[Q] Autobrightness Problem - One (M7) Q&A, Help & Troubleshooting

Hi, got an HTC one recently but i'm having problems with autobrightness seems like the low brightness setting for for phone turns screen completely off. I went to brightness setting manually and drag the slider to the lowest point but the screen will completely turn off just before it reaches the last point so i downloaded lux from the store and checked it the screen while turn off below 15 lux. So my question is, is this a hardware defect or can i install firmware or anyother software to calibrate the light sensor? thanks guys.

Related

[Q] Backlight issue

We just picked up a used Droid for the dev department to play with. The backlight comes on during boot up but goes off as soon as it gets into the OS. Settings appear to be normal (full brightness). Any ideas?
hard reset didn't help. The backlight goes off at the exact moment the buzzer announces the os startup. (if that makes sense)
try using other roms..
Working on rooting and loading a rom right now. I took the phone home with me and discovered the backlight isn't out just very dim. It will change slightly when I move the brightness slider around.
OK, it's now running Steel Droid with the same issue. I have a bright screen in recovery and during boot and a very dim one once booted.
try to un-check the automatic brightness, and set it to full brightness...
if that doesnt work... might be a hardware related problem...
Did that already. Seems like an odd hardware issue. I have full backlight in recovery and during boot.
Here is a video of the issue http://www.youtube.com/watch?v=RxHqN_lycG8
Stupid question: do you have auto-brightness active? If so, maybe your light sensor could be broken.
downloadman said:
Stupid question: do you have auto-brightness active? If so, maybe your light sensor could be broken.
Click to expand...
Click to collapse
Auto-brightness is unchecked and the brightness is set to max. There is a very slight change to the brightness when I adjust the slider back and forth.
BTW. It is currently running CM7 with the same issue.

Bad Brightness issue Z1S

I need help with the screen on my Z1S, for some reason the display keeps flickering like mad, it's a brightness issue i think, it keeps flickering dimmer and brighter over and over again, i reset the phone with flashtool using a ftf but it is still occuring, 90% of the time? I have no idea what it could be. I even turned off auto brightness and it still occurs

MeMo Pad ME572c fluctuating brightness

Just picked up an ME572c and I'm very impressed for the price. However I have noticed the screen brightness levels keep fluctuating as if the light sensor is constantly detecting different light levels.
Has anyone else experienced this?
madgibbon said:
Just picked up an ME572c and I'm very impressed for the price. However I have noticed the screen brightness levels keep fluctuating as if the light sensor is constantly detecting different light levels.
Has anyone else experienced this?
Click to expand...
Click to collapse
Hi,
i notice this too, but that can be related to the power saving mode. Plz turn it off and check the settings in detail. Maybe that helps.
Further inside the developer options there is another option to configure the auto brightness.
You can change the behaviour from dynamic to immediately or slow mode and active an onscreen lux, gain and brightness value display.
Btw i am not satisfied with the auto control, as for my taste the brightness is still too low in a less lighted room. Sensor is reporting 0 lux already with a brightness of 14 which would be ok for a really dark room & night but not at daytime.
What is your experience?
I tried playing with power saving mode and the auto brightness controls in developer options. While I could reduce the fluctuations, I could eliminate them completely. Unfortunately I found it too distracting and returned the device earlier today. It's a shame as everything else was quite impressive for the money.
I also found the fluctuations annoying, my solution was to turn the auto-brightness off. Honestly I dislike auto-brightness on any device, it was also one of the first things I turned off on my laptop.
I am using Lux app now and raised minimum brightness at 0 lux. Thats ok for me now.
tycoo said:
Hi,
i notice this too, but that can be related to the power saving mode. Plz turn it off and check the settings in detail. Maybe that helps.
Further inside the developer options there is another option to configure the auto brightness.
You can change the behaviour from dynamic to immediately or slow mode and active an onscreen lux, gain and brightness value display.
Btw i am not satisfied with the auto control, as for my taste the brightness is still too low in a less lighted room. Sensor is reporting 0 lux already with a brightness of 14 which would be ok for a really dark room & night but not at daytime.
What is your experience?
Click to expand...
Click to collapse
Just bumping this to confirm this works and so that others can see. I used Developer options as well (before I found this post) and noticed the instant setting works best.
One more setting to also double check... Make sure that in developer options under auto brightness that you disable allow change gain...
Even with everything disabled it appears as if something still is changing the display. I particularly see it with something like a reddit browser when I'm viewing pictures. You click the pic, it loads and displays and then 1-2 seconds later the display adjusts based upon what is being displayed. Depending upon the picture it can be pretty annoying. I may have to root and start poking around to find out what is causing this.
with the lollipop update this issue is fixed for me.
Is lollipop really solve the problem?
muiriddin said:
with the lollipop update this issue is fixed for me.
Click to expand...
Click to collapse
Hello!
Im on lollipop, but the problem you had, still occur at me.
Did you noticed this problem, since you on lollipop?
I have the same problem. When i read, or browsing, the brightness changes in 2-3 steps.

[Q] Droid 4 backlight failure on automatic brightness.

Hello!
I wonder if anyone had this issue. Yesterday suddenly the backlight of my XT894 started to act weirdly. When i pressed the unlock button, the screen would go very bright and then shut off after 2-3 seconds, but I still could swype the unlock screen and hear the unlock click, even with the dark screen. With a little bit of external light I could see the image was there, but the backlight of the screen was not on. I went on to the power shortcuts and disabled the Automatic brightness control, and as soon as I did that the display turned on, very dimly but it turned on. When I set the brightness control to maximum, it still is very low. If i set the brightness to minimum, its almost impossible to see anything. In display settings, the automatic brightness is unchecked and the brightness fader is set to maximum.
I started suspecting the light sensor, so I went ahead and downlaoded a sensor tester app, and the light sensor appeared to be reporting the light levels correctly - low readings in the dark, and much higher readings in direct light.
Is my phone backlight dying? Any idea if this might be due to defective mainboard, or the display itself?
I already did some repairing on the phone myself, so I am comfortable dissassembling it and changing parts. Few months ago I changed the main board because my old one had a broken usb connector, and it worked fine until now.
Any advice would be greatly appreciated!
Thank you in advance!
Best regards,
Konstantin
If I remember right, by default, the maximum auto-brightness is still lower than actual maximum, so if the screen can barely be seen at manual max, it makes sense that the screen is pretty much unviewable with auto on.
Idea:
If you have it installed, boot into Safestrap and see if your brightness is normal.
If not, pull up the diagnostic menu (hold Vol - while powering on iirc, might be Vol - and +).
If your brightness is normal in those, it's probably something gone wonky in Android. If not, your screen backlight might be going and needs replaced. I don't think there's anything on the mainboard that would cause it, aside from the circuitry actually supplying power to the backlight...
Screen replacement actually isn't terrible for the D4, if it comes to that, since it's not fused to the glass (like certain single-piece phones for example...*sideways glance at the S3*).
Hello!
Thank you for your reply!
Effectively something is very wrong with the device. Today I woke up to find it completely unresponsive, had to turn it off by holding the power button for a while. When it turned on again, the whole screen was white with glitchy color lines since the very reboot, and nothing else happens, couldnt even turn it off without unscrewing the battery.
I will put the old main board to see if the other one died.
Thank you again!
Best regards,
Konstantin

Z3C backlight problem (dim display)

Hi guys so the screen suddenly went dim and brightness wont work, opened up the back and used some pressure on the digitizer flex connector as you can see in the video here.
https://www.youtube.com/watch?v=ZGPkFp4Aphs
Now i'm wondering who's fault is and don't know if replacing the display will solve the issue.
What do you guys think?
I know when I have adaptive brightness on, my screen will do something similar to this where it won't go any brighter
Maybe try disabling Adaptive brightness?

Categories

Resources