Related
There is a serious bug with the built in phone app , I was wondering whether any of you are suffering this.
When you dial a number manually and hit the arrow to delete one of the digits, the phone goes berzerk, starts dialing loads of 0pw00's and locks up.
Same happens when scrolling through the contacts on the phone app (not the standard contacts app) and tapping the forward hardkey to change from say a Mobile number to a Home number for the listed contact
Nop just tried it all is good.
Not experienced that problem, but i have experienced another problem in the phone app.
when you select a contact in the phone app, and push either left or right on the scroll wheel to select the next available number in the contact, i.e. business, home, mobile2, etc, it will just keep scrolling until you reset the phone. really annoying if you want to select a number other than the default number for the contact.
vlad69uk said:
Not experienced that problem, but i have experienced another problem in the phone app.
when you select a contact in the phone app, and push either left or right on the scroll wheel to select the next available number in the contact, i.e. business, home, mobile2, etc, it will just keep scrolling until you reset the phone. really annoying if you want to select a number other than the default number for the contact.
Click to expand...
Click to collapse
Yes Yes! I just tested it and it happens.
The thing is, I managed to break out of the loop.. Not sure how, but I kinda repeatedly pressed all the HW buttons, etc
Now I can't reproduce it.. hmmmm
vlad69uk said:
Not experienced that problem, but i have experienced another problem in the phone app.
when you select a contact in the phone app, and push either left or right on the scroll wheel to select the next available number in the contact, i.e. business, home, mobile2, etc, it will just keep scrolling until you reset the phone. really annoying if you want to select a number other than the default number for the contact.
Click to expand...
Click to collapse
happens here also but only if i try changing the number with the "go right" button. "go left" works. interesting because it is the third ROM and in all 3 of them i had the same problem.
My problem go so worse that I could not press any hardware buttons in the phone app. Sadly I had to hard reset. Now the problem has disappeared, but I have yet to install any apps onto my device..
I have none of the above problems
pedmond said:
I have none of the above problems
Click to expand...
Click to collapse
same here no problem.
Got the same problem on the call history but not all the time
French rom 1.37.406.1
Got another two annoying bugs:
- the clock that show minutes after minutes non stop (1Minute per second)
- a part of screen not updating on the SMS/MMS application
Okay the bug has returned sadly... After I spent hours reinstalling all of my apps.
The problem is not limited to the phone app, it happens when I tap any key on the SIP or press any hardware button - a bunch of text is pasted.
I created a txt document and tapped a button so I could copy all of the crap it pastes,
it is attached
This is driving me nuts and makes the phone unusable. Im certain this is the fault of software rather than hardware. Can anyone help?
darthbane2k said:
Okay the bug has returned sadly... After I spent hours reinstalling all of my apps.
The problem is not limited to the phone app, it happens when I tap any key on the SIP or press any hardware button - a bunch of text is pasted.
I created a txt document and tapped a button so I could copy all of the crap it pastes,
it is attached
This is driving me nuts and makes the phone unusable. Im certain this is the fault of software rather than hardware. Can anyone help?
Click to expand...
Click to collapse
To me it seems like one of the 3rd party apps that you installed is causing this. If it was me, after a hard reset I would test it after installing each app to find the guilty one.
darthbane2k said:
Okay the bug has returned sadly... After I spent hours reinstalling all of my apps.
The problem is not limited to the phone app, it happens when I tap any key on the SIP or press any hardware button - a bunch of text is pasted.
I created a txt document and tapped a button so I could copy all of the crap it pastes,
it is attached
This is driving me nuts and makes the phone unusable. Im certain this is the fault of software rather than hardware. Can anyone help?
Click to expand...
Click to collapse
is it always the same text?
I do not have either of the problems mentioned here.
ROM 1.37.401 WWE
vlad69uk said:
Not experienced that problem, but i have experienced another problem in the phone app.
when you select a contact in the phone app, and push either left or right on the scroll wheel to select the next available number in the contact, i.e. business, home, mobile2, etc, it will just keep scrolling until you reset the phone. really annoying if you want to select a number other than the default number for the contact.
Click to expand...
Click to collapse
Same here. But luckily I don't have to reset the phone. By pressing some buttons randomly I get it out of the loop. But it's annoying all the same! Doesn't happen every time though... that's quite strange. Don't know why it goes wrong, so I can't do anything about it.
i have the same problem!! hope the coming new rom can help!
Could be a third party app, I thought. So curiously I went through my installed apps list. First on the list was remote desktop mobile (the new version with the device mapping feature which doesnt actually work) - So, I uninstalled that and voila, the bug has disappeared.
