[Q] Do i have two different mid numbers? - One (M7) Q&A, Help & Troubleshooting

Hi guys,
Bought a refurbished HTC one on Aliexpress and have a few queries.
It was advertised as being a european model (64gb, LTE) and it runs European software [ro.build.fingerprint]: htc/htc_europe/m7:4.4.3........] however I am confused with the mid.
The back of my phone states Model: PN07100
I couldnt get OTA updates originally and found I had superCID of 11111111. I then changed this several times and found that HTC__001 allowed me to get OTA.
The OTA will download but won't install as it detects my device is modified even though I haven't modified anything but the CID number. Perhaps the previous owner modified it in some way..
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HTxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: xxxxxxxxxxxx
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: HTC_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3844mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED <status read failed <Too many links>>
finished. total time: 0.071s
Using the CID getter apk, i have two values which I am not sure about:
[ro.aa.modelid]: [PN0710000]
[RO.MID]: [PN0712000]
One last piece of information is that after doing a warranty check, it states device was sold to [email protected] and it's modelid is [PN0712000]
Very confusing...
I want to get software updates as sound during calls is not working after many attempts to fix this.
I like to upgrade to stock lollipop... Can I do this easily by using an RUU?

naleyb01 said:
Hi guys,
Bought a refurbished HTC one on Aliexpress and have a few queries.
It was advertised as being a european model (64gb, LTE) and it runs European software [ro.build.fingerprint]: htc/htc_europe/m7:4.4.3........] however I am confused with the mid.
The back of my phone states Model: PN07100
I couldnt get OTA updates originally and found I had superCID of 11111111. I then changed this several times and found that HTC__001 allowed me to get OTA.
The OTA will download but won't install as it detects my device is modified even though I haven't modified anything but the CID number. Perhaps the previous owner modified it in some way..
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HTxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: xxxxxxxxxxxx
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: HTC_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3844mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED <status read failed <Too many links>>
finished. total time: 0.071s
Using the CID getter apk, i have two values which I am not sure about:
[ro.aa.modelid]: [PN0710000]
[RO.MID]: [PN0712000]
One last piece of information is that after doing a warranty check, it states device was sold to [email protected] and it's modelid is [PN0712000]
Very confusing...
I want to get software updates as sound during calls is not working after many attempts to fix this.
I like to upgrade to stock lollipop... Can I do this easily by using an RUU?
Click to expand...
Click to collapse
You will need to change your MID to the International MID: PN0710000.
The OTA looks for both the MID and CID before it will execute.
You can use this tool to change your MID.
Once you get your MID changed you can go to this site and find the RUU that matches your CID and MID.
Or attempt to download the OTA again.

Okay thank you for your help

naleyb01 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HTxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: xxxxxxxxxxxx
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: HTC_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3844mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED <status read failed <Too many links>>
finished. total time: 0.071s
Click to expand...
Click to collapse
If the error you are getting is "Variant System Version" then its definitively because of the wrong MID. X.XX.401.X version is MID PN0710000 and CID HTC__001.
Your Hboot version doesn't match your firmware version. When on 6.09.401.5 your hboot should be 1.57 not 1.44. Not sure if the OTA update will like that. Would recommend to change your MID with the tool posted above, then flash the 7.19.401.2 Firmware and finally the 7.19.401.2 RUU

Alray your method did the trick - Had issues trying to flash the RUU file but then as soon as i updated the firmware, it accepted the RUU.
Really appreciate the help guys

naleyb01 said:
Alray your method did the trick - Had issues trying to flash the RUU file but then as soon as i updated the firmware, it accepted the RUU.
Click to expand...
Click to collapse
Yep, flashing the firmware before the RUU wasn't optional. To be able to flash a 7.xx ruu you need 4 things:
Firmware must be at least 6.xx --> ok
CID must match --> ok HTC__001
MID must match --> fixed to PN0710000
HBoot must be at least 1.57 --> That's why you need to flash the firmware first, to update your hboot to 1.57, you were on 1.44...

