Please i need help, i hard bricked my z1 c6903 ,restoring a backup with unlocked bootloader , this time the pone is totally dead. When in plugg in it blinks a red light.Im reading all about this and im a bit confused ,can anyone help me please?I really appreciate if u can.Best regards
SANTUMIL said:
Please i need help, i hard bricked my z1 c6903 ,restoring a backup with unlocked bootloader , this time the pone is totally dead. When in plugg in it blinks a red light.Im reading all about this and im a bit confused ,can anyone help me please?I really appreciate if u can.Best regards
Click to expand...
Click to collapse
Charge it for good 1-2 hours then flash stock firmware using flashtool..
kathanpatel1001 said:
Charge it for good 1-2 hours then flash stock firmware using flashtool..
Click to expand...
Click to collapse
Flashtools ,dont recognize my phone,it oly blinks red light when its charging
SANTUMIL said:
Flashtools ,dont recognize my phone,it oly blinks red light when its charging
Click to expand...
Click to collapse
Its most likely to be bad usb cable and or drivers..keep it on charger and use different usb cable also install drivers properly windows 8+ requires additional steps in driver installation google it..
kathanpatel1001 said:
Its most likely to be bad usb cable and or drivers..keep it on charger and use different usb cable also install drivers properly windows 8+ requires additional steps in driver installation google it..
Click to expand...
Click to collapse
Im on win7 64x,everything was ok after restore a rom from twrp,drivers was sucefully installed ,and after this brick i was able to use flashtools ,so.. i think usb cable and drivers are OK. When i plug it to wall or usb ,only blinks a red light ,i tryed several keys combinations and nothing happens.
SANTUMIL said:
Im on win7 64x,everything was ok after restore a rom from twrp,drivers was sucefully installed ,and after this brick i was able to use flashtools ,so.. i think usb cable and drivers are OK. When i plug it to wall or usb ,only blinks a red light ,i tryed several keys combinations and nothing happens.
Click to expand...
Click to collapse
plug it into the wall and leave it on charge overnight, don't touch it. Try connecting in the morning, should work.
AnrgKrshn said:
plug it into the wall and leave it on charge overnight, don't touch it. Try connecting in the morning, should work.
Click to expand...
Click to collapse
Thxs but the phone is dead,nothing that i search it works.:crying::crying: And btw i got bricked so many times on LB and always i could flash it again,this issue im surely it was for being ULB
SANTUMIL said:
Thxs but the phone is dead,nothing that i search it works.:crying::crying: And btw i got bricked so many times on LB and always i could flash it again,this issue im surely it was for being ULB
Click to expand...
Click to collapse
UB is usually easier to recover cause you can fastboot any custom kernel to recover the phone.
---------- Post added at 04:44 PM ---------- Previous post was at 04:36 PM ----------
http://forum.xda-developers.com/showthread.php?t=2574764
AnrgKrshn said:
UB is usually easier to recover cause you can fastboot any custom kernel to recover the phone.
---------- Post added at 04:44 PM ---------- Previous post was at 04:36 PM ----------
http://forum.xda-developers.com/showthread.php?t=2574764
Click to expand...
Click to collapse
Same issue with mine, tried all and nothing worked. Finally gave it to sony center and told that while upgrading to LP this happened. They replaced pcb , back panel etc and gave an almost new phone for free bcoz it was in warranty.
Related
As the title says guys, i cant put my x8 to flashmode ... when Im pressing the back button , and im pluging in my phone to computer , the Green flashmode diod its not appearing ... a also cant connect my x8 to computer even though i installed latest PCC. Yes i did full wipe and also install another ROM but it doesnot help Really guys please help me with my problem because im running out of ideas what to do ..
Did You install drivers from Flashtool folder?
And - does Your x8 recognize the charger? Cause maybe USB port is damaged.
i did install Gordon's Gate..
Well when i plug in the cable my x8 is charging ..
i also tried to connect my brother x8 to the computer but the same thing happens , i cant enter flashmode and i cant see my sdcard ..
oh yea i forgot to add that the same cable its working on my other computer but not working on this one ;(
You have to keep the back button pressed and then plug the usb cable, and release the button when green light appears...
