get).
If you have any questions related to this rom, don't hesitate to ask either in this thread or via PM.
Disclaimer
CyanogenMod members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Click to expand...
Click to collapse
Known Issues
- Turning WiFi off causes a reboot
- Activating Airplane Mode causes a reboot
- It seems that cellular data is not working
- Camera is not working
- When WiFi is on, the phone randomly reboots (seems to be a Cricket thing)
Well, what DOES work, then?
- FM Radio
- WiFi (please note the issues listed above)
- Bluetooth
- Calling/Texting
Screenshots
I attached a handful of screenshots, which you can see at the bottom of this post.
Downloads
ROM: cm-12.1-20150813-UNOFFICIAL-a11.zip
MD5: 7c075b6fb8da3c96bcb38bb866c489d4
Older/Previous Releases
Please note that the file above does not include Google apps, such as Gmail, YouTube, or the Google Play Store. You will have to install those manually, just make sure they are compatible with Android 5.1.
Sweet! How do I install it?
Well, that depends on one thing. Are you S-OFF or S-ON?
If you don't know what this means, then you're S-ON.
If you're S-ON
1. Download the ROM zip to your computer.
2. Extract the "boot.img" from the zip file.
3. Put the zip file on your device and flash it in TWRP.
4. Reboot the device to fastboot mode and, on your computer, flash the boot image you extracted to your device by issuing the command "fastboot flash boot boot.img"
5. Reboot normally
If you're S-OFF
1. Place the zip on your device and flash in TWRP
2. Reboot normally
Changelog
- 8/13/15
--- Fixed an issue that caused CDMA users not to be able to place calls or send/receive text messages
XDA:DevDB Information
CyanogenMod 12.1 for the HTC Desire 510, ROM for the HTC Desire 510
Contributors
r3pwn, rbheromax
Source Code: https://github.com/r3pwn
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: None
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2015-08-12
Last Updated 2015-08-12
Yes! Downloading now. Thanks r3pwn... Your the man!
NfamousDroid said:
Yes! Downloading now. Thanks r3pwn... Your the man!
Click to expand...
Click to collapse
No problem.
I added another disclaimer to the OP, basically saying that it's not quite daily-driver material yet, just in case anyone decided to skip over the issues list.
Gapps package
r3pwn said:
No problem.
I added another disclaimer to the OP, basically saying that it's not quite daily-driver material yet, just in case anyone decided to skip over the issues list.
Click to expand...
Click to collapse
is the Lollipop Base Gapps package 5.1.1: gapps-511-base-20150807-1-signed.zip the right one to use with CyanogenMod 12.1 for the HTC Desire 510 ??
MAME Arcade said:
Click to expand...
Click to collapse
Please make sure that the MD5 of the zip you have is the same as the MD5 that I have posted in the OP. What is the error exactly?
Going to try this out later tonight when I get back home from work. Looking forward to seeing this progress.
never mind i forgot to factory reset.
BizarreMan said:
Going to try this out later tonight when I get back home from work. Looking forward to seeing this progress.
Click to expand...
Click to collapse
but now i have another problem, whenever wifi is turned on (cricket model) it will freeze thewn reboot a a fewv seconds later.
---------- Post added at 03:02 PM ---------- Previous post was at 02:51 PM ----------
r3pwn said:
Please make sure that the MD5 of the zip you have is the same as the MD5 that I have posted in the OP. What is the error exactly?
Click to expand...
Click to collapse
but now i have another problem, whenever wifi is turned on (cricket model) it will freeze thewn reboot a a fewv seconds later.
Appreciate your work man. you're a 16 yr. old badass in my book.
Prepare yourself though for lots of headaches from the many many users who just wont take the time to read your instructions. Never seen anything like it during my time here on XDA.
What you have done so far is remarkable (you too Mr. Mike) I can wait for stabilization if it comes, if not no biggie. You'll never hear a complaint from me bro.
You need anything, just ask. I'm available to those who are serious like yourself (you too Mr. Mike )
Anyways, thanks buddy. For everything.
MAME Arcade said:
but now i have another problem, whenever wifi is turned on (cricket model) it will freeze thewn reboot a a fewv seconds later.
Click to expand...
Click to collapse
I'll talk more to my Cricket tester and see if he has the same issue.
EDIT: I updated the OP and added this.
CSP III said:
Appreciate your work man. you're a 16 yr. old badass in my book.
Prepare yourself though for lots of headaches from the many many users who just wont take the time to read your instructions. Never seen anything like it during my time here on XDA.
What you have done so far is remarkable (you too Mr. Mike) I can wait for stabilization if it comes, if not no biggie. You'll never hear a complaint from me bro.
You need anything, just ask. I'm available to those who are serious like yourself (you too Mr. Mike )
Anyways, thanks buddy. For everything.
Click to expand...