Related

Need help gaining s-off and LOCKING bootloader

I just need help with gaining S-off with HTC One Toolkit 2.0. When i try to prepare revone it just says: error code = 1.
I have unlocked bootloader and currently running ARHD 20.1 android 4.3 I heard that i need to have android 4.2.2 to gain S-off with revone. I dont know is that true or not, but if it needs to be on android 4.2.2 or lower then what ROM should i flash or should i flash shipped RUU.zip
This is my getvar:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: 0000000000000
(bootloader) imei: 000000000000000
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3824mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.042s
I realy need help with reverting booltoader to locked because my camera realy sucks it has more then few dead pixels and every day there is new dead pixels on camera sensor. I just called the service and they told me that they cant do anything if bootloader is unlocked.
irumora said:
I just need help with gaining S-off with HTC One Toolkit 2.0. When i try to prepare revone it just says: error code = 1.
I have unlocked bootloader and currently running ARHD 20.1 android 4.3 I heard that i need to have android 4.2.2 to gain S-off with revone. I dont know is that true or not, but if it needs to be on android 4.2.2 or lower then what ROM should i flash or should i flash shipped RUU.zip
This is my getvar:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: 0000000000000
(bootloader) imei: 000000000000000
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3824mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.042s
I realy need help with reverting booltoader to locked because my camera realy sucks it has more then few dead pixels and every day there is new dead pixels on camera sensor. I just called the service and they told me that they cant do anything if bootloader is unlocked.
Click to expand...
Click to collapse
Yes you need to go back to a 4.2.2 build... ARHD 13.4 should be ok. If you don't have 13.4 saved somewhere then ask in the ARHD thread if anyone can help or join us in the ARHD irc channel and we may be able to help you there.
No you don't, the build they're on now is fine as it's 4.1.2 not 4.2.2
Edit: that's the firmware, yes ROM also needs lowering
Sent from my HTC One using XDA Premium 4 mobile app

[Q] Install Different RUU, currently running Google Edition

Hello,
I am having all sorts of issues installing a different RUU. I use to have a O2 version of the RUU, I changed this to the Google Edition by unlocking, S-OFF, changing the MID and CID and then flashed the RUU.
I now would like to install a different RUU such as Android Revolution but I keep getting the 24 android.txt error. I have tried to change the MID and CID to a WWE version but to no avail.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.14.1700.15
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: REMOVED
(bootloader) imei: REMOVED
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4309mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-21fde4b846
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Guidance would be much appreciated....
Thanks
Reece
ReeceT82 said:
Hello,
I am having all sorts of issues installing a different RUU. I use to have a O2 version of the RUU, I changed this to the Google Edition by unlocking, S-OFF, changing the MID and CID and then flashed the RUU.
I now would like to install a different RUU such as Android Revolution but I keep getting the 24 android.txt error. I have tried to change the MID and CID to a WWE version but to no avail.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.14.1700.15
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: REMOVED
(bootloader) imei: REMOVED
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4309mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-21fde4b846
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Guidance would be much appreciated....
Thanks
Reece
Click to expand...
Click to collapse
you have s-off I would be very careful messing around ..you can brick the phone.
Also if you have a decrypted RUU you can edit the android-info.txt to match your MID and CID
it's much safer
what instructions are you using to change the MID back ?
try this > http://forum.xda-developers.com/showthread.php?t=2535365
Changing CID is simple
fastboot oem writecid 11111111
for Superuser
or fastboot oem writecid HTC__001
are examples
2495823967
clsA said:
you have s-off I would be very careful messing around ..you can brick the phone.
Also if you have a decrypted RUU you can edit the android-info.txt to match your MID and CID
it's much safer
what instructions are you using to change the MID back ?
try this > http://forum.xda-developers.com/showthread.php?t=2535365
Changing CID is simple
fastboot oem writecid 11111111
for Superuser
or fastboot oem writecid HTC__001
are examples
Click to expand...
Click to collapse
Sorry for the slow reply. How do you decrypt the RUU to either edit the android.txt or find out what MID and CID I need?
ReeceT82 said:
Sorry for the slow reply. How do you decrypt the RUU to either edit the android.txt or find out what MID and CID I need?
Click to expand...
Click to collapse
Stop messing with your phone unless you wanna do the research required.
Sent from my HTC One using Tapatalk
xcrazydx said:
Stop messing with your phone unless you wanna do the research required.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Thanks for your 'useful' bit of advice, however I was under the impression that the forums were to be used to help people not to provide useless comments. You may be an ace on all of this but some people are still learning.
It is clear that I have done an amount of research as I have the GE running, and I don't mind doing more if I am pointed in the right direction.
ReeceT82 said:
Sorry for the slow reply. How do you decrypt the RUU to either edit the android.txt or find out what MID and CID I need?
Click to expand...
Click to collapse
just use one of these decrypted ruu.zip http://www.htc1guru.com/downloads/ruu-zip-downloads/ and open the zip file and edit the android-info.txt to match cid and mid of your phone

[Q] Htc One M7 (Black) Stuck on Logo Hang! S-on

Last Two Days ago I took from customer Htc one m7 logo hang htc condition.
Phone goes to Recovery Mode I make it Wipe But phone still same problem.it was 1.55 hboot.then i try flash phone with RUU but its give me error 155 During Flashing time.Then i make Ressurect it with riffbox after there hboot 1.44 also change CID I make it Super cid1111111.
But at this moments I cant flash this phone with RUU,ZIP.
I try also adb tool flashing. but same nothing happened to me.
I must sure it need to s-off but i cant make it s-off bcoz phone is still logo hang.
Plz anyone hale me.
Code:
ot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.00.000.00
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT358W9xxxx
(bootloader) imei: 354xxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4326mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.076s
i have same problem too. can somebody help
akkay said:
i have same problem too. can somebody help
Click to expand...
Click to collapse
Please state exactly what is your problem and how you got in the predictament. Also, post a fastboot getvar all and remove the imei and serial number of your device. Your phone is probably different than the previous persons phone.
facebook.com said:
Last Two Days ago I took from customer Htc one m7 logo hang htc condition.
Phone goes to Recovery Mode I make it Wipe But phone still same problem.it was 1.55 hboot.then i try flash phone with RUU but its give me error 155 During Flashing time.Then i make Ressurect it with riffbox after there hboot 1.44 also change CID I make it Super cid1111111.
But at this moments I cant flash this phone with RUU,ZIP.
I try also adb tool flashing. but same nothing happened to me.
I must sure it need to s-off but i cant make it s-off bcoz phone is still logo hang.
Plz anyone hale me.
Code:
ot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.00.000.00
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT358W9xxxx
(bootloader) imei: 354xxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4326mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.076s
Click to expand...
Click to collapse
As for yours, your version-main is all messed up, probably caused by the riffbox, but there was no need to do that, the 155 error you got was just a bad download, try and download this ruu and run it, otherwise, get the firmware for it and flash that first, im basing this info on the radio (baseband) which matches this ruu.
you will need to change the CID to HTC__001 or add superCID to the android-info.txt file before running
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Firmware only: http://d-h.st/XFf

Variant system version

Hi All
I had my M7 HTC One rooted with s-off running a GPE from mike1976 and all was good with the world.
I'm getting a new phone so am passing this to my mum and decided it would be better for her with everything stock so that she can get updates.
Anyway, I am having huge issues. The phone is back to stock running 4.3 but I cannot run the update as I get the variant system version issue.
I used a Guru Reset rom for the M7, although I can't remember exactly which one. However, I made sure it was for the correct CID and MID.
Getvar gives me this:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35FW9*****
(bootloader) imei: 354436052******
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: htc__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4287mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
I can see the it's not showing any information for version-main. Any ideas why this would be?
Can anyone offer any advice on how I can try to resolved this?
Many thanks
Lomax01 said:
Hi All
I had my M7 HTC One rooted with s-off running a GPE from mike1976 and all was good with the world.
I'm getting a new phone so am passing this to my mum and decided it would be better for her with everything stock so that she can get updates.
Anyway, I am having huge issues. The phone is back to stock running 4.3 but I cannot run the update as I get the variant system version issue.
I used a Guru Reset rom for the M7, although I can't remember exactly which one. However, I made sure it was for the correct CID and MID.
Getvar gives me this:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35FW9*****
(bootloader) imei: 354436052******
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: htc__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4287mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
I can see the it's not showing any information for version-main. Any ideas why this would be?
Can anyone offer any advice on how I can try to resolved this?
Many thanks
Click to expand...
Click to collapse
Variant version error is caused by a mismatch between the OS version and the MID, you'll have to s-off the phone again and change the MID to match the OS or change the OS to match the MID.
What is the OS version?
edit:
And your CID is incorrect, it should be HTC__001 not htc__001
Thanks, I'll change the CID.
The OS is 3.62.401.1.
Lomax01 said:
Thanks, I'll change the CID.
The OS is 3.62.401.1.
Click to expand...
Click to collapse
OS is 3.62.401.1 but bootloader is 1.44 which means your OS and your firmware version doesn't match together.
Are you sure you have flashed the .401 version that is made for PN0710000 and not that one for PN0711000?
What method did you used to get back to stock? It looks like your phone is not really stock... Your hboot should be 1.55 on that version.
I think you should s-off the phone again, and run a full ruu (1.28.401.7) with PN0710000 and HTC__001
then you'll be able to apply ota updates from 1.28.401.7 to 6.09.401.5
Really appreciate your help. I'll try it when i get home.

Solved: Completely lost with flashing m7 back to stock.

Hello all!
I'm an M7 user for almost 2 years and today I bought a used one for my girlfriend.
It came with the Viper one 7.01 rom.
This is way to complicated for my girlfriend and misses some standard stuff that she wants (can't even find the play store on it).
So I decided to get it back to a stock HTC version with Sense 5.5 (and update to 6.0).
I've now been busy a whole night, but I can't seem to get it to work. When using the RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1.exe file, it comes up with an 158 error. And when I try to flash it with fastboot and the Guru_Reset_M7_2.24.401.8.zip file, it gives me error: FAILED (remote: 24 parsing android-info fail)
I also tried with a Vodafone file (Guru_Reset_M7_2.24.161.1.zip), because the Phone came with a Vodafone bill. But this didn't work either...
I've managed to get it S-OFF with rumrunner and tried it Locked and unLocked. The tampered line is gone.
Here's the getvar all text:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: **************
(bootloader) imei: *****************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4298mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
I really have no idea what I should do next.
I just want this Phone to have the latest stock HTC one rom with sense 6.0, nothing more (and preferably future ota updates, if this is even possible).
But untill now I just can't flash any other rom.
I'm probably missing something and really hope one of you have the answer.
Gonna get some sleep now and try more tomorrow...
PIR3lly said:
Hello all!
I'm an M7 user for almost 2 years and today I bought a used one for my girlfriend.
It came with the Viper one 7.01 rom.
This is way to complicated for my girlfriend and misses some standard stuff that she wants (can't even find the play store on it).
So I decided to get it back to a stock HTC version with Sense 5.5 (and update to 6.0).
I've now been busy a whole night, but I can't seem to get it to work. When using the RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1.exe file, it comes up with an 158 error. And when I try to flash it with fastboot and the Guru_Reset_M7_2.24.401.8.zip file, it gives me error: FAILED (remote: 24 parsing android-info fail)
I also tried with a Vodafone file (Guru_Reset_M7_2.24.161.1.zip), because the Phone came with a Vodafone bill. But this didn't work either...
I've managed to get it S-OFF and tried it Locked and unLocked. The tampered line is gone.
Here's the getvar all text:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: **************
(bootloader) imei: *****************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4298mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
I really have no idea what I should do next.
I just want this Phone to have the latest stock HTC one rom with sense 6.0, nothing more (and preferably future ota updates, if this is even possible).
But untill now I just can't flash any other rom.
I'm probably missing something and really hope one of you have the answer.
Gonna get some sleep now and try more tomorrow...
Click to expand...
Click to collapse
flash the 4.19.401.9 firmware first then flash the ruu. Its a well known issue of 4.xx.xxx.x RUUs, you have to flash the firmware first.
also check your MD5 to make sure your ruu isn't corrupted.
Thanks for your quick reply.
I flashed the firmware, it's now got the dark boot bootloader with firmware 4.19.401.9. But I still can't flash the ruu (exe file with correct md5). Comes back with an error 150.
Phone still boots up normally into Viper One 7.0.1
Also tried a different file download, didn't work.
Tried different computer, didn't work.
I'm gonna try some more stuff, but any help would be appreciated.
New getvar:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ************
(bootloader) imei: *************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4294mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d4c562c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s
EDIT:
Well, I just managed to update with the RUU Zip M7_UL_JB_50_HTC_Europe_1.29.401.16_R_Radio_4A.14.3250.13_10.33.1150.01_release_318486_signed_2_4_decrypted.zip" file.
Now to see if I can get it to update to the latest version...
EDIT 2:
SUCCES!!! It installed the ruu fine (with bootloader locked) and it's now updating ota!!! :laugh:
Thanks for the help...
PIR3lly said:
Thanks for your quick reply.
I flashed the firmware, it's now got the dark boot bootloader with firmware 4.19.401.9.
Click to expand...
Click to collapse
Why? You must flash the firmware that come with the RUU, not a modded firmware with the black bootloader...
SUCCES!!! It installed the ruu fine (with bootloader locked) and it's now updating ota!!! :laugh:
Thanks for the help...
Click to expand...
Click to collapse
With s-off you don't need to relock the bootloader to flash a RUU. Anyway glad to know that your problem is solved.
Well, I'm not that advanced with flashing and modding bootloaders, firmware and ruu's...
So I searched on the 4.19.401.9 firmware you told me to install and the only one I found was that one with the black bootloader. That's why I used it
Are you saying that if I would have flashed it with the firmware that came with the ruu, it might have worked right away?
But I only had the exe ruu file, so would that mean I had to extract the firmware from it, or download the zip somewhere?
As for locking the bootloader... I understood that if I want to get official HTC ota updates, that it has to be locked. Could have misunderstood, but at least it works great now and my girlfriend is happy as ever.

Categories

Resources