Maybe this helps!
sidkota said:
You have to keep the back button pressed and then plug the usb cable, and release the button when green light appears...
Maybe this helps!
Click to expand...
Click to collapse
yes thats exactlly what im doing , yesterday it was working perfectly but now it does not . But the key is that the green light its not appearing.I don't know what is the cause of that.
Sounds like something terrible!
Can't the x8 be flashed while in recovery mode? Once this happened to my tab, it wasn't going to flash mode, luckily it flashed in recovery(cwm) mode also!
sidkota said:
Sounds like something terrible!
Can't the x8 be flashed while in recovery mode? Once this happened to my tab, it wasn't going to flash mode, luckily it flashed in recovery(cwm) mode also!
Click to expand...
Click to collapse
OK thanks i will try this one thanks you know now i just want to flash to stock so i can see if the connection with computer will work or not
EDIT: its not working unfortunately
Did You try to reset Your PC? On my PC sometimes USB ports doesn't work, but after rebooting computer everything is working
Bolussimo said:
Did You try to reset Your PC? On my PC sometimes USB ports doesn't work, but after rebooting computer everything is working
Click to expand...
Click to collapse
i did 3 times
proadi96 said:
OK thanks i will try this one thanks you know now i just want to flash to stock so i can see if the connection with computer will work or not
EDIT: its not working unfortunately
Click to expand...
Click to collapse
try bootloader mode also!
---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------
and as u mentioned earliep that it is working on your other pc, try deleting the drivers and the device too, from the device manager, use the show hidden devices option, find ur x8, and delete the drivers! Then try again!
sidkota said:
try bootloader mode also!
---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------
and as u mentioned earliep that it is working on your other pc, try deleting the drivers and the device too, from the device manager, use the show hidden devices option, find ur x8, and delete the drivers! Then try again!
Click to expand...
Click to collapse
OK i tried to look for the drivers but as far as i can see they are not there.Hey does PCC still installs the drivers automatically? because some time ago i remember it was , it was actually saying ''installing drivers'' or something like this , but now i downloaded the newest version and there is only install bar , not any other as it was in previous versions ... maybe thats the cause that i dont have proper drivers?
I have this problem too week ago. I tried to connect and disconnect the usb. Didnt work. When i checked again, usb port on my computer didnt mount my usb cable correctly.
thanks for the thanks......
Sent by my sexy orange W8 using XDA app...................
Thats actually what i do step-by-step :
1.Plug in cable to my computer
2.Then Plug in cable to my phone
3.In this moment there should pop up notification that says that the phone is connected with computer , and it asks if you want to share sd card or something like this
4.But unfortunately id does not pop up and my computer does not recognize the phone
5.Help...
proadi96 said:
Thats actually what i do step-by-step :
1.Plug in cable to my computer
2.Then Plug in cable to my phone
3.In this moment there should pop up notification that says that the phone is connected with computer , and it asks if you want to share sd card or something like this
4.But unfortunately id does not pop up and my computer does not recognize the phone
5.Help...
Click to expand...
Click to collapse
Hi proadi, try to remove all drivers of USB remembered devices using USB-View, and then, plug it again and see what happens.
The program is attached on the msg.
PS: Remove all the remembered drivers instead of only the SEMC or such thing
Cheers,
b1s
Pull out all usb connect to pc, uninstall all usb port driver , from system manager, restart pc. plug in you phone.
Sent from my thumb using my eyes
biscoitu said:
Hi proadi, try to remove all drivers of USB remembered devices using USB-View, and then, plug it again and see what happens.
The program is attached on the msg.
PS: Remove all the remembered drivers instead of only the SEMC or such thing
Cheers,
b1s
Click to expand...
Click to collapse
everything is falling apart because it stopped working even on my laptop ;/ I removed all the drivers by the program you provided , Now i will restart my PC and see if its working or not
and PS. I dont have original cable for my x8 ! But it was working and now its not ..
Hi i have Xperia T which was fully working and my friend tries to make downgrade with Flashtool... i don't know exacly what he has done i'm trying to get it back alive but Setool didn't recognise the phone original update program also when i connect it to USB it is recognised by pc as Zeus Flash device on other computer as qualcoomm device any idea how i can unbrick it? i have to add pc recognise the phone without pushing any button with volume down or up is the same it is recognised also when i disconnect the battery when i tries to power it up nothing happens please help!!
biegan said:
Hi i have Xperia T which was fully working and my friend tries to make downgrade with Flashtool... i don't know exacly what he has done i'm trying to get it back alive but Setool didn't recognise the phone original update program also when i connect it to USB it is recognised by pc as Zeus Flash device on other computer as qualcoomm device any idea how i can unbrick it? i have to add pc recognise the phone without pushing any button with volume down or up is the same it is recognised also when i disconnect the battery when i tries to power it up nothing happens please help!!
Click to expand...
Click to collapse
calm down. Follow the instrctions in the third thread in the general section about how to recover froma soft brick. Its here
Follow those instructions and post here if you have any problems. Preferably with screen shots of what your PC/Phone is doing.
gregbradley said:
calm down. Follow the instrctions in the third thread in the general section about how to recover froma soft brick. Its here
Follow those instructions and post here if you have any problems. Preferably with screen shots of what your PC/Phone is doing.
Click to expand...
Click to collapse
I will describe what programs showing because i have polish version and maybe you can't understand them:
When i'm trying to connect to pc companion when pc recognise phone i'm geting message PC companion could not connect with device disconnect device and try again
When trying do sof/hard reset nothing happens
When trying to pull in fastboot or flash mode pc recognise phone always the same in conrtol panel ZEUS FLASH device pc also recognise in thisa mode without battery and without pushing any buttons but i'm not geting any led Green or blue only when i'm conecting charger or usb cable WITHOUT battery it blinks red ones
When i'm trying to flash with flashtool or original update service when program is on screen asking me to connect the device i plug usb pc recognising the phone (usb connected device sound) but program doesn't start to flash or even recognise
i have also setool when i'm trying to flash by setool when program is waiting for device connecting bar is moving on down side of window when i connect the phone it is stoping like it tries to connect but nothing happens....
i was thinking to try this but i have cheked battery voltage and it is 3,88 so i thing it is fully charged:
Here are the steps I took successfully revise my phone from soft brick.
Let the phone charge (long long time = 4+ hrs) on wall charger.
Red light on (constantly - not flashing) - charge until red light off (again very long time =16+ hrs)
Unplug from wall
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
While hold volumn down and plug in USB
Red light will be back on, after a few seconds - flash will run.
Unplug USB then power on - phone will boot and die (it's okay don't worry)
Charge the phone again - after a while (or let it charge full), you can now turn on the phone.
That is all ... Back and running.
GOOD Luck.
Timing = could be different from phone to phone - depends on battery of the phone before it dead.
please do you have any idea? for me it hangs in some kind of boot mode and i don't know how to kick it fromthis and reflash if any screens can help please tell me i will do them
biegan said:
I will describe what programs showing because i have polish version and maybe you can't understand them:
When i'm trying to connect to pc companion when pc recognise phone i'm geting message PC companion could not connect with device disconnect device and try again
When trying do sof/hard reset nothing happens
When trying to pull in fastboot or flash mode pc recognise phone always the same in conrtol panel ZEUS FLASH device pc also recognise in thisa mode without battery and without pushing any buttons but i'm not geting any led Green or blue only when i'm conecting charger or usb cable WITHOUT battery it blinks red ones
When i'm trying to flash with flashtool or original update service when program is on screen asking me to connect the device i plug usb pc recognising the phone (usb connected device sound) but program doesn't start to flash or even recognise
i have also setool when i'm trying to flash by setool when program is waiting for device connecting bar is moving on down side of window when i connect the phone it is stoping like it tries to connect but nothing happens....
i was thinking to try this but i have cheked battery voltage and it is 3,88 so i thing it is fully charged:
Here are the steps I took successfully revise my phone from soft brick.
Let the phone charge (long long time = 4+ hrs) on wall charger.
Red light on (constantly - not flashing) - charge until red light off (again very long time =16+ hrs)
Unplug from wall
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
While hold volumn down and plug in USB
Red light will be back on, after a few seconds - flash will run.
Unplug USB then power on - phone will boot and die (it's okay don't worry)
Charge the phone again - after a while (or let it charge full), you can now turn on the phone.
That is all ... Back and running.
GOOD Luck.
Timing = could be different from phone to phone - depends on battery of the phone before it dead.
please do you have any idea? for me it hangs in some kind of boot mode and i don't know how to kick it fromthis and reflash if any screens can help please tell me i will do them
Click to expand...
Click to collapse
I want to add when i'm trying to connect for example SE ARC it is recognised as SEMC Flash Device and all programs recognising it
biegan said:
I want to add when i'm trying to connect for example SE ARC it is recognised as SEMC Flash Device and all programs recognising it
Click to expand...
Click to collapse
I forgot to add when i'm doing test point to unlock for example ARC it is also recognised as ZEUS Flash so i thing it stays in some king of boot mode but there is no information in the net how to kick it out or even do jtag because i can doit also but i think it is not supported yet
You have an xperia T, then how can you connect the phone to the PC WITHOUT a battery? It is not removable in the Xperia T!
Have you flashed anything to the device before this happened?
EDIT
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
Click to expand...
Click to collapse
Which firmware is .111? I dont beleive there has ever been a .111 firmware for the T? Can you give me the post you found that in and the download link, thanks
gregbradley said:
You have an xperia T, then how can you connect the phone to the PC WITHOUT a battery? It is not removable in the Xperia T!
Have you flashed anything to the device before this happened?
EDIT
Which firmware is .111? I dont beleive there has ever been a .111 firmware for the T? Can you give me the post you found that in and the download link, thanks
Click to expand...
Click to collapse
i disassemble the back cover it's very simple the battery connector is on the flex cable i know what i'm talking if you want i can send pics i'am using flashifile LT30p_7.0.A.1.303_CH the most important think that no program is detecting the phone only pc recognising the phone
biegan said:
i disassemble the back cover it's very simple the battery connector is on the flex cable i know what i'm talking if you want i can send pics i'am using flashifile LT30p_7.0.A.1.303_CH the most important think that no program is detecting the phone only pc recognising the phone
Click to expand...
Click to collapse
OK,
Yes thats true but it sounds similar to a problem I have come across before. But this happened when someone flashed the S1 update on the TX instead of the T.
Have you unistalled evrything android/sdk/adb related from your computer and started again.
Also, you can try another machine.
Are you on win8? That has issues with drivers from Sony.
gregbradley said:
OK,
Yes thats true but it sounds similar to a problem I have come across before. But this happened when someone flashed the S1 update on the TX instead of the T.
Have you unistalled evrything android/sdk/adb related from your computer and started again.
Also, you can try another machine.
Are you on win8? That has issues with drivers from Sony.
Click to expand...
Click to collapse
Hi no i didn't try i always use XP for software problems with phones i don't knoiw exacly what he did with the phone you think when i try to do it on clean system should help? i tried on 2 computers and problem is the same i think to general problem is that computer recognising the phone like a ZEUS FLash not SEMC Flash device i think somehow he erase whole flash or write from other model and now i can't do anythink
biegan said:
Hi no i didn't try i always use XP for software problems with phones i don't knoiw exacly what he did with the phone you think when i try to do it on clean system should help? i tried on 2 computers and problem is the same i think to general problem is that computer recognising the phone like a ZEUS FLash not SEMC Flash device i think somehow he erase whole flash or write from other model and now i can't do anythink
Click to expand...
Click to collapse
Yes, it sounds like your friend has done something silly to the phone. Untill we know exactly what he did, and what he tried to flash we are just guessing...
gregbradley said:
Yes, it sounds like your friend has done something silly to the phone. Untill we know exactly what he did, and what he tried to flash we are just guessing...