Click to collapse
Thanks! This is actually further than I initially envisioned myself making it. It's fun to do this type of stuff actually. I bought my 510 off-contract and never activated it, with the intent of just doing this stuff to it.
r3pwn said:
I'll talk more to my Cricket tester and see if he has the same issue.
EDIT: I updated the OP and added this.
Thanks! This is actually further than I initially envisioned myself making it. It's fun to do this type of stuff actually. I bought my 510 off-contract and never activated it, with the intent of just doing this stuff to it.
Click to expand...
Click to collapse
Love the progress. This rom is awesome. I have two HTC Desire 510's. After reading the "Not Working Section" I realized that data doesn't work on virgin mobile just yet. So, I will re-install this rom on my non activated one and follow your progress until calls, messaging and camera works. Then, I will install it on my activated one. But, thumbs up my friend. You beat MIUI to the punch in getting a modern rom started for this device. They still work on dinosaur HTC device roms. LOL!!
when will this be stable this rom looks awesome keep up the good work
Man r3pwn killin it!! Amazing work my dude mad props too! Goin test this out later on my vm desire, thanks r3pwn!
Sent from my 0PCV1 using XDA Free mobile app
s3llz said:
Love the progress. This rom is awesome. I have two HTC Desire 510's. After reading the "Not Working Section" I realized that data doesn't work on virgin mobile just yet. So, I will re-install this rom on my non activated one and follow your progress until calls, messaging and camera works. Then, I will install it on my activated one. But, thumbs up my friend. You beat MIUI to the punch in getting a modern rom started for this device. They still work on dinosaur HTC device roms. LOL!!
Click to expand...
Click to collapse
Data doesn't work, but calls and texts should work fine.
michaelvu1811 said:
when will this be stable this rom looks awesome keep up the good work
Click to expand...
Click to collapse
I have no idea when I will be able to get everything working.
Flash_Aholic said:
Man r3pwn killin it!! Amazing work my dude mad props too! Goin test this out later on my vm desire, thanks r3pwn!
Sent from my 0PCV1 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks! I have the Sprint variant, myself.
r3pwn said:
Data doesn't work, but calls and texts should work fine.
I have no idea when I will be able to get everything working.
Thanks! I have the Sprint variant, myself.
Click to expand...
Click to collapse
I must have done something wrong when installing. LOL!! I'm not an expert at flashing. So I don't doubt that I did something wrong. Ok, i'm gonna go back and retrace my steps on the flash and make sure I didn't miss any steps. Wait, I think I did. Is the boot image that needs to be extracted from the zip for those of us who are still s-on does that mean it needs to be completely out of the zip and then flashed in fastboot? If so, that is were I messed up at. And when whipping, do we factory whip or advance whip? Just wanna make sure. If I can at least get calls and text working, I'll be fine.
s3llz said:
I must have done something wrong when installing. LOL!! I'm not an expert at flashing. So I don't doubt that I did something wrong. Ok, i'm gonna go back and retrace my steps on the flash and make sure I didn't miss any steps. Wait, I think I did. Is the boot image that needs to be extracted from the zip for those of us who are still s-on does that mean it needs to be completely out of the zip and then flashed in fastboot? If so, that is were I messed up at. And when whipping, do we factory whip or advance whip? Just wanna make sure. If I can at least get calls and text working, I'll be fine.
Click to expand...
Click to collapse
You can leave the zip as it is, you just have to make sure that you flash the boot image in fastboot. When I wipe, I usually pick "Advanced Wioe" and wipe system, data, cache, dalvik-cache and sometimes even internal storage.
will this work with boost mobile ?? i 1. Download the ROM zip to your computer.
2. Extract the "boot.img" from the zip file.
3. Put the zip file on your device and flash it in TWRP.
4. Reboot the device to fastboot mode and, on your computer, flash the boot image you extracted to your device by issuing the command "fastboot flash boot boot.img"
5. Reboot normally that all went great ! but cant - Call , Text ,
markuaw1 said:
will this work with boost mobile ?? i 1. Download the ROM zip to your computer.
2. Extract the "boot.img" from the zip file.
3. Put the zip file on your device and flash it in TWRP.
4. Reboot the device to fastboot mode and, on your computer, flash the boot image you extracted to your device by issuing the command "fastboot flash boot boot.img"
5. Reboot normally that all went great ! but cant - Call , Text ,
Click to expand...
Click to collapse
It should work, but based on what other people are saying, I guess not. I'll update the OP
thank you sir
r3pwn said:
It should work, but based on what other people are saying, I guess not. I'll update the OP
Click to expand...
Click to collapse
it did install with no problem and wifi is working fine
r3pwn said:
It should work, but based on what other people are saying, I guess not. I'll update the OP
Click to expand...
Click to collapse
Hey, you are doing fine. No complaints here. I know from experience that it takes time to get these roms fully running. Plus, I'd rather you be in good spirit while working on this masterpiece. :fingers-crossed::victory: