Related
Hello,
Is there any one using the ATT GS5 on Tmobile network (obviously Tmobile SIM) with wifi calling working ? (Please..please.. I know ATT does not have wifi calling, But if you use a Tmobile Rom with Tmobile sim, you expect to have it working) !!
If yes, would you please share which ROM you are using ? Also if there is a trick to make it wok please share it?
Thanks
no luck so far
This is not a solution, I just wanted to report what I have tried so far.
I have a G900A with a t-mobile SIM card. I called TMO to make sure wifi calling was enabled on my line. I used towelroot + safestrap to install the t-mobile Alliance rom (B4), as well as the latest stock TMO rom. So far, wifi calling does not work. It is always stuck on "Enabling" in the calling options menu. VoLTE doesn't work either, but I wasn't expecting it to. My guess is that there is something in the TMO baseband that makes these things work and that ATT phones don't have.
Any hints and ideas would me much appreciated!
No solution yet...
Guillaume2x said:
This is not a solution, I just wanted to report what I have tried so far.
Any hints and ideas would me much appreciated!
Click to expand...
Click to collapse
JJ here,
I tried this ROM - [ROM] G900TUVU1BNH5 ported from TMobile, rooted, deodexed, no knox, Download Booster
... everything works, nice and smooth, but the Wifi Calling is stuck "Enabling"...
Same boat.
My att s5 is unlocked and on the tmobile network. Your telling me i can flash the tmobile stock rom? And everything will be working properly, except wifi calling?
chronichemp said:
My att s5 is unlocked and on the tmobile network. Your telling me i can flash the tmobile stock rom? And everything will be working properly, except wifi calling?
Click to expand...
Click to collapse
Yes. In particular, Mobile Hotspot will work.
Guillaume2x said:
Yes. In particular, Mobile Hotspot will work.
Click to expand...
Click to collapse
Will everything else work properly? I mainly need the t mobile stock rom to enable mobile hotspot, I have an ATT phone and do not wish to trip efuse. Thanks
does anyone know if the same issue will happen with the international version?
On a similar topic, my dad has a AT&T Samsung Galaxy S5 which was sold in Malaysia. And I found out that his phone was not able to hotspot. I have downloaded the official firmware of Samsung Galaxy S5 for Malaysia and was going to use Odin to flash the firmware into his phone. Does that work and not brick the phone? The phone seems to be unlocked as it can be used here except the firmware and the phone is AT&T barnded. Any advise? Thanks
Sent from my iPad using Tapatalk
It all works!
Guys, I have some great news. Both wifi calling AND VoLTE now work on my SM-G900A on the T-mobile network. Here is what I did:
I installed the latest ATT firmware (OA1), released earlier this February. OTA update did not work, so I had to flash the original firmware (ANCE) via Odin, and then flash the two subsequent updates using update.zip on the SD Card. This will remove safestrap and root, but fear not.
Once my phone had AO1 installed, I used this tutorial to root the phone again. It invonves temporarily flashing an earlier (ND3) kernel, using TowelRoot, and then reflashing the OA1 kernel
With my OA1 rooted, I installed safestrap. Make sure you install busybox first.
With safestrap, I installed the T-mobile Alliance Rom (build B4).
Seconds after booting, both Wifi Calling and Voice over LTE work!
Enjoy!
Guillaume
Hi Guillaume,
Have you tried just installing the stock T-mobile 5.0 firmware on a Att GS5 ?
I have my GS5 in ND3 rooted and I'm on Tmobile, but the procedure you have seems really long...
I really need wifi calling as I'm travelling a lot and it allows to call my wife when I'm back in France.
Thanks
Guillaume2x said:
Guys, I have some great news. Both wifi calling AND VoLTE now work on my SM-G900A on the T-mobile network. Here is what I did:
I installed the latest ATT firmware (OA1), released earlier this February. OTA update did not work, so I had to flash the original firmware (ANCE) via Odin, and then flash the two subsequent updates using update.zip on the SD Card. This will remove safestrap and root, but fear not.
Once my phone had AO1 installed, I used this tutorial to root the phone again. It invonves temporarily flashing an earlier (ND3) kernel, using TowelRoot, and then reflashing the OA1 kernel
With my OA1 rooted, I installed safestrap. Make sure you install busybox first.
With safestrap, I installed the T-mobile Alliance Rom (build B4).
Seconds after booting, both Wifi Calling and Voice over LTE work!
Enjoy!
Guillaume
Click to expand...
Click to collapse
Thanks as this is great news for us G900A users on TMO! Question though: After 0A1 installed/backedup and Alliance installed, did you use safestrap [TWRP] to restore your data from 0A1 install?
Geek007W said:
Thanks as this is great news for us G900A users on TMO! Question though: After 0A1 installed/backedup and Alliance installed, did you use safestrap [TWRP] to restore your data from 0A1 install?
Click to expand...
Click to collapse
Actually no; I had been using the t-mo alliance rom using safestrap for a long time (just with the old ATT modem and kernel), so I just restored the data associated with that.
Some more info after a day of tests:
You can also install the 5th build of Alliance Rom, it works too
The camera sometimes glitches a bit; toggling HDR on/off fixes it
Except for the camera glitch I'm pretty happy with it!
Jojososo said:
Hi Guillaume,
Have you tried just installing the stock T-mobile 5.0 firmware on a Att GS5 ?
I have my GS5 in ND3 rooted and I'm on Tmobile, but the procedure you have seems really long...
I really need wifi calling as I'm travelling a lot and it allows to call my wife when I'm back in France.
Thanks
Click to expand...
Click to collapse
I might to try to create a flashable zip from the latest t-mobile lollipop release, keeping only the /system files, and see how that goes. This is really a shot in the dark, hoping that the 4.4.4 modem and kernel from ATT somehow work well enough with the t-mobile lollipop rom. Damn you locked bootloader!
Guillaume2x said:
Actually no; I had been using the t-mo alliance rom using safestrap for a long time (just with the old ATT modem and kernel), so I just restored the data associated with that.
Some more info after a day of tests:
You can also install the 5th build of Alliance Rom, it works too
The camera sometimes glitches a bit; toggling HDR on/off fixes it
Except for the camera glitch I'm pretty happy with it!
I might to try to create a flashable zip from the latest t-mobile lollipop release, keeping only the /system files, and see how that goes. This is really a shot in the dark, hoping that the 4.4.4 modem and kernel from ATT somehow work well enough with the t-mobile lollipop rom. Damn you locked bootloader!
Click to expand...
Click to collapse
Agree with the last expletive.
I did install in alliance B4 in slot 1 of Safestrap and both wi-fi tether and calling worked well. However, my G900A would not reboot or shutdown (dark screen) without a battery pull. After power up...worked?!?!
Did you install as "Stock" or in a slot?
Also have a G870A (Active). Do you know of anyone attempting the 0A1 method and Alliance Rom with the s5 Active?
I might to try to create a flashable zip from the latest t-mobile lollipop release, keeping only the /system files, and see how that goes. This is really a shot in the dark, hoping that the 4.4.4 modem and kernel from ATT somehow work well enough with the t-mobile lollipop rom. Damn you locked bootloader!
Click to expand...
Click to collapse
What would happen if I odin a Stock T-mobile firmware and let T-mobile update it ?
Will it update the Baseband etc ?
Geek007W said:
Did you install as "Stock" or in a slot?
Click to expand...
Click to collapse
I only use the stock slot.
B4 seems a bit more than stable than B5 for some reason. I get some signal issues with B5, and the fingerprint scanner sometimes fails. (It works when I first install B4, use it for a while, and then upgrade to B5. But if I do a /data wipe on B5, these issues appear. I have no idea why).
---------- Post added at 06:15 PM ---------- Previous post was at 06:11 PM ----------
Jojososo said:
What would happen if I odin a Stock T-mobile firmware and let T-mobile update it ?
Will it update the Baseband etc ?
Click to expand...
Click to collapse
You can't do that, the bootloader is locked.
Guillaume2x said:
You can't do that, the bootloader is locked.
Click to expand...
Click to collapse
Okay thanks,
So I started the steps, I've Odin the original firmware and factory reset on but my baseband stayed ND3...
Tried the OTA update hoping that it would work, but as expected it did not.
So I guess I'm at step 1 of your step one.
Then you said you pushed the update via sd card, where did you find the updates ?
Then I'll do the other steps!
Baby steps by baby steps, F... it's been a long time since I rooted my ipod 1st gen to crack my ps3!
Jojososo said:
Okay thanks,
Then you said you pushed the update via sd card, where did you find the updates ?
!
Click to expand...
Click to collapse
They are in the post that I linked to, under the troubleshooting section. If you want to keep your user data, use adb sideload instead of recovery
Guillaume2x said:
I only use the stock slot.
B4 seems a bit more than stable than B5 for some reason. I get some signal issues with B5, and the fingerprint scanner sometimes fails. (It works when I first install B4, use it for a while, and then upgrade to B5. But if I do a /data wipe on B5, these issues appear. I have no idea why).
Click to expand...
Click to collapse
OK. Installed in stock slot but ROM behaved much differently.
1. Wifi sms/mms work both send/receive but erratically.
2. Outgoing calls connect then immediately drop with local "cancelled" within a few milli-secs with a partial ring at the far end.
3. Can't receive calls at all. TMO network thinks I'm offline even though can receive a text.
3. Phone App GUI stutters when making a call.
4. Camera is basically not usable.
Where there any special steps you took to get this working installed in the stock slot? Has your install remained stable? Thanks in advance.
Geek007W said:
OK. Installed in stock slot but ROM behaved much differently.
1. Wifi sms/mms work both send/receive but erratically.
2. Outgoing calls connect then immediately drop with local "cancelled" within a few milli-secs with a partial ring at the far end.
3. Can't receive calls at all. TMO network thinks I'm offline even though can receive a text.
3. Phone App GUI stutters when making a call.
4. Camera is basically not usable.
Where there any special steps you took to get this working installed in the stock slot? Has your install remained stable? Thanks in advance.
Click to expand...
Click to collapse
My phone is still working flawlessly. What your are describing is what happened to me during the short period I reverted to the NG3 kernel in order to use Towelroot. Did you make sure to reflash the OA1 kernel once you were rooted? (before installing safestrap and, within safestrap, installing the Alliance Rom). I have found Alliance B4 to be more stable, so you could try that. Finally, a factory reset (wipe option in safestrap). Beyond that, you could try the whole thing again: flash the "downgrade to NCE" rom, which will remove safestrap and clean everything up; and take the tutorial from there.
Guillaume2x said:
My phone is still working flawlessly. What your are describing is what happened to me during the short period I reverted to the NG3 kernel in order to use Towelroot. Did you make sure to reflash the OA1 kernel once you were rooted? (before installing safestrap and, within safestrap, installing the Alliance Rom). I have found Alliance B4 to be more stable, so you could try that. Finally, a factory reset (wipe option in safestrap). Beyond that, you could try the whole thing again: flash the "downgrade to NCE" rom, which will remove safestrap and clean everything up; and take the tutorial from there.
Click to expand...
Click to collapse
Thanks again Guillaume,
Was running OA1 prior to Alliance B3, so just wiped Dalvik and Cache again, rebooted and left phone for the night. By next morning all was well except for the camera HDR issue. Once toggled it is OK until closed and reopened. Haven't had the time to look into whether there are Alliance B4 options which may affect this.
Have run it a few days and have had zero issues with Wi-Fi calling or tethering or apps: a very smooth experience.
Thanks again for your contribution. Also muniz_ri will find a bottle of wine on the doorstep soon. :highfive:
Good day everyone! I've had the HTC One for over a year now, and about six months ago I stopped paying the phone bill on the phone because for some reason Sprint said I owed them $500+; I continued to use it as a WIFI-only device though. Recently, a family member allowed me to come on their Sprint plan and they even bought me a Galaxy S4; unfortunately the screen cracked a month ago(stupid samsung). So I placed the LTE sim from the S4 into the HTC One and I was able to receive LTE and 3G; though there were drawback such as having to turn airplane mode on then back off again every hour or two. I recently flashed the new lollipop ROM, and for some reason I don't have LTE/3G; the icons are there but when I try to look up something it performs as if I have no internet. When I flashed back to the previous KitKat ROM and restored my data, I had Internet again. I believe that because I used the same ROM when I had service is the reason I can use LTE/3G; some system app is probably holding my account information. I'll also note I can't activate the phone when I flash the lollipop ROM because I have no service, though after the self-service app gives up and allows me to access the phone, the LTE/3G icons are up there; just no internet. I can't recovery restore my Kitkat data into the lollipop ROM, because I'll enter an inescapable, never-ending boot loop until the phone dies. So I'll have to titanium backup my data, I just don't know where my account information data is located; any help?
It sounds like you didn't update the radios and firmware. If you try to run a lollipop ROM with older ones, you won't get data.
coal686 said:
It sounds like you didn't update the radios and firmware. If you try to run a lollipop ROM with older ones, you won't get data.
Click to expand...
Click to collapse
I updated my phone using the firmware that excludes boot and recovery; that's why I can even boot into lollipop.
Edit: I'll update radio only and try my luck.
austrie said:
I updated my phone using the firmware that excludes boot and recovery; that's why I can even boot into lollipop.
Edit: I'll update radio only and try my luck.
Click to expand...
Click to collapse
I think that firmware comes with the updated radios. Just to make sure, I'd update using the full firmware and then reflash recovery. That way you know everything is up to date.
Since I first started down this Android path I've always brought my phones direct from big red which, for all the problems it created it did make life simple when it came to identify which ROM to download etc.
This week I broke tradition and dropped some money on Google's lap and picked up a Nexus 6 direct from them - no more locked down to VZW for me if I so choose.
Previously I had a Incredible, then a GS III then finally a M8 - all three rooted and unlocked\S-OFF'd so this isn't my first rodeo.
That said I'm also wanting to tread VERY VERY lightly here because time and time again I read the the biggest reason folk get bricks is because they assumed and didn't ask questions before they flashed.
So, all this aside, here I am with my now Unlocked 5.0 Non branded Nexus 6 with LNX07M with TWRP 2.8 latest as a custom recovery and, as of right now, no root (to help ease any upgrade).
I've found various Stock ROMS out there there would indicate I'd need to be however on 5.0.1 before I could sideload a 5.1.1. Is this true? If so, do I need to blow away TWRP before I do this because when I tried previously to take the update it dropped me into TWRP.
Is there any way I can avoid all this, wipe and flash a Stock 5.1.1 direct? Wiping the phone isn't an issue as there's nowt on it right now. And should I root now, while still on 5.0 or wait until 5.1.1 (because it'll require a factory reset). Would root even survive a 5.1.1 upgrade?
I'm nervous here because I keep seeing lines such as 'T-MOBILE only' and different code letters after the build name seemingly signifying the different vendors. Given that I got mine direct from Google though I'm unsure how I should proceed because I really don't want to be left with an unhappy 6 so soon after delivery.
Thanks in advance!
R
Rachel Ambler said:
Since I first started down this Android path I've always brought my phones direct from big red which, for all the problems it created it did make life simple when it came to identify which ROM to download etc.
This week I broke tradition and dropped some money on Google's lap and picked up a Nexus 6 direct from them - no more locked down to VZW for me if I so choose.
Previously I had a Incredible, then a GS III then finally a M8 - all three rooted and unlocked\S-OFF'd so this isn't my first rodeo.
That said I'm also wanting to tread VERY VERY lightly here because time and time again I read the the biggest reason folk get bricks is because they assumed and didn't ask questions before they flashed.
So, all this aside, here I am with my now Unlocked 5.0 Non branded Nexus 6 with LNX07M with TWRP 2.8 latest as a custom recovery and, as of right now, no root (to help ease any upgrade).
I've found various Stock ROMS out there there would indicate I'd need to be however on 5.0.1 before I could sideload a 5.1.1. Is this true? If so, do I need to blow away TWRP before I do this because when I tried previously to take the update it dropped me into TWRP.
Is there any way I can avoid all this, wipe and flash a Stock 5.1.1 direct? Wiping the phone isn't an issue as there's nowt on it right now. And should I root now, while still on 5.0 or wait until 5.1.1 (because it'll require a factory reset). Would root even survive a 5.1.1 upgrade?
I'm nervous here because I keep seeing lines such as 'T-MOBILE only' and different code letters after the build name seemingly signifying the different vendors. Given that I got mine direct from Google though I'm unsure how I should proceed because I really don't want to be left with an unhappy 6 so soon after delivery.
Thanks in advance!
R
Click to expand...
Click to collapse
The main reason that some users bricked their phone is that they wiped the OS and had a locked bootloader which leaves no possibility ro recover the phone
What carrier do you use?
T-Mobile would be the LYZ28E rom and ATT/USC/International devices would be LMY47Z and Verizon is LMY47E.
Look here http://forum.xda-developers.com/nexus-6/general/ref-nexus-6-stock-ota-urls-t2906493 and here http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008.
Unless something is special about the N6 that I'm not aware of, the OS you update FROM only matters if you're sideloading an OTA file. Flashing factory images, you could be coming from a custom ROM(I just took my old N4 from CM12.1 to stock 4.4 on Sunday).
The current build for VZW is 5.1 LMY47E. I think they are updating to 5.1.1 now(LMY47Z, which seems to be universal now except for maybe T-Mo). I flashed mine from E to Z on Saturday because I bought mine unlocked but it had the VZW build, and I'm on an AT&T MVNO.
gee2012 said:
What carrier do you use?
T-Mobile would be the LYZ28E rom and ATT/USC/International devices would be LMY47Z and Verizon is LMY47E.
Look here http://forum.xda-developers.com/nexus-6/general/ref-nexus-6-stock-ota-urls-t2906493 and here http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008.
Click to expand...
Click to collapse
Still with VZW for now, but, as I said, I didn't purchase the phone from them, I brought it from Google direct so it's carrier agnostic (well, in the US at least!) hence my confusion. The last thing I want to do is flash a ROM that's carrier specific but I don't know which one to take with this being the case.
As for the order, my M8 needed to go in two stages to jump from my old Venom build due to changes with the radio (I think) - hence my question there.
If you root, you'll.never get an OTA anyway, sonit doesn't matter which rom you flash aa you can flash any other rom.over it
None of the carrier specific roms will restrict anything, or add branding, so go for whichever.
Rachel Ambler said:
Still with VZW for now, but, as I said, I didn't purchase the phone from them, I brought it from Google direct so it's carrier agnostic (well, in the US at least!) hence my confusion. The last thing I want to do is flash a ROM that's carrier specific but I don't know which one to take with this being the case.
As for the order, my M8 needed to go in two stages to jump from my old Venom build due to changes with the radio (I think) - hence my question there.
Click to expand...
Click to collapse
Just flash the LMY47E rom and when its available you get the OTA to update or sideload the OTA from here http://forum.xda-developers.com/nexus-6/general/ref-nexus-6-stock-ota-urls-t2906493 when its available.
danarama said:
None of the carrier specific roms will restrict anything, or add branding, so go for whichever.
Click to expand...
Click to collapse
Really? Is there a reason why they exist then? Usually my understanding was that they contained carrier specific items including radios and bloatware.
Rachel Ambler said:
Really? Is there a reason why they exist then? Usually my understanding was that they contained carrier specific items including radios and bloatware.
Click to expand...
Click to collapse
There's no bloatware on these roms.
Verizon rom includes binaries that make VoLTE work properly on their network where as T-mobile adds a kernel fix to allow their wifi calling to work. And that's it...
gee2012 said:
Just flash the LMY47E rom and when its available you get the OTA to update or sideload the OTA from here http://forum.xda-developers.com/nexus-6/general/ref-nexus-6-stock-ota-urls-t2906493 when its available.
Click to expand...
Click to collapse
So what would be the benefit of flashing a Verizon ROM is, for example I should suddenly decide to go to T-Mobile next week given that I didn't purchase the phone from them?
Sorry if these are noob questions but this whole carrier agnostic\yet not agnostic thing has me really wanting to make sure my phone stays as agnostic as it was when it left the factory, bar a VZW Sim nestled inside and a VZW APN entry.
danarama said:
There's no bloatware on these roms.
Verizon rom includes binaries that make VoLTE work properly on their network where as T-mobile addsna kernel fix to allow their wifi calling to work. And that's it...
Click to expand...
Click to collapse
Interesting. So this would leave me to believe then that, should I decide one day to jump carriers, I'd be better off flashing a ROM for that carrier at the appropriate time?
This being the case, why would the phone come with no carrier specific software on board from Google? Wouldn't this mean I might get a degraded service?
Rachel Ambler said:
So what would be the benefit of flashing a Verizon ROM is, for example I should suddenly decide to go to T-Mobile next week given that I didn't purchase the phone from them?
Sorry if these are noob questions but this whole carrier agnostic\yet not agnostic thing has me really wanting to make sure my phone stays as agnostic as it was when it left the factory, bar a VZW Sim nestled inside and a VZW APN entry.
Click to expand...
Click to collapse
If you want to use T-Mobile in the future you just flash the LYZ28E rom.
Rachel Ambler said:
So what would be the benefit of flashing a Verizon ROM is, for example I should suddenly decide to go to T-Mobile next week given that I didn't purchase the phone from them?
Sorry if these are noob questions but this whole carrier agnostic\yet not agnostic thing has me really wanting to make sure my phone stays as agnostic as it was when it left the factory, bar a VZW Sim nestled inside and a VZW APN entry.
Click to expand...
Click to collapse
Well all Nexus 6 used to get the same updates but tmob and red, wanted approval on theirs - and now we know why.
Since google are still sending these updates and they update onto generic builds, they can only use your sim card as the identifier.
If you leave root out of it, the only way you can avoid the vzw update is to manually update to something else (something vzw updates won't work on). Each OTA looks for a specific build to flash on and won't flash on anything else.
If you do accept the vzw update, you'll never get away from them unless you manually flash a full factory rom.
Bringing root back into it, OTA will never flash anyway, so you'll have to either manually flash factory or flash rom.zips in TWRP
gee2012 said:
If you want to use T-Mobile in the future you just flash the LYZ28E rom.
Click to expand...
Click to collapse
This is already explaining a lot! So, given that, as I said, I'm not bog standard non-carrier specific 5.0 (and I've yet to even migrate my SIM over) the suggested action would be to download LMY47E 5.1 (as 5.1.1 is not yet out for VZW as they ALWAYS seem to be last to the party) and flash it via TWRP? And I can do that over my LNX07M build?
danarama said:
"Well all Nexus 6 used to get the same updates but tmob and red, ..."
Click to expand...
Click to collapse
Great info, very useful.
Rachel Ambler said:
Interesting. So this would leave me to believe then that, should I decide one day to jump carriers, I'd be better off flashing a ROM for that carrier at the appropriate time?
This being the case, why would the phone come with no carrier specific software on board from Google? Wouldn't this mean I might get a degraded service?
Click to expand...
Click to collapse
There were no carrier specific ROMs when Nexus 6 came out. Using any rom on any Nexus and they will all act the same, except you wont get improved volte or wifi calling on those carriers. Their changes will not prove detrimental on other carriers
danarama said:
Well all Nexus 6 used to get the same updates but tmob and red, wanted approval on theirs - and now we know why.
Since google are still sending these updates and they update onto generic builds, they can only use your sim card as the identifier.
If you leave root out of it, the only way you can avoid the vzw update is to manually update to something else (something vzw updates won't work on). Each OTA looks for a specific build to flash on and won't flash on anything else.
If you do accept the vzw update, you'll never get away from them unless you manually flash a full factory rom.
Bringing root back into it, OTA will never flash anyway, so you'll have to either manually flash factory or flash rom.zips in TWRP
Click to expand...
Click to collapse
Now the murky seas are de-murkyfing!
So go for the VZW build for now with the knowledge and understanding that if I ever decide to bid them a less than fond adieu, I'd be best at that point flash a factory image OR flash another carrier specific ROM once I've chosen the new carrier?
And should I root now, or post the 5.1 flash? I'm guessing post because I'd assuming flashing 5.1 would blow my root away.
I assume I can flash post VZW 5.1 because the boatloader is still all mine and the flash doesn't effect that. Right?
Rachel Ambler said:
This is already explaining a lot! So, given that, as I said, I'm not bog standard non-carrier specific 5.0 (and I've yet to even migrate my SIM over) the suggested action would be to download LMY47E 5.1 (as 5.1.1 is not yet out for VZW as they ALWAYS seem to be last to the party) and flash it via TWRP? And I can do that over my LNX07M build?
Click to expand...
Click to collapse
Depends how you do it.
Google factory images are flashed from a computer using fastboot.
You may be able to find a rom.zip of that version on xda that can be flashed via TWRP.
As long as you aren't flashing an incremental OTA, you can flash over anything. OTA actually patch files not replace them, so they can only be flashed on the rom they are intended for.
Rachel Ambler said:
Now the murky seas are de-murkyfing!
So go for the VZW build for now with the knowledge and understanding that if I ever decide to bid them a less than fond adieu, I'd be best at that point flash a factory image OR flash another carrier specific ROM once I've chosen the new carrier?
And should I root now, or post the 5.1 flash? I'm guessing post because I'd assuming flashing 5.1 would blow my root away.
I assume I can flash post VZW 5.1 because the boatloader is still all mine and the flash doesn't effect that. Right?
Click to expand...
Click to collapse
Why not go with a custom rom like chroma? Get 5.1.1 now and personally it works really well.
danarama said:
Depends how you do it.
Google factory images are flashed from a computer using fastboot.
You may be able to find a rom.zip of that version on sea that can be flashed via TWRP.
As long as you aren't flashing an incremental OTA, you can flash over anything. OTA actually patch files not replace them, so they can only be flashed on the rom they are intended for.
Click to expand...
Click to collapse
I'm sorry if that sudden flash of the light coming on in my head just blinded you, but that's what happens when things start to make sense!
OK, so, this all being the case, and that the OTA's are incremental, then in order to go 5.1 with the build from http://forum.xda-developers.com/nexus-6/general/ref-nexus-6-stock-ota-urls-t2906493 then I WOULD need 5.0.1? Would that work though if I'm on a generic build since, if it's expecting to patch existing VZW files, wouldn't it fail because they're not there? Failing that I'd need to find a flashable 5.1 for VZW (if one even exists)?
endlessryan said:
Why not go with a custom rom like chroma? Get 5.1.1 now and personally it works really well.