Click to expand...
Click to collapse
All i know he told me he tries to downgrade the phone to make a root and he was using flashtool is there any other methods/programs which can flash lt30p? i have all service boxes like riff box setool but riff don't make it setool can't start flashing i don't know any testpoint or jtag?
biegan said:
All i know he told me he tries to downgrade the phone to make a root and he was using flashtool is there any other methods/programs which can flash lt30p? i have all service boxes like riff box setool but riff don't make it setool can't start flashing i don't know any testpoint or jtag?
Click to expand...
Click to collapse
I dont know where testpoint is on xperia T as we have never been down that road here.
Has he tried to use EMMA to flash something? That is meant only for unlocked bootloaders, maybe he has messed up with that, but I am onl guessing here and i cant really see why that would do anything to the boot...
Maybe he tried to flash it, dropped it, broke it, and thinks a software hack can help him....
gregbradley said:
I dont know where testpoint is on xperia T as we have never been down that road here.
Has he tried to use EMMA to flash something? That is meant only for unlocked bootloaders, maybe he has messed up with that, but I am onl guessing here and i cant really see why that would do anything to the boot...
Maybe he tried to flash it, dropped it, broke it, and thinks a software hack can help him....
Click to expand...
Click to collapse
No it is 100% software problem he is noob in this and all he told me he trried to root the phone but first he tried to downgrade it with flashtool but if flashtool doens't recognise the phone setool also do you think there is any other option?
biegan said:
No it is 100% software problem he is noob in this and all he told me he trried to root the phone but first he tried to downgrade it with flashtool but if flashtool doens't recognise the phone setool also do you think there is any other option?
Click to expand...
Click to collapse
Not that I know of. Bin4ry is someone who has experience with setool and may be able to help. Try PM'ing him.
Sorry I couldnt be of much more use.
gregbradley said:
Not that I know of. Bin4ry is someone who has experience with setool and may be able to help. Try PM'ing him.
Sorry I couldnt be of much more use.
Click to expand...
Click to collapse
Thanks bro anyway for your help!!
any update about your device...
i have exactly same problem as you mentioned but my device is Xperia V (LT25i)....
waiting for your reply. please do update.
I also had the same problem, my cell phone xperia v. .. please help me .... What can I do now?
bambox said:
I also had the same problem, my cell phone xperia v. .. please help me .... What can I do now?
Click to expand...
Click to collapse
what have you already done to try and fix it?
What did you do to make it not work?
What are the symptoms of your phone?
gregbradley said:
what have you already done to try and fix it?
What did you do to make it not work?
What are the symptoms of your phone?
Click to expand...
Click to collapse
a week ago I upgraded to 4.1.2, and using kernel vKernel_Xperia_V_1.2.5
after 1 week of use, I reboot my xperia v, but do not want to live anymore, Charging not respont, could not power on, flsahmode and fasbootmode.
my xperia v die, but still 70% battery.
on my pc not detect (only ZEUS FLASH DEVICE)
bambox said:
a week ago I upgraded to 4.1.2, and using kernel vKernel_Xperia_V_1.2.5
after 1 week of use, I reboot my xperia v, but do not want to live anymore, Charging not respont, could not power on, flsahmode and fasbootmode.
my xperia v die, but still 70% battery.
on my pc not detect (only ZEUS FLASH DEVICE)
Click to expand...
Click to collapse
put it on charge for 24 hours and leave it alone.
after the 24 hours turn it on.
Hey guys, sorry if I write bad.
I tried to flash my x8 for put in the rom GingerDX v31b. Anyways... I think my USB cable was broken or something, when I tried to flash baseband 015, it was flashed but then I power on my phone and... Boom! That image appeared: a triangle with a exclamation sign and a phone .
It reboots again and again, my computer doesn't recognize the phone. I need help guys. Sorry for bad writing.
On the other hand.. I have my phone with unlocked bootloader, and I installed so much roms. Any question? sorry if I forgot something. Thank you guys and sorry again if I put the thread in the wrong place.
Francisco Fávaro.
hmm you are sure that flashtool doesnt recognize it?
if you cant use flashtool then go to recovery
i hope this is going to solve he problem
send from xperia x8
little help
Hi,
I've tried to flash my xperia x8 with flashtool but after the flashing, my phone turn off and it won't turn on or connect to the pc. Is it broken for good or there is still hope
noki severgun said:
Hi,
I've tried to flash my xperia x8 with flashtool but after the flashing, my phone turn off and it won't turn on or connect to the pc. Is it broken for good or there is still hope
Click to expand...
Click to collapse
Look under your battery inside the phone. There is a number like 10W34 or 11W10
What is your number?
1.turn of the device
2.open pc companion
3.click support zone
4.click update without connected phone
5.It will ask you about repair(something like that..)
6.click yes
7.wait the program to prepare the pc
8.chose the x8 from devices list
9.wait until download the rom
10.plug the device when the program say to..
CtrlAltDelIrl said:
Look under your battery inside the phone. There is a number like 10W34 or 11W10
What is your number?
Click to expand...
Click to collapse
it is 11w16
Wait...why do you think it's something about bootlader???
just connect to flashtool and recover or if can't be recognized then try with PC Companion else reinstall rom or restore backup with recovery
---------- Post added at 03:44 PM ---------- Previous post was at 03:31 PM ----------
noki severgun said:
Hi,
I've tried to flash my xperia x8 with flashtool but after the flashing, my phone turn off and it won't turn on or connect to the pc. Is it broken for good or there is still hope
Click to expand...
Click to collapse
Ok you flash something but WHAT?
All i know that you have 11W16 and you can't hard brick that(unless you are really..... )
Anyway let's help you out
First of all,how many % did your battery have before flashing?
If under 10% then try to connect the charger
if it done't help keep reading
What did you do with flashtool--->FLASHING or UNLOCKING BOOTLOADER?
If FLASHING: What did you flash,please write down name of file
If UNLOCKING BOOTLOADER:
Try to turn on you phone--->If it won't turn on---->try to connect it to PC in flashmode so FLASHTOOL can recognize it
If FLASHTOOL can't recognize it try with PCC.....if that doesn't work either see does your phone have any Signs of life
If you'r phone is completly dead(no sign of life) than it's probably a HARD BRICK
I hope i helped :good:
big THANKS
8cpaiw said:
Wait...why do you think it's something about bootlader???
just connect to flashtool and recover or if can't be recognized then try with PC Companion else reinstall rom or restore backup with recovery
---------- Post added at 03:44 PM ---------- Previous post was at 03:31 PM ----------
Ok you flash something but WHAT?
All i know that you have 11W16 and you can't hard brick that(unless you are really..... )
Anyway let's help you out
First of all,how many % did your battery have before flashing?
If under 10% then try to connect the charger
if it done't help keep reading
What did you do with flashtool--->FLASHING or UNLOCKING BOOTLOADER?
If FLASHING: What did you flash,please write down name of file
If UNLOCKING BOOTLOADER:
Try to turn on you phone--->If it won't turn on---->try to connect it to PC in flashmode so FLASHTOOL can recognize it
If FLASHTOOL can't recognize it try with PCC.....if that doesn't work either see does your phone have any Signs of life
If you'r phone is completly dead(no sign of life) than it's probably a HARD BRICK
I hope i helped :good:
Click to expand...
Click to collapse
First of all THANKS A LOT for your effort, I mean: really THANKS!!!
So let me tell you a story
It was my forth x8 phone that I've tried to install CM9 on and previously it went very well but yesterday I've did it in a hurry and forget to change the flash file on the flash tool and when I click on the magic button with the flash sign I've realized that the x8 was flashed with x10 firmware the default firmware on the flashtool program (really stupid mistake ). After that the phone turn off and went on haven.
After I cold my head and start to search for new x8 (to replace the broken one) I've realized that the phone has 24 month warranty and the first thing that I did this morning was to return the phone to the shop that was bot from.
I hope that some of you out there had 5 min lol session from my experience in the story, and please, If somebody else thinks that he knows how to do it without reading the manual - this are the consequences!!!
The only way to bring this phone alive is with riff jtag box that I didn't have.
P.S. **** happens
Yes a few people from forum flashed wrong firmware and got hard bricked....amm it's hard brick so they will replace your motherboard
I am glad to help
my z1 doesn't boot or charging
this happened after flashing a custom rom
can i recover it ??
what should i find a replacment for the motherboard ?
sorry for my bad english
hope to find any one to help
Steliyos said:
my z1 doesn't boot or charging
this happened after flashing a custom rom
can i recover it ??
what should i find a replacment for the motherboard ?
sorry for my bad english
hope to find any one to help
Click to expand...
Click to collapse
post stat of your phone -->
1. flashmode & fastboot working?
2. LED when power key is pressed?
3. what rom you flashed?
DectonX said:
post stat of your phone -->
1. flashmode & fastboot working?
2. LED when power key is pressed?
3. what rom you flashed?
Click to expand...
Click to collapse
none of them is working
led isn't working too
DU10.5
yes you can fix your hard brik xperia z1
Steliyos said:
my z1 doesn't boot or charging
this happened after flashing a custom rom
can i recover it ??
what should i find a replacment for the motherboard ?
sorry for my bad english
hope to find any one to help
Click to expand...
Click to collapse
i was facing the same problem with my z1 c6902
only red led while charging
no sony logo
no fastboot mode
pc recognize it in flash mode
how i solved it?
i used xperia companion,
connect your z1 with pc
select repair software
follow the instructions you'll get yur z1 unbricked
vjluvanee said:
i was facing the same problem with my z1 c6902
only red led while charging
no sony logo
no fastboot mode
pc recognize it in flash mode
how i solved it?
i used xperia companion,
connect your z1 with pc
select repair software
follow the instructions you'll get yur z1 unbricked
Click to expand...
Click to collapse
ok the device is seen by the computer but it doesn't boot to download mode
when i connect it shows that there is a device connected to the computer but it's shown as it's a usb input device
can u help me with this?
Have you installed drivers!
---------- Post added at 08:42 PM ---------- Previous post was at 08:40 PM ----------
Steliyos said:
ok the device is seen by the computer but it doesn't boot to download mode
when i connect it shows that there is a device connected to the computer but it's shown as it's a usb input device
can u help me with this?
Click to expand...
Click to collapse
Drivers are installed?
Which os u r using?
vjluvanee said:
Have you installed drivers!
---------- Post added at 08:42 PM ---------- Previous post was at 08:40 PM ----------
Drivers are installed?
Which os u r using?
Click to expand...
Click to collapse
yes of course it's
windows 10 -64 bit
If PC recognizes your phone, can you use that to boot into fastboot mode?
Either use adb command "adb reboot fastboot" in PC
Or press and hold VOLUME_UP button then connect your phone to PC via USB (should see blue LED)
Your device is corrupt It can't be trusted and will not boot please help
Sony Xperia 1 mark 2
Do a software repair using Xperia Companion on a computer. Alternatively, you can do a full wipe using Flashtool or newflasher.
Whe using xperia 1 i have this problem.this happen because flash using bad cable
Thanks So much it worked
iArvee said:
Do a software repair using Xperia Companion on a computer. Alternatively, you can do a full wipe using Flashtool or newflasher.
Click to expand...
Click to collapse
i Used new-flasher to flash firmware instead , because i was on low battery couldn't use Sony Xperia companion.
sony1xps said:
Your device is corrupt It can't be trusted and will not boot please help
Sony Xperia 1 mark 2
Click to expand...
Click to collapse
we need some more information to help you.
What did you do to cause this error?
In most cases you can recover from this error so don't panic.
Lennyuk said:
we need some more information to help you.
What did you do to cause this error?
Click to expand...
Click to collapse
Different from the OP, but I'm facing the same issue.... Trying to flash the XQ-AT51 firmware on XQ-AT52. Tried to use flashtool on one computer got a "bundle does not match connected device error". Tried a different computer using newflasher. First I followed some instructions involving removing the .ta files, flashed. That's when I first got the boot loop and corrupt screen. Then I downloaded the firmware again and left everything in the folder except "persist_X-FLASH-ALL-2389.sin" and got the same result.
Tried a different cable. Xperia Companion just says the device is locked. So does Emma. Just stuck. ?
Why don't you download XQ-AT52 Firmware instead of XQ-AT51 ,
and flash it using newflasher ?
Here is the guide for newflasher just to double check. w w w.xperiablog.net/2018/01/28/newflasher-guide-to-install-new-firmware-for-xperia-xz-premium-xz1-and-more/
UwUzzzz said:
Why don't you download XQ-AT52 Firmware instead of XQ-AT51
Click to expand...
Click to collapse
Because I'm trying to install the US version....
---------- Post added at 04:13 AM ---------- Previous post was at 03:47 AM ----------
Tried to reflash AT52.... Same thing.... I appear to be screwed.
oo-long said:
Because I'm trying to install the US version....
---------- Post added at 04:13 AM ---------- Previous post was at 03:47 AM ----------
Tried to reflash AT52.... Same thing.... I appear to be screwed.
Click to expand...
Click to collapse
Okay I was able to repair it using the Xperia Companion....
I didn't realized that I needed to start the repair before the phone was plugged in. ?
---------- Post added at 11:29 PM ---------- Previous post was at 10:44 PM ----------
And in case anyone else is in the same situation. I re-flash the device with the AT51 firmware and everything worked fine. I'm now using the US firmware on the international AT52 version of the device.
After the repair through Xperia Companion. I just re-ran the same thing as last time (with all the .ta files without the persist file) after setting up the device and turning on USB debugging again. However this time I didn't get a prompt halfway through about flashing the persist partition.
Now everything works on the US firmware. Not sure why. This is literally my fist Android device so I know very little about all this. Just glad to have a working phone again. ?
anyone can help me
i have the same problem...
Anybody figure out why Xperia Companion fails as shown in pic above? My battery is charged too so not sure why it says needs to charge battery in Xperia Companion.
I'm also getting that error message as shown above in post # 11 when trying to repair via the Xperia Companion. Any help would be great!
Me too, having the same problem with my Xperia 1 SOV-40.
I had the same problem with my Xperia 5 ii after I re-locked the bootloader using fastboot (fastboot oem lock).
I could fix the problem with Xperia Companion. Here is what I did [maybe labels are not exactly correct, my interface is in german]:
Pre-requisites:
I did not use the original Sony USB cable, but a third party cable from Anker, also worked
Disconnect device from computer
Steps to fix:
Install and start Xperia Companion
Click "software repair"
On the bottom click "My device is not detected or is a Smartwatch 3"
Choose your device, click "Xperia smartphone or tablet"
Follow steps on the screen:
Disconnect and power off device (should already be)
Press and hold volume down
Connect device via USB cable, still hold volume down, the notification LED will turn green
Repair starts
Wait about 10 to 20 minutes until repair is finished
Screen will stay black and notification LED will stay green during the whole procedure
After these steps, Xperia Companion showed a success message and my device turned off. I disconnected the cable and started it (press and hold power button for about 1 second). The device first only turned on the notification LED in green, screen stayed black. After about 5 to 10 seconds, the device turned off again. I started it again (press and hold power button for about 1 second) until it vibrates, and it started normally.
Of course the device was reset and all data was wiped. For me this was no problem, as I anyway resetted it before.
Hope that helps
blegs said:
Whe using xperia 1 i have this problem.this happen because flash using bad cable
Click to expand...
Click to collapse
A few hours ago I suffered this, the problem with cable! I tormented 10 hours to look for other solutions to put the "ROM", being the official version (emma flasher) does not work! But it didn't work because of the cable (it was a "Baseus" cable, it was ok, but I think it was too long, 3 meters: D .
sony1xps said:
Your device is corrupt It can't be trusted and will not boot please help
Sony Xperia 1 mark 2
Click to expand...
Click to collapse
i have same problem ..plz help me
i have same problem ..please help me