Bad news is that I really need remote desktop. Perhaps I installed a bad CAB. Anyone have a decent cab that is proven to work?
darthbane2k said:
Could be a third party app, I thought. So curiously I went through my installed apps list. First on the list was remote desktop mobile (the new version with the device mapping feature which doesnt actually work) - So, I uninstalled that and voila, the bug has disappeared.
Bad news is that I really need remote desktop. Perhaps I installed a bad CAB. Anyone have a decent cab that is proven to work?
Click to expand...
Click to collapse
there is a cab in rom development sections TLR2 thread.
Evan Charlton released a big update to his awesome app for those of us lucky enough to have Google Voice accounts, go grab it!
Hopefully this is appropriate for this forum, if not, sorry, I just wanted to tell anyone else who has been waiting for an update like me!
Tommy
The release notes and documentation can be found here:
http://docs.evancharlton.com/docs/GV
Updating early this morning and I can't say I'm too happy with it. It keeps getting stuck at the setup screen and I can't get into the actual application. The only way I've been able to send an SMS through it is by removing the native Messaging app from default and using Contacts to send an SMS. Only then do I get an option to send through GV.
uberingram said:
Updating early this morning and I can't say I'm too happy with it. It keeps getting stuck at the setup screen and I can't get into the actual application. The only way I've been able to send an SMS through it is by removing the native Messaging app from default and using Contacts to send an SMS. Only then do I get an option to send through GV.
Click to expand...
Click to collapse
reboot your g1 and that fixes the settings screen getting stuck. I ran into this problem as well.
Only issue i'm having now is dialing out a number takes a long time, > 30secs even with pin turned off.
dwang said:
reboot your g1 and that fixes the settings screen getting stuck. I ran into this problem as well.
Only issue i'm having now is dialing out a number takes a long time, > 30secs even with pin turned off.
Click to expand...
Click to collapse
Still didn't fix it. I'm going to try uninstalling and reinstalling.
Edit: Still busted. I'm at a complete loss as what to try next.
Edit 2: Wow I feel stupid. I emailed Evan for help and got this:
Evan said:
The application will not let you run it until all settings have been
filled in. If you're running the latest version from the Market, any
setting with a "*" in front of it has not yet been filled in.
Click to expand...
Click to collapse
I didn't bother filling in the entry for Google PIN because I selected not to use it but the software still checks to make sure it's filled in. It's like an idiot filter and I failed miserably.
uberingram said:
Still didn't fix it. I'm going to try uninstalling and reinstalling.
Edit: Still busted. I'm at a complete loss as what to try next.
Edit 2: Wow I feel stupid. I emailed Evan for help and got this:
I didn't bother filling in the entry for Google PIN because I selected not to use it but the software still checks to make sure it's filled in. It's like an idiot filter and I failed miserably.
Click to expand...
Click to collapse
Probably not worth blaming yourself for that one. Sounds like the software isn't that clear. If it doesn't need the pin, it shouldn't need to check for it.
Has it stopped working for anyone since the newest update?
GV calls failing with error message
GV stopped working for me after the latest update a few days back. All attempts at outbound calls result in a message that says "The cost of this call is 4 cents a minute" followed by disconnect beeps. Unsure of whats going on. Maybe google changed something on him.
Would love to get it working again, just made the switch to routing all calls through GV after the previous update and then this one comes out and I lost all connectivity.
Good news is that you can download all previous versions from the link a couple of posts above. I'm trying it now.
GV working for me again...
It appears that GV is now working again. From what I've seen the failures are intermittent across all versions. I'm guessing Google is fiddling with things on their end and temporarily killing Evan's app.
Wonder if they're making their own...
GV seemed to hurt performance
I was a big fan of his GrandCentral app. When he made the GV v2 app, I was looking forward to lots of functionality which it has, but it always seemed to severely degrade my phone's UI responsiveness and when it really got bad, I would get Force Close/Wait windows for GV.
I've unloaded it and am waiting for another big release to try it again.
I found a change log with download links on his website: http://evancharlton.com/projects/gv/
Apparently that error has been corrected.
yomamaster said:
I was a big fan of his GrandCentral app. When he made the GV v2 app, I was looking forward to lots of functionality which it has, but it always seemed to severely degrade my phone's UI responsiveness and when it really got bad, I would get Force Close/Wait windows for GV.
I've unloaded it and am waiting for another big release to try it again.
Click to expand...
Click to collapse
yeah i agree, gv seems to make my phone sluggish as well.
brandenk said:
I found a change log with download links on his website: http://evancharlton.com/projects/gv/
Apparently that error has been corrected.