Click to expand...
Click to collapse
But it wouldn't have the VoLTE improvements, etc, right? Besides, right now I'd like to stay as stock as possible as it's not just my phone I'm working on, both myself and my wife got one at the same time and I know she will most definitely NOT want anything other than stock.
I recently bought a factory unlocked N910T off eBay, and it is running Lollipop. Both the OTA update module and Kies say it has the most recent firmware. We all know that is not true! Any idea what's going on? Is there something fishy or wrong with this phone? All the T-Mobile stuff like wi-fi calling and visual voicemail work fine, and the S-Pen hovers and everything so I'm sure it's not counterfeit. I presume I can still flash a stock rom through Odin or something, but I'm really bothered that the proper channels aren't working. Thoughts?
PS: My old N910T (broke the screen) got the updates just fine.
Jake of All Trades said:
I recently bought a factory unlocked N910T off eBay, and it is running Lollipop. Both the OTA update module and Kies say it has the most recent firmware. We all know that is not true! Any idea what's going on? Is there something fishy or wrong with this phone? All the T-Mobile stuff like wi-fi calling and visual voicemail work fine, and the S-Pen hovers and everything so I'm sure it's not counterfeit. I presume I can still flash a stock rom through Odin or something, but I'm really bothered that the proper channels aren't working. Thoughts?
PS: My old N910T (broke the screen) got the updates just fine.
Click to expand...
Click to collapse
Hi, I face the same scenario you described, no updates available thru official channels.
Did you already tried flashing the latest firmware thru Odin?
UPDATE: Downloaded the latest firmware with SamFirm and installed it with ODIN. No issues, my phone now haves Marshmallow.
I updated my phone yesterday not thinking and knowing they may patch that hotspot hack. I need the hotspot back for work purposes and us you all know that you can't install anything outside network on Enterprise systems. So, the PDANET+ won't help me since it will have to be actually installed on the laptop/device you are trying to get internet access to as well. I didn't want to root my Note 8 but, what options do I have to roll back to nougat 7.1.1 or other alternatives just for my hotspot.
*Grandfather Verizon Unlimited*
killdawabbit said:
I updated my phone yesterday not thinking and knowing they may patch that hotspot hack. I need the hotspot back for work purposes and us you all know that you can't install anything outside network on Enterprise systems. So, the PDANET+ won't help me since it will have to be actually installed on the laptop/device you are trying to get internet access to as well. I didn't want to root my Note 8 but, what options do I have to roll back to nougat 7.1.1 or other alternatives just for my hotspot.
*Grandfather Verizon Unlimited*
Click to expand...
Click to collapse
Try flashing verizon carrier specific U1 oreo, then flash verizon carrier csc.
illusivenick said:
Try flashing verizon carrier specific U1 oreo, then flash verizon carrier csc.
Click to expand...
Click to collapse
Any specific instructions on flashing and are those specific tar files board anywhere? I haven't flashed anything since my Galaxy S5
killdawabbit said:
Any specific instructions on flashing and are those specific tar files board anywhere? I haven't flashed anything since my Galaxy S5
Click to expand...
Click to collapse
Yes go here: https://forum.xda-developers.com/galaxy-note-8/how-to/guide-sm-n950u-u1-t3685884
First follow 'Flashing Unlocked Firmware: Steps in Post 4' and use (VZW) Verizon - N950U1UEU1AQH9/AQI5/BQK1/BQL2/BRA5
Then following 'Flashing Carrier Firmware: Steps in Post 3' and flash only VZW CSC.
Can anyone confirm if this works? And will we lose vvm and wifi calling by doing this?
Correction to thread title: should read stupid Verizon vs Oreo!
Right... Just frustrating to go through this for hotspot access now.
Caliskylightt said:
Can anyone confirm if this works? And will we lose vvm and wifi calling by doing this?
Click to expand...
Click to collapse
vvm voicemail works with this setup on att