Click to expand...
Click to collapse
Now I get this error:
USSD Code Running.....
Connection Problem of Invalid MMI code
$.04 a minute crap is back again.
Well... after committing to routing all my calls through GV and having GREAT SUCCESS!!! for about a week the dreaded "The cost of this call is 4 cents a minute" - BEEP BEEP BEEP is back again.
Had to stop routing all calls through GV to ensure I'm not missing any important calls. This is very frustrating as I love the app and really love cutting down on costs. Can't wait until GV is 100% stable. I still think Evan's app is not the problem, rather Google fiddling with something on their end which in turn breaks GV.
Anyone who has further insight throw your two cents in here.
On a side note, I wonder if Evan is aware of XDA-DEV? Wonder if we'd be of any help to him, or if he'd be a good contributor here.
" $.04 a minute crap is back again".
is that local calls or long distance out of country?
I've had zero troubles with GV; it's more than likely GOOG is doing something with their code.
GV error...
.04 cents a minute is happening for local calls within my home area code. I'm nearly certain its Google's fault... wonder if this is a sign they're working on mobile client as well?
I'm an idiot.
Finally figured out whats happening with the error I metioned earlier in this post. The 4 cents a minute error happens when I try to call a contact that doesn't have an area code in the number. For instance 456-7890 instead of 123-456-7890 triggers the error.
Overall the GV app is great. Very stable and full of great features. Two things I'd like to see. Support for a search function in contacts is a big one. Integration of my GV contacts with my other google account contacts is another. The former is on Evan to develop. The latter is all Google and I hope they hurry up with that.
Also - just discovered that GV has some widget features in the new Hero theme, never saw them before, not sure if they were there or not.
Official Google Voice App?
Looks like Google INC. Just rolled out a google voice application on the market
http://www.cyrket.com/package/com.google.android.apps.googlevoice
EDIT: woot just got GV invite!
And it looks like they are going to offer voip callout too. The S is about to hit the fan in regards to Google's relationship with carriers.
This is a bigger deal than Chrome OS imo.
Hi from mexico, sorry for my english, the cuestion is
Somebody know how erase the register of calls under the favorites in the dialer? some like the logassist pro, please some helpme, some save my relasionship =P
This is such an annoying and useless feature.
The "frequently called" cant be erased manually. Not sure if theres any apps but very interested if there are. I absolutely hate how that page is filled with nonsense when it clearly says "favorites" yet decides on its own to add more than the ones I dub as favorites.
They're stored under application > manage applications > contact storage > clear data. Make sure you make a backup of all your contacts on Gmail as a precaution.
Thanks for the tip..but it still does not prevent this list form re-accumulating.
Id prefer a much more permanent solution.
Thnks
Thnks for the answer, but in mexico the 3g is very expensive, for the backup of my contacs ineed a wifi conection and no many places here have this conection, the problem here is erease just some frequent calls not alls, some body have a ansewr for this cuestion???
There is an app to save numbers to your sim. You could save the number to sim and delete from contacts, then refresh from sim, and bang, now you are sneaky again.
You should save your relationship by not calling people you shouldnt. Or lock your phone.
JackD3ath said:
You should save your relationship by not calling people you shouldnt.
Click to expand...
Click to collapse
hah, yes. Prediction: It will end badly even if you manage to delete those numbers.
Yep, I ad this problem as well. I had numbers of certain people as my fav that I didnt want my gf to see. Nothing bad, just you know how women get.
Anyways the app I used is called "LogAssistPro "
It would allow you to choose and pick or all contacts to keep from showing up in the favorties.
Or you could use a 3rd party dialer app that doesnt use the fav tab? I now use SuperDial now so when you press my call button it brings that app and its easier to keep the history cleaner.
Sistum Id said:
Yep, I ad this problem as well. I had numbers of certain people as my fav that I didnt want my gf to see. Nothing bad, just you know how women get.
Anyways the app I used is called "LogAssistPro "
It would allow you to choose and pick or all contacts to keep from showing up in the favorties.
Or you could use a 3rd party dialer app that doesnt use the fav tab? I now use SuperDial now so when you press my call button it brings that app and its easier to keep the history cleaner.
Click to expand...
Click to collapse
Kudos my friend. Log Assist Pro works like a charm.
For the goody two shoes who think this is all about hiding bad behavior....my G1 is a new number the previous owner must have signed up for EVERY service and owes money to every one so I get 4-5 calls a day from marketers and collectors. Grouping them all up under a
"teledouches" contact , directly to VM , and now Log assist has tremendously lessened my aggravation with that.
Gotta love Android.
Im having problems with Google Talk on my phone.
Normally, if u start a chat. and the other person is talking back, u should see the txt under your own txt. But i only see it as a balloon in my top-tray of the phone and do not see the txt written by the other person in the chat overview.
Anyone knows how to solve this?
mvenneker said:
Im having problems with Google Talk on my phone.
Normally, if u start a chat. and the other person is talking back, u should see the txt under your own txt. But i only see it as a balloon in my top-tray of the phone and do not see the txt written by the other person in the chat overview.
Anyone knows how to solve this?
Click to expand...
Click to collapse
My gf and I also have Galaxy S phones. Her device is running on I9000XXJFB firmware, mine is on I9000XWJM2. Shes having kinda like the same problem with GTalk: the screen is splitted to 2 sides (top&bottom), instead of how mine works (the good old conversation-look, when A-B-A-B persons messages follow each other).
Maybe its firmware-dependent? I did not find any option to change the layout in the settings menu.
Firmware is probably a good bet. If you want to hold off, have you tested to see what happens if you turn the setting balloon top-tray setting off? Would you see nothing at all? Or would it populate the message how it should.
You probably want the best of both worlds, it's worth a quick test if you have any reason to delay upgrading firmware.
disabling the notification button in the toptray would be a bummer anyway because then i wouldnt be notified if somebody is messaging me.
i downloaded a beta version of Hi GTalk from the market. which is working as it should work so i guess my problem isnt solved with Talk it self, but with installing an alternative app.
i think you'd still receive the sound notification. As long as you are going an alternative app route, i'd. consider uninstalling and reinstalling GTalk, it might just be corrupted.
good point. i will uninstall it and reinstall.
[edit] hehe i cant uninstall it. its "in the factoryrom" so i see. i dont see it at the installed programs list..?
gtalk still problem
Hi, I have the same problem with gtalk, also after upgrade to Froyo any ideas ?
solution
Solution:
Change time zone to the right location unbelievable, but it works !!! layout is dependent on internal time zone.
Good luck
I've been using Go Dialler/Contacts for well over a year, previously on my HTC desire and it had the same issue back then where it wouldn't register the cleared missed calls, so if you got a missed call, it would say 1 missed call, then you would check the missed call and the notification would go. Then if you got another missed call (and only 1) it would then say 2 missed calls, this would go on and on until you restarted the phone. On the desire I solved this by putting the app in system/app with root explorer.
Another annoyance is that when you dial or try to save a number, it automatically puts spaces between digits where country/area code are. I like to keep my numbers all in the same format, that means no spaces or anything, so just +XXXXXXXXXX
I use my phone for business so save a lot of numbers, this is going to be a pain to have to edit each number while saving a contact.
So just wondering, since go dialler/contacts hasn't been updated since nov '12, is there any newer and better alternatives that work the same way with the dialler predictions (and having latest dialled show up smartly when composing new message in GO SMS also - this is handy!) but which don't have the annoyances?
Any feedback appreciated!
cormie said:
I've been using Go Dialler/Contacts for well over a year, previously on my HTC desire and it had the same issue back then where it wouldn't register the cleared missed calls, so if you got a missed call, it would say 1 missed call, then you would check the missed call and the notification would go. Then if you got another missed call (and only 1) it would then say 2 missed calls, this would go on and on until you restarted the phone. On the desire I solved this by putting the app in system/app with root explorer.
Another annoyance is that when you dial or try to save a number, it automatically puts spaces between digits where country/area code are. I like to keep my numbers all in the same format, that means no spaces or anything, so just +XXXXXXXXXX
I use my phone for business so save a lot of numbers, this is going to be a pain to have to edit each number while saving a contact.
So just wondering, since go dialler/contacts hasn't been updated since nov '12, is there any newer and better alternatives that work the same way with the dialler predictions (and having latest dialled show up smartly when composing new message in GO SMS also - this is handy!) but which don't have the annoyances?
Any feedback appreciated!
Click to expand...
Click to collapse
I am new to the world of Android, having previously been a RIM and iOS user. However, since coming over to Android and seeing the open nature of the platform...loving it. Anyway, back to the matter in hand....Contacts+ works brilliantly, I would suggest giving it a look :good:
I use 'ExDialer & Contacts' app
https://play.google.com/store/apps/...251bGwsMSwxLDMsImNvbS5tb2Rvb2h1dC5kaWFsZXIiXQ..
Very simply themable dialler and contacts app.
Thanks for the suggestion. Do you know what this means?
"This is a trial version with 7 days trial period. When the trial period expired, you will be asked to buy PRO version. You can still keep trying if you haven't decided to buy"
So is it free to keep using or what? Do they keep bugging you to upgrade/pay?
I don't have experience of it,but I would guess you will get nags to upgrade, although with what frequency I couldn't say. I think that is one of the reasons I stuck with contacts+...it's free! That and the integration with FB, it's merge facility etc
cormie said:
Thanks for the suggestion. Do you know what this means?
"This is a trial version with 7 days trial period. When the trial period expired, you will be asked to buy PRO version. You can still keep trying if you haven't decided to buy"
So is it free to keep using or what? Do they keep bugging you to upgrade/pay?
Click to expand...
Click to collapse
Going to try out exdialer first I think, seems to have a lot of recommendations from what I've seen, first impressions are good anyway and it's solved the issue of the number having the spaced put automatically. I think the missed call issue might be in every dialler so I might have to put it in system app
cormie said:
Thanks for the suggestion. Do you know what this means?
"This is a trial version with 7 days trial period. When the trial period expired, you will be asked to buy PRO version. You can still keep trying if you haven't decided to buy"
So is it free to keep using or what? Do they keep bugging you to upgrade/pay?
Click to expand...
Click to collapse
Is free but every 7 days when you next open the dialler it will show a screen asking if you want to buy the full version.
Very easy to ignore if you don't want to pay for the full version.
Sent from my Motorola Razr I using Tapatalk 2
thanks, every 7 days, so 52 notifications a year, hmm, seems a bit much
It used to come up daily but i think the developer changed it to 7 days because too many people complained!
Sent from my Motorola Razr I using Tapatalk 2
Thanks, I'll give it a trial anyway and see how it fares.
Try Dialer One, a very nice app.
Thanks, it actually turns out that ex dialler doesn't solve the issue with numbers being automatically formatted with spaces etc also, the add contact screen is a bit messy of exdialler, I find go contacts better in that regard, go may even be slightly faster?
Would anyone know how to get around the auto formatting at all? There's an option in exdialler not to use area codes or something which I thought would help but it doesn't.
cormie said:
Thanks, it actually turns out that ex dialler doesn't solve the issue with numbers being automatically formatted with spaces etc also, the add contact screen is a bit messy of exdialler, I find go contacts better in that regard, go may even be slightly faster?
Would anyone know how to get around the auto formatting at all? There's an option in exdialler not to use area codes or something which I thought would help but it doesn't.
Click to expand...
Click to collapse
I don't find a problem with the spaces in the numbers so can't help with that one!
Regarding the add contact, when I click on the + button to add a contact it takes me to my default Motorola add contact screen (which is also messy!) so I'm not sure there is anything I can do about that.
When you add a contact is it taking to you an ex dialler add contact screen?
Yes, I downloaded Ex Dialler and Contacts (I'm not sure if there's a simple "ex dialer" link without the contacts?) but now I can choose either ex dialer contacts or go contacts. Unless ex dialer is using the motorola contacts?
Have now tried dialer1 and contacts+.
Contacts+ is a bit overkill for me and not customisable to get rid of contact pictures, change font etc so it just looks too clunky for me.
I'm very happy with Dialer 1, but there's two things I miss from Go Contacts:
1) The ability to search part names, so say for example you had a contact saved with a long, easily forgetable name, something like josternberg and you could never remember it, but you knew part of his name was "stern", that if you type 78376 it would show up. Unfortunately at the moment it doesn't, but it does in other aps (Go Contacts/Dialer and Contacts+). This would be especially useful for anyone who has saved contacts without putting spaces between certain words. So imagine I had a few hundred android developers phone numbers and saved them as: androiddevappname, I could get to all dialer contacts by typing "342537" for dialer, even though it's surrounded by other characters.
2) Alphabet scrolling in the contact window. At the moment there's only a little green bar that can be scrolled down/up. In Go Contacts/Dialer, there was a permanent alphabet sidebar (small but capable) which you could hit any letter to get to that section of your contacts. I've over 1,000 contacts saved with a sequential first name code starting with VTA (for my business) and after saving a new contact, I used to be able to quickly to the letter "w" scroll up a step and check that the new contact I saved was there, two actions but without the alphabet bar it's going to take a bit of scrolling to get there.
Also waiting on the release of light theme
I am pretty sure you can enable smart dialing in dialerOne settings...
Thanks negus, yes dialer1 does have smart dialing, but will only work at the start of each name, so say if I had you saved in my phone as "xdaforum negus40", I'd be able to find you by numbering in N E G U S or X D A, but not by numbering in U S 4 0 or F O R U M. I sent the dialer 1 team an email which they replied to quickly saying they'll look into adding these functions